2020-03-29 08:02:23 +00:00
|
|
|
#ifndef _RADIOLIB_BUILD_OPTIONS_H
|
|
|
|
|
#define _RADIOLIB_BUILD_OPTIONS_H
|
|
|
|
|
|
|
|
|
|
#if ARDUINO >= 100
|
|
|
|
|
#include "Arduino.h"
|
|
|
|
|
#else
|
|
|
|
|
#error "Unsupported Arduino version (< 1.0.0)"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Platform-specific configuration.
|
|
|
|
|
*
|
2020-08-01 14:32:24 +00:00
|
|
|
* RADIOLIB_PLATFORM - platform name, used in debugging to quickly check the correct platform is detected.
|
2020-03-29 08:02:23 +00:00
|
|
|
* RADIOLIB_PIN_TYPE - which type should be used for pin numbers in functions like digitalRead().
|
|
|
|
|
* RADIOLIB_PIN_MODE - which type should be used for pin modes in functions like pinMode().
|
|
|
|
|
* RADIOLIB_PIN_STATUS - which type should be used for pin values in functions like digitalWrite().
|
2020-04-22 12:57:51 +00:00
|
|
|
* RADIOLIB_INTERRUPT_STATUS - which type should be used for pin changes in functions like attachInterrupt().
|
2020-08-01 14:32:24 +00:00
|
|
|
* RADIOLIB_DIGITAL_PIN_TO_INTERRUPT - function/macro to be used to convert digital pin number to interrupt pin number.
|
2020-03-29 08:02:23 +00:00
|
|
|
* RADIOLIB_NC - alias for unused pin, usually the largest possible value of RADIOLIB_PIN_TYPE.
|
2020-08-01 14:32:24 +00:00
|
|
|
* RADIOLIB_DEFAULT_SPI - default SPIClass instance to use.
|
|
|
|
|
* RADIOLIB_PROGMEM - macro to place variable into program storage (usually Flash).
|
|
|
|
|
* RADIOLIB_PROGMEM_READ_BYTE - function/macro to read variables saved in program storage (usually Flash).
|
2020-03-29 08:02:23 +00:00
|
|
|
* RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED - defined if the specific platform does not support SoftwareSerial.
|
|
|
|
|
* RADIOLIB_HARDWARE_SERIAL_PORT - which hardware serial port should be used on platform that do not have SoftwareSerial support.
|
2020-04-30 15:07:28 +00:00
|
|
|
* RADIOLIB_TONE_UNSUPPORTED - some platforms do not have tone()/noTone(), which is required for AFSK.
|
2020-03-29 08:02:23 +00:00
|
|
|
*
|
|
|
|
|
* In addition, some platforms may require RadioLib to disable specific drivers (such as ESP8266).
|
2020-05-11 19:07:57 +00:00
|
|
|
*
|
2020-06-29 07:54:26 +00:00
|
|
|
* Users may also specify their own configuration by uncommenting the RADIOLIB_CUSTOM_PLATFORM,
|
|
|
|
|
* and then specifying all platform parameters in the section below. This will override automatic
|
|
|
|
|
* platform detection.
|
2020-03-29 08:02:23 +00:00
|
|
|
*/
|
2020-06-29 07:54:26 +00:00
|
|
|
|
|
|
|
|
// uncomment to enable custom platform definition
|
2020-06-29 07:55:02 +00:00
|
|
|
//#define RADIOLIB_CUSTOM_PLATFORM
|
2020-06-29 07:54:26 +00:00
|
|
|
|
2020-05-12 06:40:31 +00:00
|
|
|
#if defined(RADIOLIB_CUSTOM_PLATFORM)
|
2020-06-29 07:54:26 +00:00
|
|
|
// name for your platform
|
2020-06-30 08:53:22 +00:00
|
|
|
#define RADIOLIB_PLATFORM "Custom"
|
2020-06-29 07:54:26 +00:00
|
|
|
|
|
|
|
|
// the following parameters must always be defined
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
|
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-06-29 07:54:26 +00:00
|
|
|
|
|
|
|
|
// the following must be defined if the Arduino core does not support SoftwareSerial library
|
|
|
|
|
//#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
//#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
|
|
|
|
// the following must be defined if the Arduino core does not support tone function
|
|
|
|
|
//#define RADIOLIB_TONE_UNSUPPORTED
|
|
|
|
|
|
2021-02-21 15:36:05 +00:00
|
|
|
// some platforms seem to have issues with SPI modules that use a command interface
|
|
|
|
|
// this can be mitigated by adding delays into SPI communication
|
|
|
|
|
// (see https://github.com/jgromes/RadioLib/issues/158 for details)
|
|
|
|
|
//#define RADIOLIB_SPI_SLOWDOWN
|
|
|
|
|
|
2020-07-04 19:20:33 +00:00
|
|
|
// some of RadioLib drivers may be excluded, to prevent collisions with platforms (or to speed up build process)
|
|
|
|
|
// the following is a complete list of all possible exclusion macros, uncomment any of them to disable that driver
|
|
|
|
|
// NOTE: Some of the exclusion macros are dependent on each other. For example, it is not possible to exclude RF69
|
2020-07-04 19:26:23 +00:00
|
|
|
// while keeping SX1231 (because RF69 is the base class for SX1231). The dependency is always uni-directional,
|
2020-07-04 19:20:33 +00:00
|
|
|
// so excluding SX1231 and keeping RF69 is valid.
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_CC1101
|
2020-07-04 14:16:31 +00:00
|
|
|
//#define RADIOLIB_EXCLUDE_ESP8266
|
2020-07-04 19:20:33 +00:00
|
|
|
//#define RADIOLIB_EXCLUDE_HC05
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_JDY08
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_NRF24
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_RF69
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_SX1231 // dependent on RADIOLIB_EXCLUDE_RF69
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_SI443X
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_RFM2X // dependent on RADIOLIB_EXCLUDE_SI443X
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_SX127X
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_RFM9X // dependent on RADIOLIB_EXCLUDE_SX127X
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_SX126X
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_SX128X
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_XBEE
|
2020-07-04 19:24:43 +00:00
|
|
|
//#define RADIOLIB_EXCLUDE_AFSK
|
2020-07-04 19:20:33 +00:00
|
|
|
//#define RADIOLIB_EXCLUDE_AX25
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_HELLSCHREIBER
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_HTTP
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_MORSE
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_MQTT
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_RTTY
|
|
|
|
|
//#define RADIOLIB_EXCLUDE_SSTV
|
2020-06-30 08:53:22 +00:00
|
|
|
|
2020-05-12 06:40:31 +00:00
|
|
|
#else
|
2020-12-25 13:21:41 +00:00
|
|
|
#if defined(__AVR__) && !(defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY) || defined(ARDUINO_ARCH_MEGAAVR))
|
2020-05-11 19:07:57 +00:00
|
|
|
// Arduino AVR boards (except for megaAVR) - Uno, Mega etc.
|
|
|
|
|
#define RADIOLIB_PLATFORM "Arduino AVR"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#elif defined(ESP8266)
|
|
|
|
|
// ESP8266 boards
|
|
|
|
|
#define RADIOLIB_PLATFORM "ESP8266"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
// RadioLib has ESP8266 driver, this must be disabled to use ESP8266 as platform
|
2020-06-30 08:53:22 +00:00
|
|
|
#define RADIOLIB_EXCLUDE_ESP8266
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#elif defined(ESP32)
|
|
|
|
|
// ESP32 boards
|
|
|
|
|
#define RADIOLIB_PLATFORM "ESP32"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
2020-10-29 06:53:51 +00:00
|
|
|
|
|
|
|
|
// ESP32 doesn't support tone(), but it can be emulated via LED control peripheral
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
2020-10-29 06:53:51 +00:00
|
|
|
#define RADIOLIB_TONE_ESP32_CHANNEL (1)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#elif defined(ARDUINO_ARCH_STM32)
|
|
|
|
|
// official STM32 Arduino core (https://github.com/stm32duino/Arduino_Core_STM32)
|
|
|
|
|
#define RADIOLIB_PLATFORM "Arduino STM32 (official)"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
2021-02-12 19:21:27 +00:00
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
2021-02-05 22:25:26 +00:00
|
|
|
// slow down SX126x/8x SPI on this platform
|
|
|
|
|
#define RADIOLIB_SPI_SLOWDOWN
|
|
|
|
|
|
2021-01-02 16:44:21 +00:00
|
|
|
#elif defined(SAMD_SERIES)
|
|
|
|
|
// Adafruit SAMD boards (M0 and M4)
|
|
|
|
|
#define RADIOLIB_PLATFORM "Adafruit SAMD"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
2021-01-02 16:41:13 +00:00
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
2021-01-02 16:44:21 +00:00
|
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
2021-01-02 16:41:13 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
|
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
2021-02-05 22:25:26 +00:00
|
|
|
// slow down SX126x/8x SPI on this platform
|
|
|
|
|
#define RADIOLIB_SPI_SLOWDOWN
|
|
|
|
|
|
2021-01-02 16:44:21 +00:00
|
|
|
#elif defined(ARDUINO_ARCH_SAMD)
|
|
|
|
|
// Arduino SAMD (Zero, MKR, etc.)
|
|
|
|
|
#define RADIOLIB_PLATFORM "Arduino SAMD"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
|
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
2021-01-02 16:44:21 +00:00
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
|
|
|
|
#elif defined(__SAM3X8E__)
|
|
|
|
|
// Arduino Due
|
|
|
|
|
#define RADIOLIB_PLATFORM "Arduino Due"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
#define RADIOLIB_TONE_UNSUPPORTED
|
|
|
|
|
|
|
|
|
|
#elif (defined(NRF52832_XXAA) || defined(NRF52840_XXAA)) && !defined(ARDUINO_ARDUINO_NANO33BLE)
|
|
|
|
|
// Adafruit nRF52 boards
|
|
|
|
|
#define RADIOLIB_PLATFORM "Adafruit nRF52"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint32_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint32_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFFFFFFFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#elif defined(ARDUINO_ARC32_TOOLS)
|
|
|
|
|
// Intel Curie
|
|
|
|
|
#define RADIOLIB_PLATFORM "Intel Curie"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#elif defined(ARDUINO_AVR_UNO_WIFI_REV2) || defined(ARDUINO_AVR_NANO_EVERY)
|
|
|
|
|
// Arduino megaAVR boards - Uno Wifi Rev.2, Nano Every
|
|
|
|
|
#define RADIOLIB_PLATFORM "Arduino megaAVR"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
|
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
2021-02-05 18:58:31 +00:00
|
|
|
#elif defined(ARDUINO_ARCH_APOLLO3)
|
|
|
|
|
// Sparkfun Apollo3 boards
|
|
|
|
|
#define RADIOLIB_PLATFORM "Sparkfun Apollo3"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE Arduino_PinMode
|
|
|
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
2021-02-05 18:58:31 +00:00
|
|
|
// Apollo3 uses mbed libraries, which already contain ESP8266 driver
|
|
|
|
|
#define RADIOLIB_EXCLUDE_ESP8266
|
|
|
|
|
|
2021-02-05 22:25:26 +00:00
|
|
|
// slow down SX126x/8x SPI on this platform
|
|
|
|
|
#define RADIOLIB_SPI_SLOWDOWN
|
|
|
|
|
|
2020-05-11 19:07:57 +00:00
|
|
|
#elif defined(ARDUINO_ARDUINO_NANO33BLE)
|
|
|
|
|
// Arduino Nano 33 BLE
|
|
|
|
|
#define RADIOLIB_PLATFORM "Arduino Nano 33 BLE"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
|
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
|
|
|
|
// Nano 33 BLE uses mbed libraries, which already contain ESP8266 driver
|
2020-06-30 08:53:22 +00:00
|
|
|
#define RADIOLIB_EXCLUDE_ESP8266
|
|
|
|
|
|
|
|
|
|
#elif defined(ARDUINO_PORTENTA_H7_M7) || defined(ARDUINO_PORTENTA_H7_M4)
|
|
|
|
|
// Arduino Portenta H7
|
|
|
|
|
#define RADIOLIB_PLATFORM "Portenta H7"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE pin_size_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE PinMode
|
|
|
|
|
#define RADIOLIB_PIN_STATUS PinStatus
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
|
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-06-30 08:53:22 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
|
|
|
|
// Arduino Portenta H7 uses mbed libraries, which already contain ESP8266 driver
|
|
|
|
|
#define RADIOLIB_EXCLUDE_ESP8266
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#elif defined(__STM32F4__) || defined(__STM32F1__)
|
|
|
|
|
// Arduino STM32 core by Roger Clark (https://github.com/rogerclarkmelbourne/Arduino_STM32)
|
|
|
|
|
#define RADIOLIB_PLATFORM "STM32duino (unofficial)"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE WiringPinMode
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS ExtIntTriggerMode
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
#define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED
|
|
|
|
|
#define RADIOLIB_HARDWARE_SERIAL_PORT Serial1
|
|
|
|
|
|
2020-12-25 13:21:41 +00:00
|
|
|
#elif defined(ARDUINO_ARCH_MEGAAVR)
|
|
|
|
|
// MegaCoreX by MCUdude (https://github.com/MCUdude/MegaCoreX)
|
|
|
|
|
#define RADIOLIB_PLATFORM "MegaCoreX"
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
|
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
|
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
|
|
|
|
|
2020-05-11 19:07:57 +00:00
|
|
|
#else
|
|
|
|
|
// other platforms not covered by the above list - this may or may not work
|
|
|
|
|
#define RADIOLIB_PLATFORM "Unknown"
|
|
|
|
|
#define RADIOLIB_UNKNOWN_PLATFORM
|
|
|
|
|
#define RADIOLIB_PIN_TYPE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_MODE uint8_t
|
|
|
|
|
#define RADIOLIB_PIN_STATUS uint8_t
|
|
|
|
|
#define RADIOLIB_INTERRUPT_STATUS RADIOLIB_PIN_STATUS
|
|
|
|
|
#define RADIOLIB_DIGITAL_PIN_TO_INTERRUPT(p) digitalPinToInterrupt(p)
|
|
|
|
|
#define RADIOLIB_NC (0xFF)
|
2020-05-12 06:40:31 +00:00
|
|
|
#define RADIOLIB_DEFAULT_SPI SPI
|
2020-08-01 14:32:24 +00:00
|
|
|
#define RADIOLIB_PROGMEM PROGMEM
|
|
|
|
|
#define RADIOLIB_PROGMEM_READ_BYTE(addr) pgm_read_byte(addr)
|
2020-05-11 19:07:57 +00:00
|
|
|
|
|
|
|
|
#endif
|
2020-03-29 08:02:23 +00:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Uncomment to enable debug output.
|
|
|
|
|
* Warning: Debug output will slow down the whole system significantly.
|
|
|
|
|
* Also, it will result in larger compiled binary.
|
|
|
|
|
* Levels: debug - only main info
|
|
|
|
|
* verbose - full transcript of all SPI/UART communication
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
//#define RADIOLIB_DEBUG
|
|
|
|
|
//#define RADIOLIB_VERBOSE
|
|
|
|
|
|
|
|
|
|
// set which Serial port should be used for debug output
|
|
|
|
|
#define RADIOLIB_DEBUG_PORT Serial
|
|
|
|
|
|
2020-06-29 06:13:41 +00:00
|
|
|
#if defined(RADIOLIB_DEBUG)
|
2020-03-29 08:02:23 +00:00
|
|
|
#define RADIOLIB_DEBUG_PRINT(...) { RADIOLIB_DEBUG_PORT.print(__VA_ARGS__); }
|
|
|
|
|
#define RADIOLIB_DEBUG_PRINTLN(...) { RADIOLIB_DEBUG_PORT.println(__VA_ARGS__); }
|
|
|
|
|
#else
|
|
|
|
|
#define RADIOLIB_DEBUG_PRINT(...) {}
|
|
|
|
|
#define RADIOLIB_DEBUG_PRINTLN(...) {}
|
|
|
|
|
#endif
|
|
|
|
|
|
2020-06-29 06:13:41 +00:00
|
|
|
#if defined(RADIOLIB_VERBOSE)
|
2020-03-29 08:02:23 +00:00
|
|
|
#define RADIOLIB_VERBOSE_PRINT(...) { RADIOLIB_DEBUG_PORT.print(__VA_ARGS__); }
|
|
|
|
|
#define RADIOLIB_VERBOSE_PRINTLN(...) { RADIOLIB_DEBUG_PORT.println(__VA_ARGS__); }
|
|
|
|
|
#else
|
|
|
|
|
#define RADIOLIB_VERBOSE_PRINT(...) {}
|
|
|
|
|
#define RADIOLIB_VERBOSE_PRINTLN(...) {}
|
|
|
|
|
#endif
|
|
|
|
|
|
2021-02-12 20:05:27 +00:00
|
|
|
/*
|
|
|
|
|
* Uncomment to enable "paranoid" SPI mode
|
|
|
|
|
* Every write to an SPI register using SPI set function will be verified by a subsequent read operation.
|
|
|
|
|
* This improves reliablility, but slightly slows down communication.
|
|
|
|
|
*/
|
|
|
|
|
#define RADIOLIB_SPI_PARANOID
|
|
|
|
|
|
2020-03-29 08:02:23 +00:00
|
|
|
/*
|
|
|
|
|
* Uncomment to enable god mode - all methods and member variables in all classes will be made public, thus making them accessible from Arduino code.
|
|
|
|
|
* Warning: Come on, it's called GOD mode - obviously only use this if you know what you're doing.
|
|
|
|
|
* Failure to heed the above warning may result in bricked module.
|
|
|
|
|
*/
|
|
|
|
|
//#define RADIOLIB_GODMODE
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Uncomment to enable pre-defined modules when using RadioShield.
|
|
|
|
|
*/
|
|
|
|
|
//#define RADIOLIB_RADIOSHIELD
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Uncomment to enable static-only memory management: no dynamic allocation will be performed.
|
|
|
|
|
* Warning: Large static arrays will be created in some methods. It is not advised to send large packets in this mode.
|
|
|
|
|
*/
|
|
|
|
|
|
2020-05-14 17:53:46 +00:00
|
|
|
//#define RADIOLIB_STATIC_ONLY
|
2020-03-29 08:02:23 +00:00
|
|
|
|
|
|
|
|
// set the size of static arrays to use
|
2020-05-19 19:11:12 +00:00
|
|
|
#if !defined(RADIOLIB_STATIC_ARRAY_SIZE)
|
2020-03-29 08:02:23 +00:00
|
|
|
#define RADIOLIB_STATIC_ARRAY_SIZE 256
|
2020-05-19 19:11:12 +00:00
|
|
|
#endif
|
2020-03-29 08:02:23 +00:00
|
|
|
|
|
|
|
|
/*!
|
|
|
|
|
\brief A simple assert macro, will return on error.
|
|
|
|
|
*/
|
|
|
|
|
#define RADIOLIB_ASSERT(STATEVAR) { if((STATEVAR) != ERR_NONE) { return(STATEVAR); } }
|
|
|
|
|
|
|
|
|
|
/*!
|
|
|
|
|
\brief Macro to check variable is within constraints - this is commonly used to check parameter ranges.
|
|
|
|
|
*/
|
2020-03-30 15:38:21 +00:00
|
|
|
#define RADIOLIB_CHECK_RANGE(VAR, MIN, MAX, ERR) { if(!(((VAR) >= (MIN)) && ((VAR) <= (MAX)))) { return(ERR); } }
|
2020-03-29 08:02:23 +00:00
|
|
|
|
|
|
|
|
// version definitions
|
2020-07-06 09:57:09 +00:00
|
|
|
#define RADIOLIB_VERSION_MAJOR (0x04)
|
2021-02-07 17:00:58 +00:00
|
|
|
#define RADIOLIB_VERSION_MINOR (0x02)
|
2021-01-02 16:25:42 +00:00
|
|
|
#define RADIOLIB_VERSION_PATCH (0x00)
|
2020-03-29 08:02:23 +00:00
|
|
|
#define RADIOLIB_VERSION_EXTRA (0x00)
|
|
|
|
|
|
|
|
|
|
#define RADIOLIB_VERSION ((RADIOLIB_VERSION_MAJOR << 24) | (RADIOLIB_VERSION_MINOR << 16) | (RADIOLIB_VERSION_PATCH << 8) | (RADIOLIB_VERSION_EXTRA))
|
|
|
|
|
|
|
|
|
|
#endif
|
