Hamlib/yaesu/ft767gx.c

1520 wiersze
42 KiB
C

/*
* hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com)
*
* ft767gx.c - (C) Steve Conklin 2007
* adapted from ft757gx.c by Stephane Fillod 2004
* This shared library provides an API for communicating
* via serial interface to an FT-767GX using the "CAT" interface
* box (FIF-232C) or similar
*
*
* $Id:
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
/*
* TODO
*
* 1. Allow cached reads
* 2. set_mem/get_mem, get_channel, set_split/get_split,
* set_func/get_func
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include "hamlib/rig.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "ft767gx.h"
static int ft767_init(RIG *rig);
static int ft767_cleanup(RIG *rig);
static int ft767_open(RIG *rig);
static int ft767_close(RIG *rig);
static int ft767_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
static int ft767_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
static int ft767_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); /* select mode */
static int ft767_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width); /* get mode */
static int ft767_set_vfo(RIG *rig, vfo_t vfo); /* select vfo */
static int ft767_get_vfo(RIG *rig, vfo_t *vfo); /* get vfo */
static int ft767_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt);
static int ft767_set_ctcss_tone(RIG * rig, vfo_t vfo, tone_t tone);
static int ft767_get_ctcss_tone(RIG * rig, vfo_t vfo, tone_t *tone);
static int ft767_set_ctcss_sql(RIG * rig, vfo_t vfo, tone_t tone);
static int ft767_get_ctcss_sql(RIG * rig, vfo_t vfo, tone_t *tone);
static int ft767_set_split_freq(RIG * rig, vfo_t vfo, freq_t tx_freq);
static int ft767_get_split_freq(RIG * rig, vfo_t vfo, freq_t * tx_freq);
static int ft767_set_split_mode(RIG * rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width);
static int ft767_get_split_mode(RIG * rig, vfo_t vfo, rmode_t * tx_mode, pbwidth_t * tx_width);
static int ft767_set_split_vfo(RIG * rig, vfo_t vfo, split_t split, vfo_t tx_vfo);
static int ft767_get_split_vfo(RIG * rig, vfo_t vfo, split_t * split, vfo_t *tx_vfo);
/* Private helper function prototypes */
static int ft767_send_block_and_ack(RIG *rig, unsigned char *cmd, size_t length);
static int ft767_get_update_data(RIG *rig);
static int ft767_enter_CAT(RIG *rig);
static int ft767_leave_CAT(RIG *rig);
static int ft767_set_split(RIG *rig, unsigned int split);
static unsigned char vfo2rig(RIG *rig, vfo_t vfo);
static vfo_t rig2vfo(unsigned char status);
static int mode2rig(RIG *rig, rmode_t mode);
static int rig2mode(RIG *rig, int md, rmode_t *mode, pbwidth_t *width);
/* static int ctcss2rig(RIG *rig, tone_t tone); */
static int rig2ctcss(RIG *rig, unsigned char tn, tone_t *tone);
/*
* On the rig used by the author of this software, the values returned
* by the rig for the CTCSS tones are different than those in the Yaesu
* documentation. This could possibly be because he tone module in that
* rig is an aftermarket board sold by the piexx company. Leaving the
* following undefined uses the values discovered by experimentation. For
* The original values defined in the Yaesu documentation, uncomment it.
*/
/* #define USE_YAESU_PUBLISHED_TONES */
/* Valid command codes */
#define CMD_CAT_SW 0x00
#define CMD_CHECK 0x01
#define CMD_UP10HZ 0x02
#define CMD_DN10HZ 0x03
#define CMD_PROG_UP 0x04
#define CMD_PROG_DN 0x05
#define CMD_BAND_UP 0x06
#define CMD_BAND_DN 0x07
#define CMD_FREQ_SET 0x08
#define CMD_VFOMR 0x09
#define CMD_MULTICMD 0x0A /* This command code overloaded */
#define CMD_TONE_SET 0x0C
#define CMD_ACK 0x0B
/* subcommands for command code 0x0A */
/* values 0 - 9 select memories */
#define SUBCMD_MEM0 0x00 /* 8 bytes returned */
#define SUBCMD_MEM1 0x01 /* 8 bytes returned */
#define SUBCMD_MEM2 0x02 /* 8 bytes returned */
#define SUBCMD_MEM3 0x03 /* 8 bytes returned */
#define SUBCMD_MEM4 0x04 /* 8 bytes returned */
#define SUBCMD_MEM5 0x05 /* 8 bytes returned */
#define SUBCMD_MEM6 0x06 /* 8 bytes returned */
#define SUBCMD_MEM7 0x07 /* 8 bytes returned */
#define SUBCMD_MEM8 0x08 /* 8 bytes returned */
#define SUBCMD_MEM9 0x09 /* 8 bytes returned */
#define SUBCMD_MODE_LSB 0x10 /* 8 bytes returned */
#define SUBCMD_MODE_USB 0x11 /* 8 bytes returned */
#define SUBCMD_MODE_CW 0x12 /* 8 bytes returned */
#define SUBCMD_MODE_AM 0x13 /* 8 bytes returned */
#define SUBCMD_MODE_FM 0x14 /* 8 bytes returned */
#define SUBCMD_MODE_FSK 0x15 /* 8 bytes returned */
#define SUBCMD_HG_HAM 0x20 /* ham coverage */
#define SUBCMD_HG_GEN 0x21 /* general coverage */
#define SUBCMD_SPLIT 0x30 /* toggle split */
#define SUBCMD_CLAR 0x40 /* toggle clarifier */
#define SUBCMD_MTOV 0x50 /* memory to VFO */
#define SUBCMD_VTOM 0x60 /* VFO to memory */
#define SUBCMD_SWAP 0x70 /* swap VFO, memory */
#define SUBCMD_ACLR 0x80 /* turn off SPLIT, CLAR< OFFSET */
/*
* Some useful offsets in the status update map (offset)
*
* Status Update Chart, FT767GXII
*/
#define STATUS_FLAGS 0
#define STATUS_CURR_FREQ 1 /* Operating Frequency */
#define STATUS_CURR_TONE 5
#define STATUS_CURR_MODE 6
#define STATUS_VFOA_FREQ 14
#define STATUS_VFOA_MODE 19
#define STATUS_VFOB_FREQ 20
#define STATUS_VFOB_MODE 25
/* Status bit masks */
#define STATUS_MASK_PTT 0x01
#define STATUS_MASK_HG 0x02
#define STATUS_MASK_TXINH 0x04
#define STATUS_MASK_SPLIT 0x08
#define STATUS_MASK_VFO 0x10
#define STATUS_MASK_MEM 0x20
#define STATUS_MASK_CLAR 0x40
#define STATUS_MASK_CAT 0x80
/* mode byte */
#define MODE_LSB 0x0
#define MODE_USB 0x1
#define MODE_CW 0x2
#define MODE_AM 0x3
#define MODE_FM 0x4
#define MODE_FSK 0x5
/*
* Things that I need to figure out how to fit in
*/
//#define VFO_OPERATIONS_LIST (RIG_OP_FROM_VFO | RIG_OP_TO_VFO | RIG_OP_TOGGLE)
/* These VFO OPS can only be applied to the current VFO */
// RIG_OP_UP = (1<<5), /*!< UP increment VFO freq by tuning step*/
// RIG_OP_DOWN = (1<<6), /*!< DOWN decrement VFO freq by tuning step*/
// RIG_OP_BAND_UP = (1<<7), /*!< Band UP */
/*
#define FT767_MEM_CAP { \
.freq = 1, \
.mode = 1, \
.width = 1,
.ctcss_tone = 1 \
}
*/
/*
* End of things not put in yet
*/
/*
* Receiver caps
*/
#define FT767GX_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_PKTFM)
#define FT767GX_HF_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)
/*
* TX caps
*/
#define FT767GX_ALL_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_PKTFM)
#define FT767GX_HF_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB)
#define CTCSS_TONE_LIST \
670, 710, 747, 770, 797, 825, 854, 885, 915, 948, \
1000, 1035, 1072, 1109, 1148, 1188, 1230, 1273, 1318, 1365, \
1413, 1462, 1514, 1567, 1622, 1679, 1738, 1799, 1862, 1928, \
2035, 2107, 2181, 2257, 2336, 2418, 2503, 0
/*
* future - private data
*
*/
struct ft767_priv_data {
unsigned char pacing; /* pacing value */
unsigned int read_update_delay; /* depends on pacing value */
unsigned char current_vfo; /* active VFO from last cmd , can be either RIG_VFO_A or RIG_VFO_B only */
unsigned char update_data[FT767GX_STATUS_UPDATE_DATA_LENGTH]; /* returned data */
unsigned char rx_data[FT767GX_STATUS_UPDATE_DATA_LENGTH]; /* returned data */
unsigned char ack_cmd[5];
};
const tone_t static_767gx_ctcss_list[] = {
CTCSS_TONE_LIST
};
/*
* ft767gx rigs capabilities.
* Also this struct is READONLY!
*/
const struct rig_caps ft767gx_caps = {
.rig_model = RIG_MODEL_FT767,
.model_name = "FT-767GX",
.mfg_name = "Yaesu",
.version = "0.2",
.copyright = "LGPL",
.status = RIG_STATUS_BETA,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800,
.serial_rate_max = 4800,
.serial_data_bits = 8,
.serial_stop_bits = 2,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = FT767GX_WRITE_DELAY,
.post_write_delay = FT767GX_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 0,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.ctcss_list = static_767gx_ctcss_list,
.dcs_list = NULL,
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.transceive = RIG_TRN_OFF,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {RIG_CHAN_END, }, /* TODO need memory channel capabilities here */
// .chan_list = {0, 9, RIG_MTYPE_MEM, RIG_CHAN_END, }, /* TODO need memory channel capabilities here */
.rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = { { .start = kHz(100), .end = 29999999,
.modes = FT767GX_ALL_RX_MODES,.low_power = -1,.high_power = -1},
RIG_FRNG_END, }, /* rx range */
.tx_range_list2 = { {kHz(1500),1999900,FT767GX_HF_TX_MODES,.low_power = 5000,.high_power = 100000},
{.start = kHz(3500),3999900,FT767GX_HF_TX_MODES,5000,100000},
{.start = kHz(7000),7499900,FT767GX_HF_TX_MODES,5000,100000},
{.start = MHz(10),10499900,FT767GX_HF_TX_MODES,5000,100000},
{.start = MHz(14),14499900,FT767GX_HF_TX_MODES,5000,100000},
{.start = MHz(18),18499900,FT767GX_HF_TX_MODES,5000,100000},
{.start = MHz(21),21499900,FT767GX_HF_TX_MODES,5000,100000},
{.start = kHz(24500),24999900,FT767GX_HF_TX_MODES,5000,100000},
{.start = MHz(28),29999900,FT767GX_HF_TX_MODES,5000,100000},
{.start = MHz(50),59999900,FT767GX_ALL_TX_MODES,5000,10000},
{.start = MHz(144),147999900,FT767GX_ALL_TX_MODES,5000,10000},
{.start = MHz(430),449999990,FT767GX_ALL_TX_MODES,5000,10000},
RIG_FRNG_END, },
.tuning_steps = {
{FT767GX_ALL_RX_MODES,10},
{FT767GX_ALL_RX_MODES,100},
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
RIG_FLT_END,
},
.priv = NULL, /* private data */
.rig_init = ft767_init,
.rig_cleanup = ft767_cleanup,
.rig_open = ft767_open, /* port opened */
.rig_close = ft767_close, /* port closed */
.set_freq = ft767_set_freq, /* set freq */
.get_freq = ft767_get_freq, /* get freq */
.set_mode = ft767_set_mode, /* set mode */
.get_mode = ft767_get_mode, /* get mode */
.set_vfo = ft767_set_vfo, /* set vfo */
.get_vfo = ft767_get_vfo, /* get vfo */
.set_ptt = NULL, /* set ptt */
.get_ptt = ft767_get_ptt, /* get ptt */
.set_ctcss_tone = ft767_set_ctcss_tone,
.get_ctcss_tone = ft767_get_ctcss_tone,
.set_ctcss_sql = ft767_set_ctcss_sql,
.get_ctcss_sql = ft767_get_ctcss_sql,
.set_split_freq = ft767_set_split_freq,
.get_split_freq = ft767_get_split_freq,
.set_split_mode = ft767_set_split_mode,
.get_split_mode = ft767_get_split_mode,
.set_split_vfo = ft767_set_split_vfo,
.get_split_vfo = ft767_get_split_vfo,
};
/*
* _init
*
*/
int ft767_init(RIG *rig) {
struct ft767_priv_data *p;
if (!rig)
return -RIG_EINVAL;
p = (struct ft767_priv_data*)malloc(sizeof(struct ft767_priv_data));
if (!p) /* whoops! memory shortage! */
return -RIG_ENOMEM;
rig_debug(RIG_DEBUG_TRACE,"%s called\n", __FUNCTION__);
/* TODO: read pacing from preferences */
p->pacing = FT767GX_PACING_DEFAULT_VALUE; /* set pacing to minimum for now */
p->read_update_delay = FT767GX_DEFAULT_READ_TIMEOUT; /* set update timeout to safe value */
p->current_vfo = RIG_VFO_A; /* default to VFO_A ? */
p->ack_cmd[0] = 00;
p->ack_cmd[1] = 00;
p->ack_cmd[2] = 00;
p->ack_cmd[3] = 00;
p->ack_cmd[4] = 0x0B;
rig->state.priv = (void*)p;
return RIG_OK;
}
/*
* ft767_cleanup routine
* the serial port is closed by the frontend
*/
int ft767_cleanup(RIG *rig) {
if (!rig)
return -RIG_EINVAL;
rig_debug(RIG_DEBUG_TRACE, "%s called\n", __FUNCTION__);
if (rig->state.priv)
free(rig->state.priv);
rig->state.priv = NULL;
return RIG_OK;
}
/*
* ft767_open routine
*
*/
int ft767_open(RIG *rig)
{
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
serial_flush(&rig->state.rigport);
/* send 0 delay PACING cmd to rig */
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
memset(priv->update_data,0,FT767GX_STATUS_UPDATE_DATA_LENGTH);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
memset(priv->update_data,0,FT767GX_STATUS_UPDATE_DATA_LENGTH);
return retval;
}
rig->state.vfo_list = RIG_VFO_A | RIG_VFO_B;
return RIG_OK;
}
/*
* ft767_close routine
*
*/
int ft767_close(RIG *rig)
{
serial_flush(&rig->state.rigport);
return RIG_OK;
}
/*
* This command only functions when operating on a vfo.
*
*/
int ft767_set_freq(RIG *rig, vfo_t vfo, freq_t freq)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_FREQ_SET};
int retval;
/* should the vfo be tested? */
/* fill in first four bytes */
to_bcd(cmd, freq/10, 8);
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
}
return retval;
}
int ft767_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_MULTICMD};
int retval;
/* fill in p1 */
cmd[3] = mode2rig(rig, mode);
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
}
return retval;
}
/*
* Return Freq
*/
int ft767_get_freq(RIG *rig, vfo_t vfo, freq_t *freq)
{
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
/* grab freq and convert */
switch(vfo) {
case RIG_VFO_CURR:
*freq = from_bcd_be(priv->update_data+STATUS_CURR_FREQ, 8);
break;
case RIG_VFO_A:
*freq = from_bcd_be(priv->update_data+STATUS_VFOA_FREQ, 8);
break;
case RIG_VFO_B:
*freq = from_bcd_be(priv->update_data+STATUS_VFOB_FREQ, 8);
break;
default:
return -RIG_EINVAL; /* sorry, wrong VFO */
}
*freq *= 10.0; /* rig reads in 10 Hz increments*/
return RIG_OK;
}
int ft767_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
{
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
switch(vfo) {
case RIG_VFO_CURR:
retval = rig2mode(rig, priv->update_data[STATUS_CURR_MODE], mode, width);
break;
case RIG_VFO_A:
retval = rig2mode(rig, priv->update_data[STATUS_VFOA_MODE], mode, width);
break;
case RIG_VFO_B:
retval = rig2mode(rig, priv->update_data[STATUS_VFOB_MODE], mode, width);
break;
default:
return -RIG_EINVAL; /* sorry, wrong VFO */
}
return retval;
}
/*
* set vfo and store requested vfo for later RIG_VFO_CURR
* requests.
*
*/
int ft767_set_vfo(RIG *rig, vfo_t vfo) {
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR};
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
switch(vfo) {
case RIG_VFO_CURR:
return RIG_OK;
case RIG_VFO_A:
cmd[3] = 0x00;
break;
case RIG_VFO_B:
cmd[3] = 0x01;
break;
default:
return -RIG_EINVAL; /* sorry, wrong VFO */
}
priv->current_vfo = vfo;
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
}
return retval;
}
int ft767_get_vfo(RIG *rig, vfo_t *vfo) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
*vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
return RIG_OK;
}
int ft767_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt)
{
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
*ptt = priv->update_data[STATUS_FLAGS] & 0x01 ? RIG_PTT_ON : RIG_PTT_OFF;
return RIG_OK;
}
/* on this rig, only one tone can be set per VFO or memory,
* and it's active for both tx and receive.
*/
int ft767_set_ctcss_tone(RIG * rig, vfo_t vfo, tone_t tone) {
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_TONE_SET};
int retval;
/* determine whether we have to send high-Q */
switch(tone) {
case 747:
case 797:
case 854:
case 915:
cmd[1] = 1; /* High Q */
break;
default: break;
}
/* fill in p2 and p1 with bcd tone value */
to_bcd(&cmd[2], tone, 4);
/* cmd[3] = tone2rig(rig, tone); */
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
}
return retval;
}
int ft767_get_ctcss_tone(RIG * rig, vfo_t vfo, tone_t *tone) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = rig2ctcss(rig, priv->update_data[STATUS_CURR_TONE], tone);
return retval;
}
int ft767_set_ctcss_sql(RIG * rig, vfo_t vfo, tone_t tone) {
return ft767_set_ctcss_tone(rig, vfo, tone);
}
int ft767_get_ctcss_sql(RIG * rig, vfo_t vfo, tone_t *tone) {
return ft767_get_ctcss_tone(rig, vfo, tone);
}
/* split functions */
int ft767_set_split_freq(RIG * rig, vfo_t vfo, freq_t tx_freq) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
unsigned char freq_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_FREQ_SET};
unsigned char vfo_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR};
vfo_t curr_vfo;
vfo_t change_vfo;
unsigned char curr_split;
int retval;
/* This appears to always pass in VFO_CURR as the vfo */
/* My decision is to only update the xmit VFO if we're in split mode */
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
/* find out how we're currently configured */
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
if(curr_split) {
switch(curr_vfo) {
/* we need to set something */
case RIG_VFO_A:
change_vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
change_vfo = RIG_VFO_A;
break;
case RIG_VFO_MEM:
rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__);
return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo);
return RIG_OK;
}
} else {
/* not in split mode, do nothing */
return RIG_OK;
}
/* fill in first four bytes */
to_bcd(freq_cmd, tx_freq/10, 8);
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
/* change to the xmit VFO */
vfo_cmd[3] = vfo2rig(rig, change_vfo);
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
/* change the freq */
retval = ft767_send_block_and_ack(rig, freq_cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
/* change back to the rcv VFO */
vfo_cmd[3] = vfo2rig(rig, curr_vfo);
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
}
return RIG_OK;
}
int ft767_get_split_freq(RIG * rig, vfo_t vfo, freq_t * tx_freq) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
unsigned int offset;
vfo_t curr_vfo;
unsigned char curr_split;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n",
__FUNCTION__, retval);
return retval;
}
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
if(curr_split) {
switch(curr_vfo) {
/* we need to get something */
case RIG_VFO_A:
offset = STATUS_VFOB_FREQ;
break;
case RIG_VFO_B:
offset = STATUS_VFOA_FREQ;
break;
case RIG_VFO_MEM:
rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__);
return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo);
return RIG_OK;
}
} else {
/* not in split mode, do nothing */
return RIG_OK;
}
*tx_freq = from_bcd_be(priv->update_data+offset, 8);
return RIG_OK;
}
int ft767_set_split_mode(RIG * rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
unsigned char mode_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_MULTICMD};
unsigned char vfo_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR};
vfo_t curr_vfo;
vfo_t change_vfo;
unsigned char curr_split;
int retval;
/* This appears to always pass in VFO_CURR as the vfo */
/* My decision is to only update the xmit mode if we're in split mode */
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
/* find out how we're currently configured */
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
if(curr_split) {
switch(curr_vfo) {
/* we need to set something */
case RIG_VFO_A:
change_vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
change_vfo = RIG_VFO_A;
break;
case RIG_VFO_MEM:
rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__);
return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo);
return RIG_OK;
}
} else {
/* not in split mode, do nothing */
return RIG_OK;
}
/* fill in p1 */
mode_cmd[3] = mode2rig(rig, tx_mode);
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
/* change to the xmit VFO */
vfo_cmd[3] = vfo2rig(rig, change_vfo);
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send vfo change 1 command: status %d\n",
__FUNCTION__, retval);
return retval;
}
/* change the mode */
retval = ft767_send_block_and_ack(rig, mode_cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send mode command: status %d\n",
__FUNCTION__, retval);
return retval;
}
/* change back to the rcv VFO */
vfo_cmd[3] = vfo2rig(rig, curr_vfo);
retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send vfo change 2command: status %d\n",
__FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
}
return RIG_OK;
}
int ft767_get_split_mode(RIG * rig, vfo_t vfo, rmode_t * tx_mode, pbwidth_t * tx_width) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
unsigned int offset;
vfo_t curr_vfo;
unsigned char curr_split;
retval = ft767_get_update_data(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n",
__FUNCTION__, retval);
return retval;
}
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
if(curr_split) {
switch(curr_vfo) {
/* we need to get something */
case RIG_VFO_A:
offset = STATUS_VFOB_MODE;
break;
case RIG_VFO_B:
offset = STATUS_VFOA_MODE;
break;
case RIG_VFO_MEM:
rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__);
return RIG_OK;
default:
rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo);
return RIG_OK;
}
} else {
/* not in split mode, do nothing */
return RIG_OK;
}
/* get the actual mode */
retval = rig2mode(rig, priv->update_data[offset], tx_mode, tx_width);
return retval;
}
int ft767_set_split_vfo(RIG * rig, vfo_t vfo, split_t split, vfo_t tx_vfo) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x00};
int retval;
vfo_t curr_vfo;
vfo_t future_vfo;
unsigned char curr_split;
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
if (!rig)
return -RIG_EINVAL;
rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed tx_vfo = 0x%02x\n", __func__, tx_vfo);
rig_debug(RIG_DEBUG_TRACE, "%s: passed split = 0x%02x\n", __func__, split);
if ((tx_vfo != RIG_VFO_A) && (tx_vfo != RIG_VFO_B))
return -RIG_EINVAL;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0)
return retval;
/* find out which VFO we're currently using */
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
/*
* If split is enabled, Set the current VFO to the opposite of
* the one specified in tx_vfo. If split is not enabled, then don't change anything.
*/
switch(split) {
case RIG_SPLIT_OFF:
/* turn off split, leave everything else alone */
return ft767_set_split(rig, 0);
break;
case RIG_SPLIT_ON:
switch(tx_vfo) {
case RIG_VFO_CURR:
// we need to switch VFOs
if (curr_vfo == RIG_VFO_A)
future_vfo = RIG_VFO_B;
else if (curr_vfo == RIG_VFO_B)
future_vfo = RIG_VFO_B;
else {
/* Currently using memory! */
rig_debug(RIG_DEBUG_ERR, "%s: RIG_VFO_CURR requested when it is a memory\n", __func__);
return -RIG_EINVAL;
}
break;
case RIG_VFO_A:
future_vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
future_vfo = RIG_VFO_A;
break;
default:
return -RIG_EINVAL; /* sorry, wrong VFO */
}
serial_flush(&rig->state.rigport);
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
/* See whether we need to toggle the split state */
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
if (curr_split) curr_split = RIG_SPLIT_ON;
if (curr_split != split) {
cmd[3] = SUBCMD_SPLIT;
cmd[4] = CMD_MULTICMD;
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send split command: status %d\n",
__FUNCTION__, retval);
return retval;
}
}
/* now set the rx vfo if needed */
if (curr_vfo != future_vfo) {
cmd[3] = vfo2rig(rig, future_vfo);
cmd[4] = CMD_VFOMR;
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send set vfo command: status %d\n",
__FUNCTION__, retval);
return retval;
}
}
/* Make sure clarifier is off */
if (priv->update_data[STATUS_FLAGS] & STATUS_MASK_CLAR) {
cmd[3] = SUBCMD_CLAR;
cmd[4] = CMD_MULTICMD;
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send set clar command: status %d\n",
__FUNCTION__, retval);
return retval;
}
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
return retval;
}
break;
default:
return -RIG_EINVAL;
}
return RIG_OK;
}
int ft767_get_split_vfo(RIG * rig, vfo_t vfo, split_t * split, vfo_t *tx_vfo) {
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
vfo_t curr_vfo;
retval = ft767_get_update_data(rig); /* get whole shebang from rig */
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n",
__FUNCTION__, retval);
return retval;
}
/* TODO if SPLIT is enabled, return which VFO is the transmit VFO!!
*/
if (priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT)
*split = RIG_SPLIT_ON;
else
*split = RIG_SPLIT_OFF;
curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]);
switch (curr_vfo) {
case RIG_VFO_A:
*tx_vfo = RIG_VFO_B;
break;
case RIG_VFO_B:
*tx_vfo = RIG_VFO_A;
break;
default:
/* we don't know how to deal with MEM, anything else is an error */
/* TODO make sure this is what we want to do here */
rig_debug(RIG_DEBUG_ERR,"%s: current vfo is %d with split\n", __FUNCTION__, curr_vfo);
return -RIG_EINVAL;
break;
}
return RIG_OK;
}
/* End of hamlib API-mapped functions */
/*
* This function puts the radio in CAT mode
*/
int ft767_enter_CAT(RIG *rig) {
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_CAT_SW};
rig_debug(RIG_DEBUG_TRACE, "%s: Entered\n", __FUNCTION__);
return ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
}
/*
* This function takes the radio out of CAT mode
*/
int ft767_leave_CAT(RIG *rig) {
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x01, CMD_CAT_SW};
rig_debug(RIG_DEBUG_TRACE, "%s: Entered\n", __FUNCTION__);
return ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
}
/*
* The Yaesu interface is convoluted and braindead.
*
* Private helper function. The 767GX has a handshaking system that works like this:
*
* 5 byte command block sent to rig
* (5 to 20 mS delay)
* Rig echos 5 byte command block back
* Send a 5 byte ACK block to the rig
* (5 to 20 mS delay)
*
* Rig sends back a status update block (5-86 bytes)
* The status update block is received in reverse byte order from the way it's structured
*
* In addition, You must send a command to enable CAT mode, and disable when done.
* When in CAT mode, the front panel of the radio is locked out.
*
* There is an error in the manual, the response length for a TONE SET command
* is 26 bytes, not 5.
*/
int ft767_send_block_and_ack(RIG *rig, unsigned char *cmd, size_t length)
{
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
size_t replylen, cpycnt;
unsigned char cmd_echo_buf[5];
int retval;
unsigned char *src, *dst;
/* Validate command and set length of data returned */
switch(cmd[4]) {
case CMD_CHECK:
case CMD_CAT_SW:
replylen = 86;
break;
case CMD_UP10HZ:
case CMD_DN10HZ:
case CMD_PROG_UP:
case CMD_PROG_DN:
case CMD_BAND_UP:
case CMD_BAND_DN:
case CMD_FREQ_SET:
case CMD_VFOMR:
case CMD_ACK:
replylen = 5;
break;
case CMD_TONE_SET:
replylen = 26; /* the manual is wrong */
break;
case CMD_MULTICMD:
if (cmd[3] <= 0x15) {
replylen = 8;
} else {
switch (cmd[3]) {
case SUBCMD_HG_HAM:
case SUBCMD_HG_GEN:
case SUBCMD_SPLIT:
case SUBCMD_CLAR:
case SUBCMD_MTOV:
replylen = 26;
break;
case SUBCMD_VTOM:
replylen = 68;
break;
case SUBCMD_SWAP:
case SUBCMD_ACLR:
replylen = 5;
break;
default:
/* invalid or unknown sub-command */
rig_debug(RIG_DEBUG_ERR,"%s: invalid sub-command 0x%x for command 0x%x\n",
__FUNCTION__, cmd[3], cmd[4]);
return -RIG_EINVAL;
}
}
break;
default:
/* invalid or unknown command */
rig_debug(RIG_DEBUG_ERR,"%s: invalid command 0x%x\n",
__FUNCTION__, cmd[4]);
return -RIG_EINVAL;
}
/* send the command block */
write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH);
/* read back the command block echo */
retval = read_block(&rig->state.rigport,
(char *) cmd_echo_buf,
YAESU_CMD_LENGTH);
/* see if it matches the command we sent */
if (memcmp(cmd_echo_buf, cmd, YAESU_CMD_LENGTH)) {
rig_debug(RIG_DEBUG_ERR,"%s: Command echo doesn't match\n",
__FUNCTION__);
return -RIG_EINVAL;
}
/* send the ACK */
write_block(&rig->state.rigport, (char *) priv->ack_cmd, YAESU_CMD_LENGTH);
/* read back the response (status bytes) */
retval = read_block(&rig->state.rigport,
(char *) priv->rx_data,
replylen);
// update data
if (retval != replylen) {
rig_debug(RIG_DEBUG_ERR,"%s: Got unexpected number of bytes %d in response\n",
__FUNCTION__, retval);
return -RIG_EINVAL;
}
/* reverse the data buffer returned from the rig */
src = &priv->rx_data[0];
dst = &priv->update_data[replylen-1];
cpycnt = replylen;
while (cpycnt--)
*dst-- = *src++;
return RIG_OK;
}
/*
* private helper function. Retrieves update data from rig.
* using pacing value and buffer indicated in *priv struct.
*
* need to use this when doing ft767_get_* stuff
*/
int ft767_get_update_data(RIG *rig)
{
/* unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x01, CMD_CHECK}; */
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
serial_flush(&rig->state.rigport);
/* Entering CAT updates our data structures */
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
return retval;
}
rig_debug(RIG_DEBUG_TRACE, "%s: status = 0x%02x\n", __func__, priv->update_data[STATUS_FLAGS]);
return RIG_OK;
}
int ft767_set_split(RIG *rig, unsigned int split)
{
unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, SUBCMD_SPLIT, CMD_MULTICMD};
struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv;
int retval;
unsigned int curr_split;
serial_flush(&rig->state.rigport);
/* Entering CAT updates our data structures */
retval = ft767_enter_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval);
return retval;
}
/* See whether we need to toggle */
curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT;
rig_debug(RIG_DEBUG_TRACE,"%s called curr_split = %d, split = %d\n", __FUNCTION__, curr_split, split);
if (curr_split ^ split) {
retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n",
__FUNCTION__, retval);
return retval;
}
}
retval = ft767_leave_CAT(rig);
if (retval < 0) {
rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval);
return retval;
}
return RIG_OK;
}
unsigned char vfo2rig(RIG *rig, vfo_t vfo) {
switch(vfo) {
case RIG_VFO_CURR:
return RIG_OK;
case RIG_VFO_A:
return 0x00;
break;
case RIG_VFO_B:
return 0x01;
break;
case RIG_VFO_MEM:
return 0x02;
break;
default:
return -RIG_EINVAL; /* sorry, wrong VFO */
}
}
vfo_t rig2vfo(unsigned char status) {
if (status & 0x20)
return RIG_VFO_MEM;
else
if (status & 0x10)
return RIG_VFO_B;
else
return RIG_VFO_A;
}
int mode2rig(RIG *rig, rmode_t mode)
{
int md;
/*
* translate mode from generic to ft767 specific
*/
switch(mode) {
case RIG_MODE_LSB: md = SUBCMD_MODE_LSB; break;
case RIG_MODE_USB: md = SUBCMD_MODE_USB; break;
case RIG_MODE_CW: md = SUBCMD_MODE_CW; break;
case RIG_MODE_AM: md = SUBCMD_MODE_AM; break;
case RIG_MODE_FM: md = SUBCMD_MODE_FM; break;
case RIG_MODE_PKTFM: md = SUBCMD_MODE_FSK; break;
default:
return -RIG_EINVAL; /* sorry, wrong MODE */
}
return md;
}
int rig2mode(RIG *rig, int md, rmode_t *mode, pbwidth_t *width)
{
/*
* translate mode from ft767 specific to generic
*/
switch(md & 0x07) {
case MODE_LSB: *mode = RIG_MODE_LSB; break;
case MODE_USB: *mode = RIG_MODE_USB; break;
case MODE_CW: *mode = RIG_MODE_CW; break;
case MODE_AM: *mode = RIG_MODE_AM; break;
case MODE_FM: *mode = RIG_MODE_FM; break;
case MODE_FSK: *mode = RIG_MODE_PKTFM; break;
default:
return -RIG_EINVAL; /* sorry, wrong MODE */
}
return RIG_OK;
}
int rig2ctcss(RIG *rig, unsigned char tn, tone_t *tone) {
/*
* translate tone from ft767 specific to generic
*/
switch(tn) {
#ifdef USE_YAESU_PUBLISHED_TONES
/* Yaesu documentation */
case 0x3E: *tone = 670; break;
case 0x1D: *tone = 670; break; /* High Q */
case 0x3D: *tone = 719; break;
case 0x1C: *tone = 719; break; /* High Q */
case 0x1B: *tone = 747; break; /* High Q */
case 0x3C: *tone = 770; break;
case 0x1A: *tone = 770; break; /* High Q */
case 0x19: *tone = 797; break; /* High Q */
case 0x3B: *tone = 825; break;
case 0x18: *tone = 825; break; /* High Q */
case 0x17: *tone = 854; break; /* High Q */
case 0x3A: *tone = 885; break;
case 0x16: *tone = 885; break; /* High Q */
case 0x15: *tone = 915; break; /* High Q */
case 0x39: *tone = 948; break;
case 0x38: *tone = 1000; break;
case 0x37: *tone = 1035; break;
case 0x36: *tone = 1072; break;
case 0x35: *tone = 1109; break;
case 0x34: *tone = 1148; break;
case 0x33: *tone = 1188; break;
case 0x32: *tone = 1230; break;
case 0x31: *tone = 1273; break;
case 0x30: *tone = 1318; break;
case 0x2F: *tone = 1365; break;
case 0x2E: *tone = 1413; break;
case 0x2D: *tone = 1462; break;
case 0x2C: *tone = 1514; break;
case 0x2B: *tone = 1567; break;
case 0x2A: *tone = 1622; break;
case 0x29: *tone = 1679; break;
case 0x28: *tone = 1738; break;
case 0x27: *tone = 1799; break;
case 0x26: *tone = 1862; break;
case 0x25: *tone = 1928; break;
case 0x24: *tone = 2035; break;
case 0x23: *tone = 2107; break;
case 0x22: *tone = 2181; break;
case 0x21: *tone = 2257; break;
case 0x20: *tone = 2336; break;
case 0x1F: *tone = 2418; break;
case 0x1E: *tone = 2503; break;
#else
/* values found by experimentation */
case 0: *tone = 670; break;
case 33: *tone = 670; break; /* High Q */
case 01: *tone = 719; break;
case 34: *tone = 719; break; /* High Q */
case 35: *tone = 747; break; /* High Q */
case 2: *tone = 770; break;
case 36: *tone = 770; break; /* High Q */
case 37: *tone = 797; break; /* High Q */
case 3: *tone = 825; break;
case 38: *tone = 825; break; /* High Q */
case 39: *tone = 854; break; /* High Q */
case 4: *tone = 885; break;
case 40: *tone = 885; break; /* High Q */
case 41: *tone = 915; break; /* High Q */
case 5: *tone = 948; break;
case 6: *tone = 1000; break;
case 7: *tone = 1035; break;
case 8: *tone = 1072; break;
case 9: *tone = 1109; break;
case 10: *tone = 1148; break;
case 11: *tone = 1188; break;
case 12: *tone = 1230; break;
case 13: *tone = 1273; break;
case 14: *tone = 1318; break;
case 15: *tone = 1365; break;
case 16: *tone = 1413; break;
case 17: *tone = 1462; break;
case 18: *tone = 1514; break;
case 19: *tone = 1567; break;
case 20: *tone = 1622; break;
case 21: *tone = 1679; break;
case 22: *tone = 1738; break;
case 23: *tone = 1799; break;
case 24: *tone = 1862; break;
case 25: *tone = 1928; break;
case 26: *tone = 2035; break;
case 27: *tone = 2107; break;
case 28: *tone = 2181; break;
case 29: *tone = 2257; break;
case 30: *tone = 2336; break;
case 31: *tone = 2418; break;
case 32: *tone = 2503; break;
#endif
default:
rig_debug(RIG_DEBUG_ERR,"%s: Invalid tone value from rig: 0x%02x\n",
__FUNCTION__, tn);
return -RIG_EINVAL; /* sorry, wrong TONE */
break;
}
return RIG_OK;
}