mirror
/
OpenRTX
kopia lustrzana https://github.com/OpenRTX/OpenRTX
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
1 755 Commity
17 Gałęzie
12 Tagi
74 MiB
Wykres commitów

1755 Commity (mduv3x0-plus)

Autor SHA1 Wiadomość Data
Silvano Seva 230e6310c7 Module17: added 100ms blink of sync led to indicate device startup 
See also #216.
 2023-12-24 10:48:37 +01:00
Silvano Seva 916337e3d7 Refactored meson.build 2023-12-19 21:17:20 +01:00
Silvano Seva f703a48069 ci: use linux codec2 library from apt instead of building it 2023-12-12 19:08:02 +01:00
Ryan Turner 384a07d197 ci: add a job for builds 2023-12-12 19:07:53 +01:00
Silvano Seva 3a2bac3e7e Fixed missing transmission of the 1750Hz tone when keypad is locked. 
Fix #210
 2023-12-12 19:05:52 +01:00
Silvano Seva ab4a964ddd Linux NVM: added implementation of nvm_getMemoryAreas() 2023-12-07 12:02:48 +01:00
Niccolò Izzo ca5519812f Added platform test for validation of NVM devices. 
Refactored memory dump test to be compatible with xxd format.

TG-502
 2023-12-03 19:00:55 +01:00
Silvano Seva 419d02a203 Linux NVM: updated implementation to use the new standard API 2023-12-03 19:00:55 +01:00
Silvano Seva 096da4102d Utility functions to perform read/write/erase operations on NVM areas and partitions 2023-12-03 19:00:55 +01:00
Silvano Seva 070ed3de32 Device driver for file-based nonvolatile memory storage 2023-12-03 19:00:55 +01:00
Silvano Seva 578c4f425b Added list of NVM areas to ttwrplus target 2023-12-03 19:00:55 +01:00
Silvano Seva f94e6ce49e Added list of NVM areas to Module17 2023-12-03 19:00:55 +01:00
Silvano Seva ecd3602662 Added list of NVM areas to GDx targets 2023-12-03 19:00:55 +01:00
Silvano Seva 72c8b8246b Added list of NVM areas to MDx targets 2023-12-03 19:00:52 +01:00
Silvano Seva d9b22c1d2d Added function to retrieve the list of available NVM areas 2023-12-03 18:34:39 +01:00
Silvano Seva faffbfb930 ttwrplus: updated flash memory partitions 2023-12-03 18:34:39 +01:00
Niccolò Izzo 09587ab6c8 Added wrapper to NVM device API for Zephyr flash API. 
Wrapped Zephyr flash API calls for OpenRTX interface, added
additional settings specific to T-TWR Plus.

TG-553
 2023-12-03 18:34:39 +01:00
Silvano Seva d20f0e2c8d Added implementation of the standard NVM device API to AT24Cx driver. 2023-12-03 18:34:39 +01:00
Silvano Seva ab66054341 Added implementation of the standard NVM device API to W25Qx driver. 2023-12-03 18:34:39 +01:00
Silvano Seva 7174246492 Standard interface for non volatile memory devices 2023-12-03 18:34:39 +01:00
Silvano Seva f125bbe9be Refactored AT24Cx EEPROM driver and implemented memory write function 2023-12-03 18:34:39 +01:00
Silvano Seva be07b8f73e Refactoring of W25Qx driver 2023-12-03 18:34:39 +01:00
Marco 5a0f92e23d Add a volume bar in the bottom over the other bars 
This will fix #190
 2023-11-25 19:08:38 +01:00
Silvano Seva 91c0965007 Module17: made M17 baseband output have correct DC bias and amplitude 
Removed an old workaround for an hardware bug of Module17 rev 0.1b limiting
the output swing of baseband signal in newer hardware revisions.

Contribution by Mathis Schmieder DB9MAT.
 2023-11-21 18:46:03 +01:00
Silvano Seva 7ccfbe62c8 Fixed compilation errors in M17 demodulator logger 2023-11-12 12:41:35 +01:00
Silvano Seva 75abbaa12c Linux: using file-based driver for SOURCE_RTX input device 2023-11-12 12:35:21 +01:00
Silvano Seva 8040a012b4 Driver for file-based audio input device 2023-11-12 12:34:37 +01:00
marco 65d2fdb0e3 Fix unit tests by using system provided codec2 2023-11-10 19:03:28 +01:00
Silvano Seva 6b34bf362d Linux: declared an instance of Module17 calibration data to allow linking with Module17 UI code. 
Declared the "mod17CalData" variable inside linux platform.c to make the symbol available
to the linker when building the linux emulator with the Module17 UI.
 2023-11-05 18:33:12 +01:00
Silvano Seva 12e2a0f18b Linux: added garbage collection of unused .text and .data sections at link time 2023-11-05 18:27:29 +01:00
Silvano Seva 7dc2ca5524 Driver for random number generator peripheral 2023-11-02 18:36:07 +01:00
marco 9433f8735a Mod17: get last callsign if available 2023-10-28 11:58:25 +02:00
Morgan Diepart f43281e815 Display callsign on splash screen 2023-10-26 06:01:54 +02:00
Silvano Seva 1035c2b801 Updated version number in meson.build 2023-10-23 18:30:14 +02:00
Morgan Diepart 1124c76b73 Added M17 destination to settings 
# callsign in backed-up settings
 2023-10-23 00:40:55 +02:00
Silvano Seva 44bfdec947 Added 30ms sleep in OpMode_M17::offState to prevent the rtx thread from going into an endless loop. 2023-10-22 18:59:06 +02:00
Silvano Seva e362a80d45 Fixed truncation error in AT1846S setFrequency() 
Fixed error in compuation of values for AT1846S frequency registers
causing the output frequency to have an effective resolution of 1kHz
instead of 62.5Hz.
 2023-10-22 03:24:25 +02:00
Niccolò Izzo b4c8fca767
Implemented uf2 image wrapping for T-TWR Plus 
T-TWR Plus target now produces images in UF2 format.
This format is compatible with bootloaders such as tinyuf2, and future
releases of the hardware will come pre-flashed with tinyuf2, thus
flashing them will not requires any other dependency than the uf2 file
itself.

TG-553
 2023-10-18 11:27:43 +02:00
Niccolò Izzo 95e79e871d ttwrplus: Add emergency shutdown 
Enabled 10 second long press emergency shutdown PMU function to be able
to reset the radio even when OpenRTX is freezed, without the need of
pulling out and back in the battery.

TG-553
 2023-10-17 09:54:13 +02:00
Niccolò Izzo 4697be5ea6 Fix squelch behaviour on T-TWR Plus 
On LILYGO T-TWR Plus the squelch was being controlled by AT1846s,
resulting in the squelch bar setting being completely ignored. Now we
are introducing the support for a new command of sa8x8-fw called
AT+AUDIO that controls the muting or unmuting of the speaker power
amplifier, enabling us to:
1. Disable AT1846s embedded squelch
2. Enable OpeRTX squelch
Also fixed a bug where the sa8x8-fw version was incorrectly checked.
AT+AUDIO requires sa8x8-fw version v1.3.0.r1, bumped version check in
OpenRTX.

TG-553
 2023-10-17 09:54:09 +02:00
Niccolò Izzo 744ad85799 Adapt Radio settings to UI_NO_KEYBOARD interface 
Enabled the T-TWR Plus to use split frequency settings by adapting the
Settings->Radio menu to the UI_NO_KEYBOARD user interface.

TG-553
 2023-10-16 21:50:03 +02:00
Niccolò Izzo 17d5be118e Enable frequency offset input from radio menu 
Adapted callsign input to create a frequency input menu, that was used
to enable the input of a frequency offset from the Settings->Radio menu.
 2023-10-16 21:50:03 +02:00
Niccolò Izzo 5d3c6c825d Add radio settings for frequency offset, direction, and frequency step. 
Add customizable frequency_step in radio state.
Offset is not yet selectable from Settings->Radio but only with keypad
from the VFO screen.
 2023-10-16 21:49:56 +02:00
tarxvf 7612044d91 VFO screen cleanup: removed unused options, introduced compressed frequency print and lock icon. 
Contribution by tarxvf.
 2023-10-16 21:47:01 +02:00
tarxvf 7e291fe6fd Implement UI input lockout logic, toggled by macro menu key 9. 
Contribution by tarxvf.
 2023-10-16 21:46:37 +02:00
marco 20b0c375aa Change M17_orig to link and change callsign handling 
This will swap the first extended callsign with the source callsign
if there is extended callsign data.
This allows to always store the true source in the M17_src variable

See #188
 2023-10-13 09:58:34 +02:00
Niccolò Izzo 04d6d01a5c
Reduce encoder sensitivity on T-TWR Plus 
Reduce encoder sensitivity on T-TWR Plus by dividing the pulse counter
input by two.

TG-553
 2023-10-09 09:23:45 +02:00
Niccolò Izzo e939218001
Integrate west manifest to facilitate Zephyr build 
Add west manifest contributed by edgetriggered to allow automated
cloning of the correst Zephyr revision.
Now codec2 dependency is enabled also for T-TWR build, enabling to build
it from scratch without first building a Miosix target.
Enabled non-cross build to use codec2 compiled sources.
 2023-10-09 09:23:45 +02:00
marco 6baa368984 Enable edit mode for dst callsign on mod17 
This allows editing the destination callsign on the module17
When on the main screen, the right arrow will enter edit mode.
 2023-09-29 17:05:14 +02:00
Niccolò Izzo 7c09f7d2b0
Add meson wrapper to build Zephyr targets 
Now zephyr build process can be invoked from meson by running:

- meson setup build
- meson compile -C build openrtx_ttwrplus

TG-553
 2023-09-25 14:31:15 +02:00