kopia lustrzana https://github.com/Hamlib/Hamlib
567 wiersze
16 KiB
C
567 wiersze
16 KiB
C
/*
|
|
* Hamlib FlexRadio backend - 6K series rigs
|
|
* Copyright (c) 2002-2009 by Stephane Fillod
|
|
* Copyright (C) 2010,2011,2012,2013 by Nate Bargmann, n0nb@arrl.net
|
|
* Copyright (C) 2013 by Steve Conklin AI4QR, steve@conklinhouse.com
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
* See the file 'COPYING.LIB' in the main Hamlib distribution directory for
|
|
* the complete text of the GNU Lesser Public License version 2.1.
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <hamlib/rig.h>
|
|
#include "kenwood.h"
|
|
#include "bandplan.h"
|
|
#include "flex.h"
|
|
#include "token.h"
|
|
#include "cal.h"
|
|
|
|
#define F6K_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_AM|RIG_MODE_FM|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB)
|
|
|
|
#define F6K_FUNC_ALL (RIG_FUNC_VOX)
|
|
|
|
#define F6K_LEVEL_ALL (RIG_LEVEL_SLOPE_HIGH|RIG_LEVEL_SLOPE_LOW|RIG_LEVEL_KEYSPD)
|
|
|
|
#define F6K_VFO (RIG_VFO_A|RIG_VFO_B)
|
|
#define F6K_VFO_OP (RIG_OP_UP|RIG_OP_DOWN)
|
|
|
|
#define F6K_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
|
|
|
|
|
|
static rmode_t flex_mode_table[KENWOOD_MODE_TABLE_MAX] =
|
|
{
|
|
[0] = RIG_MODE_NONE,
|
|
[1] = RIG_MODE_LSB,
|
|
[2] = RIG_MODE_USB,
|
|
[3] = RIG_MODE_CW,
|
|
[4] = RIG_MODE_FM,
|
|
[5] = RIG_MODE_AM,
|
|
[6] = RIG_MODE_PKTLSB,
|
|
[7] = RIG_MODE_NONE,
|
|
[8] = RIG_MODE_NONE,
|
|
[9] = RIG_MODE_PKTUSB
|
|
};
|
|
|
|
static struct kenwood_priv_caps f6k_priv_caps =
|
|
{
|
|
.cmdtrm = EOM_KEN,
|
|
.mode_table = flex_mode_table,
|
|
};
|
|
|
|
#define DSP_BW_NUM 8
|
|
|
|
static int dsp_bw_ssb[DSP_BW_NUM] =
|
|
{
|
|
4000, 3300, 2900, 2700, 2400, 2100, 1800, 1600
|
|
};
|
|
|
|
static int dsp_bw_am[DSP_BW_NUM] =
|
|
{
|
|
20000, 16000, 14000, 12000, 10000, 8000, 6000, 5600
|
|
};
|
|
|
|
static int dsp_bw_cw[DSP_BW_NUM] =
|
|
{
|
|
3000, 1500, 1000, 800, 400, 250, 100, 50
|
|
};
|
|
|
|
static int dsp_bw_dig[DSP_BW_NUM] =
|
|
{
|
|
3000, 2000, 1500, 1000, 600, 300, 150, 100
|
|
};
|
|
|
|
/* Private helper functions */
|
|
|
|
static int flex6k_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width)
|
|
{
|
|
struct kenwood_priv_caps *caps = kenwood_caps(rig);
|
|
char modebuf[10];
|
|
int index;
|
|
int retval;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
|
|
|
|
if (!mode || !width)
|
|
{
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = kenwood_safe_transaction(rig, "MD", modebuf, 6, 3);
|
|
|
|
if (retval != RIG_OK)
|
|
{
|
|
return retval;
|
|
}
|
|
|
|
*mode = kenwood2rmode(modebuf[2] - '0', caps->mode_table);
|
|
|
|
if ((vfo == RIG_VFO_VFO) || (vfo == RIG_VFO_CURR))
|
|
{
|
|
vfo = rig->state.current_vfo;
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s: setting VFO to current\n", __func__);
|
|
}
|
|
|
|
/*
|
|
* The Flex CAT interface does not support FW for reading filter width,
|
|
* so use the ZZFI or ZZFJ command
|
|
*/
|
|
switch (vfo)
|
|
{
|
|
case RIG_VFO_A:
|
|
retval = kenwood_safe_transaction(rig, "ZZFI", modebuf, 10, 6);
|
|
break;
|
|
|
|
case RIG_VFO_B:
|
|
retval = kenwood_safe_transaction(rig, "ZZFJ", modebuf, 10, 6);
|
|
break;
|
|
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR, "%s: unsupported VFO %s\n", __func__, rig_strvfo(vfo));
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
if (retval != RIG_OK)
|
|
{
|
|
return retval;
|
|
}
|
|
|
|
index = atoi(&modebuf[4]);
|
|
|
|
if (index >= DSP_BW_NUM)
|
|
{
|
|
rig_debug(RIG_DEBUG_ERR,
|
|
"flex6k_get_mode: unexpected ZZF[IJ] answer, index=%d\n", index);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
|
|
switch (*mode)
|
|
{
|
|
case RIG_MODE_AM:
|
|
*width = dsp_bw_am[index];
|
|
break;
|
|
|
|
case RIG_MODE_CW:
|
|
*width = dsp_bw_cw[index];
|
|
break;
|
|
|
|
case RIG_MODE_USB:
|
|
case RIG_MODE_LSB:
|
|
*width = dsp_bw_ssb[index];
|
|
break;
|
|
|
|
//case RIG_MODE_FM:
|
|
//*width = 3000; /* not supported yet, needs followup */
|
|
//break;
|
|
case RIG_MODE_PKTLSB:
|
|
case RIG_MODE_PKTUSB:
|
|
*width = dsp_bw_dig[index];
|
|
break;
|
|
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode %s, setting default BW\n",
|
|
__func__, rig_strrmode(*mode));
|
|
*width = 3000;
|
|
break;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
static int flex6k_find_width(rmode_t mode, pbwidth_t width, int *ridx)
|
|
{
|
|
int *w_a; // Width array, these are all ordered in descending order!
|
|
int idx = 0;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
|
|
|
|
switch (mode)
|
|
{
|
|
case RIG_MODE_AM:
|
|
w_a = dsp_bw_am;
|
|
break;
|
|
|
|
case RIG_MODE_CW:
|
|
w_a = dsp_bw_cw;
|
|
break;
|
|
|
|
case RIG_MODE_USB:
|
|
case RIG_MODE_LSB:
|
|
w_a = dsp_bw_ssb;
|
|
break;
|
|
|
|
//case RIG_MODE_FM:
|
|
//*width = 3000; /* not supported yet, needs followup */
|
|
//break;
|
|
case RIG_MODE_PKTLSB:
|
|
case RIG_MODE_PKTUSB:
|
|
w_a = dsp_bw_dig;
|
|
break;
|
|
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR, "%s: unsupported mode %s\n", __func__,
|
|
rig_strrmode(mode));
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
// return the first smaller or equal possibility
|
|
while ((idx < DSP_BW_NUM) && (w_a[idx] > width))
|
|
{
|
|
idx++;
|
|
}
|
|
|
|
if (idx >= DSP_BW_NUM)
|
|
{
|
|
idx = DSP_BW_NUM - 1;
|
|
}
|
|
|
|
*ridx = idx;
|
|
return RIG_OK;
|
|
}
|
|
|
|
static int flex6k_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width)
|
|
{
|
|
struct kenwood_priv_caps *caps = kenwood_caps(rig);
|
|
char buf[10];
|
|
char kmode;
|
|
int idx;
|
|
int err;
|
|
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s called\n", __func__);
|
|
|
|
kmode = rmode2kenwood(mode, caps->mode_table);
|
|
|
|
if (kmode < 0)
|
|
{
|
|
rig_debug(RIG_DEBUG_WARN, "%s: unsupported mode '%s'\n",
|
|
__func__, rig_strrmode(mode));
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
sprintf(buf, "MD%c", '0' + kmode);
|
|
err = kenwood_transaction(rig, buf, NULL, 0);
|
|
|
|
if (err != RIG_OK)
|
|
{
|
|
return err;
|
|
}
|
|
|
|
if ((vfo == RIG_VFO_VFO) || (vfo == RIG_VFO_CURR))
|
|
{
|
|
vfo = rig->state.current_vfo;
|
|
rig_debug(RIG_DEBUG_VERBOSE, "%s: setting VFO to current\n", __func__);
|
|
}
|
|
|
|
if (RIG_PASSBAND_NOCHANGE == width) { return err; }
|
|
|
|
err = flex6k_find_width(mode, width, &idx);
|
|
|
|
if (err != RIG_OK)
|
|
{
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* The Flex CAT interface does not support FW for reading filter width,
|
|
* so use the ZZFI or ZZFJ command
|
|
*/
|
|
switch (vfo)
|
|
{
|
|
case RIG_VFO_A:
|
|
sprintf(buf, "ZZFI%02d;", idx);
|
|
break;
|
|
|
|
case RIG_VFO_B:
|
|
sprintf(buf, "ZZFJ%02d;", idx);
|
|
break;
|
|
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR, "%s: unsupported VFO %s\n", __func__, rig_strvfo(vfo));
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
err = kenwood_transaction(rig, buf, NULL, 0);
|
|
|
|
if (err != RIG_OK)
|
|
{
|
|
return err;
|
|
}
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* F6K rig capabilities.
|
|
*/
|
|
const struct rig_caps f6k_caps =
|
|
{
|
|
RIG_MODEL(RIG_MODEL_F6K),
|
|
.model_name = "6xxx",
|
|
.mfg_name = "FlexRadio",
|
|
.version = "20130717.0",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_BETA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_NONE,
|
|
.port_type = RIG_PORT_NETWORK,
|
|
// The combination of timeout and retry is important
|
|
// We need at least 3 seconds to do profile switches
|
|
// Hitting the timeout is OK as long as we retry
|
|
// Previous note showed FA/FB may take up to 500ms on band change
|
|
.timeout = 300,
|
|
.retry = 13,
|
|
|
|
.has_get_func = RIG_FUNC_NONE, /* has VOX but not implemented here */
|
|
.has_set_func = RIG_FUNC_NONE,
|
|
.has_get_level = F6K_LEVEL_ALL,
|
|
.has_set_level = F6K_LEVEL_ALL,
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {}, /* FIXME: granularity */
|
|
.parm_gran = {},
|
|
//.extlevels = elecraft_ext_levels,
|
|
//.extparms = kenwood_cfg_params,
|
|
.post_write_delay = 20,
|
|
.preamp = { RIG_DBLST_END, },
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.vfo_ops = RIG_OP_NONE,
|
|
.targetable_vfo = RIG_TARGETABLE_FREQ | RIG_TARGETABLE_MODE,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = { RIG_CHAN_END },
|
|
|
|
.rx_range_list1 = {
|
|
{kHz(30), MHz(77), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
|
|
{MHz(135), MHz(165), F6K_MODES, -1, - 1, F6K_VFO, F6K_ANTS},
|
|
RIG_FRNG_END,
|
|
}, /* rx range */
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_6m(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_2m(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
RIG_FRNG_END,
|
|
}, /* tx range */
|
|
|
|
.rx_range_list2 = {
|
|
{kHz(30), MHz(77), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
|
|
{ MHz(135), MHz(165), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
|
|
RIG_FRNG_END,
|
|
}, /* rx range */
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_6m(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_2m(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
RIG_FRNG_END,
|
|
}, /* tx range */
|
|
|
|
.tuning_steps = {
|
|
{F6K_MODES, 1},
|
|
RIG_TS_END,
|
|
},
|
|
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB, kHz(2.7)},
|
|
{RIG_MODE_SSB, kHz(3.3)},
|
|
{RIG_MODE_SSB, kHz(1.8)},
|
|
{RIG_MODE_SSB, kHz(1.6)},
|
|
{RIG_MODE_SSB, kHz(4.0)},
|
|
{RIG_MODE_SSB, RIG_FLT_ANY},
|
|
{RIG_MODE_CW, kHz(0.4)},
|
|
{RIG_MODE_CW, kHz(1.5)},
|
|
{RIG_MODE_CW, Hz(50)},
|
|
{RIG_MODE_CW, kHz(3.0)},
|
|
{RIG_MODE_CW, RIG_FLT_ANY},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, kHz(1.5)},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, kHz(3.0)},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, kHz(0.1)},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, RIG_FLT_ANY},
|
|
{RIG_MODE_AM, kHz(6)},
|
|
{RIG_MODE_AM, kHz(14)},
|
|
{RIG_MODE_AM, kHz(5.6)},
|
|
{RIG_MODE_AM, kHz(20.0)},
|
|
{RIG_MODE_AM, RIG_FLT_ANY},
|
|
{RIG_MODE_FM, kHz(13)}, /* TBC */
|
|
RIG_FLT_END,
|
|
},
|
|
.priv = (void *)& f6k_priv_caps,
|
|
|
|
.rig_init = kenwood_init,
|
|
.rig_cleanup = kenwood_cleanup,
|
|
.rig_open = flexradio_open,
|
|
.rig_close = kenwood_close,
|
|
.set_freq = kenwood_set_freq,
|
|
.get_freq = kenwood_get_freq,
|
|
.set_mode = flex6k_set_mode,
|
|
.get_mode = flex6k_get_mode,
|
|
.set_vfo = kenwood_set_vfo,
|
|
.get_vfo = kenwood_get_vfo_if,
|
|
.set_split_vfo = kenwood_set_split_vfo,
|
|
.get_split_vfo = kenwood_get_split_vfo_if,
|
|
.get_ptt = kenwood_get_ptt,
|
|
.set_ptt = kenwood_set_ptt,
|
|
// TODO copy over kenwood_[set|get]_level and modify to handle DSP filter values
|
|
// correctly - use actual values instead of indices
|
|
.set_level = kenwood_set_level,
|
|
.get_level = kenwood_get_level,
|
|
//.set_ant = kenwood_set_ant_no_ack,
|
|
//.get_ant = kenwood_get_ant,
|
|
};
|
|
|
|
/*
|
|
* PowerSDR rig capabilities.
|
|
*/
|
|
const struct rig_caps powersdr_caps =
|
|
{
|
|
RIG_MODEL(RIG_MODEL_POWERSDR),
|
|
.model_name = "PowerSDR",
|
|
.mfg_name = "FlexRadio",
|
|
.version = "20200528.0",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_BETA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_NONE,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 1200,
|
|
.serial_rate_max = 57600,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0, /* ms */
|
|
// The combination of timeout and retry is important
|
|
// We need at least 3 seconds to do profile switches
|
|
// Hitting the timeout is OK as long as we retry
|
|
// Previous note showed FA/FB may take up to 500ms on band change
|
|
.timeout = 200,
|
|
.retry = 3,
|
|
|
|
.has_get_func = RIG_FUNC_NONE, /* has VOX but not implemented here */
|
|
.has_set_func = RIG_FUNC_NONE,
|
|
.has_get_level = F6K_LEVEL_ALL,
|
|
.has_set_level = F6K_LEVEL_ALL,
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {}, /* FIXME: granularity */
|
|
.parm_gran = {},
|
|
//.extlevels = elecraft_ext_levels,
|
|
//.extparms = kenwood_cfg_params,
|
|
.post_write_delay = 20,
|
|
.preamp = { RIG_DBLST_END, },
|
|
.attenuator = { RIG_DBLST_END, },
|
|
.max_rit = Hz(0),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.vfo_ops = RIG_OP_NONE,
|
|
.targetable_vfo = RIG_TARGETABLE_FREQ | RIG_TARGETABLE_MODE,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = { RIG_CHAN_END },
|
|
|
|
.rx_range_list1 = {
|
|
{kHz(30), MHz(77), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
|
|
{MHz(135), MHz(165), F6K_MODES, -1, - 1, F6K_VFO, F6K_ANTS},
|
|
RIG_FRNG_END,
|
|
}, /* rx range */
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_6m(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_2m(1, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
RIG_FRNG_END,
|
|
}, /* tx range */
|
|
|
|
.rx_range_list2 = {
|
|
{kHz(30), MHz(77), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
|
|
{ MHz(135), MHz(165), F6K_MODES, -1, -1, F6K_VFO, F6K_ANTS},
|
|
RIG_FRNG_END,
|
|
}, /* rx range */
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_6m(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
FRQ_RNG_2m(2, F6K_MODES, mW(10), W(100), F6K_VFO, F6K_ANTS),
|
|
RIG_FRNG_END,
|
|
}, /* tx range */
|
|
|
|
.tuning_steps = {
|
|
{F6K_MODES, 1},
|
|
RIG_TS_END,
|
|
},
|
|
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB, kHz(2.7)},
|
|
{RIG_MODE_SSB, kHz(3.3)},
|
|
{RIG_MODE_SSB, kHz(1.8)},
|
|
{RIG_MODE_SSB, kHz(1.6)},
|
|
{RIG_MODE_SSB, kHz(4.0)},
|
|
{RIG_MODE_SSB, RIG_FLT_ANY},
|
|
{RIG_MODE_CW, kHz(0.4)},
|
|
{RIG_MODE_CW, kHz(1.5)},
|
|
{RIG_MODE_CW, Hz(50)},
|
|
{RIG_MODE_CW, kHz(3.0)},
|
|
{RIG_MODE_CW, RIG_FLT_ANY},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, kHz(1.5)},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, kHz(3.0)},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, kHz(0.1)},
|
|
{RIG_MODE_PKTUSB | RIG_MODE_PKTLSB, RIG_FLT_ANY},
|
|
{RIG_MODE_AM, kHz(6)},
|
|
{RIG_MODE_AM, kHz(14)},
|
|
{RIG_MODE_AM, kHz(5.6)},
|
|
{RIG_MODE_AM, kHz(20.0)},
|
|
{RIG_MODE_AM, RIG_FLT_ANY},
|
|
{RIG_MODE_FM, kHz(13)}, /* TBC */
|
|
RIG_FLT_END,
|
|
},
|
|
.priv = (void *)& f6k_priv_caps,
|
|
|
|
.rig_init = kenwood_init,
|
|
.rig_cleanup = kenwood_cleanup,
|
|
.rig_open = flexradio_open,
|
|
.rig_close = kenwood_close,
|
|
.set_freq = kenwood_set_freq,
|
|
.get_freq = kenwood_get_freq,
|
|
.set_mode = flex6k_set_mode,
|
|
.get_mode = flex6k_get_mode,
|
|
.set_vfo = kenwood_set_vfo,
|
|
.get_vfo = kenwood_get_vfo_if,
|
|
.set_split_vfo = kenwood_set_split_vfo,
|
|
.get_split_vfo = kenwood_get_split_vfo_if,
|
|
.get_ptt = kenwood_get_ptt,
|
|
.set_ptt = kenwood_set_ptt,
|
|
// TODO copy over kenwood_[set|get]_level and modify to handle DSP filter values
|
|
// correctly - use actual values instead of indices
|
|
.set_level = kenwood_set_level,
|
|
.get_level = kenwood_get_level,
|
|
//.set_ant = kenwood_set_ant_no_ack,
|
|
//.get_ant = kenwood_get_ant,
|
|
};
|