mirror
/
OpenRTX
kopia lustrzana https://github.com/OpenRTX/OpenRTX
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność
1 578 Commity
16 Gałęzie
12 Tagi
72 MiB
Wykres commitów

27 Commity (Micro17)

Autor SHA1 Wiadomość Data
Silvano Seva d8c0ab1c44 Dropped support for 20kHz bandwidth 
Dropped support for 20kHz bandwith in rtx code and radio drivers. This option
is supported only by MDx radios and so far is not being used at all.
 2024-02-06 19:19:47 +01:00
Silvano Seva 44385b3b25 Using signed 32-bit data type for RSSI instead of floating points 
Switched to int32_t for RSSI representation to allow running the code also
on devices with limited resources. Defined a new ad-hoc type to still keep
the possibility of using floating points on more capable devices.
 2024-02-01 11:07:20 +01:00
Silvano Seva 5b3929ef44 Moved from float to uint32_t for TX power, substituted dBm with mW in CPS channel struct 
General code optimization allowing to reduce the overall binary size, especially
for devices without hardware floating point support. On the MD-380 (which has the
FPU) the .text size has been reduced of 4'928 bytes.
 2024-02-01 11:07:20 +01:00
Silvano Seva 24c4a25b2d Made "static" all the variables local to each translation unit 2024-02-01 11:07:20 +01:00
marco 77e0ad27a0 Added support for 1750Hz squelch tone, implemented squelch tone in UV-3x0 radio driver. 
When pressing the Hash key and the PTT key in FM mode
a 1750 Hz tone is transmitted
 2023-09-22 13:58:59 +02:00
Silvano Seva 4cd1fdfcf3 Moved gpio.h to peripherals 2023-07-21 19:27:14 +02:00
Silvano Seva a5b925e76f Small code cleanup in MD-UV3x0 HR_C6000 driver, temporary workaround to fix #129 2023-07-14 18:12:31 +02:00
Silvano Seva 313e9615a6 Removed platform_getCalibrationData() function because of limited usefulness. 
Given that each radio driver loads its calibration data when initializing
and that the radio driver is strongly platform-specific, there is no strong
need for an intermediate redirection layer through the platform API.
 2023-07-14 12:26:39 +02:00
Silvano Seva a89a7523cb Updated year in copyright headers 2023-02-08 16:33:02 +01:00
Silvano Seva 3c65f8834a Added to radio driver interface two functions to enable and disable AF output towards the speaker 2022-10-28 09:47:47 +02:00
Silvano Seva 1fa13d63d8 Modified radio drivers so that bandwidth parameter in radio configuration is ignored for operating modes different from analog FM. Fixes #100 2022-08-01 18:29:20 +02:00
Silvano Seva 316e588bc3 Updated copyright headers 2022-06-02 09:56:05 +02:00
Silvano Seva cbd3922325 Cleanup and reorganisation of state header file, new OpenRTX CPS data structure 2022-06-01 15:04:17 +02:00
Silvano Seva 2dc0106380 On MD-UV3x0 force silencing of HR_C6000 audio output when in M17 RX to avoid spillover of baseband signal towards the speaker. 2022-05-31 14:22:31 +02:00
Mathis Schmieder 54112d4d7b Increased input gain on MD-UV3x0 type of radios 2022-05-27 21:48:47 +02:00
Silvano Seva fda0fed5e7 Moved constant specifying sample rate for M17 baseband decoding from hwconfig.h files to M17Demodulator class 2022-05-27 21:48:47 +02:00
Niccolò Izzo d22948a096 Fix naming error 
Replaced FM with OPMODE_FM and DMR with OPMODE_DMR.
 2022-05-27 21:48:46 +02:00
Niccolò Izzo 6588a6718e Add M17 namespace in M17 related source files 
Now M17 source files reside in the M17 namespace, the OPMODE_ prefix
was added to all opmode enums to avoid a name clash.
 2022-05-27 21:48:46 +02:00
Silvano Seva b58fbd6760 Fixed syntax error in MD3x0 and UV3x0 radio drivers 2021-10-08 19:34:08 +02:00
Niccolò Izzo 65a632054a Disable CTCSS tones in M17 mode 
Removed CTCSS modulation for M17 mode, removed FM analog specific
settings in macro menu such as tone selection, tone enable and tx
bandwidth.
 2021-10-08 16:02:03 +02:00
Silvano Seva 5113a39f2a Enabled M17 support also in MD-UV3x0 radio driver 2021-09-21 12:02:32 +02:00
Silvano Seva 66552be403 Added function to radio API allowing to fine tune the radio's VCXO polarisation voltage. Currently, this functionality is effective only on MD-3x0 devices. (TG-195 #ready-for-test) 2021-06-03 14:50:47 +02:00
Silvano Seva b29b24fdc0 Implemented RX tone squelch on MD-UV3x0 and GDx (TG-43) 2021-06-02 12:44:46 +02:00
Silvano Seva 4d68f02ab4 Updated documetation for radio.h API, removed old baseband C source files. 2021-05-29 08:20:12 +02:00
Silvano Seva 87d9b733e6 Fixed wrong bitmask in AT1846S::setRxAudioGain. Moved getBandFromFrequency function to a dedicated file, in common for all dual-band radio drivers. 2021-05-29 08:20:12 +02:00
Silvano Seva 4a080d881a Finalised MD-UV3x0 radio driver, now supporting also cross-band operation (TG-186) 2021-05-29 08:20:12 +02:00
Silvano Seva f1a01d7613 New radio driver for MD-UV3x0, testing required 2021-05-29 08:20:12 +02:00