Radiosonde linux decoder
 
 
 
Go to file
SammysHP 081d81f5e5 pos2nmea: Enforce line buffering
When connected to stdout, perl uses line buffering. If not connected to
stdout (e.g. from a pipe) it defaults to block buffering. This causes a
long delay and decoding issues when using the NMEA output in other
tools.

With this change always use line buffering so that NMEA messages are
flushed immediately.

Tested with NMEAoIP and GPSD:

<decoder> | pos2nmea.pl | socat - tcp-l:4444,reuseaddr,fork
<decoder> | pos2nmea.pl | gpsd -Nnrb /dev/stdin
2021-04-23 16:34:18 +02:00
c34 json: optional JSON version output, global or local define 2021-01-31 20:28:34 +01:00
demod MP3-H1 mod: (P)TU v0.3, calib coeffs complete 2021-03-20 10:06:39 +01:00
dfm DFM: geoid data, MSL = alt_ellipsoid + dMSL 2020-06-12 13:06:08 +02:00
dropsonde baud/bitrate confusion 2019-03-09 15:52:46 +01:00
ecc crc_polymod: input bugfix 2021-02-08 21:43:41 +01:00
imet imet1rs: bugfix raspi bus error 2021-02-06 09:56:28 +01:00
iq mod: --softin from test-branch 2020-06-14 14:43:47 +02:00
lms6 lmsX: short frames 2019-02-28 13:10:04 +01:00
m10 M10 Temp: R [30E]=2000k 2020-05-21 17:12:07 +02:00
meisei meisei ims100: inner gps checksum 2019-09-10 22:07:58 +02:00
mk2a json: optional JSON version output, global or local define 2021-01-31 20:28:34 +01:00
mrz MP3-H1: baud rate tweak 2021-03-11 20:40:14 +01:00
rs41 rs41: rel. hum. v0.2 2019-04-09 21:52:26 +02:00
rs92 RS92: merge SGP/NGP 2021-03-06 16:24:55 +01:00
rs_module nav_gps/rinex: buffer bugfix 2017-04-04 17:06:35 +02:00
scan scan_fft: sum of dB -> avg dB, i.e. dB(sum FFT) 2021-03-13 16:59:46 +01:00
tools pos2nmea: Enforce line buffering 2021-04-23 16:34:18 +02:00
LICENSE Create LICENSE 2019-10-28 19:42:25 +01:00
README.md imet-54 info 2021-01-31 22:51:56 +01:00

README.md

RS

Wetterballon-Radiosonden 400-406 MHz