Update README.md

README.md

@@ -31,17 +31,18 @@ RadioLib was originally created as a driver for [__RadioShield__](https://github
 * __Morse Code__ for modules: SX127x, RFM9x, SX126x, RF69, SX1231, CC1101 and nRF24L01
 
 ### Supported platforms:
-* __AVR__ - tested on Uno, Mega and Leonardo
-* __ESP8266__ - tested NodeMCU and Wemos D1
-* __ESP32__ - tested on ESP-WROOM-32
-* __STM32__ - tested on Nucleo L452RE-P
+* __AVR__ - tested with hardware on Uno, Mega and Leonardo
+* __ESP8266__ - tested with hardware on NodeMCU and Wemos D1
+* __ESP32__ - tested with hardware on ESP-WROOM-32
+* __STM32__ - tested with hardware on Nucleo L452RE-P
 * __SAMD__ - Arduino Zero, Arduino MKR boards, M0 Pro etc.
 * __SAM__ - Arduino Due
 * __nRF52__ - Adafruit Bluefruit Feather etc.
-* __Intel Curie__ - Arduino 101
-* __megaAVR__ - Arduino Uno WiFi Rev.2 etc.
+* _Intel Curie_ - Arduino 101
+* _megaAVR_ - Arduino Uno WiFi Rev.2 etc.
+* _Apollo3_ - SparkFun Artemis Redboard etc.
 
-The list above is by no means exhaustive. Most of RadioLib code is independent of the used platform, so as long as your board is running some Arduino-compatible core, RadioLib should work.
+The list above is by no means exhaustive. Most of RadioLib code is independent of the used platform, so as long as your board is running some Arduino-compatible core, RadioLib should work. Compilation of all examples is tested for all platoforms in __bold__ on each git push. Platforms in _italic_ are not tested on each push, but do compile and should be working.
 
 ### In development:
 * __SIM800C__ GSM module