Enabled measurement of volume level on MD-UV3x0

platform/drivers/ADC/ADC1_MDx.c

@@ -24,7 +24,7 @@
 /*
  * The sample buffer is structured as follows:
  *
- * | vbat | rssi | vox | vol |
+ * | vbat | vol | rssi | vox |
  *
  * NOTE: we are forced to allocate it through a malloc in order to make it be
  * in the "large" 128kB RAM. This because the linker script maps the .data and
@@ -48,8 +48,8 @@ void adc1_init()
      * - PB0: RSSI level
      */
     gpio_setMode(AIN_VBAT,   INPUT_ANALOG);
-    #if  defined(PLATFORM_MD3x0)
     gpio_setMode(AIN_VOLUME, INPUT_ANALOG);
+    #if  defined(PLATFORM_MD3x0)
     gpio_setMode(AIN_MIC,    INPUT_ANALOG);
     gpio_setMode(AIN_RSSI,   INPUT_ANALOG);
     #endif
@@ -85,8 +85,9 @@ void adc1_init()
                |  (3 << 10)  /* CH3, vox level on PA3                  */
                |  (0 << 15); /* CH0, volume potentiometer level on PA0 */
     #else
-    ADC1->SQR1 = 0;          /* Convert one channel                    */
-    ADC1->SQR3 |= (1 << 0);  /* CH1, battery voltage on PA1            */
+    ADC1->SQR1 = 1 << 20;    /* Convert two channel                    */
+    ADC1->SQR3 |= (1 << 0)   /* CH1, battery voltage on PA1            */
+               |  (0 << 15); /* CH0, volume potentiometer level on PA0 */
     #endif
 
     /* DMA2 Stream 0 configuration:

platform/drivers/ADC/ADC1_MDx.h

@@ -49,9 +49,9 @@ void adc1_terminate();
 /**
  * Get current measurement of a given channel, mapped as below:
  * - channel 0: battery voltage
- * - channel 1: RSSI level
- * - channel 2: vox level
- * - channel 3: volume level
+ * - channel 1: volume level
+ * - channel 2: RSSI level
+ * - channel 3: vox level
  *
  * NOTE: the mapping above DOES NOT correspond to the physical ADC channel
  * mapping!

platform/drivers/baseband/radio_MD3x0.c

@@ -290,7 +290,7 @@ float radio_getRssi(const freq_t rxFreq)
     if(rxFreq < 401035000) offset_index = 0;
     if(rxFreq > 479995000) offset_index = 8;
 
-    float rssi_mv  = adc1_getMeasurement(1);
+    float rssi_mv  = adc1_getMeasurement(2);
     float rssi_dbm = (rssi_mv - rssi_offset[offset_index]) / rssi_gain;
     return rssi_dbm;
 }

platform/targets/MD-UV380/hwconfig.h

@@ -72,6 +72,7 @@
 #define RED_LED    GPIOE,1
 
 /* Analog inputs */
+#define AIN_VOLUME GPIOA,0
 #define AIN_VBAT   GPIOA,1
 
 /* Channel selection rotary encoder */

platform/targets/MD-UV380/platform.c

@@ -147,7 +147,7 @@ float platform_getMicLevel()
 
 float platform_getVolumeLevel()
 {
-    return 0.0f;
+    return adc1_getMeasurement(1);
 }
 
 uint8_t platform_getChSelector()