Minor formatting fix

src/TypeDef.h

@@ -74,37 +74,37 @@
 /*!
   \brief Use SPI interface.
 */
-#define RADIOLIB_USE_SPI                      0x00
+#define RADIOLIB_USE_SPI                              0x00
 
 /*!
   \brief Use UART interface.
 */
-#define RADIOLIB_USE_UART                              0x01
+#define RADIOLIB_USE_UART                             0x01
 
 /*!
   \brief Use I2C interface.
 */
-#define RADIOLIB_USE_I2C                               0x02
+#define RADIOLIB_USE_I2C                              0x02
 
 /*!
   \brief Do not use any interrupts/GPIOs.
 */
-#define RADIOLIB_INT_NONE                              0x00
+#define RADIOLIB_INT_NONE                             0x00
 
 /*!
   \brief Use interrupt/GPIO 0.
 */
-#define RADIOLIB_INT_0                                 0x01
+#define RADIOLIB_INT_0                                0x01
 
 /*!
   \brief Use interrupt/GPIO 1.
 */
-#define RADIOLIB_INT_1                                 0x02
+#define RADIOLIB_INT_1                                0x02
 
 /*!
   \brief Use both interrupts/GPIOs.
 */
-#define RADIOLIB_INT_BOTH                              0x03
+#define RADIOLIB_INT_BOTH                             0x03
 
 /*!
   \}
@@ -119,52 +119,52 @@
 /*!
   \brief Use 1 bit stop.
 */
-#define RADIOLIB_UART_STOPBIT_1               0x01
+#define RADIOLIB_UART_STOPBIT_1                       0x01
 
 /*!
   \brief Use 1.5 bit stop.
 */
-#define RADIOLIB_UART_STOPBIT_1_5             0x02
+#define RADIOLIB_UART_STOPBIT_1_5                     0x02
 
 /*!
   \brief Use 2 bit stop.
 */
-#define RADIOLIB_UART_STOPBIT_2               0x03
+#define RADIOLIB_UART_STOPBIT_2                       0x03
 
 /*!
   \brief No parity.
 */
-#define RADIOLIB_UART_PARITY_NONE             0x00
+#define RADIOLIB_UART_PARITY_NONE                     0x00
 
 /*!
   \brief Odd parity.
 */
-#define RADIOLIB_UART_PARITY_ODD              0x01
+#define RADIOLIB_UART_PARITY_ODD                      0x01
 
 /*!
   \brief Even parity.
 */
-#define RADIOLIB_UART_PARITY_EVEN             0x02
+#define RADIOLIB_UART_PARITY_EVEN                     0x02
 
 /*!
   \brief No flow control.
 */
-#define RADIOLIB_UART_FLOW_NONE               0x00
+#define RADIOLIB_UART_FLOW_NONE                       0x00
 
 /*!
   \brief RTS only.
 */
-#define RADIOLIB_UART_FLOW_RTS                0x01
+#define RADIOLIB_UART_FLOW_RTS                        0x01
 
 /*!
   \brief CTS only.
 */
-#define RADIOLIB_UART_FLOW_CTS                0x02
+#define RADIOLIB_UART_FLOW_CTS                        0x02
 
 /*!
   \brief Both RTS and CTS.
 */
-#define RADIOLIB_UART_FLOW_BOTH               0x03
+#define RADIOLIB_UART_FLOW_BOTH                       0x03
 
 /*!
   \}
@@ -181,13 +181,13 @@
 /*!
   \brief No error, method executed successfully.
 */
-#define ERR_NONE                               0
+#define ERR_NONE                                      0
 
 /*!
   \brief There was an unexpected, unknown error. If you see this, something went incredibly wrong.
   Your Arduino may be possessed, contact your local exorcist to resolve this error.
 */
-#define ERR_UNKNOWN                           -1
+#define ERR_UNKNOWN                                   -1
 
 // SX127x/RFM9x status codes
 
@@ -195,334 +195,334 @@
   \brief Radio chip was not found during initialization. This can be caused by specifying wrong chip type in the constructor
   (i.e. calling SX1272 constructor for SX1278 chip) or by a fault in your wiring (incorrect slave select pin).
 */
-#define ERR_CHIP_NOT_FOUND                    -2
+#define ERR_CHIP_NOT_FOUND                            -2
 
 /*!
   \brief Failed to allocate memory for temporary buffer. This can be cause by not enough RAM or by passing invalid pointer.
 */
-#define ERR_MEMORY_ALLOCATION_FAILED          -3
+#define ERR_MEMORY_ALLOCATION_FAILED                  -3
 
 /*!
   \brief Packet supplied to transmission method was longer than limit.
 */
-#define ERR_PACKET_TOO_LONG                   -4
+#define ERR_PACKET_TOO_LONG                           -4
 
 /*!
   \brief Timed out waiting for transmission finish.
 */
-#define ERR_TX_TIMEOUT                        -5
+#define ERR_TX_TIMEOUT                                -5
 
 /*!
   \brief Timed out waiting for incoming transmission.
 */
-#define ERR_RX_TIMEOUT                        -6
+#define ERR_RX_TIMEOUT                                -6
 
 /*!
   \brief The calculated and expected CRCs of received packet do not match.
   This means that the packet was damaged during transmission and should be sent again.
 */
-#define ERR_CRC_MISMATCH                      -7
+#define ERR_CRC_MISMATCH                              -7
 
 /*!
   \brief The supplied bandwidth value is invalid for this module.
 */
-#define ERR_INVALID_BANDWIDTH                 -8
+#define ERR_INVALID_BANDWIDTH                         -8
 
 /*!
   \brief The supplied spreading factor value is invalid for this module.
 */
-#define ERR_INVALID_SPREADING_FACTOR          -9
+#define ERR_INVALID_SPREADING_FACTOR                  -9
 
 /*!
   \brief The supplied coding rate value is invalid for this module.
 */
-#define ERR_INVALID_CODING_RATE               -10
+#define ERR_INVALID_CODING_RATE                       -10
 
 /*!
   \brief Internal only.
 */
-#define ERR_INVALID_BIT_RANGE                 -11
+#define ERR_INVALID_BIT_RANGE                         -11
 
 /*!
   \brief The supplied frequency value is invalid for this module.
 */
-#define ERR_INVALID_FREQUENCY                 -12
+#define ERR_INVALID_FREQUENCY                         -12
 
 /*!
   \brief The supplied output power value is invalid for this module.
 */
-#define ERR_INVALID_OUTPUT_POWER              -13
+#define ERR_INVALID_OUTPUT_POWER                      -13
 
 /*!
   \brief LoRa preamble was detected during channel activity detection.
   This means that there is some LoRa device currently transmitting in your channel.
 */
-#define PREAMBLE_DETECTED                     -14
+#define PREAMBLE_DETECTED                             -14
 
 /*!
   \brief No LoRa preambles were detected during channel activity detection. Your channel is free.
 */
-#define CHANNEL_FREE                          -15
+#define CHANNEL_FREE                                  -15
 
 /*!
   \brief Real value in SPI register does not match the expected one. This can be caused by faulty SPI wiring.
 */
-#define ERR_SPI_WRITE_FAILED                  -16
+#define ERR_SPI_WRITE_FAILED                          -16
 
 /*!
   \brief The supplied current limit value is invalid.
 */
-#define ERR_INVALID_CURRENT_LIMIT             -17
+#define ERR_INVALID_CURRENT_LIMIT                     -17
 
 /*!
   \brief The supplied preamble length is invalid.
 */
-#define ERR_INVALID_PREAMBLE_LENGTH           -18
+#define ERR_INVALID_PREAMBLE_LENGTH                   -18
 
 /*!
   \brief The supplied gain value is invalid.
 */
-#define ERR_INVALID_GAIN                      -19
+#define ERR_INVALID_GAIN                              -19
 
 /*!
   \brief User tried to execute modem-exclusive method on a wrong modem.
   For example, this can happen when you try to change LoRa configuration when FSK modem is active.
 */
-#define ERR_WRONG_MODEM                       -20
+#define ERR_WRONG_MODEM                               -20
 
 /*!
   \brief The supplied number of RSSI samples is invalid.
 */
-#define ERR_INVALID_NUM_SAMPLES               -21
+#define ERR_INVALID_NUM_SAMPLES                       -21
 
 /*!
   \brief The supplied RSSI offset is invalid.
 */
-#define ERR_INVALID_RSSI_OFFSET               -22
+#define ERR_INVALID_RSSI_OFFSET                       -22
 
 /*!
   \brief The supplied encoding is invalid.
 */
-#define ERR_INVALID_ENCODING                  -23
+#define ERR_INVALID_ENCODING                          -23
 
 // RF69-specific status codes
 
 /*!
   \brief The supplied bit rate value is invalid.
 */
-#define ERR_INVALID_BIT_RATE                  -101
+#define ERR_INVALID_BIT_RATE                          -101
 
 /*!
   \brief The supplied frequency deviation value is invalid.
 */
-#define ERR_INVALID_FREQUENCY_DEVIATION       -102
+#define ERR_INVALID_FREQUENCY_DEVIATION               -102
 
 /*!
   \brief The supplied bit rate to bandwidth ratio is invalid. See the module datasheet for more information.
 */
-#define ERR_INVALID_BIT_RATE_BW_RATIO         -103
+#define ERR_INVALID_BIT_RATE_BW_RATIO                 -103
 
 /*!
   \brief The supplied receiver bandwidth value is invalid.
 */
-#define ERR_INVALID_RX_BANDWIDTH              -104
+#define ERR_INVALID_RX_BANDWIDTH                      -104
 
 /*!
   \brief The supplied FSK sync word is invalid.
 */
-#define ERR_INVALID_SYNC_WORD                 -105
+#define ERR_INVALID_SYNC_WORD                         -105
 
 /*!
   \brief The supplied FSK data shaping option is invalid.
 */
-#define ERR_INVALID_DATA_SHAPING              -106
+#define ERR_INVALID_DATA_SHAPING                      -106
 
 /*!
   \brief The current modulation is invalid for the requested operation.
 */
-#define ERR_INVALID_MODULATION                -107
+#define ERR_INVALID_MODULATION                        -107
 
 // ESP8266 status codes
 
 /*!
   \brief AT command failed to execute, or timed out.
 */
-#define ERR_AT_FAILED                         -201
+#define ERR_AT_FAILED                                 -201
 
 /*!
   \brief Supplied URL is malformed or invalid.
 */
-#define ERR_URL_MALFORMED                     -202
+#define ERR_URL_MALFORMED                             -202
 
 /*!
   \brief AT command response was malformed.
 */
-#define ERR_RESPONSE_MALFORMED_AT             -203
+#define ERR_RESPONSE_MALFORMED_AT                     -203
 
 /*!
   \brief Data response was malformed.
 */
-#define ERR_RESPONSE_MALFORMED                -204
+#define ERR_RESPONSE_MALFORMED                        -204
 
 /*!
   \brief MQTT broker rejected connection due to version mismatch.
 */
-#define ERR_MQTT_CONN_VERSION_REJECTED        -205
+#define ERR_MQTT_CONN_VERSION_REJECTED                -205
 
 /*!
   \brief MQTT broker rejected connection due to unknown ID.
 */
-#define ERR_MQTT_CONN_ID_REJECTED             -206
+#define ERR_MQTT_CONN_ID_REJECTED                     -206
 
 /*!
   \brief Failed to establish connection with MQTT broker.
 */
-#define ERR_MQTT_CONN_SERVER_UNAVAILABLE      -207
+#define ERR_MQTT_CONN_SERVER_UNAVAILABLE              -207
 
 /*!
   \brief Supplied username/password combination is incorrect.
 */
-#define ERR_MQTT_CONN_BAD_USERNAME_PASSWORD   -208
+#define ERR_MQTT_CONN_BAD_USERNAME_PASSWORD           -208
 
 /*!
   \brief Unauthorized connection to MQTT broker.
 */
-#define ERR_MQTT_CONN_NOT_AUTHORIZED          -208
+#define ERR_MQTT_CONN_NOT_AUTHORIZED                  -208
 
 /*!
   \brief Received packet ID does not match the expected ID.
 */
-#define ERR_MQTT_UNEXPECTED_PACKET_ID         -209
+#define ERR_MQTT_UNEXPECTED_PACKET_ID                 -209
 
 /*!
   \brief No new packet was received since the last check.
 */
-#define ERR_MQTT_NO_NEW_PACKET_AVAILABLE      -210
+#define ERR_MQTT_NO_NEW_PACKET_AVAILABLE              -210
 
 /*!
   \brief Successfully subscribed to MQTT topic with QoS 0.
 */
-#define MQTT_SUBS_SUCCESS_QOS_0               0x00
+#define MQTT_SUBS_SUCCESS_QOS_0                       0x00
 
 /*!
   \brief Successfully subscribed to MQTT topic with QoS 1.
 */
-#define MQTT_SUBS_SUCCESS_QOS_1               0x01
+#define MQTT_SUBS_SUCCESS_QOS_1                       0x01
 
 /*!
   \brief Successfully subscribed to MQTT topic with QoS 2.
 */
-#define MQTT_SUBS_SUCCESS_QOS_2               0x02
+#define MQTT_SUBS_SUCCESS_QOS_2                       0x02
 
 /*!
   \brief Failed to subscribe to MQTT topic.
 */
-#define ERR_MQTT_SUBS_FAILED                  0x80
+#define ERR_MQTT_SUBS_FAILED                          0x80
 
 // XBee status codes
 
 /*!
   \brief Failed to enter command mode.
 */
-#define ERR_CMD_MODE_FAILED                   -301
+#define ERR_CMD_MODE_FAILED                           -301
 
 /*!
   \brief Received ZigBee frame is malformed.
 */
-#define ERR_FRAME_MALFORMED                   -302
+#define ERR_FRAME_MALFORMED                           -302
 
 /*!
   \brief Received ZigBee frame checksum does not match the calculated.
 */
-#define ERR_FRAME_INCORRECT_CHECKSUM          -303
+#define ERR_FRAME_INCORRECT_CHECKSUM                  -303
 
 /*!
   \brief Received ZigBee frame with unexpected ID.
 */
-#define ERR_FRAME_UNEXPECTED_ID               -304
+#define ERR_FRAME_UNEXPECTED_ID                       -304
 
 /*!
   \brief Timed out waiting for response to ZigBee frame.
 */
-#define ERR_FRAME_NO_RESPONSE                 -305
+#define ERR_FRAME_NO_RESPONSE                         -305
 
 // RTTY status codes
 
 /*!
   \brief Supplied RTTY frequency shift is invalid for this module.
 */
-#define ERR_INVALID_RTTY_SHIFT                -401
+#define ERR_INVALID_RTTY_SHIFT                        -401
 
 /*!
   \brief Supplied RTTY encoding is invalid.
 */
-#define ERR_UNSUPPORTED_ENCODING              -402
+#define ERR_UNSUPPORTED_ENCODING                      -402
 
 // nRF24-specific status codes
 
 /*!
   \brief Supplied data rate is invalid.
 */
-#define ERR_INVALID_DATA_RATE                 -501
+#define ERR_INVALID_DATA_RATE                         -501
 
 /*!
   \brief Supplied address width is invalid.
 */
-#define ERR_INVALID_ADDRESS_WIDTH             -502
+#define ERR_INVALID_ADDRESS_WIDTH                     -502
 
 /*!
   \brief Supplied data pipe number is invalid.
 */
-#define ERR_INVALID_PIPE_NUMBER               -503
+#define ERR_INVALID_PIPE_NUMBER                       -503
 
 /*!
   \brief ACK packet from destination module was not received within 15 retries.
 */
-#define ERR_ACK_NOT_RECEIVED                  -504
+#define ERR_ACK_NOT_RECEIVED                          -504
 
 // CC1101-specific status codes
 
 /*!
   \brief Supplied number of broadcast addresses is invalid.
 */
-#define ERR_INVALID_NUM_BROAD_ADDRS           -601
+#define ERR_INVALID_NUM_BROAD_ADDRS                   -601
 
 // SX126x-specific status codes
 
 /*!
   \brief Supplied CRC configuration is invalid.
 */
-#define ERR_INVALID_CRC_CONFIGURATION         -701
+#define ERR_INVALID_CRC_CONFIGURATION                 -701
 
 /*!
   \brief Detected LoRa transmission while scanning channel.
 */
-#define LORA_DETECTED                         -702
+#define LORA_DETECTED                                 -702
 
 /*!
   \brief Supplied TCXO reference voltage is invalid.
 */
-#define ERR_INVALID_TCXO_VOLTAGE              -703
+#define ERR_INVALID_TCXO_VOLTAGE                      -703
 
 /*!
   \brief Bit rate / bandwidth / frequency deviation ratio is invalid. See SX126x datasheet for details.
 */
-#define ERR_INVALID_MODULATION_PARAMETERS     -704
+#define ERR_INVALID_MODULATION_PARAMETERS             -704
 
 /*!
   \brief SX126x timed out while waiting for complete SPI command.
 */
-#define ERR_SPI_CMD_TIMEOUT                   -705
+#define ERR_SPI_CMD_TIMEOUT                           -705
 
 /*!
   \brief SX126x received invalid SPI command.
 */
-#define ERR_SPI_CMD_INVALID                   -706
+#define ERR_SPI_CMD_INVALID                           -706
 
 /*!
   \brief SX126x failed to execute SPI command.
 */
-#define ERR_SPI_CMD_FAILED                    -707
+#define ERR_SPI_CMD_FAILED                            -707
 
 /*!
   \brief The supplied sleep period is invalid.
@@ -530,14 +530,14 @@
   The specified sleep period is shorter than the time necessary to sleep and wake the hardware
   including TCXO delay, or longer than the maximum possible
 */
-#define ERR_INVALID_SLEEP_PERIOD              -708
+#define ERR_INVALID_SLEEP_PERIOD                      -708
 
 /*!
   \brief The supplied Rx period is invalid.
 
   The specified Rx period is shorter or longer than the hardware can handle.
 */
-#define ERR_INVALID_RX_PERIOD                 -709
+#define ERR_INVALID_RX_PERIOD                         -709
 
 /*!
   \}