OpenRTX/platform/targets/Module17/platform.c

208 wiersze
5.0 KiB
C

/***************************************************************************
* Copyright (C) 2021 - 2023 by Federico Amedeo Izzo IU2NUO, *
* Niccolò Izzo IU2KIN, *
* Frederik Saraci IU2NRO, *
* Silvano Seva IU2KWO *
* Mathis Schmieder DB9MAT *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 3 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, see <http://www.gnu.org/licenses/> *
***************************************************************************/
#include <interfaces/platform.h>
#include <interfaces/delays.h>
#include <interfaces/nvmem.h>
#include <interfaces/audio.h>
#include <peripherals/gpio.h>
#include <calibInfo_Mod17.h>
#include <ADC1_Mod17.h>
#include <backlight.h>
#include <hwconfig.h>
#include <MCP4551.h>
extern mod17Calib_t mod17CalData;
static hwInfo_t hwInfo =
{
.vhf_maxFreq = 0,
.vhf_minFreq = 0,
.vhf_band = 0,
.uhf_maxFreq = 0,
.uhf_minFreq = 0,
.uhf_band = 0,
.hw_version = 0,
.name = "Module17"
};
void platform_init()
{
gpio_setMode(POWER_SW, OUTPUT);
gpio_setPin(POWER_SW);
/* Configure GPIOs */
gpio_setMode(PTT_LED, OUTPUT);
gpio_setMode(SYNC_LED, OUTPUT);
gpio_setMode(ERR_LED, OUTPUT);
gpio_setMode(PTT_SW, INPUT);
gpio_setMode(PTT_OUT, OUTPUT);
gpio_clearPin(PTT_OUT);
/* Set analog output for baseband signal to an idle level of 1.1V */
gpio_setMode(BASEBAND_TX, INPUT_ANALOG);
RCC->APB1ENR |= RCC_APB1ENR_DACEN;
DAC->CR |= DAC_CR_EN1;
DAC->DHR12R1 = 1365;
nvm_init();
adc1_init();
i2c_init();
mcp4551_init(SOFTPOT_RX);
mcp4551_init(SOFTPOT_TX);
audio_init();
/* Set defaults for calibration */
mod17CalData.tx_wiper = 0x080;
mod17CalData.rx_wiper = 0x080;
mod17CalData.bb_tx_invert = 0;
mod17CalData.bb_rx_invert = 0;
mod17CalData.mic_gain = 0;
/*
* Hardware version is set using a voltage divider on PA3.
* - 0V: rev. 0.1d or lower
* - 3.3V: rev 0.1e
*/
uint16_t ver = adc1_getMeasurement(ADC_HWVER_CH);
if(ver >= 3000)
hwInfo.hw_version = 1;
/* 100ms blink of sync led to signal device startup */
gpio_setPin(SYNC_LED);
sleepFor(0, 100);
gpio_clearPin(SYNC_LED);
}
void platform_terminate()
{
/* Shut down LEDs */
gpio_clearPin(PTT_LED);
gpio_clearPin(SYNC_LED);
gpio_clearPin(ERR_LED);
adc1_terminate();
nvm_terminate();
audio_terminate();
/*
* Cut off the power switch then wait 100ms to allow the 3.3V rail to
* effectively go down to 0V. Without this delay, the board fails to power
* off because the main() function returns, triggering an OS reboot.
*/
gpio_clearPin(POWER_SW);
sleepFor(0, 100);
}
uint16_t platform_getVbat()
{
return 0;
}
uint8_t platform_getMicLevel()
{
return 0;
}
uint8_t platform_getVolumeLevel()
{
return 0;
}
int8_t platform_getChSelector()
{
return 0;
}
bool platform_getPttStatus()
{
// Return true if gpio status matches the PTT in active level
uint8_t ptt_status = gpio_readPin(PTT_SW);
if(ptt_status == mod17CalData.ptt_in_level)
return true;
return false;
}
bool platform_pwrButtonStatus()
{
return true;
}
void platform_ledOn(led_t led)
{
switch(led)
{
case RED:
gpio_setPin(PTT_LED);
break;
case GREEN:
gpio_setPin(SYNC_LED);
break;
case YELLOW:
gpio_setPin(ERR_LED);
break;
default:
break;
}
}
void platform_ledOff(led_t led)
{
switch(led)
{
case RED:
gpio_clearPin(PTT_LED);
break;
case GREEN:
gpio_clearPin(SYNC_LED);
break;
case YELLOW:
gpio_clearPin(ERR_LED);
break;
default:
break;
}
}
void platform_beepStart(uint16_t freq)
{
/* TODO */
(void) freq;
}
void platform_beepStop()
{
/* TODO */
}
const hwInfo_t *platform_getHwInfo()
{
return &hwInfo;
}