/* * hamlib - (C) Frank Singleton 2000 (vk3fcs@ix.netcom.com) * * ft767gx.c - (C) Steve Conklin 2007 * adapted from ft757gx.c by Stephane Fillod 2004 * This shared library provides an API for communicating * via serial interface to an FT-767GX using the "CAT" interface * box (FIF-232C) or similar * * * $Id: * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ /* * TODO * * 1. Allow cached reads * 2. set_mem/get_mem, get_channel, set_split/get_split, * set_func/get_func * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include /* String function definitions */ #include /* UNIX standard function definitions */ #include "hamlib/rig.h" #include "serial.h" #include "misc.h" #include "yaesu.h" #include "ft767gx.h" static int ft767_init(RIG *rig); static int ft767_cleanup(RIG *rig); static int ft767_open(RIG *rig); static int ft767_close(RIG *rig); static int ft767_set_freq(RIG *rig, vfo_t vfo, freq_t freq); static int ft767_get_freq(RIG *rig, vfo_t vfo, freq_t *freq); static int ft767_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); /* select mode */ static int ft767_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width); /* get mode */ static int ft767_set_vfo(RIG *rig, vfo_t vfo); /* select vfo */ static int ft767_get_vfo(RIG *rig, vfo_t *vfo); /* get vfo */ static int ft767_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt); static int ft767_set_ctcss_tone(RIG * rig, vfo_t vfo, tone_t tone); static int ft767_get_ctcss_tone(RIG * rig, vfo_t vfo, tone_t *tone); static int ft767_set_ctcss_sql(RIG * rig, vfo_t vfo, tone_t tone); static int ft767_get_ctcss_sql(RIG * rig, vfo_t vfo, tone_t *tone); static int ft767_set_split_freq(RIG * rig, vfo_t vfo, freq_t tx_freq); static int ft767_get_split_freq(RIG * rig, vfo_t vfo, freq_t * tx_freq); static int ft767_set_split_mode(RIG * rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width); static int ft767_get_split_mode(RIG * rig, vfo_t vfo, rmode_t * tx_mode, pbwidth_t * tx_width); static int ft767_set_split_vfo(RIG * rig, vfo_t vfo, split_t split, vfo_t tx_vfo); static int ft767_get_split_vfo(RIG * rig, vfo_t vfo, split_t * split, vfo_t *tx_vfo); /* Private helper function prototypes */ static int ft767_send_block_and_ack(RIG *rig, unsigned char *cmd, size_t length); static int ft767_get_update_data(RIG *rig); static int ft767_enter_CAT(RIG *rig); static int ft767_leave_CAT(RIG *rig); static int ft767_set_split(RIG *rig, unsigned int split); static unsigned char vfo2rig(RIG *rig, vfo_t vfo); static vfo_t rig2vfo(unsigned char status); static int mode2rig(RIG *rig, rmode_t mode); static int rig2mode(RIG *rig, int md, rmode_t *mode, pbwidth_t *width); /* static int ctcss2rig(RIG *rig, tone_t tone); */ static int rig2ctcss(RIG *rig, unsigned char tn, tone_t *tone); /* * On the rig used by the author of this software, the values returned * by the rig for the CTCSS tones are different than those in the Yaesu * documentation. This could possibly be because he tone module in that * rig is an aftermarket board sold by the piexx company. Leaving the * following undefined uses the values discovered by experimentation. For * The original values defined in the Yaesu documentation, uncomment it. */ /* #define USE_YAESU_PUBLISHED_TONES */ /* Valid command codes */ #define CMD_CAT_SW 0x00 #define CMD_CHECK 0x01 #define CMD_UP10HZ 0x02 #define CMD_DN10HZ 0x03 #define CMD_PROG_UP 0x04 #define CMD_PROG_DN 0x05 #define CMD_BAND_UP 0x06 #define CMD_BAND_DN 0x07 #define CMD_FREQ_SET 0x08 #define CMD_VFOMR 0x09 #define CMD_MULTICMD 0x0A /* This command code overloaded */ #define CMD_TONE_SET 0x0C #define CMD_ACK 0x0B /* subcommands for command code 0x0A */ /* values 0 - 9 select memories */ #define SUBCMD_MEM0 0x00 /* 8 bytes returned */ #define SUBCMD_MEM1 0x01 /* 8 bytes returned */ #define SUBCMD_MEM2 0x02 /* 8 bytes returned */ #define SUBCMD_MEM3 0x03 /* 8 bytes returned */ #define SUBCMD_MEM4 0x04 /* 8 bytes returned */ #define SUBCMD_MEM5 0x05 /* 8 bytes returned */ #define SUBCMD_MEM6 0x06 /* 8 bytes returned */ #define SUBCMD_MEM7 0x07 /* 8 bytes returned */ #define SUBCMD_MEM8 0x08 /* 8 bytes returned */ #define SUBCMD_MEM9 0x09 /* 8 bytes returned */ #define SUBCMD_MODE_LSB 0x10 /* 8 bytes returned */ #define SUBCMD_MODE_USB 0x11 /* 8 bytes returned */ #define SUBCMD_MODE_CW 0x12 /* 8 bytes returned */ #define SUBCMD_MODE_AM 0x13 /* 8 bytes returned */ #define SUBCMD_MODE_FM 0x14 /* 8 bytes returned */ #define SUBCMD_MODE_FSK 0x15 /* 8 bytes returned */ #define SUBCMD_HG_HAM 0x20 /* ham coverage */ #define SUBCMD_HG_GEN 0x21 /* general coverage */ #define SUBCMD_SPLIT 0x30 /* toggle split */ #define SUBCMD_CLAR 0x40 /* toggle clarifier */ #define SUBCMD_MTOV 0x50 /* memory to VFO */ #define SUBCMD_VTOM 0x60 /* VFO to memory */ #define SUBCMD_SWAP 0x70 /* swap VFO, memory */ #define SUBCMD_ACLR 0x80 /* turn off SPLIT, CLAR< OFFSET */ /* * Some useful offsets in the status update map (offset) * * Status Update Chart, FT767GXII */ #define STATUS_FLAGS 0 #define STATUS_CURR_FREQ 1 /* Operating Frequency */ #define STATUS_CURR_TONE 5 #define STATUS_CURR_MODE 6 #define STATUS_VFOA_FREQ 14 #define STATUS_VFOA_MODE 19 #define STATUS_VFOB_FREQ 20 #define STATUS_VFOB_MODE 25 /* Status bit masks */ #define STATUS_MASK_PTT 0x01 #define STATUS_MASK_HG 0x02 #define STATUS_MASK_TXINH 0x04 #define STATUS_MASK_SPLIT 0x08 #define STATUS_MASK_VFO 0x10 #define STATUS_MASK_MEM 0x20 #define STATUS_MASK_CLAR 0x40 #define STATUS_MASK_CAT 0x80 /* mode byte */ #define MODE_LSB 0x0 #define MODE_USB 0x1 #define MODE_CW 0x2 #define MODE_AM 0x3 #define MODE_FM 0x4 #define MODE_FSK 0x5 /* * Things that I need to figure out how to fit in */ //#define VFO_OPERATIONS_LIST (RIG_OP_FROM_VFO | RIG_OP_TO_VFO | RIG_OP_TOGGLE) /* These VFO OPS can only be applied to the current VFO */ // RIG_OP_UP = (1<<5), /*!< UP increment VFO freq by tuning step*/ // RIG_OP_DOWN = (1<<6), /*!< DOWN decrement VFO freq by tuning step*/ // RIG_OP_BAND_UP = (1<<7), /*!< Band UP */ /* #define FT767_MEM_CAP { \ .freq = 1, \ .mode = 1, \ .width = 1, .ctcss_tone = 1 \ } */ /* * End of things not put in yet */ /* * Receiver caps */ #define FT767GX_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_PKTFM) #define FT767GX_HF_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB) /* * TX caps */ #define FT767GX_ALL_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_PKTFM) #define FT767GX_HF_TX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB) #define CTCSS_TONE_LIST \ 670, 710, 747, 770, 797, 825, 854, 885, 915, 948, \ 1000, 1035, 1072, 1109, 1148, 1188, 1230, 1273, 1318, 1365, \ 1413, 1462, 1514, 1567, 1622, 1679, 1738, 1799, 1862, 1928, \ 2035, 2107, 2181, 2257, 2336, 2418, 2503, 0 /* * future - private data * */ struct ft767_priv_data { unsigned char pacing; /* pacing value */ unsigned int read_update_delay; /* depends on pacing value */ unsigned char current_vfo; /* active VFO from last cmd , can be either RIG_VFO_A or RIG_VFO_B only */ unsigned char update_data[FT767GX_STATUS_UPDATE_DATA_LENGTH]; /* returned data */ unsigned char rx_data[FT767GX_STATUS_UPDATE_DATA_LENGTH]; /* returned data */ unsigned char ack_cmd[5]; }; const tone_t static_767gx_ctcss_list[] = { CTCSS_TONE_LIST }; /* * ft767gx rigs capabilities. * Also this struct is READONLY! */ const struct rig_caps ft767gx_caps = { .rig_model = RIG_MODEL_FT767, .model_name = "FT-767GX", .mfg_name = "Yaesu", .version = "0.2", .copyright = "LGPL", .status = RIG_STATUS_BETA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_NONE, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 4800, .serial_rate_max = 4800, .serial_data_bits = 8, .serial_stop_bits = 2, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = FT767GX_WRITE_DELAY, .post_write_delay = FT767GX_POST_WRITE_DELAY, .timeout = 2000, .retry = 0, .has_get_func = RIG_FUNC_NONE, .has_set_func = RIG_FUNC_NONE, .has_get_level = RIG_LEVEL_NONE, .has_set_level = RIG_LEVEL_NONE, .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, .ctcss_list = static_767gx_ctcss_list, .dcs_list = NULL, .preamp = { RIG_DBLST_END, }, .attenuator = { RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .transceive = RIG_TRN_OFF, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = {RIG_CHAN_END, }, /* TODO need memory channel capabilities here */ // .chan_list = {0, 9, RIG_MTYPE_MEM, RIG_CHAN_END, }, /* TODO need memory channel capabilities here */ .rx_range_list1 = { RIG_FRNG_END, }, /* FIXME: enter region 1 setting */ .tx_range_list1 = { RIG_FRNG_END, }, .rx_range_list2 = { { .start = kHz(100), .end = 29999999, .modes = FT767GX_ALL_RX_MODES,.low_power = -1,.high_power = -1}, RIG_FRNG_END, }, /* rx range */ .tx_range_list2 = { {kHz(1500),1999900,FT767GX_HF_TX_MODES,.low_power = 5000,.high_power = 100000}, {.start = kHz(3500),3999900,FT767GX_HF_TX_MODES,5000,100000}, {.start = kHz(7000),7499900,FT767GX_HF_TX_MODES,5000,100000}, {.start = MHz(10),10499900,FT767GX_HF_TX_MODES,5000,100000}, {.start = MHz(14),14499900,FT767GX_HF_TX_MODES,5000,100000}, {.start = MHz(18),18499900,FT767GX_HF_TX_MODES,5000,100000}, {.start = MHz(21),21499900,FT767GX_HF_TX_MODES,5000,100000}, {.start = kHz(24500),24999900,FT767GX_HF_TX_MODES,5000,100000}, {.start = MHz(28),29999900,FT767GX_HF_TX_MODES,5000,100000}, {.start = MHz(50),59999900,FT767GX_ALL_TX_MODES,5000,10000}, {.start = MHz(144),147999900,FT767GX_ALL_TX_MODES,5000,10000}, {.start = MHz(430),449999990,FT767GX_ALL_TX_MODES,5000,10000}, RIG_FRNG_END, }, .tuning_steps = { {FT767GX_ALL_RX_MODES,10}, {FT767GX_ALL_RX_MODES,100}, RIG_TS_END, }, /* mode/filter list, .remember = order matters! */ .filters = { RIG_FLT_END, }, .priv = NULL, /* private data */ .rig_init = ft767_init, .rig_cleanup = ft767_cleanup, .rig_open = ft767_open, /* port opened */ .rig_close = ft767_close, /* port closed */ .set_freq = ft767_set_freq, /* set freq */ .get_freq = ft767_get_freq, /* get freq */ .set_mode = ft767_set_mode, /* set mode */ .get_mode = ft767_get_mode, /* get mode */ .set_vfo = ft767_set_vfo, /* set vfo */ .get_vfo = ft767_get_vfo, /* get vfo */ .set_ptt = NULL, /* set ptt */ .get_ptt = ft767_get_ptt, /* get ptt */ .set_ctcss_tone = ft767_set_ctcss_tone, .get_ctcss_tone = ft767_get_ctcss_tone, .set_ctcss_sql = ft767_set_ctcss_sql, .get_ctcss_sql = ft767_get_ctcss_sql, .set_split_freq = ft767_set_split_freq, .get_split_freq = ft767_get_split_freq, .set_split_mode = ft767_set_split_mode, .get_split_mode = ft767_get_split_mode, .set_split_vfo = ft767_set_split_vfo, .get_split_vfo = ft767_get_split_vfo, }; /* * _init * */ int ft767_init(RIG *rig) { struct ft767_priv_data *p; if (!rig) return -RIG_EINVAL; p = (struct ft767_priv_data*)malloc(sizeof(struct ft767_priv_data)); if (!p) /* whoops! memory shortage! */ return -RIG_ENOMEM; rig_debug(RIG_DEBUG_TRACE,"%s called\n", __FUNCTION__); /* TODO: read pacing from preferences */ p->pacing = FT767GX_PACING_DEFAULT_VALUE; /* set pacing to minimum for now */ p->read_update_delay = FT767GX_DEFAULT_READ_TIMEOUT; /* set update timeout to safe value */ p->current_vfo = RIG_VFO_A; /* default to VFO_A ? */ p->ack_cmd[0] = 00; p->ack_cmd[1] = 00; p->ack_cmd[2] = 00; p->ack_cmd[3] = 00; p->ack_cmd[4] = 0x0B; rig->state.priv = (void*)p; return RIG_OK; } /* * ft767_cleanup routine * the serial port is closed by the frontend */ int ft767_cleanup(RIG *rig) { if (!rig) return -RIG_EINVAL; rig_debug(RIG_DEBUG_TRACE, "%s called\n", __FUNCTION__); if (rig->state.priv) free(rig->state.priv); rig->state.priv = NULL; return RIG_OK; } /* * ft767_open routine * */ int ft767_open(RIG *rig) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; serial_flush(&rig->state.rigport); /* send 0 delay PACING cmd to rig */ retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); memset(priv->update_data,0,FT767GX_STATUS_UPDATE_DATA_LENGTH); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); memset(priv->update_data,0,FT767GX_STATUS_UPDATE_DATA_LENGTH); return retval; } rig->state.vfo_list = RIG_VFO_A | RIG_VFO_B; return RIG_OK; } /* * ft767_close routine * */ int ft767_close(RIG *rig) { serial_flush(&rig->state.rigport); return RIG_OK; } /* * This command only functions when operating on a vfo. * */ int ft767_set_freq(RIG *rig, vfo_t vfo, freq_t freq) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_FREQ_SET}; int retval; /* should the vfo be tested? */ /* fill in first four bytes */ to_bcd(cmd, freq/10, 8); retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); } return retval; } int ft767_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_MULTICMD}; int retval; /* fill in p1 */ cmd[3] = mode2rig(rig, mode); retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); } return retval; } /* * Return Freq */ int ft767_get_freq(RIG *rig, vfo_t vfo, freq_t *freq) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; /* grab freq and convert */ switch(vfo) { case RIG_VFO_CURR: *freq = from_bcd_be(priv->update_data+STATUS_CURR_FREQ, 8); break; case RIG_VFO_A: *freq = from_bcd_be(priv->update_data+STATUS_VFOA_FREQ, 8); break; case RIG_VFO_B: *freq = from_bcd_be(priv->update_data+STATUS_VFOB_FREQ, 8); break; default: return -RIG_EINVAL; /* sorry, wrong VFO */ } *freq *= 10.0; /* rig reads in 10 Hz increments*/ return RIG_OK; } int ft767_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; switch(vfo) { case RIG_VFO_CURR: retval = rig2mode(rig, priv->update_data[STATUS_CURR_MODE], mode, width); break; case RIG_VFO_A: retval = rig2mode(rig, priv->update_data[STATUS_VFOA_MODE], mode, width); break; case RIG_VFO_B: retval = rig2mode(rig, priv->update_data[STATUS_VFOB_MODE], mode, width); break; default: return -RIG_EINVAL; /* sorry, wrong VFO */ } return retval; } /* * set vfo and store requested vfo for later RIG_VFO_CURR * requests. * */ int ft767_set_vfo(RIG *rig, vfo_t vfo) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR}; struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; switch(vfo) { case RIG_VFO_CURR: return RIG_OK; case RIG_VFO_A: cmd[3] = 0x00; break; case RIG_VFO_B: cmd[3] = 0x01; break; default: return -RIG_EINVAL; /* sorry, wrong VFO */ } priv->current_vfo = vfo; retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); } return retval; } int ft767_get_vfo(RIG *rig, vfo_t *vfo) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; *vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); return RIG_OK; } int ft767_get_ptt(RIG *rig, vfo_t vfo, ptt_t *ptt) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; *ptt = priv->update_data[STATUS_FLAGS] & 0x01 ? RIG_PTT_ON : RIG_PTT_OFF; return RIG_OK; } /* on this rig, only one tone can be set per VFO or memory, * and it's active for both tx and receive. */ int ft767_set_ctcss_tone(RIG * rig, vfo_t vfo, tone_t tone) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_TONE_SET}; int retval; /* determine whether we have to send high-Q */ switch(tone) { case 747: case 797: case 854: case 915: cmd[1] = 1; /* High Q */ break; default: break; } /* fill in p2 and p1 with bcd tone value */ to_bcd(&cmd[2], tone, 4); /* cmd[3] = tone2rig(rig, tone); */ retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); } return retval; } int ft767_get_ctcss_tone(RIG * rig, vfo_t vfo, tone_t *tone) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n", __FUNCTION__, retval); return retval; } retval = rig2ctcss(rig, priv->update_data[STATUS_CURR_TONE], tone); return retval; } int ft767_set_ctcss_sql(RIG * rig, vfo_t vfo, tone_t tone) { return ft767_set_ctcss_tone(rig, vfo, tone); } int ft767_get_ctcss_sql(RIG * rig, vfo_t vfo, tone_t *tone) { return ft767_get_ctcss_tone(rig, vfo, tone); } /* split functions */ int ft767_set_split_freq(RIG * rig, vfo_t vfo, freq_t tx_freq) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; unsigned char freq_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_FREQ_SET}; unsigned char vfo_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR}; vfo_t curr_vfo; vfo_t change_vfo; unsigned char curr_split; int retval; /* This appears to always pass in VFO_CURR as the vfo */ /* My decision is to only update the xmit VFO if we're in split mode */ retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; /* find out how we're currently configured */ curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT; if(curr_split) { switch(curr_vfo) { /* we need to set something */ case RIG_VFO_A: change_vfo = RIG_VFO_B; break; case RIG_VFO_B: change_vfo = RIG_VFO_A; break; case RIG_VFO_MEM: rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__); return RIG_OK; default: rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo); return RIG_OK; } } else { /* not in split mode, do nothing */ return RIG_OK; } /* fill in first four bytes */ to_bcd(freq_cmd, tx_freq/10, 8); retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } /* change to the xmit VFO */ vfo_cmd[3] = vfo2rig(rig, change_vfo); retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } /* change the freq */ retval = ft767_send_block_and_ack(rig, freq_cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } /* change back to the rcv VFO */ vfo_cmd[3] = vfo2rig(rig, curr_vfo); retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); } return RIG_OK; } int ft767_get_split_freq(RIG * rig, vfo_t vfo, freq_t * tx_freq) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; unsigned int offset; vfo_t curr_vfo; unsigned char curr_split; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n", __FUNCTION__, retval); return retval; } curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT; if(curr_split) { switch(curr_vfo) { /* we need to get something */ case RIG_VFO_A: offset = STATUS_VFOB_FREQ; break; case RIG_VFO_B: offset = STATUS_VFOA_FREQ; break; case RIG_VFO_MEM: rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__); return RIG_OK; default: rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo); return RIG_OK; } } else { /* not in split mode, do nothing */ return RIG_OK; } *tx_freq = from_bcd_be(priv->update_data+offset, 8); return RIG_OK; } int ft767_set_split_mode(RIG * rig, vfo_t vfo, rmode_t tx_mode, pbwidth_t tx_width) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; unsigned char mode_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_MULTICMD}; unsigned char vfo_cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_VFOMR}; vfo_t curr_vfo; vfo_t change_vfo; unsigned char curr_split; int retval; /* This appears to always pass in VFO_CURR as the vfo */ /* My decision is to only update the xmit mode if we're in split mode */ retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; /* find out how we're currently configured */ curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT; if(curr_split) { switch(curr_vfo) { /* we need to set something */ case RIG_VFO_A: change_vfo = RIG_VFO_B; break; case RIG_VFO_B: change_vfo = RIG_VFO_A; break; case RIG_VFO_MEM: rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__); return RIG_OK; default: rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo); return RIG_OK; } } else { /* not in split mode, do nothing */ return RIG_OK; } /* fill in p1 */ mode_cmd[3] = mode2rig(rig, tx_mode); retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } /* change to the xmit VFO */ vfo_cmd[3] = vfo2rig(rig, change_vfo); retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send vfo change 1 command: status %d\n", __FUNCTION__, retval); return retval; } /* change the mode */ retval = ft767_send_block_and_ack(rig, mode_cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send mode command: status %d\n", __FUNCTION__, retval); return retval; } /* change back to the rcv VFO */ vfo_cmd[3] = vfo2rig(rig, curr_vfo); retval = ft767_send_block_and_ack(rig, vfo_cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send vfo change 2command: status %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); } return RIG_OK; } int ft767_get_split_mode(RIG * rig, vfo_t vfo, rmode_t * tx_mode, pbwidth_t * tx_width) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; unsigned int offset; vfo_t curr_vfo; unsigned char curr_split; retval = ft767_get_update_data(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n", __FUNCTION__, retval); return retval; } curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT; if(curr_split) { switch(curr_vfo) { /* we need to get something */ case RIG_VFO_A: offset = STATUS_VFOB_MODE; break; case RIG_VFO_B: offset = STATUS_VFOA_MODE; break; case RIG_VFO_MEM: rig_debug(RIG_DEBUG_ERR,"%s: error, in both split and memory modes\n", __FUNCTION__); return RIG_OK; default: rig_debug(RIG_DEBUG_ERR,"%s: error, unknown vfo value %d\n", __FUNCTION__, curr_vfo); return RIG_OK; } } else { /* not in split mode, do nothing */ return RIG_OK; } /* get the actual mode */ retval = rig2mode(rig, priv->update_data[offset], tx_mode, tx_width); return retval; } int ft767_set_split_vfo(RIG * rig, vfo_t vfo, split_t split, vfo_t tx_vfo) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, 0x00}; int retval; vfo_t curr_vfo; vfo_t future_vfo; unsigned char curr_split; rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__); if (!rig) return -RIG_EINVAL; rig_debug(RIG_DEBUG_TRACE, "%s: passed vfo = 0x%02x\n", __func__, vfo); rig_debug(RIG_DEBUG_TRACE, "%s: passed tx_vfo = 0x%02x\n", __func__, tx_vfo); rig_debug(RIG_DEBUG_TRACE, "%s: passed split = 0x%02x\n", __func__, split); if ((tx_vfo != RIG_VFO_A) && (tx_vfo != RIG_VFO_B)) return -RIG_EINVAL; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) return retval; /* find out which VFO we're currently using */ curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); /* * If split is enabled, Set the current VFO to the opposite of * the one specified in tx_vfo. If split is not enabled, then don't change anything. */ switch(split) { case RIG_SPLIT_OFF: /* turn off split, leave everything else alone */ return ft767_set_split(rig, 0); break; case RIG_SPLIT_ON: switch(tx_vfo) { case RIG_VFO_CURR: // we need to switch VFOs if (curr_vfo == RIG_VFO_A) future_vfo = RIG_VFO_B; else if (curr_vfo == RIG_VFO_B) future_vfo = RIG_VFO_B; else { /* Currently using memory! */ rig_debug(RIG_DEBUG_ERR, "%s: RIG_VFO_CURR requested when it is a memory\n", __func__); return -RIG_EINVAL; } break; case RIG_VFO_A: future_vfo = RIG_VFO_B; break; case RIG_VFO_B: future_vfo = RIG_VFO_A; break; default: return -RIG_EINVAL; /* sorry, wrong VFO */ } serial_flush(&rig->state.rigport); retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } /* See whether we need to toggle the split state */ curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT; if (curr_split) curr_split = RIG_SPLIT_ON; if (curr_split != split) { cmd[3] = SUBCMD_SPLIT; cmd[4] = CMD_MULTICMD; retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send split command: status %d\n", __FUNCTION__, retval); return retval; } } /* now set the rx vfo if needed */ if (curr_vfo != future_vfo) { cmd[3] = vfo2rig(rig, future_vfo); cmd[4] = CMD_VFOMR; retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send set vfo command: status %d\n", __FUNCTION__, retval); return retval; } } /* Make sure clarifier is off */ if (priv->update_data[STATUS_FLAGS] & STATUS_MASK_CLAR) { cmd[3] = SUBCMD_CLAR; cmd[4] = CMD_MULTICMD; retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send set clar command: status %d\n", __FUNCTION__, retval); return retval; } } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); return retval; } break; default: return -RIG_EINVAL; } return RIG_OK; } int ft767_get_split_vfo(RIG * rig, vfo_t vfo, split_t * split, vfo_t *tx_vfo) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; vfo_t curr_vfo; retval = ft767_get_update_data(rig); /* get whole shebang from rig */ if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: get_update_data failed with status %d\n", __FUNCTION__, retval); return retval; } /* TODO if SPLIT is enabled, return which VFO is the transmit VFO!! */ if (priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT) *split = RIG_SPLIT_ON; else *split = RIG_SPLIT_OFF; curr_vfo = rig2vfo(priv->update_data[STATUS_FLAGS]); switch (curr_vfo) { case RIG_VFO_A: *tx_vfo = RIG_VFO_B; break; case RIG_VFO_B: *tx_vfo = RIG_VFO_A; break; default: /* we don't know how to deal with MEM, anything else is an error */ /* TODO make sure this is what we want to do here */ rig_debug(RIG_DEBUG_ERR,"%s: current vfo is %d with split\n", __FUNCTION__, curr_vfo); return -RIG_EINVAL; break; } return RIG_OK; } /* End of hamlib API-mapped functions */ /* * This function puts the radio in CAT mode */ int ft767_enter_CAT(RIG *rig) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x00, CMD_CAT_SW}; rig_debug(RIG_DEBUG_TRACE, "%s: Entered\n", __FUNCTION__); return ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); } /* * This function takes the radio out of CAT mode */ int ft767_leave_CAT(RIG *rig) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x01, CMD_CAT_SW}; rig_debug(RIG_DEBUG_TRACE, "%s: Entered\n", __FUNCTION__); return ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); } /* * The Yaesu interface is convoluted and braindead. * * Private helper function. The 767GX has a handshaking system that works like this: * * 5 byte command block sent to rig * (5 to 20 mS delay) * Rig echos 5 byte command block back * Send a 5 byte ACK block to the rig * (5 to 20 mS delay) * * Rig sends back a status update block (5-86 bytes) * The status update block is received in reverse byte order from the way it's structured * * In addition, You must send a command to enable CAT mode, and disable when done. * When in CAT mode, the front panel of the radio is locked out. * * There is an error in the manual, the response length for a TONE SET command * is 26 bytes, not 5. */ int ft767_send_block_and_ack(RIG *rig, unsigned char *cmd, size_t length) { struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; size_t replylen, cpycnt; unsigned char cmd_echo_buf[5]; int retval; unsigned char *src, *dst; /* Validate command and set length of data returned */ switch(cmd[4]) { case CMD_CHECK: case CMD_CAT_SW: replylen = 86; break; case CMD_UP10HZ: case CMD_DN10HZ: case CMD_PROG_UP: case CMD_PROG_DN: case CMD_BAND_UP: case CMD_BAND_DN: case CMD_FREQ_SET: case CMD_VFOMR: case CMD_ACK: replylen = 5; break; case CMD_TONE_SET: replylen = 26; /* the manual is wrong */ break; case CMD_MULTICMD: if (cmd[3] <= 0x15) { replylen = 8; } else { switch (cmd[3]) { case SUBCMD_HG_HAM: case SUBCMD_HG_GEN: case SUBCMD_SPLIT: case SUBCMD_CLAR: case SUBCMD_MTOV: replylen = 26; break; case SUBCMD_VTOM: replylen = 68; break; case SUBCMD_SWAP: case SUBCMD_ACLR: replylen = 5; break; default: /* invalid or unknown sub-command */ rig_debug(RIG_DEBUG_ERR,"%s: invalid sub-command 0x%x for command 0x%x\n", __FUNCTION__, cmd[3], cmd[4]); return -RIG_EINVAL; } } break; default: /* invalid or unknown command */ rig_debug(RIG_DEBUG_ERR,"%s: invalid command 0x%x\n", __FUNCTION__, cmd[4]); return -RIG_EINVAL; } /* send the command block */ write_block(&rig->state.rigport, (char *) cmd, YAESU_CMD_LENGTH); /* read back the command block echo */ retval = read_block(&rig->state.rigport, (char *) cmd_echo_buf, YAESU_CMD_LENGTH); /* see if it matches the command we sent */ if (memcmp(cmd_echo_buf, cmd, YAESU_CMD_LENGTH)) { rig_debug(RIG_DEBUG_ERR,"%s: Command echo doesn't match\n", __FUNCTION__); return -RIG_EINVAL; } /* send the ACK */ write_block(&rig->state.rigport, (char *) priv->ack_cmd, YAESU_CMD_LENGTH); /* read back the response (status bytes) */ retval = read_block(&rig->state.rigport, (char *) priv->rx_data, replylen); // update data if (retval != replylen) { rig_debug(RIG_DEBUG_ERR,"%s: Got unexpected number of bytes %d in response\n", __FUNCTION__, retval); return -RIG_EINVAL; } /* reverse the data buffer returned from the rig */ src = &priv->rx_data[0]; dst = &priv->update_data[replylen-1]; cpycnt = replylen; while (cpycnt--) *dst-- = *src++; return RIG_OK; } /* * private helper function. Retrieves update data from rig. * using pacing value and buffer indicated in *priv struct. * * need to use this when doing ft767_get_* stuff */ int ft767_get_update_data(RIG *rig) { /* unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, 0x01, CMD_CHECK}; */ struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; serial_flush(&rig->state.rigport); /* Entering CAT updates our data structures */ retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); return retval; } rig_debug(RIG_DEBUG_TRACE, "%s: status = 0x%02x\n", __func__, priv->update_data[STATUS_FLAGS]); return RIG_OK; } int ft767_set_split(RIG *rig, unsigned int split) { unsigned char cmd[YAESU_CMD_LENGTH] = { 0x00, 0x00, 0x00, SUBCMD_SPLIT, CMD_MULTICMD}; struct ft767_priv_data *priv = (struct ft767_priv_data*)rig->state.priv; int retval; unsigned int curr_split; serial_flush(&rig->state.rigport); /* Entering CAT updates our data structures */ retval = ft767_enter_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: enter_CAT %d\n", __FUNCTION__, retval); return retval; } /* See whether we need to toggle */ curr_split = priv->update_data[STATUS_FLAGS] & STATUS_MASK_SPLIT; rig_debug(RIG_DEBUG_TRACE,"%s called curr_split = %d, split = %d\n", __FUNCTION__, curr_split, split); if (curr_split ^ split) { retval = ft767_send_block_and_ack(rig, cmd, YAESU_CMD_LENGTH); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: failed to send command: status %d\n", __FUNCTION__, retval); return retval; } } retval = ft767_leave_CAT(rig); if (retval < 0) { rig_debug(RIG_DEBUG_ERR,"%s: leave_CAT %d\n", __FUNCTION__, retval); return retval; } return RIG_OK; } unsigned char vfo2rig(RIG *rig, vfo_t vfo) { switch(vfo) { case RIG_VFO_CURR: return RIG_OK; case RIG_VFO_A: return 0x00; break; case RIG_VFO_B: return 0x01; break; case RIG_VFO_MEM: return 0x02; break; default: return -RIG_EINVAL; /* sorry, wrong VFO */ } } vfo_t rig2vfo(unsigned char status) { if (status & 0x20) return RIG_VFO_MEM; else if (status & 0x10) return RIG_VFO_B; else return RIG_VFO_A; } int mode2rig(RIG *rig, rmode_t mode) { int md; /* * translate mode from generic to ft767 specific */ switch(mode) { case RIG_MODE_LSB: md = SUBCMD_MODE_LSB; break; case RIG_MODE_USB: md = SUBCMD_MODE_USB; break; case RIG_MODE_CW: md = SUBCMD_MODE_CW; break; case RIG_MODE_AM: md = SUBCMD_MODE_AM; break; case RIG_MODE_FM: md = SUBCMD_MODE_FM; break; case RIG_MODE_PKTFM: md = SUBCMD_MODE_FSK; break; default: return -RIG_EINVAL; /* sorry, wrong MODE */ } return md; } int rig2mode(RIG *rig, int md, rmode_t *mode, pbwidth_t *width) { /* * translate mode from ft767 specific to generic */ switch(md & 0x07) { case MODE_LSB: *mode = RIG_MODE_LSB; break; case MODE_USB: *mode = RIG_MODE_USB; break; case MODE_CW: *mode = RIG_MODE_CW; break; case MODE_AM: *mode = RIG_MODE_AM; break; case MODE_FM: *mode = RIG_MODE_FM; break; case MODE_FSK: *mode = RIG_MODE_PKTFM; break; default: return -RIG_EINVAL; /* sorry, wrong MODE */ } return RIG_OK; } int rig2ctcss(RIG *rig, unsigned char tn, tone_t *tone) { /* * translate tone from ft767 specific to generic */ switch(tn) { #ifdef USE_YAESU_PUBLISHED_TONES /* Yaesu documentation */ case 0x3E: *tone = 670; break; case 0x1D: *tone = 670; break; /* High Q */ case 0x3D: *tone = 719; break; case 0x1C: *tone = 719; break; /* High Q */ case 0x1B: *tone = 747; break; /* High Q */ case 0x3C: *tone = 770; break; case 0x1A: *tone = 770; break; /* High Q */ case 0x19: *tone = 797; break; /* High Q */ case 0x3B: *tone = 825; break; case 0x18: *tone = 825; break; /* High Q */ case 0x17: *tone = 854; break; /* High Q */ case 0x3A: *tone = 885; break; case 0x16: *tone = 885; break; /* High Q */ case 0x15: *tone = 915; break; /* High Q */ case 0x39: *tone = 948; break; case 0x38: *tone = 1000; break; case 0x37: *tone = 1035; break; case 0x36: *tone = 1072; break; case 0x35: *tone = 1109; break; case 0x34: *tone = 1148; break; case 0x33: *tone = 1188; break; case 0x32: *tone = 1230; break; case 0x31: *tone = 1273; break; case 0x30: *tone = 1318; break; case 0x2F: *tone = 1365; break; case 0x2E: *tone = 1413; break; case 0x2D: *tone = 1462; break; case 0x2C: *tone = 1514; break; case 0x2B: *tone = 1567; break; case 0x2A: *tone = 1622; break; case 0x29: *tone = 1679; break; case 0x28: *tone = 1738; break; case 0x27: *tone = 1799; break; case 0x26: *tone = 1862; break; case 0x25: *tone = 1928; break; case 0x24: *tone = 2035; break; case 0x23: *tone = 2107; break; case 0x22: *tone = 2181; break; case 0x21: *tone = 2257; break; case 0x20: *tone = 2336; break; case 0x1F: *tone = 2418; break; case 0x1E: *tone = 2503; break; #else /* values found by experimentation */ case 0: *tone = 670; break; case 33: *tone = 670; break; /* High Q */ case 01: *tone = 719; break; case 34: *tone = 719; break; /* High Q */ case 35: *tone = 747; break; /* High Q */ case 2: *tone = 770; break; case 36: *tone = 770; break; /* High Q */ case 37: *tone = 797; break; /* High Q */ case 3: *tone = 825; break; case 38: *tone = 825; break; /* High Q */ case 39: *tone = 854; break; /* High Q */ case 4: *tone = 885; break; case 40: *tone = 885; break; /* High Q */ case 41: *tone = 915; break; /* High Q */ case 5: *tone = 948; break; case 6: *tone = 1000; break; case 7: *tone = 1035; break; case 8: *tone = 1072; break; case 9: *tone = 1109; break; case 10: *tone = 1148; break; case 11: *tone = 1188; break; case 12: *tone = 1230; break; case 13: *tone = 1273; break; case 14: *tone = 1318; break; case 15: *tone = 1365; break; case 16: *tone = 1413; break; case 17: *tone = 1462; break; case 18: *tone = 1514; break; case 19: *tone = 1567; break; case 20: *tone = 1622; break; case 21: *tone = 1679; break; case 22: *tone = 1738; break; case 23: *tone = 1799; break; case 24: *tone = 1862; break; case 25: *tone = 1928; break; case 26: *tone = 2035; break; case 27: *tone = 2107; break; case 28: *tone = 2181; break; case 29: *tone = 2257; break; case 30: *tone = 2336; break; case 31: *tone = 2418; break; case 32: *tone = 2503; break; #endif default: rig_debug(RIG_DEBUG_ERR,"%s: Invalid tone value from rig: 0x%02x\n", __FUNCTION__, tn); return -RIG_EINVAL; /* sorry, wrong TONE */ break; } return RIG_OK; }