kopia lustrzana https://github.com/jgromes/RadioLib
[nRF24] Chore: uncrustify formatting
jgromes
rodzic
e1c7f51d74
commit
40e4de8744
|
|
@ -313,7 +313,7 @@ int16_t nRF24::setBitRate(float br) {
|
|||
} else {
|
||||
return(RADIOLIB_ERR_INVALID_DATA_RATE);
|
||||
}
|
||||
|
||||
|
||||
if(state == RADIOLIB_ERR_NONE) {
|
||||
this->dataRate = bitRate;
|
||||
}
|
||||
|
|
@ -511,7 +511,7 @@ size_t nRF24::getPacketLength(bool update) {
|
|||
|
||||
int16_t nRF24::setCrcFiltering(bool crcOn) {
|
||||
// Auto Ack needs to be disabled in order to disable CRC.
|
||||
if (!crcOn) {
|
||||
if(!crcOn) {
|
||||
int16_t status = setAutoAck(false);
|
||||
RADIOLIB_ASSERT(status)
|
||||
}
|
||||
|
|
@ -545,7 +545,7 @@ int16_t nRF24::setAutoAck(uint8_t pipeNum, bool autoAckOn){
|
|||
return this->mod->SPIsetRegValue(RADIOLIB_NRF24_REG_EN_AA, (autoAckOn ? RADIOLIB_NRF24_AA_P5_ON : RADIOLIB_NRF24_AA_P5_OFF), 5, 5);
|
||||
break;
|
||||
default:
|
||||
return (RADIOLIB_ERR_INVALID_PIPE_NUMBER);
|
||||
return(RADIOLIB_ERR_INVALID_PIPE_NUMBER);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -52,126 +52,126 @@
|
|||
#define RADIOLIB_NRF24_REG_FEATURE 0x1D
|
||||
|
||||
// RADIOLIB_NRF24_REG_CONFIG MSB LSB DESCRIPTION
|
||||
#define RADIOLIB_NRF24_MASK_RX_DR_IRQ_OFF 0b01000000 // 6 6 RX_DR will not be reflected on IRQ pin
|
||||
#define RADIOLIB_NRF24_MASK_RX_DR_IRQ_ON 0b00000000 // 6 6 RX_DR will be reflected on IRQ pin as active low (default)
|
||||
#define RADIOLIB_NRF24_MASK_TX_DS_IRQ_OFF 0b00100000 // 5 5 TX_DS will not be reflected on IRQ pin
|
||||
#define RADIOLIB_NRF24_MASK_TX_DS_IRQ_ON 0b00000000 // 5 5 TX_DS will be reflected on IRQ pin as active low (default)
|
||||
#define RADIOLIB_NRF24_MASK_MAX_RT_IRQ_OFF 0b00010000 // 4 4 MAX_RT will not be reflected on IRQ pin
|
||||
#define RADIOLIB_NRF24_MASK_MAX_RT_IRQ_ON 0b00000000 // 4 4 MAX_RT will be reflected on IRQ pin as active low (default)
|
||||
#define RADIOLIB_NRF24_CRC_OFF 0b00000000 // 3 3 CRC calculation: disabled
|
||||
#define RADIOLIB_NRF24_CRC_ON 0b00001000 // 3 3 enabled (default)
|
||||
#define RADIOLIB_NRF24_CRC_8 0b00000000 // 2 2 CRC scheme: CRC8 (default)
|
||||
#define RADIOLIB_NRF24_CRC_16 0b00000100 // 2 2 CRC16
|
||||
#define RADIOLIB_NRF24_POWER_UP 0b00000010 // 1 1 power up
|
||||
#define RADIOLIB_NRF24_POWER_DOWN 0b00000000 // 1 1 power down
|
||||
#define RADIOLIB_NRF24_PTX 0b00000000 // 0 0 enable primary Tx
|
||||
#define RADIOLIB_NRF24_PRX 0b00000001 // 0 0 enable primary Rx
|
||||
#define RADIOLIB_NRF24_MASK_RX_DR_IRQ_OFF 0b01000000 // 6 6 RX_DR will not be reflected on IRQ pin
|
||||
#define RADIOLIB_NRF24_MASK_RX_DR_IRQ_ON 0b00000000 // 6 6 RX_DR will be reflected on IRQ pin as active low (default)
|
||||
#define RADIOLIB_NRF24_MASK_TX_DS_IRQ_OFF 0b00100000 // 5 5 TX_DS will not be reflected on IRQ pin
|
||||
#define RADIOLIB_NRF24_MASK_TX_DS_IRQ_ON 0b00000000 // 5 5 TX_DS will be reflected on IRQ pin as active low (default)
|
||||
#define RADIOLIB_NRF24_MASK_MAX_RT_IRQ_OFF 0b00010000 // 4 4 MAX_RT will not be reflected on IRQ pin
|
||||
#define RADIOLIB_NRF24_MASK_MAX_RT_IRQ_ON 0b00000000 // 4 4 MAX_RT will be reflected on IRQ pin as active low (default)
|
||||
#define RADIOLIB_NRF24_CRC_OFF 0b00000000 // 3 3 CRC calculation: disabled
|
||||
#define RADIOLIB_NRF24_CRC_ON 0b00001000 // 3 3 enabled (default)
|
||||
#define RADIOLIB_NRF24_CRC_8 0b00000000 // 2 2 CRC scheme: CRC8 (default)
|
||||
#define RADIOLIB_NRF24_CRC_16 0b00000100 // 2 2 CRC16
|
||||
#define RADIOLIB_NRF24_POWER_UP 0b00000010 // 1 1 power up
|
||||
#define RADIOLIB_NRF24_POWER_DOWN 0b00000000 // 1 1 power down
|
||||
#define RADIOLIB_NRF24_PTX 0b00000000 // 0 0 enable primary Tx
|
||||
#define RADIOLIB_NRF24_PRX 0b00000001 // 0 0 enable primary Rx
|
||||
|
||||
// RADIOLIB_NRF24_REG_EN_AA
|
||||
#define RADIOLIB_NRF24_AA_ALL_OFF 0b00000000 // 5 0 auto-ACK on all pipes: disabled
|
||||
#define RADIOLIB_NRF24_AA_ALL_ON 0b00111111 // 5 0 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P5_OFF 0b00000000 // 5 5 auto-ACK on pipe 5: disabled
|
||||
#define RADIOLIB_NRF24_AA_P5_ON 0b00100000 // 5 5 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P4_OFF 0b00000000 // 4 4 auto-ACK on pipe 4: disabled
|
||||
#define RADIOLIB_NRF24_AA_P4_ON 0b00010000 // 4 4 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P3_OFF 0b00000000 // 3 3 auto-ACK on pipe 3: disabled
|
||||
#define RADIOLIB_NRF24_AA_P3_ON 0b00001000 // 3 3 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P2_OFF 0b00000000 // 2 2 auto-ACK on pipe 2: disabled
|
||||
#define RADIOLIB_NRF24_AA_P2_ON 0b00000100 // 2 2 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P1_OFF 0b00000000 // 1 1 auto-ACK on pipe 1: disabled
|
||||
#define RADIOLIB_NRF24_AA_P1_ON 0b00000010 // 1 1 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P0_OFF 0b00000000 // 0 0 auto-ACK on pipe 0: disabled
|
||||
#define RADIOLIB_NRF24_AA_P0_ON 0b00000001 // 0 0 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_ALL_OFF 0b00000000 // 5 0 auto-ACK on all pipes: disabled
|
||||
#define RADIOLIB_NRF24_AA_ALL_ON 0b00111111 // 5 0 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P5_OFF 0b00000000 // 5 5 auto-ACK on pipe 5: disabled
|
||||
#define RADIOLIB_NRF24_AA_P5_ON 0b00100000 // 5 5 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P4_OFF 0b00000000 // 4 4 auto-ACK on pipe 4: disabled
|
||||
#define RADIOLIB_NRF24_AA_P4_ON 0b00010000 // 4 4 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P3_OFF 0b00000000 // 3 3 auto-ACK on pipe 3: disabled
|
||||
#define RADIOLIB_NRF24_AA_P3_ON 0b00001000 // 3 3 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P2_OFF 0b00000000 // 2 2 auto-ACK on pipe 2: disabled
|
||||
#define RADIOLIB_NRF24_AA_P2_ON 0b00000100 // 2 2 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P1_OFF 0b00000000 // 1 1 auto-ACK on pipe 1: disabled
|
||||
#define RADIOLIB_NRF24_AA_P1_ON 0b00000010 // 1 1 enabled (default)
|
||||
#define RADIOLIB_NRF24_AA_P0_OFF 0b00000000 // 0 0 auto-ACK on pipe 0: disabled
|
||||
#define RADIOLIB_NRF24_AA_P0_ON 0b00000001 // 0 0 enabled (default)
|
||||
|
||||
// RADIOLIB_NRF24_REG_EN_RXADDR
|
||||
#define RADIOLIB_NRF24_P5_OFF 0b00000000 // 5 5 receive pipe 5: disabled (default)
|
||||
#define RADIOLIB_NRF24_P5_ON 0b00100000 // 5 5 enabled
|
||||
#define RADIOLIB_NRF24_P4_OFF 0b00000000 // 4 4 receive pipe 4: disabled (default)
|
||||
#define RADIOLIB_NRF24_P4_ON 0b00010000 // 4 4 enabled
|
||||
#define RADIOLIB_NRF24_P3_OFF 0b00000000 // 3 3 receive pipe 3: disabled (default)
|
||||
#define RADIOLIB_NRF24_P3_ON 0b00001000 // 3 3 enabled
|
||||
#define RADIOLIB_NRF24_P2_OFF 0b00000000 // 2 2 receive pipe 2: disabled (default)
|
||||
#define RADIOLIB_NRF24_P2_ON 0b00000100 // 2 2 enabled
|
||||
#define RADIOLIB_NRF24_P1_OFF 0b00000000 // 1 1 receive pipe 1: disabled
|
||||
#define RADIOLIB_NRF24_P1_ON 0b00000010 // 1 1 enabled (default)
|
||||
#define RADIOLIB_NRF24_P0_OFF 0b00000000 // 0 0 receive pipe 0: disabled
|
||||
#define RADIOLIB_NRF24_P0_ON 0b00000001 // 0 0 enabled (default)
|
||||
#define RADIOLIB_NRF24_P5_OFF 0b00000000 // 5 5 receive pipe 5: disabled (default)
|
||||
#define RADIOLIB_NRF24_P5_ON 0b00100000 // 5 5 enabled
|
||||
#define RADIOLIB_NRF24_P4_OFF 0b00000000 // 4 4 receive pipe 4: disabled (default)
|
||||
#define RADIOLIB_NRF24_P4_ON 0b00010000 // 4 4 enabled
|
||||
#define RADIOLIB_NRF24_P3_OFF 0b00000000 // 3 3 receive pipe 3: disabled (default)
|
||||
#define RADIOLIB_NRF24_P3_ON 0b00001000 // 3 3 enabled
|
||||
#define RADIOLIB_NRF24_P2_OFF 0b00000000 // 2 2 receive pipe 2: disabled (default)
|
||||
#define RADIOLIB_NRF24_P2_ON 0b00000100 // 2 2 enabled
|
||||
#define RADIOLIB_NRF24_P1_OFF 0b00000000 // 1 1 receive pipe 1: disabled
|
||||
#define RADIOLIB_NRF24_P1_ON 0b00000010 // 1 1 enabled (default)
|
||||
#define RADIOLIB_NRF24_P0_OFF 0b00000000 // 0 0 receive pipe 0: disabled
|
||||
#define RADIOLIB_NRF24_P0_ON 0b00000001 // 0 0 enabled (default)
|
||||
|
||||
// RADIOLIB_NRF24_REG_SETUP_AW
|
||||
#define RADIOLIB_NRF24_ADDRESS_2_BYTES 0b00000000 // 1 0 address width: 2 bytes
|
||||
#define RADIOLIB_NRF24_ADDRESS_3_BYTES 0b00000001 // 1 0 3 bytes
|
||||
#define RADIOLIB_NRF24_ADDRESS_4_BYTES 0b00000010 // 1 0 4 bytes
|
||||
#define RADIOLIB_NRF24_ADDRESS_5_BYTES 0b00000011 // 1 0 5 bytes (default)
|
||||
#define RADIOLIB_NRF24_ADDRESS_2_BYTES 0b00000000 // 1 0 address width: 2 bytes
|
||||
#define RADIOLIB_NRF24_ADDRESS_3_BYTES 0b00000001 // 1 0 3 bytes
|
||||
#define RADIOLIB_NRF24_ADDRESS_4_BYTES 0b00000010 // 1 0 4 bytes
|
||||
#define RADIOLIB_NRF24_ADDRESS_5_BYTES 0b00000011 // 1 0 5 bytes (default)
|
||||
|
||||
// RADIOLIB_NRF24_REG_SETUP_RETR
|
||||
#define RADIOLIB_NRF24_ARD 0b00000000 // 7 4 auto retransmit delay: t[us] = (NRF24_ARD + 1) * 250 us
|
||||
#define RADIOLIB_NRF24_ARC_OFF 0b00000000 // 3 0 auto retransmit count: auto retransmit disabled
|
||||
#define RADIOLIB_NRF24_ARC 0b00000011 // 3 0 up to 3 retransmits on AA fail (default)
|
||||
#define RADIOLIB_NRF24_ARD 0b00000000 // 7 4 auto retransmit delay: t[us] = (NRF24_ARD + 1) * 250 us
|
||||
#define RADIOLIB_NRF24_ARC_OFF 0b00000000 // 3 0 auto retransmit count: auto retransmit disabled
|
||||
#define RADIOLIB_NRF24_ARC 0b00000011 // 3 0 up to 3 retransmits on AA fail (default)
|
||||
|
||||
// RADIOLIB_NRF24_REG_RF_CH
|
||||
#define RADIOLIB_NRF24_RF_CH 0b00000010 // 6 0 RF channel: f_CH[MHz] = 2400 MHz + NRF24_RF_CH
|
||||
#define RADIOLIB_NRF24_RF_CH 0b00000010 // 6 0 RF channel: f_CH[MHz] = 2400 MHz + NRF24_RF_CH
|
||||
|
||||
// RADIOLIB_NRF24_REG_RF_SETUP
|
||||
#define RADIOLIB_NRF24_CONT_WAVE_OFF 0b00000000 // 7 7 continuous carrier transmit: disabled (default)
|
||||
#define RADIOLIB_NRF24_CONT_WAVE_ON 0b10000000 // 7 7 enabled
|
||||
#define RADIOLIB_NRF24_DR_250_KBPS 0b00100000 // 5 5 data rate: 250 kbps
|
||||
#define RADIOLIB_NRF24_DR_1_MBPS 0b00000000 // 3 3 1 Mbps (default)
|
||||
#define RADIOLIB_NRF24_DR_2_MBPS 0b00001000 // 3 3 2 Mbps
|
||||
#define RADIOLIB_NRF24_PLL_LOCK_ON 0b00010000 // 4 4 force PLL lock: enabled
|
||||
#define RADIOLIB_NRF24_PLL_LOCK_OFF 0b00000000 // 4 4 disabled (default)
|
||||
#define RADIOLIB_NRF24_RF_PWR_18_DBM 0b00000000 // 2 1 output power: -18 dBm
|
||||
#define RADIOLIB_NRF24_RF_PWR_12_DBM 0b00000010 // 2 1 -12 dBm
|
||||
#define RADIOLIB_NRF24_RF_PWR_6_DBM 0b00000100 // 2 1 -6 dBm
|
||||
#define RADIOLIB_NRF24_RF_PWR_0_DBM 0b00000110 // 2 1 0 dBm (default)
|
||||
#define RADIOLIB_NRF24_RF_LNA_OFF 0b00000000 // 0 0 LNA gain: Off
|
||||
#define RADIOLIB_NRF24_RF_LNA_ON 0b00000001 // 0 0 On
|
||||
#define RADIOLIB_NRF24_CONT_WAVE_OFF 0b00000000 // 7 7 continuous carrier transmit: disabled (default)
|
||||
#define RADIOLIB_NRF24_CONT_WAVE_ON 0b10000000 // 7 7 enabled
|
||||
#define RADIOLIB_NRF24_DR_250_KBPS 0b00100000 // 5 5 data rate: 250 kbps
|
||||
#define RADIOLIB_NRF24_DR_1_MBPS 0b00000000 // 3 3 1 Mbps (default)
|
||||
#define RADIOLIB_NRF24_DR_2_MBPS 0b00001000 // 3 3 2 Mbps
|
||||
#define RADIOLIB_NRF24_PLL_LOCK_ON 0b00010000 // 4 4 force PLL lock: enabled
|
||||
#define RADIOLIB_NRF24_PLL_LOCK_OFF 0b00000000 // 4 4 disabled (default)
|
||||
#define RADIOLIB_NRF24_RF_PWR_18_DBM 0b00000000 // 2 1 output power: -18 dBm
|
||||
#define RADIOLIB_NRF24_RF_PWR_12_DBM 0b00000010 // 2 1 -12 dBm
|
||||
#define RADIOLIB_NRF24_RF_PWR_6_DBM 0b00000100 // 2 1 -6 dBm
|
||||
#define RADIOLIB_NRF24_RF_PWR_0_DBM 0b00000110 // 2 1 0 dBm (default)
|
||||
#define RADIOLIB_NRF24_RF_LNA_OFF 0b00000000 // 0 0 LNA gain: Off
|
||||
#define RADIOLIB_NRF24_RF_LNA_ON 0b00000001 // 0 0 On
|
||||
|
||||
// RADIOLIB_NRF24_REG_STATUS
|
||||
#define RADIOLIB_NRF24_RX_DR 0b01000000 // 6 6 Rx data ready
|
||||
#define RADIOLIB_NRF24_TX_DS 0b00100000 // 5 5 Tx data sent
|
||||
#define RADIOLIB_NRF24_MAX_RT 0b00010000 // 4 4 maximum number of retransmits reached (must be cleared to continue)
|
||||
#define RADIOLIB_NRF24_RX_FIFO_EMPTY 0b00001110 // 3 1 Rx FIFO is empty
|
||||
#define RADIOLIB_NRF24_RX_P_NO 0b00000000 // 3 1 number of data pipe that received data
|
||||
#define RADIOLIB_NRF24_TX_FIFO_FULL 0b00000001 // 0 0 Tx FIFO is full
|
||||
#define RADIOLIB_NRF24_RX_DR 0b01000000 // 6 6 Rx data ready
|
||||
#define RADIOLIB_NRF24_TX_DS 0b00100000 // 5 5 Tx data sent
|
||||
#define RADIOLIB_NRF24_MAX_RT 0b00010000 // 4 4 maximum number of retransmits reached (must be cleared to continue)
|
||||
#define RADIOLIB_NRF24_RX_FIFO_EMPTY 0b00001110 // 3 1 Rx FIFO is empty
|
||||
#define RADIOLIB_NRF24_RX_P_NO 0b00000000 // 3 1 number of data pipe that received data
|
||||
#define RADIOLIB_NRF24_TX_FIFO_FULL 0b00000001 // 0 0 Tx FIFO is full
|
||||
|
||||
// RADIOLIB_NRF24_REG_OBSERVE_TX
|
||||
#define RADIOLIB_NRF24_PLOS_CNT 0b00000000 // 7 4 number of lost packets
|
||||
#define RADIOLIB_NRF24_ARC_CNT 0b00000000 // 3 0 number of retransmitted packets
|
||||
#define RADIOLIB_NRF24_PLOS_CNT 0b00000000 // 7 4 number of lost packets
|
||||
#define RADIOLIB_NRF24_ARC_CNT 0b00000000 // 3 0 number of retransmitted packets
|
||||
|
||||
// RADIOLIB_NRF24_REG_RPD
|
||||
#define RADIOLIB_NRF24_RP_BELOW_64_DBM 0b00000000 // 0 0 received power in the current channel: less than -64 dBm
|
||||
#define RADIOLIB_NRF24_RP_ABOVE_64_DBM 0b00000001 // 0 0 more than -64 dBm
|
||||
#define RADIOLIB_NRF24_RP_BELOW_64_DBM 0b00000000 // 0 0 received power in the current channel: less than -64 dBm
|
||||
#define RADIOLIB_NRF24_RP_ABOVE_64_DBM 0b00000001 // 0 0 more than -64 dBm
|
||||
|
||||
// RADIOLIB_NRF24_REG_FIFO_STATUS
|
||||
#define RADIOLIB_NRF24_TX_REUSE 0b01000000 // 6 6 reusing last transmitted payload
|
||||
#define RADIOLIB_NRF24_TX_FIFO_FULL_FLAG 0b00100000 // 5 5 Tx FIFO is full
|
||||
#define RADIOLIB_NRF24_TX_FIFO_EMPTY_FLAG 0b00010000 // 4 4 Tx FIFO is empty
|
||||
#define RADIOLIB_NRF24_RX_FIFO_FULL_FLAG 0b00000010 // 1 1 Rx FIFO is full
|
||||
#define RADIOLIB_NRF24_RX_FIFO_EMPTY_FLAG 0b00000001 // 0 0 Rx FIFO is empty
|
||||
#define RADIOLIB_NRF24_TX_REUSE 0b01000000 // 6 6 reusing last transmitted payload
|
||||
#define RADIOLIB_NRF24_TX_FIFO_FULL_FLAG 0b00100000 // 5 5 Tx FIFO is full
|
||||
#define RADIOLIB_NRF24_TX_FIFO_EMPTY_FLAG 0b00010000 // 4 4 Tx FIFO is empty
|
||||
#define RADIOLIB_NRF24_RX_FIFO_FULL_FLAG 0b00000010 // 1 1 Rx FIFO is full
|
||||
#define RADIOLIB_NRF24_RX_FIFO_EMPTY_FLAG 0b00000001 // 0 0 Rx FIFO is empty
|
||||
|
||||
// RADIOLIB_NRF24_REG_DYNPD
|
||||
#define RADIOLIB_NRF24_DPL_P5_OFF 0b00000000 // 5 5 dynamic payload length on pipe 5: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P5_ON 0b00100000 // 5 5 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P4_OFF 0b00000000 // 4 4 dynamic payload length on pipe 4: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P4_ON 0b00010000 // 4 4 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P3_OFF 0b00000000 // 3 3 dynamic payload length on pipe 3: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P3_ON 0b00001000 // 3 3 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P2_OFF 0b00000000 // 2 2 dynamic payload length on pipe 2: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P2_ON 0b00000100 // 2 2 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P1_OFF 0b00000000 // 1 1 dynamic payload length on pipe 1: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P1_ON 0b00000010 // 1 1 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P0_OFF 0b00000000 // 0 0 dynamic payload length on pipe 0: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P0_ON 0b00000001 // 0 0 enabled
|
||||
#define RADIOLIB_NRF24_DPL_ALL_OFF 0b00000000 // 5 0 disable all dynamic payloads
|
||||
#define RADIOLIB_NRF24_DPL_ALL_ON 0b00111111 // 5 0 enable all dynamic payloads
|
||||
#define RADIOLIB_NRF24_DPL_P5_OFF 0b00000000 // 5 5 dynamic payload length on pipe 5: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P5_ON 0b00100000 // 5 5 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P4_OFF 0b00000000 // 4 4 dynamic payload length on pipe 4: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P4_ON 0b00010000 // 4 4 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P3_OFF 0b00000000 // 3 3 dynamic payload length on pipe 3: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P3_ON 0b00001000 // 3 3 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P2_OFF 0b00000000 // 2 2 dynamic payload length on pipe 2: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P2_ON 0b00000100 // 2 2 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P1_OFF 0b00000000 // 1 1 dynamic payload length on pipe 1: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P1_ON 0b00000010 // 1 1 enabled
|
||||
#define RADIOLIB_NRF24_DPL_P0_OFF 0b00000000 // 0 0 dynamic payload length on pipe 0: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_P0_ON 0b00000001 // 0 0 enabled
|
||||
#define RADIOLIB_NRF24_DPL_ALL_OFF 0b00000000 // 5 0 disable all dynamic payloads
|
||||
#define RADIOLIB_NRF24_DPL_ALL_ON 0b00111111 // 5 0 enable all dynamic payloads
|
||||
|
||||
// RADIOLIB_NRF24_REG_FEATURE
|
||||
#define RADIOLIB_NRF24_DPL_OFF 0b00000000 // 2 2 dynamic payload length: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_ON 0b00000100 // 2 2 enabled
|
||||
#define RADIOLIB_NRF24_ACK_PAY_OFF 0b00000000 // 1 1 payload with ACK packets: disabled (default)
|
||||
#define RADIOLIB_NRF24_ACK_PAY_ON 0b00000010 // 1 1 enabled
|
||||
#define RADIOLIB_NRF24_DYN_ACK_OFF 0b00000000 // 0 0 payloads without ACK: disabled (default)
|
||||
#define RADIOLIB_NRF24_DYN_ACK_ON 0b00000001 // 0 0 enabled
|
||||
#define RADIOLIB_NRF24_DPL_OFF 0b00000000 // 2 2 dynamic payload length: disabled (default)
|
||||
#define RADIOLIB_NRF24_DPL_ON 0b00000100 // 2 2 enabled
|
||||
#define RADIOLIB_NRF24_ACK_PAY_OFF 0b00000000 // 1 1 payload with ACK packets: disabled (default)
|
||||
#define RADIOLIB_NRF24_ACK_PAY_ON 0b00000010 // 1 1 enabled
|
||||
#define RADIOLIB_NRF24_DYN_ACK_OFF 0b00000000 // 0 0 payloads without ACK: disabled (default)
|
||||
#define RADIOLIB_NRF24_DYN_ACK_ON 0b00000001 // 0 0 enabled
|
||||
|
||||
// RadioLib defaults
|
||||
#define RADIOLIB_NRF24_DEFAULT_FREQ 2400
|
||||
|
|
@ -183,7 +183,7 @@
|
|||
\class nRF24
|
||||
\brief Control class for %nRF24 module.
|
||||
*/
|
||||
class nRF24: public PhysicalLayer {
|
||||
class nRF24 : public PhysicalLayer {
|
||||
public:
|
||||
// introduce PhysicalLayer overloads
|
||||
using PhysicalLayer::transmit;
|
||||
|
|
@ -207,11 +207,11 @@ class nRF24: public PhysicalLayer {
|
|||
\param addrWidth Address width in bytes. Defaults to 5 bytes.
|
||||
\returns \ref status_codes
|
||||
*/
|
||||
int16_t begin(
|
||||
int16_t freq = RADIOLIB_NRF24_DEFAULT_FREQ,
|
||||
int16_t dr = RADIOLIB_NRF24_DEFAULT_DR,
|
||||
int8_t pwr = RADIOLIB_NRF24_DEFAULT_POWER,
|
||||
uint8_t addrWidth = RADIOLIB_NRF24_DEFAULT_ADDRWIDTH);
|
||||
int16_t begin(
|
||||
int16_t freq = RADIOLIB_NRF24_DEFAULT_FREQ,
|
||||
int16_t dr = RADIOLIB_NRF24_DEFAULT_DR,
|
||||
int8_t pwr = RADIOLIB_NRF24_DEFAULT_POWER,
|
||||
uint8_t addrWidth = RADIOLIB_NRF24_DEFAULT_ADDRWIDTH);
|
||||
|
||||
/*!
|
||||
\brief Sets the module to sleep mode.
|
||||
|
|
@ -424,11 +424,11 @@ class nRF24: public PhysicalLayer {
|
|||
*/
|
||||
int16_t setFrequencyDeviation(float freqDev) override;
|
||||
|
||||
/*!
|
||||
\brief Query modem for the packet length of received payload.
|
||||
\param update Update received packet length. Will return cached value when set to false.
|
||||
\returns Length of last received packet in bytes.
|
||||
*/
|
||||
/*!
|
||||
\brief Query modem for the packet length of received payload.
|
||||
\param update Update received packet length. Will return cached value when set to false.
|
||||
\returns Length of last received packet in bytes.
|
||||
*/
|
||||
size_t getPacketLength(bool update = true) override;
|
||||
|
||||
/*!
|
||||
|
|
@ -466,7 +466,7 @@ class nRF24: public PhysicalLayer {
|
|||
\returns \ref status_codes
|
||||
*/
|
||||
int16_t setEncoding(uint8_t encoding) override;
|
||||
|
||||
|
||||
/*!
|
||||
\brief Enable or disable the low-noise amplifier.
|
||||
Improves receive performance at the cost of increased power consumption.
|
||||
|
|
@ -475,18 +475,18 @@ class nRF24: public PhysicalLayer {
|
|||
*/
|
||||
int16_t setLNA(bool enable);
|
||||
|
||||
#if !RADIOLIB_GODMODE && !RADIOLIB_LOW_LEVEL
|
||||
#if !RADIOLIB_GODMODE && !RADIOLIB_LOW_LEVEL
|
||||
protected:
|
||||
#endif
|
||||
#endif
|
||||
Module* getMod() override;
|
||||
|
||||
void SPIreadRxPayload(uint8_t* data, uint8_t numBytes);
|
||||
void SPIwriteTxPayload(const uint8_t* data, uint8_t numBytes);
|
||||
void SPItransfer(uint8_t cmd, bool write = false, const uint8_t* dataOut = NULL, uint8_t* dataIn = NULL, uint8_t numBytes = 0);
|
||||
|
||||
#if !RADIOLIB_GODMODE
|
||||
#if !RADIOLIB_GODMODE
|
||||
private:
|
||||
#endif
|
||||
#endif
|
||||
Module* mod;
|
||||
|
||||
int16_t frequency = RADIOLIB_NRF24_DEFAULT_FREQ;
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue