OpenRTX

Modular Open Source Radio Firmware

OpenRTX is a free and open source firmware for digitam ham radios, top-down designed with modularity, flexibility and performance in mind.

Currently OpenRTX is being actively developed for the TYT MD-380/390 and MD-UV380/390.

This firmware is highly experimental and is not in a usable state right now, however contributions and testing are welcome and accepted.

Installation

To build and install the firmware, first clone this repository:

git clone https://github.com/n1zzo/OpenRTX

To build the firmware you need to have a toolchain for the ARM ISA installed on you system, you can install one using your package manager.

For example on Ubuntu you can install arm-none-eabi-gcc

sudo apt install gcc-arm-none-eabi

You can then proceed in building the firmware:

cd OpenRTX
make

If everything compiled without errors you can connect your radio via USB, put it in recovery mode (by powering it on with the PTT and the button above it pressed), and flash the firmware:

make flash

Now you can power cycle your radio and enjoy the new breath of freedom!

License

This software is released under the GNU GPL v3, the modified wrapping scripts from Travis Goodspeed are licensed in exchange of two liters of India Pale Ale, we still owe you the two liters, Travis!

Credits

OpenRTX was created by:

• Niccolò Izzo IU2KIN n@izzo.sh
• Silvano Seva IU2KWO silseva@fastwebnet.it
• Federico Izzo IU2NUO federico@izzo.pro

All this was made possible by the huge reverse engineering effort of Travis Goodspeed and all the contributors of md380tools. A huge thank goes to Roger Clark, and his OpenGD77 which inspired this project.