kopia lustrzana https://github.com/dgatf/Oscilloscope
Update
rodzic
7fb759369c
commit
6752913ceb
|
@ -8,9 +8,9 @@ A simple oscilloscope application that reads the values at serial port generated
|
|||
<p align="center"><img src="./images/img2.png" width="300"><br>
|
||||
<i>Settings</i><br><br></p>
|
||||
|
||||
Flash oscilloscpe.ino to an arduino board. In the Oscilloscope gui settings select the serial port with correct properties. By default 1000000bps, 8bits, no paraty, 1 stop bot and no flow control and an interval of 100ms between analog readings.
|
||||
Flash oscilloscpe.ino to an arduino board. In the Oscilloscope gui settings select the serial port with correct properties. By default 1000000bps, 8bits, no parity, 1 stop bit and no flow control and an interval of 100ms between analog readings.
|
||||
|
||||
For ATmega based boards there is a PWM signal at pin B2(OC1B). To test the Oscilloscope app connect pin B2 to pin A0
|
||||
For ATmega boards there is a PWM signal at pin B2(OC1B). To test the Oscilloscope app connect pin B2 to pin A0
|
||||
Adjust PWM signal with PWM_FREQ and PWM_DUTY. Default is 100Hz, 50% duty.
|
||||
|
||||
Pin B2 location:
|
||||
|
|
Ładowanie…
Reference in New Issue