mirror
/
RadioLib
kopia lustrzana https://github.com/jgromes/RadioLib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
RadioLib/src/modules/CC1101/CC1101.h

1019 wiersze
66 KiB
C++
Czysty Wina Historia

#if !defined(_RADIOLIB_CC1101_H) && !RADIOLIB_EXCLUDE_CC1101
#define _RADIOLIB_CC1101_H
#include "../../TypeDef.h"
#include "../../Module.h"
#include "../../protocols/PhysicalLayer/PhysicalLayer.h"
// CC1101 physical layer properties
#define RADIOLIB_CC1101_FREQUENCY_STEP_SIZE 396.7285156
#define RADIOLIB_CC1101_MAX_PACKET_LENGTH 63
#define RADIOLIB_CC1101_CRYSTAL_FREQ 26.0
#define RADIOLIB_CC1101_DIV_EXPONENT 16
// CC1101 SPI commands
#define RADIOLIB_CC1101_CMD_READ 0b10000000
#define RADIOLIB_CC1101_CMD_WRITE 0b00000000
#define RADIOLIB_CC1101_CMD_BURST 0b01000000
#define RADIOLIB_CC1101_CMD_ACCESS_STATUS_REG 0b01000000
#define RADIOLIB_CC1101_CMD_FIFO_RX 0b10000000
#define RADIOLIB_CC1101_CMD_FIFO_TX 0b00000000
#define RADIOLIB_CC1101_CMD_RESET 0x30
#define RADIOLIB_CC1101_CMD_FSTXON 0x31
#define RADIOLIB_CC1101_CMD_XOFF 0x32
#define RADIOLIB_CC1101_CMD_CAL 0x33
#define RADIOLIB_CC1101_CMD_RX 0x34
#define RADIOLIB_CC1101_CMD_TX 0x35
#define RADIOLIB_CC1101_CMD_IDLE 0x36
#define RADIOLIB_CC1101_CMD_WOR 0x38
#define RADIOLIB_CC1101_CMD_POWER_DOWN 0x39
#define RADIOLIB_CC1101_CMD_FLUSH_RX 0x3A
#define RADIOLIB_CC1101_CMD_FLUSH_TX 0x3B
#define RADIOLIB_CC1101_CMD_WOR_RESET 0x3C
#define RADIOLIB_CC1101_CMD_NOP 0x3D
// CC1101 register map
#define RADIOLIB_CC1101_REG_IOCFG2 0x00
#define RADIOLIB_CC1101_REG_IOCFG1 0x01
#define RADIOLIB_CC1101_REG_IOCFG0 0x02
#define RADIOLIB_CC1101_REG_FIFOTHR 0x03
#define RADIOLIB_CC1101_REG_SYNC1 0x04
#define RADIOLIB_CC1101_REG_SYNC0 0x05
#define RADIOLIB_CC1101_REG_PKTLEN 0x06
#define RADIOLIB_CC1101_REG_PKTCTRL1 0x07
#define RADIOLIB_CC1101_REG_PKTCTRL0 0x08
#define RADIOLIB_CC1101_REG_ADDR 0x09
#define RADIOLIB_CC1101_REG_CHANNR 0x0A
#define RADIOLIB_CC1101_REG_FSCTRL1 0x0B
#define RADIOLIB_CC1101_REG_FSCTRL0 0x0C
#define RADIOLIB_CC1101_REG_FREQ2 0x0D
#define RADIOLIB_CC1101_REG_FREQ1 0x0E
#define RADIOLIB_CC1101_REG_FREQ0 0x0F
#define RADIOLIB_CC1101_REG_MDMCFG4 0x10
#define RADIOLIB_CC1101_REG_MDMCFG3 0x11
#define RADIOLIB_CC1101_REG_MDMCFG2 0x12
#define RADIOLIB_CC1101_REG_MDMCFG1 0x13
#define RADIOLIB_CC1101_REG_MDMCFG0 0x14
#define RADIOLIB_CC1101_REG_DEVIATN 0x15
#define RADIOLIB_CC1101_REG_MCSM2 0x16
#define RADIOLIB_CC1101_REG_MCSM1 0x17
#define RADIOLIB_CC1101_REG_MCSM0 0x18
#define RADIOLIB_CC1101_REG_FOCCFG 0x19
#define RADIOLIB_CC1101_REG_BSCFG 0x1A
#define RADIOLIB_CC1101_REG_AGCCTRL2 0x1B
#define RADIOLIB_CC1101_REG_AGCCTRL1 0x1C
#define RADIOLIB_CC1101_REG_AGCCTRL0 0x1D
#define RADIOLIB_CC1101_REG_WOREVT1 0x1E
#define RADIOLIB_CC1101_REG_WOREVT0 0x1F
#define RADIOLIB_CC1101_REG_WORCTRL 0x20
#define RADIOLIB_CC1101_REG_FREND1 0x21
#define RADIOLIB_CC1101_REG_FREND0 0x22
#define RADIOLIB_CC1101_REG_FSCAL3 0x23
#define RADIOLIB_CC1101_REG_FSCAL2 0x24
#define RADIOLIB_CC1101_REG_FSCAL1 0x25
#define RADIOLIB_CC1101_REG_FSCAL0 0x26
#define RADIOLIB_CC1101_REG_RCCTRL1 0x27
#define RADIOLIB_CC1101_REG_RCCTRL0 0x28
#define RADIOLIB_CC1101_REG_FSTEST 0x29
#define RADIOLIB_CC1101_REG_PTEST 0x2A
#define RADIOLIB_CC1101_REG_AGCTEST 0x2B
#define RADIOLIB_CC1101_REG_TEST2 0x2C
#define RADIOLIB_CC1101_REG_TEST1 0x2D
#define RADIOLIB_CC1101_REG_TEST0 0x2E
#define RADIOLIB_CC1101_REG_PARTNUM 0x30
#define RADIOLIB_CC1101_REG_VERSION 0x31
#define RADIOLIB_CC1101_REG_FREQEST 0x32
#define RADIOLIB_CC1101_REG_LQI 0x33
#define RADIOLIB_CC1101_REG_RSSI 0x34
#define RADIOLIB_CC1101_REG_MARCSTATE 0x35
#define RADIOLIB_CC1101_REG_WORTIME1 0x36
#define RADIOLIB_CC1101_REG_WORTIME0 0x37
#define RADIOLIB_CC1101_REG_PKTSTATUS 0x38
#define RADIOLIB_CC1101_REG_VCO_VC_DAC 0x39
#define RADIOLIB_CC1101_REG_TXBYTES 0x3A
#define RADIOLIB_CC1101_REG_RXBYTES 0x3B
#define RADIOLIB_CC1101_REG_RCCTRL1_STATUS 0x3C
#define RADIOLIB_CC1101_REG_RCCTRL0_STATUS 0x3D
#define RADIOLIB_CC1101_REG_PATABLE 0x3E
#define RADIOLIB_CC1101_REG_FIFO 0x3F
// status byte (returned during SPI transactions) MSB LSB DESCRIPTION
#define RADIOLIB_CC1101_STATUS_CHIP_READY 0b00000000 // 7 7 chip ready
#define RADIOLIB_CC1101_STATUS_CHIP_NOT_READY 0b10000000 // 7 7 chip not ready (power/crystal not stable)
#define RADIOLIB_CC1101_STATUS_IDLE 0b00000000 // 6 4 idle
#define RADIOLIB_CC1101_STATUS_RX 0b00010000 // 6 4 Rx
#define RADIOLIB_CC1101_STATUS_TX 0b00100000 // 6 4 Tx
#define RADIOLIB_CC1101_STATUS_FSTXON 0b00110000 // 6 4 Fast Tx ready
#define RADIOLIB_CC1101_STATUS_CALIBRATE 0b01000000 // 6 4 synthesizer calibration running
#define RADIOLIB_CC1101_STATUS_SETTLING 0b01010000 // 6 4 PLL settling
#define RADIOLIB_CC1101_STATUS_RXFIFO_OVERFLOW 0b01100000 // 6 4 Rx FIFO overflow
#define RADIOLIB_CC1101_STATUS_TXFIFO_UNDERFLOW 0b01110000 // 6 4 Tx FIFO underflow
// RADIOLIB_CC1101_REG_IOCFG2
#define RADIOLIB_CC1101_GDO2_NORM 0b00000000 // 6 6 GDO2 output: active high (default)
#define RADIOLIB_CC1101_GDO2_INV 0b01000000 // 6 6 active low
// RADIOLIB_CC1101_REG_IOCFG1
#define RADIOLIB_CC1101_GDO_DS_LOW 0b00000000 // 7 7 GDOx output drive strength: low (default)
#define RADIOLIB_CC1101_GDO_DS_HIGH 0b10000000 // 7 7 high
#define RADIOLIB_CC1101_GDO1_NORM 0b00000000 // 6 6 GDO1 output: active high (default)
#define RADIOLIB_CC1101_GDO1_INV 0b01000000 // 6 6 active low
// RADIOLIB_CC1101_REG_IOCFG0
#define RADIOLIB_CC1101_GDO0_TEMP_SENSOR_OFF 0b00000000 // 7 7 analog temperature sensor output: disabled (default)
#define RADIOLIB_CC1101_GDO0_TEMP_SENSOR_ON 0b10000000 // 7 7 enabled
#define RADIOLIB_CC1101_GDO0_NORM 0b00000000 // 6 6 GDO0 output: active high (default)
#define RADIOLIB_CC1101_GDO0_INV 0b01000000 // 6 6 active low
// RADIOLIB_CC1101_REG_IOCFG2 + REG_IOCFG1 + REG_IOCFG0
#define RADIOLIB_CC1101_GDOX_RX_FIFO_FULL 0x00 // 5 0 Rx FIFO full or above threshold
#define RADIOLIB_CC1101_GDOX_RX_FIFO_FULL_OR_PKT_END 0x01 // 5 0 Rx FIFO full or above threshold or reached packet end
#define RADIOLIB_CC1101_GDOX_TX_FIFO_ABOVE_THR 0x02 // 5 0 Tx FIFO above threshold
#define RADIOLIB_CC1101_GDOX_TX_FIFO_FULL 0x03 // 5 0 Tx FIFO full
#define RADIOLIB_CC1101_GDOX_RX_FIFO_OVERFLOW 0x04 // 5 0 Rx FIFO overflowed
#define RADIOLIB_CC1101_GDOX_TX_FIFO_UNDERFLOW 0x05 // 5 0 Tx FIFO underflowed
#define RADIOLIB_CC1101_GDOX_SYNC_WORD_SENT_OR_PKT_RECEIVED 0x06 // 5 0 sync word was sent or packet was received
#define RADIOLIB_CC1101_GDOX_PKT_RECEIVED_CRC_OK 0x07 // 5 0 packet received and CRC check passed
#define RADIOLIB_CC1101_GDOX_PREAMBLE_QUALITY_REACHED 0x08 // 5 0 received preamble quality is above threshold
#define RADIOLIB_CC1101_GDOX_CHANNEL_CLEAR 0x09 // 5 0 RSSI level below threshold (channel is clear)
#define RADIOLIB_CC1101_GDOX_PLL_LOCKED 0x0A // 5 0 PLL is locked
#define RADIOLIB_CC1101_GDOX_SERIAL_CLOCK 0x0B // 5 0 serial data clock
#define RADIOLIB_CC1101_GDOX_SERIAL_DATA_SYNC 0x0C // 5 0 serial data output in: synchronous mode
#define RADIOLIB_CC1101_GDOX_SERIAL_DATA_ASYNC 0x0D // 5 0 asynchronous mode
#define RADIOLIB_CC1101_GDOX_CARRIER_SENSE 0x0E // 5 0 RSSI above threshold
#define RADIOLIB_CC1101_GDOX_CRC_OK 0x0F // 5 0 CRC check passed
#define RADIOLIB_CC1101_GDOX_RX_HARD_DATA1 0x16 // 5 0 direct access to demodulated data
#define RADIOLIB_CC1101_GDOX_RX_HARD_DATA0 0x17 // 5 0 direct access to demodulated data
#define RADIOLIB_CC1101_GDOX_PA_PD 0x1B // 5 0 power amplifier circuit is powered down
#define RADIOLIB_CC1101_GDOX_LNA_PD 0x1C // 5 0 low-noise amplifier circuit is powered down
#define RADIOLIB_CC1101_GDOX_RX_SYMBOL_TICK 0x1D // 5 0 direct access to symbol tick of received data
#define RADIOLIB_CC1101_GDOX_WOR_EVNT0 0x24 // 5 0 wake-on-radio event 0
#define RADIOLIB_CC1101_GDOX_WOR_EVNT1 0x25 // 5 0 wake-on-radio event 1
#define RADIOLIB_CC1101_GDOX_CLK_256 0x26 // 5 0 256 Hz clock
#define RADIOLIB_CC1101_GDOX_CLK_32K 0x27 // 5 0 32 kHz clock
#define RADIOLIB_CC1101_GDOX_CHIP_RDYN 0x29 // 5 0 (default for GDO2)
#define RADIOLIB_CC1101_GDOX_XOSC_STABLE 0x2B // 5 0
#define RADIOLIB_CC1101_GDOX_HIGH_Z 0x2E // 5 0 high impedance state (default for GDO1)
#define RADIOLIB_CC1101_GDOX_HW_TO_0 0x2F // 5 0
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_1 0x30 // 5 0 crystal oscillator clock: f = f(XOSC)/1
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_1_5 0x31 // 5 0 f = f(XOSC)/1.5
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_2 0x32 // 5 0 f = f(XOSC)/2
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_3 0x33 // 5 0 f = f(XOSC)/3
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_4 0x34 // 5 0 f = f(XOSC)/4
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_6 0x35 // 5 0 f = f(XOSC)/6
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_8 0x36 // 5 0 f = f(XOSC)/8
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_12 0x37 // 5 0 f = f(XOSC)/12
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_16 0x38 // 5 0 f = f(XOSC)/16
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_24 0x39 // 5 0 f = f(XOSC)/24
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_32 0x3A // 5 0 f = f(XOSC)/32
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_48 0x3B // 5 0 f = f(XOSC)/48
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_64 0x3C // 5 0 f = f(XOSC)/64
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_96 0x3D // 5 0 f = f(XOSC)/96
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_128 0x3E // 5 0 f = f(XOSC)/128
#define RADIOLIB_CC1101_GDOX_CLOCK_XOSC_192 0x3F // 5 0 f = f(XOSC)/192 (default for GDO0)
// RADIOLIB_CC1101_REG_FIFOTHR
#define RADIOLIB_CC1101_ADC_RETENTION_OFF 0b00000000 // 6 6 do not retain ADC settings in sleep mode (default)
#define RADIOLIB_CC1101_ADC_RETENTION_ON 0b01000000 // 6 6 retain ADC settings in sleep mode
#define RADIOLIB_CC1101_RX_ATTEN_0_DB 0b00000000 // 5 4 Rx attenuation: 0 dB (default)
#define RADIOLIB_CC1101_RX_ATTEN_6_DB 0b00010000 // 5 4 6 dB
#define RADIOLIB_CC1101_RX_ATTEN_12_DB 0b00100000 // 5 4 12 dB
#define RADIOLIB_CC1101_RX_ATTEN_18_DB 0b00110000 // 5 4 18 dB
#define RADIOLIB_CC1101_FIFO_THR_TX_61_RX_4 0b00000000 // 3 0 TX fifo threshold: 61, RX fifo threshold: 4
#define RADIOLIB_CC1101_FIFO_THR_TX_33_RX_32 0b00000111 // 3 0 TX fifo threshold: 33, RX fifo threshold: 32
#define RADIOLIB_CC1101_FIFO_THRESH_TX 33
#define RADIOLIB_CC1101_FIFO_THRESH_RX 32
// RADIOLIB_CC1101_REG_SYNC1
#define RADIOLIB_CC1101_SYNC_WORD_MSB 0xD3 // 7 0 sync word MSB
// RADIOLIB_CC1101_REG_SYNC0
#define RADIOLIB_CC1101_SYNC_WORD_LSB 0x91 // 7 0 sync word LSB
// RADIOLIB_CC1101_REG_PKTLEN
#define RADIOLIB_CC1101_PACKET_LENGTH 0xFF // 7 0 packet length in bytes
// RADIOLIB_CC1101_REG_PKTCTRL1
#define RADIOLIB_CC1101_PQT 0x00 // 7 5 preamble quality threshold
#define RADIOLIB_CC1101_CRC_AUTOFLUSH_OFF 0b00000000 // 3 3 automatic Rx FIFO flush on CRC check fail: disabled (default)
#define RADIOLIB_CC1101_CRC_AUTOFLUSH_ON 0b00001000 // 3 3 enabled
#define RADIOLIB_CC1101_APPEND_STATUS_OFF 0b00000000 // 2 2 append 2 status bytes to packet: disabled
#define RADIOLIB_CC1101_APPEND_STATUS_ON 0b00000100 // 2 2 enabled (default)
#define RADIOLIB_CC1101_ADR_CHK_NONE 0b00000000 // 1 0 address check: none (default)
#define RADIOLIB_CC1101_ADR_CHK_NO_BROADCAST 0b00000001 // 1 0 without broadcast
#define RADIOLIB_CC1101_ADR_CHK_SINGLE_BROADCAST 0b00000010 // 1 0 broadcast address 0x00
#define RADIOLIB_CC1101_ADR_CHK_DOUBLE_BROADCAST 0b00000011 // 1 0 broadcast addresses 0x00 and 0xFF
// RADIOLIB_CC1101_REG_PKTCTRL0
#define RADIOLIB_CC1101_WHITE_DATA_OFF 0b00000000 // 6 6 data whitening: disabled
#define RADIOLIB_CC1101_WHITE_DATA_ON 0b01000000 // 6 6 enabled (default)
#define RADIOLIB_CC1101_PKT_FORMAT_NORMAL 0b00000000 // 5 4 packet format: normal (FIFOs)
#define RADIOLIB_CC1101_PKT_FORMAT_SYNCHRONOUS 0b00010000 // 5 4 synchronous serial
#define RADIOLIB_CC1101_PKT_FORMAT_RANDOM 0b00100000 // 5 4 random transmissions
#define RADIOLIB_CC1101_PKT_FORMAT_ASYNCHRONOUS 0b00110000 // 5 4 asynchronous serial
#define RADIOLIB_CC1101_CRC_OFF 0b00000000 // 2 2 CRC disabled
#define RADIOLIB_CC1101_CRC_ON 0b00000100 // 2 2 CRC enabled (default)
#define RADIOLIB_CC1101_LENGTH_CONFIG_FIXED 0b00000000 // 1 0 packet length: fixed
#define RADIOLIB_CC1101_LENGTH_CONFIG_VARIABLE 0b00000001 // 1 0 variable (default)
#define RADIOLIB_CC1101_LENGTH_CONFIG_INFINITE 0b00000010 // 1 0 infinite
// RADIOLIB_CC1101_REG_ADDR
#define RADIOLIB_CC1101_DEVICE_ADDR 0x00 // 7 0 device address
// RADIOLIB_CC1101_REG_CHANNR
#define RADIOLIB_CC1101_CHAN 0x00 // 7 0 channel number
// RADIOLIB_CC1101_REG_FSCTRL1
#define RADIOLIB_CC1101_FREQ_IF 0x0F // 4 0 IF frequency setting; f_IF = (f(XOSC) / 2^10) * CC1101_FREQ_IF
// CC1101_REG_FSCTRL0
#define RADIOLIB_CC1101_FREQOFF 0x00 // 7 0 base frequency offset (2s-compliment)
// RADIOLIB_CC1101_REG_FREQ2 + REG_FREQ1 + REG_FREQ0
#define RADIOLIB_CC1101_FREQ_MSB 0x1E // 5 0 base frequency setting: f_carrier = (f(XOSC) / 2^16) * FREQ
#define RADIOLIB_CC1101_FREQ_MID 0xC4 // 7 0 where f(XOSC) = 26 MHz
#define RADIOLIB_CC1101_FREQ_LSB 0xEC // 7 0 FREQ = 3-byte value of FREQ registers
// RADIOLIB_CC1101_REG_MDMCFG4
#define RADIOLIB_CC1101_CHANBW_E 0b10000000 // 7 6 channel bandwidth: BW_channel = f(XOSC) / (8 * (4 + CHANBW_M)*2^CHANBW_E) [Hz]
#define RADIOLIB_CC1101_CHANBW_M 0b00000000 // 5 4 default value for 26 MHz crystal: 203 125 Hz
#define RADIOLIB_CC1101_DRATE_E 0x0C // 3 0 symbol rate: R_data = (((256 + DRATE_M) * 2^DRATE_E) / 2^28) * f(XOSC) [Baud]
// RADIOLIB_CC1101_REG_MDMCFG3
#define RADIOLIB_CC1101_DRATE_M 0x22 // 7 0 default value for 26 MHz crystal: 115 051 Baud
// RADIOLIB_CC1101_REG_MDMCFG2
#define RADIOLIB_CC1101_DEM_DCFILT_OFF 0b10000000 // 7 7 digital DC filter: disabled
#define RADIOLIB_CC1101_DEM_DCFILT_ON 0b00000000 // 7 7 enabled - only for data rates above 250 kBaud (default)
#define RADIOLIB_CC1101_MOD_FORMAT_2_FSK 0b00000000 // 6 4 modulation format: 2-FSK (default)
#define RADIOLIB_CC1101_MOD_FORMAT_GFSK 0b00010000 // 6 4 GFSK
#define RADIOLIB_CC1101_MOD_FORMAT_ASK_OOK 0b00110000 // 6 4 ASK/OOK
#define RADIOLIB_CC1101_MOD_FORMAT_4_FSK 0b01000000 // 6 4 4-FSK
#define RADIOLIB_CC1101_MOD_FORMAT_MFSK 0b01110000 // 6 4 MFSK - only for data rates above 26 kBaud
#define RADIOLIB_CC1101_MANCHESTER_EN_OFF 0b00000000 // 3 3 Manchester encoding: disabled (default)
#define RADIOLIB_CC1101_MANCHESTER_EN_ON 0b00001000 // 3 3 enabled
#define RADIOLIB_CC1101_SYNC_MODE_NONE 0b00000000 // 2 0 synchronization: no preamble/sync
#define RADIOLIB_CC1101_SYNC_MODE_15_16 0b00000001 // 2 0 15/16 sync word bits
#define RADIOLIB_CC1101_SYNC_MODE_16_16 0b00000010 // 2 0 16/16 sync word bits (default)
#define RADIOLIB_CC1101_SYNC_MODE_30_32 0b00000011 // 2 0 30/32 sync word bits
#define RADIOLIB_CC1101_SYNC_MODE_NONE_THR 0b00000100 // 2 0 no preamble sync, carrier sense above threshold
#define RADIOLIB_CC1101_SYNC_MODE_15_16_THR 0b00000101 // 2 0 15/16 sync word bits, carrier sense above threshold
#define RADIOLIB_CC1101_SYNC_MODE_16_16_THR 0b00000110 // 2 0 16/16 sync word bits, carrier sense above threshold
#define RADIOLIB_CC1101_SYNC_MODE_30_32_THR 0b00000111 // 2 0 30/32 sync word bits, carrier sense above threshold
// RADIOLIB_CC1101_REG_MDMCFG1
#define RADIOLIB_CC1101_FEC_OFF 0b00000000 // 7 7 forward error correction: disabled (default)
#define RADIOLIB_CC1101_FEC_ON 0b10000000 // 7 7 enabled - only for fixed packet length
#define RADIOLIB_CC1101_NUM_PREAMBLE_2 0b00000000 // 6 4 number of preamble bytes: 2
#define RADIOLIB_CC1101_NUM_PREAMBLE_3 0b00010000 // 6 4 3
#define RADIOLIB_CC1101_NUM_PREAMBLE_4 0b00100000 // 6 4 4 (default)
#define RADIOLIB_CC1101_NUM_PREAMBLE_6 0b00110000 // 6 4 6
#define RADIOLIB_CC1101_NUM_PREAMBLE_8 0b01000000 // 6 4 8
#define RADIOLIB_CC1101_NUM_PREAMBLE_12 0b01010000 // 6 4 12
#define RADIOLIB_CC1101_NUM_PREAMBLE_16 0b01100000 // 6 4 16
#define RADIOLIB_CC1101_NUM_PREAMBLE_24 0b01110000 // 6 4 24
#define RADIOLIB_CC1101_CHANSPC_E 0x02 // 1 0 channel spacing: df_channel = (f(XOSC) / 2^18) * (256 + CHANSPC_M) * 2^CHANSPC_E [Hz]
// RADIOLIB_CC1101_REG_MDMCFG0
#define RADIOLIB_CC1101_CHANSPC_M 0xF8 // 7 0 default value for 26 MHz crystal: 199 951 kHz
// RADIOLIB_CC1101_REG_DEVIATN
#define RADIOLIB_CC1101_DEVIATION_E 0b01000000 // 6 4 frequency deviation: f_dev = (f(XOSC) / 2^17) * (8 + DEVIATION_M) * 2^DEVIATION_E [Hz]
#define RADIOLIB_CC1101_DEVIATION_M 0b00000111 // 2 0 default value for 26 MHz crystal: +- 47 607 Hz
#define RADIOLIB_CC1101_MSK_PHASE_CHANGE_PERIOD 0x07 // 2 0 phase change symbol period fraction: 1 / (MSK_PHASE_CHANGE_PERIOD + 1)
// RADIOLIB_CC1101_REG_MCSM2
#define RADIOLIB_CC1101_RX_TIMEOUT_RSSI_OFF 0b00000000 // 4 4 Rx timeout based on RSSI value: disabled (default)
#define RADIOLIB_CC1101_RX_TIMEOUT_RSSI_ON 0b00010000 // 4 4 enabled
#define RADIOLIB_CC1101_RX_TIMEOUT_QUAL_OFF 0b00000000 // 3 3 check for sync word on Rx timeout
#define RADIOLIB_CC1101_RX_TIMEOUT_QUAL_ON 0b00001000 // 3 3 check for PQI set on Rx timeout
#define RADIOLIB_CC1101_RX_TIMEOUT_OFF 0b00000111 // 2 0 Rx timeout: disabled (default)
#define RADIOLIB_CC1101_RX_TIMEOUT_MAX 0b00000000 // 2 0 max value (actual value depends on WOR_RES, EVENT0 and f(XOSC))
// RADIOLIB_CC1101_REG_MCSM1
#define RADIOLIB_CC1101_CCA_MODE_ALWAYS 0b00000000 // 5 4 clear channel indication: always
#define RADIOLIB_CC1101_CCA_MODE_RSSI_THR 0b00010000 // 5 4 RSSI below threshold
#define RADIOLIB_CC1101_CCA_MODE_RX_PKT 0b00100000 // 5 4 unless receiving packet
#define RADIOLIB_CC1101_CCA_MODE_RSSI_THR_RX_PKT 0b00110000 // 5 4 RSSI below threshold unless receiving packet (default)
#define RADIOLIB_CC1101_RXOFF_IDLE 0b00000000 // 3 2 next mode after packet reception: idle (default)
#define RADIOLIB_CC1101_RXOFF_FSTXON 0b00000100 // 3 2 FSTxOn
#define RADIOLIB_CC1101_RXOFF_TX 0b00001000 // 3 2 Tx
#define RADIOLIB_CC1101_RXOFF_RX 0b00001100 // 3 2 Rx
#define RADIOLIB_CC1101_TXOFF_IDLE 0b00000000 // 1 0 next mode after packet transmission: idle (default)
#define RADIOLIB_CC1101_TXOFF_FSTXON 0b00000001 // 1 0 FSTxOn
#define RADIOLIB_CC1101_TXOFF_TX 0b00000010 // 1 0 Tx
#define RADIOLIB_CC1101_TXOFF_RX 0b00000011 // 1 0 Rx
// RADIOLIB_CC1101_REG_MCSM0
#define RADIOLIB_CC1101_FS_AUTOCAL_NEVER 0b00000000 // 5 4 automatic calibration: never (default)
#define RADIOLIB_CC1101_FS_AUTOCAL_IDLE_TO_RXTX 0b00010000 // 5 4 every transition from idle to Rx/Tx
#define RADIOLIB_CC1101_FS_AUTOCAL_RXTX_TO_IDLE 0b00100000 // 5 4 every transition from Rx/Tx to idle
#define RADIOLIB_CC1101_FS_AUTOCAL_RXTX_TO_IDLE_4TH 0b00110000 // 5 4 every 4th transition from Rx/Tx to idle
#define RADIOLIB_CC1101_PO_TIMEOUT_COUNT_1 0b00000000 // 3 2 number of counter expirations before CHP_RDYN goes low: 1 (default)
#define RADIOLIB_CC1101_PO_TIMEOUT_COUNT_16 0b00000100 // 3 2 16
#define RADIOLIB_CC1101_PO_TIMEOUT_COUNT_64 0b00001000 // 3 2 64
#define RADIOLIB_CC1101_PO_TIMEOUT_COUNT_256 0b00001100 // 3 2 256
#define RADIOLIB_CC1101_PIN_CTRL_OFF 0b00000000 // 1 1 pin radio control: disabled (default)
#define RADIOLIB_CC1101_PIN_CTRL_ON 0b00000010 // 1 1 enabled
#define RADIOLIB_CC1101_XOSC_FORCE_OFF 0b00000000 // 0 0 do not force XOSC to remain on in sleep (default)
#define RADIOLIB_CC1101_XOSC_FORCE_ON 0b00000001 // 0 0 force XOSC to remain on in sleep
// RADIOLIB_CC1101_REG_FOCCFG
#define RADIOLIB_CC1101_FOC_BS_CS_GATE_OFF 0b00000000 // 5 5 do not freeze frequency compensation until CS goes high
#define RADIOLIB_CC1101_FOC_BS_CS_GATE_ON 0b00100000 // 5 5 freeze frequency compensation until CS goes high (default)
#define RADIOLIB_CC1101_FOC_PRE_K 0b00000000 // 4 3 frequency compensation loop gain before sync word: K
#define RADIOLIB_CC1101_FOC_PRE_2K 0b00001000 // 4 3 2K
#define RADIOLIB_CC1101_FOC_PRE_3K 0b00010000 // 4 3 3K (default)
#define RADIOLIB_CC1101_FOC_PRE_4K 0b00011000 // 4 3 4K
#define RADIOLIB_CC1101_FOC_POST_K 0b00000000 // 2 2 frequency compensation loop gain after sync word: same as FOC_PRE
#define RADIOLIB_CC1101_FOC_POST_K_2 0b00000100 // 2 2 K/2 (default)
#define RADIOLIB_CC1101_FOC_LIMIT_NO_COMPENSATION 0b00000000 // 1 0 frequency compensation saturation point: no compensation - required for ASK/OOK
#define RADIOLIB_CC1101_FOC_LIMIT_BW_CHAN_8 0b00000001 // 1 0 +- BW_chan/8
#define RADIOLIB_CC1101_FOC_LIMIT_BW_CHAN_4 0b00000010 // 1 0 +- BW_chan/4 (default)
#define RADIOLIB_CC1101_FOC_LIMIT_BW_CHAN_2 0b00000011 // 1 0 +- BW_chan/2
// RADIOLIB_CC1101_REG_BSCFG
#define RADIOLIB_CC1101_BS_PRE_KI 0b00000000 // 7 6 clock recovery integral gain before sync word: Ki
#define RADIOLIB_CC1101_BS_PRE_2KI 0b01000000 // 7 6 2Ki (default)
#define RADIOLIB_CC1101_BS_PRE_3KI 0b10000000 // 7 6 3Ki
#define RADIOLIB_CC1101_BS_PRE_4KI 0b11000000 // 7 6 4Ki
#define RADIOLIB_CC1101_BS_PRE_KP 0b00000000 // 5 4 clock recovery proportional gain before sync word: Kp
#define RADIOLIB_CC1101_BS_PRE_2KP 0b00010000 // 5 4 2Kp
#define RADIOLIB_CC1101_BS_PRE_3KP 0b00100000 // 5 4 3Kp (default)
#define RADIOLIB_CC1101_BS_PRE_4KP 0b00110000 // 5 4 4Kp
#define RADIOLIB_CC1101_BS_POST_KI 0b00000000 // 3 3 clock recovery integral gain after sync word: same as BS_PRE
#define RADIOLIB_CC1101_BS_POST_KI_2 0b00001000 // 3 3 Ki/2 (default)
#define RADIOLIB_CC1101_BS_POST_KP 0b00000000 // 2 2 clock recovery proportional gain after sync word: same as BS_PRE
#define RADIOLIB_CC1101_BS_POST_KP_1 0b00000100 // 2 2 Kp (default)
#define RADIOLIB_CC1101_BS_LIMIT_NO_COMPENSATION 0b00000000 // 1 0 data rate compensation saturation point: no compensation
#define RADIOLIB_CC1101_BS_LIMIT_3_125 0b00000001 // 1 0 +- 3.125 %
#define RADIOLIB_CC1101_BS_LIMIT_6_25 0b00000010 // 1 0 +- 6.25 %
#define RADIOLIB_CC1101_BS_LIMIT_12_5 0b00000011 // 1 0 +- 12.5 %
// RADIOLIB_CC1101_REG_AGCCTRL2
#define RADIOLIB_CC1101_MAX_DVGA_GAIN_0 0b00000000 // 7 6 reduce maximum available DVGA gain: no reduction (default)
#define RADIOLIB_CC1101_MAX_DVGA_GAIN_1 0b01000000 // 7 6 disable top gain setting
#define RADIOLIB_CC1101_MAX_DVGA_GAIN_2 0b10000000 // 7 6 disable top two gain setting
#define RADIOLIB_CC1101_MAX_DVGA_GAIN_3 0b11000000 // 7 6 disable top three gain setting
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_0_DB 0b00000000 // 5 3 reduce maximum LNA gain by: 0 dB (default)
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_2_6_DB 0b00001000 // 5 3 2.6 dB
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_6_1_DB 0b00010000 // 5 3 6.1 dB
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_7_4_DB 0b00011000 // 5 3 7.4 dB
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_9_2_DB 0b00100000 // 5 3 9.2 dB
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_11_5_DB 0b00101000 // 5 3 11.5 dB
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_14_6_DB 0b00110000 // 5 3 14.6 dB
#define RADIOLIB_CC1101_LNA_GAIN_REDUCE_17_1_DB 0b00111000 // 5 3 17.1 dB
#define RADIOLIB_CC1101_MAGN_TARGET_24_DB 0b00000000 // 2 0 average amplitude target for filter: 24 dB
#define RADIOLIB_CC1101_MAGN_TARGET_27_DB 0b00000001 // 2 0 27 dB
#define RADIOLIB_CC1101_MAGN_TARGET_30_DB 0b00000010 // 2 0 30 dB
#define RADIOLIB_CC1101_MAGN_TARGET_33_DB 0b00000011 // 2 0 33 dB (default)
#define RADIOLIB_CC1101_MAGN_TARGET_36_DB 0b00000100 // 2 0 36 dB
#define RADIOLIB_CC1101_MAGN_TARGET_38_DB 0b00000101 // 2 0 38 dB
#define RADIOLIB_CC1101_MAGN_TARGET_40_DB 0b00000110 // 2 0 40 dB
#define RADIOLIB_CC1101_MAGN_TARGET_42_DB 0b00000111 // 2 0 42 dB
// RADIOLIB_CC1101_REG_AGCCTRL1
#define RADIOLIB_CC1101_AGC_LNA_PRIORITY_LNA2 0b00000000 // 6 6 LNA priority setting: LNA2 first
#define RADIOLIB_CC1101_AGC_LNA_PRIORITY_LNA 0b01000000 // 6 6 LNA first (default)
#define RADIOLIB_CC1101_CARRIER_SENSE_REL_THR_OFF 0b00000000 // 5 4 RSSI relative change to assert carrier sense: disabled (default)
#define RADIOLIB_CC1101_CARRIER_SENSE_REL_THR_6_DB 0b00010000 // 5 4 6 dB
#define RADIOLIB_CC1101_CARRIER_SENSE_REL_THR_10_DB 0b00100000 // 5 4 10 dB
#define RADIOLIB_CC1101_CARRIER_SENSE_REL_THR_14_DB 0b00110000 // 5 4 14 dB
#define RADIOLIB_CC1101_CARRIER_SENSE_ABS_THR 0x00 // 3 0 RSSI threshold to assert carrier sense in 2s compliment, Thr = MAGN_TARGET + CARRIER_SENSE_ABS_TH [dB]
// RADIOLIB_CC1101_REG_AGCCTRL0
#define RADIOLIB_CC1101_HYST_LEVEL_NONE 0b00000000 // 7 6 AGC hysteresis level: none
#define RADIOLIB_CC1101_HYST_LEVEL_LOW 0b01000000 // 7 6 low
#define RADIOLIB_CC1101_HYST_LEVEL_MEDIUM 0b10000000 // 7 6 medium (default)
#define RADIOLIB_CC1101_HYST_LEVEL_HIGH 0b11000000 // 7 6 high
#define RADIOLIB_CC1101_WAIT_TIME_8_SAMPLES 0b00000000 // 5 4 AGC wait time: 8 samples
#define RADIOLIB_CC1101_WAIT_TIME_16_SAMPLES 0b00010000 // 5 4 16 samples (default)
#define RADIOLIB_CC1101_WAIT_TIME_24_SAMPLES 0b00100000 // 5 4 24 samples
#define RADIOLIB_CC1101_WAIT_TIME_32_SAMPLES 0b00110000 // 5 4 32 samples
#define RADIOLIB_CC1101_AGC_FREEZE_NEVER 0b00000000 // 3 2 freeze AGC gain: never (default)
#define RADIOLIB_CC1101_AGC_FREEZE_SYNC_WORD 0b00000100 // 3 2 when sync word is found
#define RADIOLIB_CC1101_AGC_FREEZE_MANUAL_A 0b00001000 // 3 2 manually freeze analog control
#define RADIOLIB_CC1101_AGC_FREEZE_MANUAL_AD 0b00001100 // 3 2 manually freeze analog and digital control
#define RADIOLIB_CC1101_FILTER_LENGTH_8 0b00000000 // 1 0 averaging length for channel filter: 8 samples
#define RADIOLIB_CC1101_FILTER_LENGTH_16 0b00000001 // 1 0 16 samples (default)
#define RADIOLIB_CC1101_FILTER_LENGTH_32 0b00000010 // 1 0 32 samples
#define RADIOLIB_CC1101_FILTER_LENGTH_64 0b00000011 // 1 0 64 samples
#define RADIOLIB_CC1101_ASK_OOK_BOUNDARY_4_DB 0b00000000 // 1 0 ASK/OOK decision boundary: 4 dB
#define RADIOLIB_CC1101_ASK_OOK_BOUNDARY_8_DB 0b00000001 // 1 0 8 dB (default)
#define RADIOLIB_CC1101_ASK_OOK_BOUNDARY_12_DB 0b00000010 // 1 0 12 dB
#define RADIOLIB_CC1101_ASK_OOK_BOUNDARY_16_DB 0b00000011 // 1 0 16 dB
// RADIOLIB_CC1101_REG_WOREVT1 + REG_WOREVT0
#define RADIOLIB_CC1101_EVENT0_TIMEOUT_MSB 0x87 // 7 0 EVENT0 timeout: t_event0 = (750 / f(XOSC)) * EVENT0_TIMEOUT * 2^(5 * WOR_RES) [s]
#define RADIOLIB_CC1101_EVENT0_TIMEOUT_LSB 0x6B // 7 0 default value for 26 MHz crystal: 1.0 s
// RADIOLIB_CC1101_REG_WORCTRL
#define RADIOLIB_CC1101_RC_POWER_UP 0b00000000 // 7 7 power up RC oscillator
#define RADIOLIB_CC1101_RC_POWER_DOWN 0b10000000 // 7 7 power down RC oscillator
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_4 0b00000000 // 6 4 EVENT1 timeout: 4 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_6 0b00010000 // 6 4 6 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_8 0b00100000 // 6 4 8 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_12 0b00110000 // 6 4 12 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_16 0b01000000 // 6 4 16 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_24 0b01010000 // 6 4 24 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_32 0b01100000 // 6 4 32 RC periods
#define RADIOLIB_CC1101_EVENT1_TIMEOUT_48 0b01110000 // 6 4 48 RC periods (default)
#define RADIOLIB_CC1101_RC_CAL_OFF 0b00000000 // 3 3 disable RC oscillator calibration
#define RADIOLIB_CC1101_RC_CAL_ON 0b00001000 // 3 3 enable RC oscillator calibration (default)
#define RADIOLIB_CC1101_WOR_RES_1 0b00000000 // 1 0 EVENT0 resolution: 1 period (default)
#define RADIOLIB_CC1101_WOR_RES_2_5 0b00000001 // 1 0 2^5 periods
#define RADIOLIB_CC1101_WOR_RES_2_10 0b00000010 // 1 0 2^10 periods
#define RADIOLIB_CC1101_WOR_RES_2_15 0b00000011 // 1 0 2^15 periods
// RADIOLIB_CC1101_REG_FREND1
#define RADIOLIB_CC1101_LNA_CURRENT 0x01 // 7 6 front-end LNA PTAT current output adjustment
#define RADIOLIB_CC1101_LNA2MIX_CURRENT 0x01 // 5 4 front-end PTAT output adjustment
#define RADIOLIB_CC1101_LODIV_BUF_CURRENT_RX 0x01 // 3 2 Rx LO buffer current adjustment
#define RADIOLIB_CC1101_MIX_CURRENT 0x02 // 1 0 mixer current adjustment
// RADIOLIB_CC1101_REG_FREND0
#define RADIOLIB_CC1101_LODIV_BUF_CURRENT_TX 0x01 // 5 4 Tx LO buffer current adjustment
#define RADIOLIB_CC1101_PA_POWER 0x00 // 2 0 set power amplifier power according to PATABLE
// RADIOLIB_CC1101_REG_FSCAL3
#define RADIOLIB_CC1101_CHP_CURR_CAL_OFF 0b00000000 // 5 4 disable charge pump calibration
#define RADIOLIB_CC1101_CHP_CURR_CAL_ON 0b00100000 // 5 4 enable charge pump calibration (default)
#define RADIOLIB_CC1101_FSCAL3 0x09 // 3 0 charge pump output current: I_out = I_0 * 2^(FSCAL3/4) [A]
// RADIOLIB_CC1101_REG_FSCAL2
#define RADIOLIB_CC1101_VCO_CORE_LOW 0b00000000 // 5 5 VCO: low (default)
#define RADIOLIB_CC1101_VCO_CORE_HIGH 0b00100000 // 5 5 high
#define RADIOLIB_CC1101_FSCAL2 0x0A // 4 0 VCO current result/override
// RADIOLIB_CC1101_REG_FSCAL1
#define RADIOLIB_CC1101_FSCAL1 0x20 // 5 0 capacitor array setting for coarse VCO tuning
// RADIOLIB_CC1101_REG_FSCAL0
#define RADIOLIB_CC1101_FSCAL0 0x0D // 6 0 frequency synthesizer calibration setting
// RADIOLIB_CC1101_REG_RCCTRL1
#define RADIOLIB_CC1101_RCCTRL1 0x41 // 6 0 RC oscillator configuration
// RADIOLIB_CC1101_REG_RCCTRL0
#define RADIOLIB_CC1101_RCCTRL0 0x00 // 6 0 RC oscillator configuration
// RADIOLIB_CC1101_REG_PTEST
#define RADIOLIB_CC1101_TEMP_SENS_IDLE_OFF 0x7F // 7 0 temperature sensor will not be available in idle mode (default)
#define RADIOLIB_CC1101_TEMP_SENS_IDLE_ON 0xBF // 7 0 temperature sensor will be available in idle mode
// RADIOLIB_CC1101_REG_TEST0
#define RADIOLIB_CC1101_VCO_SEL_CAL_OFF 0b00000000 // 1 1 disable VCO selection calibration stage
#define RADIOLIB_CC1101_VCO_SEL_CAL_ON 0b00000010 // 1 1 enable VCO selection calibration stage
// RADIOLIB_CC1101_REG_PARTNUM
#define RADIOLIB_CC1101_PARTNUM 0x00
// RADIOLIB_CC1101_REG_VERSION
#define RADIOLIB_CC1101_VERSION_CURRENT 0x14
#define RADIOLIB_CC1101_VERSION_LEGACY 0x04
#define RADIOLIB_CC1101_VERSION_CLONE 0x17
// RADIOLIB_CC1101_REG_MARCSTATE
#define RADIOLIB_CC1101_MARC_STATE_SLEEP 0x00 // 4 0 main radio control state: sleep
#define RADIOLIB_CC1101_MARC_STATE_IDLE 0x01 // 4 0 idle
#define RADIOLIB_CC1101_MARC_STATE_XOFF 0x02 // 4 0 XOFF
#define RADIOLIB_CC1101_MARC_STATE_VCOON_MC 0x03 // 4 0 VCOON_MC
#define RADIOLIB_CC1101_MARC_STATE_REGON_MC 0x04 // 4 0 REGON_MC
#define RADIOLIB_CC1101_MARC_STATE_MANCAL 0x05 // 4 0 MANCAL
#define RADIOLIB_CC1101_MARC_STATE_VCOON 0x06 // 4 0 VCOON
#define RADIOLIB_CC1101_MARC_STATE_REGON 0x07 // 4 0 REGON
#define RADIOLIB_CC1101_MARC_STATE_STARTCAL 0x08 // 4 0 STARTCAL
#define RADIOLIB_CC1101_MARC_STATE_BWBOOST 0x09 // 4 0 BWBOOST
#define RADIOLIB_CC1101_MARC_STATE_FS_LOCK 0x0A // 4 0 FS_LOCK
#define RADIOLIB_CC1101_MARC_STATE_IFADCON 0x0B // 4 0 IFADCON
#define RADIOLIB_CC1101_MARC_STATE_ENDCAL 0x0C // 4 0 ENDCAL
#define RADIOLIB_CC1101_MARC_STATE_RX 0x0D // 4 0 RX
#define RADIOLIB_CC1101_MARC_STATE_RX_END 0x0E // 4 0 RX_END
#define RADIOLIB_CC1101_MARC_STATE_RX_RST 0x0F // 4 0 RX_RST
#define RADIOLIB_CC1101_MARC_STATE_TXRX_SWITCH 0x10 // 4 0 TXRX_SWITCH
#define RADIOLIB_CC1101_MARC_STATE_RXFIFO_OVERFLOW 0x11 // 4 0 RXFIFO_OVERFLOW
#define RADIOLIB_CC1101_MARC_STATE_FSTXON 0x12 // 4 0 FSTXON
#define RADIOLIB_CC1101_MARC_STATE_TX 0x13 // 4 0 TX
#define RADIOLIB_CC1101_MARC_STATE_TX_END 0x14 // 4 0 TX_END
#define RADIOLIB_CC1101_MARC_STATE_RXTX_SWITCH 0x15 // 4 0 RXTX_SWITCH
#define RADIOLIB_CC1101_MARC_STATE_TXFIFO_UNDERFLOW 0x16 // 4 0 TXFIFO_UNDERFLOW
// RADIOLIB_CC1101_REG_WORTIME1 + REG_WORTIME0
#define RADIOLIB_CC1101_WORTIME_MSB 0x00 // 7 0 WOR timer value
#define RADIOLIB_CC1101_WORTIME_LSB 0x00 // 7 0
// RADIOLIB_CC1101_REG_PKTSTATUS
#define RADIOLIB_CC1101_CRC_OK 0b10000000 // 7 7 CRC check passed
#define RADIOLIB_CC1101_CRC_ERROR 0b00000000 // 7 7 CRC check failed
#define RADIOLIB_CC1101_CS 0b01000000 // 6 6 carrier sense
#define RADIOLIB_CC1101_PQT_REACHED 0b00100000 // 5 5 preamble quality reached
#define RADIOLIB_CC1101_CCA 0b00010000 // 4 4 channel clear
#define RADIOLIB_CC1101_SFD 0b00001000 // 3 3 start of frame delimiter - sync word received
#define RADIOLIB_CC1101_GDO2_ACTIVE 0b00000100 // 2 2 GDO2 is active/asserted
#define RADIOLIB_CC1101_GDO0_ACTIVE 0b00000001 // 0 0 GDO0 is active/asserted
// RadioLib defaults
#define RADIOLIB_CC1101_DEFAULT_FREQ 434.0
#define RADIOLIB_CC1101_DEFAULT_BR 4.8
#define RADIOLIB_CC1101_DEFAULT_FREQDEV 5.0
#define RADIOLIB_CC1101_DEFAULT_RXBW 58.0
#define RADIOLIB_CC1101_DEFAULT_POWER 10
#define RADIOLIB_CC1101_DEFAULT_PREAMBLELEN 16
#define RADIOLIB_CC1101_DEFAULT_SW {0x12, 0xAD}
#define RADIOLIB_CC1101_DEFAULT_SW_LEN 2
/*!
\class CC1101
\brief Control class for %CC1101 module.
*/
class CC1101: public PhysicalLayer {
public:
// introduce PhysicalLayer overloads
using PhysicalLayer::transmit;
using PhysicalLayer::receive;
using PhysicalLayer::startTransmit;
using PhysicalLayer::readData;
/*!
\brief Default constructor.
\param module Instance of Module that will be used to communicate with the radio.
*/
// cppcheck-suppress noExplicitConstructor
CC1101(Module* module);
// basic methods
/*!
\brief Initialization method.
\param freq Carrier frequency in MHz. Defaults to 434 MHz.
\param br Bit rate to be used in kbps. Defaults to 4.8 kbps.
\param freqDev Frequency deviation from carrier frequency in kHz Defaults to 5.0 kHz.
\param rxBw Receiver bandwidth in kHz. Defaults to 135.0 kHz.
\param pwr Output power in dBm. Defaults to 10 dBm.
\param preambleLength Preamble Length in bits. Defaults to 16 bits.
\returns \ref status_codes
*/
int16_t begin(
float freq = RADIOLIB_CC1101_DEFAULT_FREQ,
float br = RADIOLIB_CC1101_DEFAULT_BR,
float freqDev = RADIOLIB_CC1101_DEFAULT_FREQDEV,
float rxBw = RADIOLIB_CC1101_DEFAULT_RXBW,
int8_t pwr = RADIOLIB_CC1101_DEFAULT_POWER,
uint8_t preambleLength = RADIOLIB_CC1101_DEFAULT_PREAMBLELEN);
/*!
\brief Reset method - resets the chip using manual reset sequence (without RESET pin).
*/
void reset();
/*!
\brief Blocking binary transmit method.
Overloads for string-based transmissions are implemented in PhysicalLayer.
\param data Binary data to be sent.
\param len Number of bytes to send.
\param addr Address to send the data to. Will only be added if address filtering was enabled.
\returns \ref status_codes
*/
int16_t transmit(uint8_t* data, size_t len, uint8_t addr = 0) override;
/*!
\brief Blocking binary receive method.
Overloads for string-based transmissions are implemented in PhysicalLayer.
\param data Binary data to be sent.
\param len Number of bytes to send.
\returns \ref status_codes
*/
int16_t receive(uint8_t* data, size_t len) override;
/*!
\brief Sets the module to standby mode.
\returns \ref status_codes
*/
int16_t standby() override;
/*!
\brief Sets the module to standby.
\param mode Standby mode to be used. No effect, implemented only for PhysicalLayer compatibility.
\returns \ref status_codes
*/
int16_t standby(uint8_t mode) override;
/*!
\brief Starts synchronous direct mode transmission.
\param frf Raw RF frequency value. Defaults to 0, required for quick frequency shifts in RTTY.
\returns \ref status_codes
*/
int16_t transmitDirect(uint32_t frf = 0) override;
/*!
\brief Starts synchronous direct mode reception.
\returns \ref status_codes
*/
int16_t receiveDirect() override;
/*!
\brief Starts asynchronous direct mode transmission.
\param frf Raw RF frequency value. Defaults to 0, required for quick frequency shifts in RTTY.
\returns \ref status_codes
*/
int16_t transmitDirectAsync(uint32_t frf = 0);
/*!
\brief Starts asynchronous direct mode reception.
\returns \ref status_codes
*/
int16_t receiveDirectAsync();
/*!
\brief Stops direct mode. It is required to call this method to switch from direct transmissions
to packet-based transmissions.
*/
int16_t packetMode();
// interrupt methods
/*!
\brief Sets interrupt service routine to call when GDO0 activates.
\param func ISR to call.
\param dir Signal change direction.
*/
void setGdo0Action(void (*func)(void), uint32_t dir);
/*!
\brief Clears interrupt service routine to call when GDO0 activates.
*/
void clearGdo0Action();
/*!
\brief Sets interrupt service routine to call when GDO2 activates.
\param func ISR to call.
\param dir Signal change direction.
*/
void setGdo2Action(void (*func)(void), uint32_t dir);
/*!
\brief Clears interrupt service routine to call when GDO0 activates.
*/
void clearGdo2Action();
/*!
\brief Sets interrupt service routine to call when a packet is received.
\param func ISR to call.
*/
void setPacketReceivedAction(void (*func)(void)) override;
/*!
\brief Clears interrupt service routine to call when a packet is received.
*/
void clearPacketReceivedAction() override;
/*!
\brief Sets interrupt service routine to call when a packet is sent.
\param func ISR to call.
*/
void setPacketSentAction(void (*func)(void)) override;
/*!
\brief Clears interrupt service routine to call when a packet is sent.
*/
void clearPacketSentAction() override;
/*!
\brief Interrupt-driven binary transmit method.
Overloads for string-based transmissions are implemented in PhysicalLayer.
\param data Binary data to be sent.
\param len Number of bytes to send.
\param addr Address to send the data to. Will only be added if address filtering was enabled.
\returns \ref status_codes
*/
int16_t startTransmit(uint8_t* data, size_t len, uint8_t addr = 0) override;
/*!
\brief Clean up after transmission is done.
\returns \ref status_codes
*/
int16_t finishTransmit() override;
/*!
\brief Interrupt-driven receive method. GDO0 will be activated when full packet is received.
\returns \ref status_codes
*/
int16_t startReceive() override;
/*!
\brief Interrupt-driven receive method, implemented for compatibility with PhysicalLayer.
\param timeout Ignored.
\param irqFlags Ignored.
\param irqMask Ignored.
\param len Ignored.
\returns \ref status_codes
*/
int16_t startReceive(uint32_t timeout, uint16_t irqFlags, uint16_t irqMask, size_t len) override;
/*!
\brief Reads data received after calling startReceive method. When the packet length is not known in advance,
getPacketLength method must be called BEFORE calling readData!
\param data Pointer to array to save the received binary data.
\param len Number of bytes that will be read. When set to 0, the packet length will be retreived automatically.
When more bytes than received are requested, only the number of bytes requested will be returned.
\returns \ref status_codes
*/
int16_t readData(uint8_t* data, size_t len) override;
// configuration methods
/*!
\brief Sets carrier frequency. Allowed values are in bands 300.0 to 348.0 MHz,
387.0 to 464.0 MHz and 779.0 to 928.0 MHz.
\param freq Carrier frequency to be set in MHz.
\returns \ref status_codes
*/
int16_t setFrequency(float freq) override;
/*!
\brief Sets bit rate. Allowed values range from 0.025 to 600.0 kbps.
\param br Bit rate to be set in kbps.
\returns \ref status_codes
*/
int16_t setBitRate(float br) override;
/*!
\brief Sets receiver bandwidth. Allowed values are 58, 68, 81, 102, 116, 135, 162,
203, 232, 270, 325, 406, 464, 541, 650 and 812 kHz.
\param rxBw Receiver bandwidth to be set in kHz.
\returns \ref status_codes
*/
int16_t setRxBandwidth(float rxBw);
/*!
\brief calculates and sets Rx bandwidth based on the freq, baud and freq uncertainty.
Reimplement of atlas0fd00m's (RfCat) CalculatePktChanBw function.
Modified for worse ppm with the CC1101, and adjusted for the supportted CC1101 bw.
\returns \ref status_codes
*/
int16_t autoSetRxBandwidth();
/*!
\brief Sets frequency deviation. Allowed values range from 1.587 to 380.8 kHz.
\param freqDev Frequency deviation to be set in kHz.
\returns \ref status_codes
*/
int16_t setFrequencyDeviation(float freqDev) override;
/*!
\brief Gets frequency deviation.
\param[out] freqDev Pointer to variable where to save the frequency deviation.
\returns \ref status_codes
*/
int16_t getFrequencyDeviation(float *freqDev);
/*!
\brief Sets output power. Allowed values are -30, -20, -15, -10, 0, 5, 7 or 10 dBm.
\param pwr Output power to be set in dBm.
\returns \ref status_codes
*/
int16_t setOutputPower(int8_t pwr) override;
/*!
\brief Check if output power is configurable.
This method is needed for compatibility with PhysicalLayer::checkOutputPower.
\param power Output power in dBm.
\param clipped Clipped output power value to what is possible within the module's range.
\returns \ref status_codes
*/
int16_t checkOutputPower(int8_t power, int8_t* clipped) override;
/*!
\brief Check if output power is configurable.
\param power Output power in dBm.
\param clipped Clipped output power value to what is possible within the module's range.
\param raw Raw internal value.
\returns \ref status_codes
*/
int16_t checkOutputPower(int8_t power, int8_t* clipped, uint8_t* raw);
/*!
\brief Sets 16-bit sync word as a two byte value.
\param syncH MSB of the sync word.
\param syncL LSB of the sync word.
\param maxErrBits Maximum allowed number of bit errors in received sync word. Defaults to 0.
\param requireCarrierSense Require carrier sense above threshold in addition to sync word.
\returns \ref status_codes
*/
int16_t setSyncWord(uint8_t syncH, uint8_t syncL, uint8_t maxErrBits = 0, bool requireCarrierSense = false);
/*!
\brief Sets 1 or 2 bytes of sync word.
\param syncWord Pointer to the array of sync word bytes.
\param len Sync word length in bytes.
\param maxErrBits Maximum allowed number of bit errors in received sync word. Defaults to 0.
\param requireCarrierSense Require carrier sense above threshold in addition to sync word.
\returns \ref status_codes
*/
int16_t setSyncWord(uint8_t* syncWord, uint8_t len, uint8_t maxErrBits = 0, bool requireCarrierSense = false);
/*!
\brief Sets preamble length.
\param preambleLength Preamble length to be set (in bits), allowed values: 16, 24, 32, 48, 64, 96, 128 and 192.
\param qualityThreshold Preamble quality threshold (PQT) to set.
\returns \ref status_codes
*/
int16_t setPreambleLength(uint8_t preambleLength, uint8_t qualityThreshold);
/*!
\brief Sets node and broadcast addresses. Calling this method will also enable address filtering.
\param nodeAddr Node address to be set.
\param numBroadcastAddrs Number of broadcast addresses to be used. Can be set to 0 (no broadcast),
1 (broadcast at 0x00) or 2 (broadcast at 0x00 and 0xFF).
\returns \ref status_codes
*/
int16_t setNodeAddress(uint8_t nodeAddr, uint8_t numBroadcastAddrs = 0);
/*!
\brief Disables address filtering. Calling this method will also erase previously set addresses.
\returns \ref status_codes
*/
int16_t disableAddressFiltering();
/*!
\brief Enables/disables OOK modulation instead of FSK.
\param enableOOK Enable (true) or disable (false) OOK.
\returns \ref status_codes
*/
int16_t setOOK(bool enableOOK);
/*!
\brief Gets RSSI (Recorded Signal Strength Indicator) of the last received packet.
In asynchronous direct mode, returns the current RSSI level.
\returns RSSI in dBm.
*/
float getRSSI() override;
/*!
\brief Gets LQI (Link Quality Indicator) of the last received packet.
\returns Last packet LQI (lower is better).
*/
uint8_t getLQI() const;
/*!
\brief Query modem for the packet length of received payload.
\param update Update received packet length. Will return cached value when set to false.
\returns Length of last received packet in bytes.
*/
size_t getPacketLength(bool update = true) override;
/*!
\brief Set modem in fixed packet length mode.
\param len Packet length.
\returns \ref status_codes
*/
int16_t fixedPacketLengthMode(uint8_t len = RADIOLIB_CC1101_MAX_PACKET_LENGTH);
/*!
\brief Set modem in variable packet length mode.
\param maxLen Maximum packet length.
\returns \ref status_codes
*/
int16_t variablePacketLengthMode(uint8_t maxLen = RADIOLIB_CC1101_MAX_PACKET_LENGTH);
/*!
\brief Enable sync word filtering and generation.
\param maxErrBits Maximum number of allowed error bits in sync word.
\param requireCarrierSense Require carrier sense above threshold in addition to sync word.
\returns \ref status_codes
*/
int16_t enableSyncWordFiltering(uint8_t maxErrBits = 0, bool requireCarrierSense = false);
/*!
\brief Disable preamble and sync word filtering and generation.
\param requireCarrierSense Require carrier sense above threshold.
\returns \ref status_codes
*/
int16_t disableSyncWordFiltering(bool requireCarrierSense = false);
/*!
\brief Enable CRC filtering and generation.
\param enable Set or unset CRC generation and filtering.
\returns \ref status_codes
*/
int16_t setCrcFiltering(bool enable = true);
/*!
\brief Set modem in "sniff" mode: no packet filtering (e.g., no preamble, sync word, address, CRC).
\param enable Set or unset promiscuous mode.
\param requireCarrierSense Set carriersense required above threshold, defaults to false.
\returns \ref status_codes
*/
int16_t setPromiscuousMode(bool enable = true, bool requireCarrierSense = false);
/*!
\brief Get whether the modem is in promiscuous mode: no packet filtering
(e.g., no preamble, sync word, address, CRC).
\returns Whether the modem is in promiscuous mode.
*/
bool getPromiscuousMode();
/*!
\brief Sets Gaussian filter bandwidth-time product that will be used for data shaping.
Allowed value is RADIOLIB_SHAPING_0_5. Set to RADIOLIB_SHAPING_NONE to disable data shaping.
\param sh Gaussian shaping bandwidth-time product that will be used for data shaping.
\returns \ref status_codes
*/
int16_t setDataShaping(uint8_t sh) override;
/*!
\brief Sets transmission encoding. Allowed values are RADIOLIB_ENCODING_NRZ, RADIOLIB_ENCODING_MANCHESTER, and RADIOLIB_ENCODING_WHITENING.
Note that encoding on CC1101 is applied to the entire stream including preamble, sync word, and CRC.
\param encoding Encoding to be used.
\returns \ref status_codes
*/
int16_t setEncoding(uint8_t encoding) override;
/*! \copydoc Module::setRfSwitchPins */
void setRfSwitchPins(uint32_t rxEn, uint32_t txEn);
/*! \copydoc Module::setRfSwitchTable */
void setRfSwitchTable(const uint32_t (&pins)[Module::RFSWITCH_MAX_PINS], const Module::RfSwitchMode_t table[]);
/*!
\brief Get one truly random byte from RSSI noise.
\returns TRNG byte.
*/
uint8_t randomByte() override;
/*!
\brief Read version SPI register. Should return CC1101_VERSION_LEGACY (0x04) or
CC1101_VERSION_CURRENT (0x14) if CC1101 is connected and working.
\returns Version register contents or \ref status_codes
*/
int16_t getChipVersion();
#if !RADIOLIB_EXCLUDE_DIRECT_RECEIVE
/*!
\brief Set interrupt service routine function to call when data bit is receveid in direct mode.
\param func Pointer to interrupt service routine.
*/
void setDirectAction(void (*func)(void)) override;
/*!
\brief Function to read and process data bit in direct reception mode.
\param pin Pin on which to read.
*/
void readBit(uint32_t pin) override;
#endif
/*!
\brief Configure DIO pin mapping to get a given signal on a DIO pin (if available).
\param pin Pin number onto which a signal is to be placed.
\param value The value that indicates which function to place on that pin. See chip datasheet for details.
\returns \ref status_codes
*/
int16_t setDIOMapping(uint32_t pin, uint32_t value) override;
#if !RADIOLIB_GODMODE && !RADIOLIB_LOW_LEVEL
protected:
#endif
Module* getMod() override;
// SPI read overrides to set bit for burst write and status registers access
int16_t SPIgetRegValue(uint8_t reg, uint8_t msb = 7, uint8_t lsb = 0);
int16_t SPIsetRegValue(uint8_t reg, uint8_t value, uint8_t msb = 7, uint8_t lsb = 0, uint8_t checkInterval = 2);
void SPIreadRegisterBurst(uint8_t reg, uint8_t numBytes, uint8_t* inBytes);
uint8_t SPIreadRegister(uint8_t reg);
void SPIwriteRegisterBurst(uint8_t reg, uint8_t* data, size_t len);
void SPIwriteRegister(uint8_t reg, uint8_t data);
void SPIsendCommand(uint8_t cmd);
#if !RADIOLIB_GODMODE
private:
#endif
Module* mod;
float frequency = RADIOLIB_CC1101_DEFAULT_FREQ;
float bitRate = RADIOLIB_CC1101_DEFAULT_BR;
uint8_t rawRSSI = 0;
uint8_t rawLQI = 0;
uint8_t modulation = RADIOLIB_CC1101_MOD_FORMAT_2_FSK;
size_t packetLength = 0;
bool packetLengthQueried = false;
uint8_t packetLengthConfig = RADIOLIB_CC1101_LENGTH_CONFIG_VARIABLE;
bool promiscuous = false;
bool crcOn = true;
bool directModeEnabled = true;
int8_t power = RADIOLIB_CC1101_DEFAULT_POWER;
int16_t config();
int16_t transmitDirect(bool sync, uint32_t frf);
int16_t receiveDirect(bool sync);
int16_t directMode(bool sync);
static void getExpMant(float target, uint16_t mantOffset, uint8_t divExp, uint8_t expMax, uint8_t& exp, uint8_t& mant);
int16_t setPacketMode(uint8_t mode, uint16_t len);
};
#endif
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik