Driver for AT1846S baseband IC

replace/d2877b8d330a1869bb8fb0bf6b344c331c163291
Silvano Seva 2021-01-17 14:17:09 +01:00
rodzic 9802bc4e75
commit b2eb042d2b
2 zmienionych plików z 387 dodań i 0 usunięć

Wyświetl plik

@ -0,0 +1,266 @@
/***************************************************************************
* Copyright (C) 2020 by Federico Amedeo Izzo IU2NUO, *
* Niccolò Izzo IU2KIN *
* Frederik Saraci IU2NRO *
* Silvano Seva IU2KWO *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 3 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, see <http://www.gnu.org/licenses/> *
***************************************************************************/
#include "AT1846S.h"
#include "interfaces.h"
#include <calibInfo_GDx.h>
#include <interfaces/delays.h>
#include <stdio.h>
void _maskSetRegister(uint8_t reg, uint16_t mask, uint16_t value)
{
uint16_t regVal = i2c_readReg16(reg);
regVal = (regVal & ~mask) | (value & mask);
i2c_writeReg16(reg, regVal);
}
/*
* NOTE: after some main AT1846S parameters (frequency, bandwidth, ...) are changed,
* the chip must be "cycled" to make them effective. Cycling consists of turning
* both TX and RX off and then switch back to the desired functionality.
*
* The function _reloadConfig() provides an helper to do this.
*/
static inline void _reloadConfig()
{
uint16_t funcMode = i2c_readReg16(0x30) & 0x0060; /* Get current op. status */
_maskSetRegister(0x30, 0x0060, 0x0000); /* RX and TX off */
_maskSetRegister(0x30, 0x0060, funcMode); /* Restore op. status */
}
void AT1846S_init()
{
i2c_writeReg16(0x30, 0x0001); // Soft reset
delayMs(50);
i2c_writeReg16(0x30, 0x0004); // Init settings
i2c_writeReg16(0x04, 0x0FD0);
i2c_writeReg16(0x1F, 0x1000);
i2c_writeReg16(0x09, 0x03AC);
i2c_writeReg16(0x24, 0x0001);
i2c_writeReg16(0x31, 0x0031);
i2c_writeReg16(0x33, 0x45F5);
i2c_writeReg16(0x34, 0x2B89);
i2c_writeReg16(0x3F, 0x3263);
i2c_writeReg16(0x41, 0x470F);
i2c_writeReg16(0x42, 0x1036);
i2c_writeReg16(0x43, 0x00BB);
i2c_writeReg16(0x44, 0x06FF);
i2c_writeReg16(0x47, 0x7F2F);
i2c_writeReg16(0x4E, 0x0082);
i2c_writeReg16(0x4F, 0x2C62);
i2c_writeReg16(0x53, 0x0094);
i2c_writeReg16(0x54, 0x2A3C);
i2c_writeReg16(0x55, 0x0081);
i2c_writeReg16(0x56, 0x0B02);
i2c_writeReg16(0x57, 0x1C00);
i2c_writeReg16(0x5A, 0x4935);
i2c_writeReg16(0x58, 0xBCCD);
i2c_writeReg16(0x62, 0x3263);
i2c_writeReg16(0x4E, 0x2082);
i2c_writeReg16(0x63, 0x16AD);
i2c_writeReg16(0x30, 0x40A4);
delayMs(50);
i2c_writeReg16(0x30, 0x40A6); // cal start
delayMs(100);
i2c_writeReg16(0x30, 0x4006); // cal end
delayMs(100);
i2c_writeReg16(0x58, 0xBCED);
i2c_writeReg16(0x0A, 0x7BA0);
i2c_writeReg16(0x41, 0x4731);
i2c_writeReg16(0x44, 0x05FF);
i2c_writeReg16(0x59, 0x09D2);
i2c_writeReg16(0x44, 0x05CF);
i2c_writeReg16(0x44, 0x05CC);
i2c_writeReg16(0x48, 0x1A32);
i2c_writeReg16(0x60, 0x1A32);
i2c_writeReg16(0x3F, 0x29D1);
i2c_writeReg16(0x0A, 0x7BA0);
i2c_writeReg16(0x49, 0x0C96);
i2c_writeReg16(0x33, 0x45F5);
i2c_writeReg16(0x41, 0x470F);
i2c_writeReg16(0x42, 0x1036);
i2c_writeReg16(0x43, 0x00BB);
}
void AT1846S_setFrequency(const freq_t freq)
{
/* The value to be written in registers is given by: 0.0016*freqency */
uint32_t val = (freq/1000)*16;
uint16_t fHi = (val >> 16) & 0xFFFF;
uint16_t fLo = val & 0xFFFF;
i2c_writeReg16(0x29, fHi);
i2c_writeReg16(0x2A, fLo);
_reloadConfig();
}
void AT1846S_setBandwidth(AT1846S_bw_t band)
{
if(band == AT1846S_BW_25)
{
/* 25kHz bandwidth */
i2c_writeReg16(0x15, 0x1F00);
i2c_writeReg16(0x32, 0x7564);
i2c_writeReg16(0x3A, 0x44C3);
i2c_writeReg16(0x3F, 0x29D2);
i2c_writeReg16(0x3C, 0x0E1C);
i2c_writeReg16(0x48, 0x1E38);
i2c_writeReg16(0x62, 0x3767);
i2c_writeReg16(0x65, 0x248A);
i2c_writeReg16(0x66, 0xFF2E);
i2c_writeReg16(0x7F, 0x0001);
i2c_writeReg16(0x06, 0x0024);
i2c_writeReg16(0x07, 0x0214);
i2c_writeReg16(0x08, 0x0224);
i2c_writeReg16(0x09, 0x0314);
i2c_writeReg16(0x0A, 0x0324);
i2c_writeReg16(0x0B, 0x0344);
i2c_writeReg16(0x0D, 0x1384);
i2c_writeReg16(0x0E, 0x1B84);
i2c_writeReg16(0x0F, 0x3F84);
i2c_writeReg16(0x12, 0xE0EB);
i2c_writeReg16(0x7F, 0x0000);
_maskSetRegister(0x30, 0x3000, 0x3000);
}
else
{
/* 12.5kHz bandwidth */
i2c_writeReg16(0x15, 0x1100);
i2c_writeReg16(0x32, 0x4495);
i2c_writeReg16(0x3A, 0x40C3);
i2c_writeReg16(0x3F, 0x28D0);
i2c_writeReg16(0x3C, 0x0F1E);
i2c_writeReg16(0x48, 0x1DB6);
i2c_writeReg16(0x62, 0x1425);
i2c_writeReg16(0x65, 0x2494);
i2c_writeReg16(0x66, 0xEB2E);
i2c_writeReg16(0x7F, 0x0001);
i2c_writeReg16(0x06, 0x0014);
i2c_writeReg16(0x07, 0x020C);
i2c_writeReg16(0x08, 0x0214);
i2c_writeReg16(0x09, 0x030C);
i2c_writeReg16(0x0A, 0x0314);
i2c_writeReg16(0x0B, 0x0324);
i2c_writeReg16(0x0C, 0x0344);
i2c_writeReg16(0x0D, 0x1344);
i2c_writeReg16(0x0E, 0x1B44);
i2c_writeReg16(0x0F, 0x3F44);
i2c_writeReg16(0x12, 0xE0EB);
i2c_writeReg16(0x7F, 0x0000);
_maskSetRegister(0x30, 0x3000, 0x0000);
}
_reloadConfig();
}
void AT1846S_setOpMode(AT1846S_op_t mode)
{
if(mode == AT1846S_OP_DMR)
{
/* DMR mode */
i2c_writeReg16(0x3A, 0x00C2);
i2c_writeReg16(0x33, 0x45F5);
i2c_writeReg16(0x41, 0x4731);
i2c_writeReg16(0x42, 0x1036);
i2c_writeReg16(0x43, 0x00BB);
i2c_writeReg16(0x58, 0xBCFD);
i2c_writeReg16(0x44, 0x06CC);
i2c_writeReg16(0x40, 0x0031);
}
else
{
/* FM mode */
i2c_writeReg16(0x33, 0x44A5);
i2c_writeReg16(0x41, 0x4431);
i2c_writeReg16(0x42, 0x10F0);
i2c_writeReg16(0x43, 0x00A9);
i2c_writeReg16(0x58, 0xBC05);
i2c_writeReg16(0x44, 0x06FF);
i2c_writeReg16(0x40, 0x0030);
}
_reloadConfig();
}
void AT1846S_setFuncMode(AT1846S_func_t mode)
{
/*
* Functional mode is controlled by bits 5 (RX on) and 6 (TX on) in register
* 0x30. With a cast and shift we can do it easily...
*
* Note about sanity check: if value is greater than 0x0040 we are trying to
* turn on both RX and TX, which is NOT good.
*/
uint16_t value = ((uint16_t) mode) << 5;
if(value > 0x0040) return;
_maskSetRegister(0x30, 0x0060, value);
}
uint16_t AT1846S_readRSSI()
{
return i2c_readReg16(0x1B);
}
void AT1846S_setPgaGain(uint8_t gain)
{
uint16_t pga = (gain & 0x1F) << 6;
_maskSetRegister(0x0A, 0x07C0, pga);
}
void AT1846S_setMicGain(uint8_t gain)
{
_maskSetRegister(0x41, 0x007F, ((uint16_t) gain));
}
void AT1846S_setAgcGain(uint8_t gain)
{
uint16_t agc = (gain & 0x0F) << 8;
_maskSetRegister(0x44, 0x0F00, agc);
}
void AT1846S_setTxDeviation(uint8_t dev)
{
_maskSetRegister(0x59, 0x003F, ((uint16_t) dev));
}
void AT1846S_setRxAudioGain(uint8_t gainWb, uint8_t gainNb)
{
uint16_t value = (gainWb & 0x0F) << 8;
_maskSetRegister(0x44, 0x0F00, value);
_maskSetRegister(0x44, 0x000F, ((uint16_t) gainNb));
}
void AT1846S_setPaDrive(uint8_t value)
{
uint16_t pa = value << 11;
_maskSetRegister(0x0A, 0x7800, pa);
}
void AT1846S_setAnalogSqlThresh(uint8_t thresh)
{
i2c_writeReg16(0x49, ((uint16_t) thresh));
}

Wyświetl plik

@ -0,0 +1,121 @@
/***************************************************************************
* Copyright (C) 2020 by Federico Amedeo Izzo IU2NUO, *
* Niccolò Izzo IU2KIN *
* Frederik Saraci IU2NRO *
* Silvano Seva IU2KWO *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 3 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, see <http://www.gnu.org/licenses/> *
***************************************************************************/
#ifndef AT1846S_H
#define AT1846S_H
#include <stdint.h>
#include <stdbool.h>
#include <datatypes.h>
typedef enum
{
AT1846S_BW_12P5 = 0,
AT1846S_BW_25 = 1
}
AT1846S_bw_t;
typedef enum
{
AT1846S_OP_FM = 0,
AT1846S_OP_DMR = 1
}
AT1846S_op_t;
typedef enum
{
AT1846S_OFF = 0,
AT1846S_RX = 1,
AT1846S_TX = 2,
}
AT1846S_func_t;
/**
*
*/
void AT1846S_init();
/**
*
*/
void AT1846S_postInit();
/**
*
*/
void AT1846S_setFrequency(const freq_t freq);
/**
*
*/
void AT1846S_setBandwidth(AT1846S_bw_t band);
/**
*
*/
void AT1846S_setOpMode(AT1846S_op_t mode);
/**
*
*/
void AT1846S_setFuncMode(AT1846S_func_t mode);
/**
*
*/
uint16_t AT1846S_readRSSI();
/**
*
*/
void AT1846S_setPgaGain(uint8_t gain);
/**
*
*/
void AT1846S_setMicGain(uint8_t gain);
/**
*
*/
void AT1846S_setTxDeviation(uint8_t dev);
/**
*
*/
void AT1846S_setAgcGain(uint8_t gain);
/**
*
*/
void AT1846S_setRxAudioGain(uint8_t gainWb, uint8_t gainNb);
/**
*
*/
void AT1846S_setPaDrive(uint8_t value);
/**
*
*/
void AT1846S_setAnalogSqlThresh(uint8_t thresh);
#endif /* AT1846S_H */