Wykres commitów

10 Commity (RT-890)

Autor SHA1 Wiadomość Data
Niccolò Izzo 95e79e871d ttwrplus: Add emergency shutdown
Enabled 10 second long press emergency shutdown PMU function to be able
to reset the radio even when OpenRTX is freezed, without the need of
pulling out and back in the battery.

TG-553
2023-10-17 09:54:13 +02:00
Silvano Seva 6f567cc38d ttwrplus: implemented the platform_pwrButtonStatus() function.
The platform_pwrButtonStatus() function returns false (shutdown) in
case of a long press of the power button.
2023-09-20 21:16:43 +02:00
Niccolò Izzo fe027c440c ttwrplus: enable volume control
Replaced KEY_F7 and KEY_F8 with KEY_VOLUP and KEY_VOLDOWN.
Remapped the T-TWR Plus volume up and down keys to those, fixing a bug
in the pmu key detection where the wrong active edge was selected.
Adapt soft volume code for the UV3x0 to control code in the T-TWR Plus
by acting on the AT1846s Rx gain.
For target T-TWR Plus bound long press of KEY_VOLDOWN to macro menu open.
Unbound KNOB_LEFT and KNOB_RIGHT to squelch control and bound
instead KEY_VOLUP and KEY_VOLDOWN.

TG-553
2023-09-20 21:08:35 +02:00
Niccolò Izzo ad1beffcf3 ttwrplus: implemented PMU interrupts handling
TG-553
2023-09-20 21:08:35 +02:00
Niccolò Izzo 2dabacebd8 ttwrplus: Implement power control on SA8x8
Implemented power control in T-TWR Plus by using the embedded switch
(RADIO_PWR) that controls the H/L pin of the SA868.

TG-553
2023-09-20 21:08:35 +02:00
Niccolò Izzo d935532fc4 ttwrplus: enable GPS
GPS was enabled using UART1 and Zephyr message queues.
UI is a bit crushed on the small 128x64 screen but hardware works as expected.

TG-553
2023-09-20 21:08:35 +02:00
Niccolò Izzo eeb05bcc0f ttwrplus: fix unstable baseband startup
A proper baseband reset is now issued at each startup. Now OpenRTX check
for SA868 responsiveness before proceeding with radio initialization,
eliminating unstable behaviour at boot.

TG-553
2023-09-20 21:08:35 +02:00
Niccolò Izzo 15f5477ae0 ttwrplus: add battery voltage readout
Add battery voltage readout through the XPowersLib library.

TG-553
2023-09-20 21:08:35 +02:00
Federico Amedeo Izzo e05d09f0fe ttwrplus: Set battery charging current to 500mAh to limit PMU heating and max. capacity to 80% to extend lifetime by 2.5x-3x
Reference article: https://batteryuniversity.com/article/bu-808-how-to-prolong-lithium-based-batteries
2023-09-20 21:08:35 +02:00
Niccolò Izzo 8e8daa78c8 ttwrplus: implement PMU support
Begin implementing PMU, now successfully read and write registers, need
to implement button functionality, battery voltage readout, charge
detection etc.

TG-553
2023-09-20 21:08:35 +02:00