kopia lustrzana https://github.com/OpenRTX/OpenRTX
Update README.md
rodzic
ab306eab66
commit
3fd2e6ddc1
21
README.md
21
README.md
|
@ -1,5 +1,10 @@
|
|||
# OpenDMR
|
||||
## Open source firmware for the TYT MD380
|
||||
# OpenRTX
|
||||
## Modular Open Source Radio Firmware
|
||||
|
||||
OpenRTX is a free and open source firmware for digitam ham radios, top-down designed
|
||||
with modularity, flexibility and performance in mind.
|
||||
|
||||
Currently OpenRTX is being actively developed for the TYT MD-380/390 and MD-UV380/390.
|
||||
|
||||
This firmware is *highly experimental* and is not in a usable state right now,
|
||||
however contributions and testing are welcome and accepted.
|
||||
|
@ -9,7 +14,7 @@ however contributions and testing are welcome and accepted.
|
|||
To build and install the firmware, first clone this repository:
|
||||
|
||||
```
|
||||
git clone https://github.com/n1zzo/OpenDMR
|
||||
git clone https://github.com/n1zzo/OpenRTX
|
||||
```
|
||||
|
||||
To build the firmware you need to have a toolchain for the ARM ISA installed
|
||||
|
@ -17,11 +22,11 @@ on you system, you can install one using your package manager.
|
|||
You can then proceed in building the firmware:
|
||||
|
||||
```
|
||||
cd OpenDMR
|
||||
cd OpenRTX
|
||||
make
|
||||
```
|
||||
|
||||
If everithing compiled without errors you can connect your radio via USB,
|
||||
If everything compiled without errors you can connect your radio via USB,
|
||||
put it in recovery mode (by powering it on with the PTT and the button
|
||||
above it pressed), and flash the firmware:
|
||||
|
||||
|
@ -39,12 +44,12 @@ we still owe you the two liters, Travis!
|
|||
|
||||
## Credits
|
||||
|
||||
OpenDMR was created by:
|
||||
OpenRTX was created by:
|
||||
|
||||
- Niccolò Izzo IU2KIN <n@izzo.sh>
|
||||
- Silvano Seva IU2KWO <silseva@fastwebnet.it>
|
||||
- Federico Izzo IU2NUO <federico@izzo.pro>
|
||||
|
||||
All this was made possible by the huge reverse engineering effort of
|
||||
Travis Goodspeed and all the contributors of [md380tools](https://github.com/travisgoodspeed/md380tools).
|
||||
A huge thank goes to Roger Clark, and his [OpenGD77](https://github.com/rogerclarkmelbourne/OpenGD77) which inspired this project,
|
||||
and which we aspire becoming a part of.
|
||||
A huge thank goes to Roger Clark, and his [OpenGD77](https://github.com/rogerclarkmelbourne/OpenGD77) which inspired this project.
|
||||
|
|
Ładowanie…
Reference in New Issue