kopia lustrzana https://github.com/Hamlib/Hamlib
928 wiersze
27 KiB
C
928 wiersze
27 KiB
C
/*
|
|
* Hamlib CI-V backend - description of IC-756 and variations
|
|
* Copyright (c) 2000-2010 by Stephane Fillod
|
|
*
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*
|
|
*/
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
#include "config.h"
|
|
#endif
|
|
|
|
#include <stdlib.h>
|
|
#include <string.h> /* String function definitions */
|
|
|
|
#include <hamlib/rig.h>
|
|
#include "token.h"
|
|
#include "idx_builtin.h"
|
|
|
|
#include "icom.h"
|
|
#include "icom_defs.h"
|
|
#include "frame.h"
|
|
#include "misc.h"
|
|
#include "bandplan.h"
|
|
|
|
|
|
#define IC756_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
|
|
#define IC756_1HZ_TS_MODES IC756_ALL_RX_MODES
|
|
|
|
/*
|
|
* 100W in all modes but AM (40W)
|
|
*/
|
|
#define IC756_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM)
|
|
#define IC756_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
#define IC756PRO_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_RF)
|
|
|
|
#define IC756PRO_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|RIG_LEVEL_COMP|RIG_LEVEL_BALANCE)
|
|
|
|
/* Note that RIG_LEVEL_VOXGAIN and RIG_LEVEL_ANTIVOX are incorrectly handled in icom.c for
|
|
* this model.
|
|
*/
|
|
|
|
#define IC756_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
|
|
|
|
#define IC756_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
|
|
#define IC756_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO)
|
|
|
|
#define IC756_ANTS (RIG_ANT_1|RIG_ANT_2)
|
|
|
|
#define IC756PRO_STR_CAL { 16, \
|
|
{ \
|
|
{ 0, -18 }, \
|
|
{ 10, -16 }, \
|
|
{ 27, -14 }, \
|
|
{ 45, -12 }, \
|
|
{ 60, -10 }, \
|
|
{ 76, -8 }, \
|
|
{ 89, -6 }, \
|
|
{ 100, -4 }, \
|
|
{ 110, -2 }, \
|
|
{ 120, 0 }, \
|
|
{ 125, 2 }, \
|
|
{ 129, 4 }, \
|
|
{ 133, 6 }, \
|
|
{ 138, 8 }, \
|
|
{ 142, 10 }, \
|
|
{ 146, 12 } \
|
|
} }
|
|
|
|
/*
|
|
* ic756 rig capabilities.
|
|
*/
|
|
static const struct icom_priv_caps ic756_priv_caps = {
|
|
0x50, /* default address */
|
|
0, /* 731 mode */
|
|
ic756_ts_sc_list
|
|
};
|
|
|
|
const struct rig_caps ic756_caps = {
|
|
.rig_model = RIG_MODEL_IC756,
|
|
.model_name = "IC-756",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER,
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_ALPHA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_NONE,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 200,
|
|
.retry = 3,
|
|
.has_get_func = IC756PRO_FUNC_ALL,
|
|
.has_set_func = IC756PRO_FUNC_ALL,
|
|
.has_get_level = IC756PRO_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = NULL,
|
|
.preamp = { 10, RIG_DBLST_END, }, /* FIXME: TBC */
|
|
.attenuator = { 20, RIG_DBLST_END, },
|
|
.max_rit = Hz(9999),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC756_VFO_OPS,
|
|
.scan_ops = IC756_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM },
|
|
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{IC756_1HZ_TS_MODES,1},
|
|
{IC756_ALL_RX_MODES,kHz(1)},
|
|
{IC756_ALL_RX_MODES,kHz(5)},
|
|
{IC756_ALL_RX_MODES,kHz(9)},
|
|
{IC756_ALL_RX_MODES,kHz(10)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)},
|
|
{RIG_MODE_CW, Hz(500)},
|
|
{RIG_MODE_AM, kHz(8)},
|
|
{RIG_MODE_AM, kHz(2.4)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(8)},
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = IC756PRO_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic756_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_rptr_shift = icom_set_rptr_shift,
|
|
.get_rptr_shift = icom_get_rptr_shift,
|
|
.set_rptr_offs = icom_set_rptr_offs,
|
|
.get_rptr_offs = icom_get_rptr_offs,
|
|
.set_split_freq = icom_set_split_freq,
|
|
.get_split_freq = icom_get_split_freq,
|
|
.set_split_mode = icom_set_split_mode,
|
|
.get_split_mode = icom_get_split_mode,
|
|
.set_split_vfo = icom_set_split_vfo,
|
|
.get_split_vfo = icom_mem_get_split_vfo,
|
|
|
|
};
|
|
|
|
|
|
/*
|
|
* ic756pro rig capabilities.
|
|
* TODO: check every paramters,
|
|
* add antenna capabilities
|
|
*/
|
|
static const struct icom_priv_caps ic756pro_priv_caps = {
|
|
0x5c, /* default address */
|
|
0, /* 731 mode */
|
|
ic756pro_ts_sc_list
|
|
};
|
|
|
|
const struct rig_caps ic756pro_caps = {
|
|
.rig_model = RIG_MODEL_IC756PRO,
|
|
.model_name = "IC-756PRO",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER,
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_UNTESTED,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 200,
|
|
.retry = 3,
|
|
.has_get_func = IC756PRO_FUNC_ALL,
|
|
.has_set_func = IC756PRO_FUNC_ALL,
|
|
.has_get_level = IC756PRO_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = NULL,
|
|
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
|
|
.attenuator = { 6, 12, 18, 20, RIG_DBLST_END, },
|
|
.max_rit = Hz(9999),
|
|
.max_xit = Hz(0),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC756_VFO_OPS,
|
|
.scan_ops = IC756_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM },
|
|
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{IC756_1HZ_TS_MODES,1},
|
|
{IC756_ALL_RX_MODES,kHz(1)},
|
|
{IC756_ALL_RX_MODES,kHz(5)},
|
|
{IC756_ALL_RX_MODES,kHz(9)},
|
|
{IC756_ALL_RX_MODES,kHz(10)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)},
|
|
{RIG_MODE_CW, Hz(500)},
|
|
{RIG_MODE_AM, kHz(8)},
|
|
{RIG_MODE_AM, kHz(2.4)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(8)},
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = IC756PRO_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic756pro_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ptt = icom_set_ptt,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_rptr_shift = icom_set_rptr_shift,
|
|
.get_rptr_shift = icom_get_rptr_shift,
|
|
.set_rptr_offs = icom_set_rptr_offs,
|
|
.get_rptr_offs = icom_get_rptr_offs,
|
|
.set_ctcss_tone = icom_set_ctcss_tone,
|
|
.get_ctcss_tone = icom_get_ctcss_tone,
|
|
.set_ctcss_sql = icom_set_ctcss_sql,
|
|
.get_ctcss_sql = icom_get_ctcss_sql,
|
|
.set_split_freq = icom_set_split_freq,
|
|
.get_split_freq = icom_get_split_freq,
|
|
.set_split_mode = icom_set_split_mode,
|
|
.get_split_mode = icom_get_split_mode,
|
|
.set_split_vfo = icom_set_split_vfo,
|
|
.get_split_vfo = icom_mem_get_split_vfo,
|
|
|
|
};
|
|
|
|
/*
|
|
* ic756proII rig capabilities.
|
|
* TODO: check every paramters,
|
|
* add antenna capabilities
|
|
*/
|
|
static const struct icom_priv_caps ic756pro2_priv_caps = {
|
|
0x64, /* default address */
|
|
0, /* 731 mode */
|
|
ic756pro_ts_sc_list
|
|
};
|
|
|
|
/*
|
|
* These TOKEN_BACKEND's are on a different name space than conf's
|
|
*/
|
|
#define TOK_MEMNAME TOKEN_BACKEND(1)
|
|
#define TOK_MYCALL TOKEN_BACKEND(2)
|
|
|
|
static const struct confparams ic756pro2_ext_parms[] = {
|
|
{ TOK_SSBBASS, "ssbbass", "SSB Tx Tone (Bass)", "SSB Tx Tone (Bass)",
|
|
NULL, RIG_CONF_NUMERIC, { .n = { 0, 10, 1 } }
|
|
},
|
|
{ TOK_MEMNAME, "showmem", "Show mem name", "Show memory name",
|
|
NULL, RIG_CONF_CHECKBUTTON, { }
|
|
},
|
|
{ TOK_SQLCTRL, "sqlctrl", "RF/Sql control", "set RF/Squelch control",
|
|
NULL, RIG_CONF_COMBO, { .c = {{ "Auto", "Sql", "RF+Sql", NULL }} }
|
|
},
|
|
{ TOK_MYCALL, "mycall", "Callsign", "My call sign",
|
|
NULL, RIG_CONF_STRING, { }
|
|
},
|
|
{ TOK_RTTY_FLTR, "rttyfltr", "RTTY Fltr Width preset", "Set/Read RTTY preset filter width",
|
|
"350", RIG_CONF_COMBO, { .c = {{"250", "300", "350", "500", "1000", NULL }} }
|
|
},
|
|
{ RIG_CONF_END, NULL, }
|
|
};
|
|
|
|
|
|
/*
|
|
* NUMERIC: val.f
|
|
* COMBO: val.i, starting from 0
|
|
* STRING: val.cs for set, val.s for get
|
|
* CHECKBUTTON: val.i 0/1
|
|
*/
|
|
|
|
/*IC-756Pro Rig parameters Only available in this namespace*/
|
|
#define S_MEM_SC_LEN 2 /* 756PRO S_MEM subcmd length */
|
|
#define S_MEM_SBASS 0x501 /* SSB TX tone bass level */
|
|
#define S_MEM_NAME 0x514 /* send/read memory name */
|
|
#define S_MEM_MYCALL 0x515
|
|
#define S_MEM_BEEP 0x520 /* Button confirmation */
|
|
#define S_MEM_SQL_CTL 0x522 /* RF/SQL ctl set 0=auto; 1 = sql; 2 = RF+SQL */
|
|
#define S_MEM_QSPLT 0x524 /* enable quick split mode */
|
|
#define S_MEM_TRCV 0x532 /* CI-V trancieve mode */
|
|
#define S_MEM_LANG 0x536 /* 0=English 1=Japanese for voice announcer */
|
|
#define S_MEM_SCN_SPD 0x556 /* 0 = low; 1 = high */
|
|
#define S_MEM_RTTY_FL_PB 0x561 /* 0=250 Hz, 1=300' 2 = 350, 3 = 500, 4 = 1 KHz */
|
|
#define S_MEM_RTTY_TWNPK 0x562 /* rtty twin peak filter off/on */
|
|
|
|
|
|
static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val);
|
|
static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val);
|
|
|
|
#define IC756PROII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
|
|
#define IC756PROII_1HZ_TS_MODES IC756PROII_ALL_RX_MODES
|
|
#define IC756PROII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
|
|
#define IC756PROII_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
|
|
const struct rig_caps ic756pro2_caps = {
|
|
.rig_model = RIG_MODEL_IC756PROII,
|
|
.model_name = "IC-756PROII",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER,
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_ALPHA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 200,
|
|
.retry = 3,
|
|
.has_get_func = IC756PRO_FUNC_ALL,
|
|
.has_set_func = IC756PRO_FUNC_ALL,
|
|
.has_get_level = IC756PRO_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
|
|
.has_get_parm = RIG_PARM_NONE,
|
|
.has_set_parm = RIG_PARM_NONE, /* FIXME: parms */
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.extparms = ic756pro2_ext_parms,
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = NULL,
|
|
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */
|
|
.attenuator = { 6, 12, 18, 20, RIG_DBLST_END, },
|
|
.max_rit = Hz(9999),
|
|
.max_xit = Hz(9999),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC756_VFO_OPS,
|
|
.scan_ops = IC756_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 0,
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM },
|
|
{ 100, 101, RIG_MTYPE_EDGE }, /* two by two */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = { {kHz(30),MHz(60),IC756PROII_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(1,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(1,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(1,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = { {kHz(30),MHz(60),IC756PROII_ALL_RX_MODES,-1,-1,IC756_VFO_ALL},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(2,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(2,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(2,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{IC756PROII_1HZ_TS_MODES,1},
|
|
{IC756PROII_ALL_RX_MODES,kHz(1)},
|
|
{IC756PROII_ALL_RX_MODES,kHz(5)},
|
|
{IC756PROII_ALL_RX_MODES,kHz(9)},
|
|
{IC756PROII_ALL_RX_MODES,kHz(10)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)},
|
|
{RIG_MODE_CW, Hz(500)},
|
|
{RIG_MODE_AM, kHz(6)},
|
|
{RIG_MODE_AM, kHz(2.4)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(8)},
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = IC756PRO_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic756pro2_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ptt = icom_set_ptt,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_rptr_shift = icom_set_rptr_shift,
|
|
.get_rptr_shift = icom_get_rptr_shift,
|
|
.set_rptr_offs = icom_set_rptr_offs,
|
|
.get_rptr_offs = icom_get_rptr_offs,
|
|
.set_ctcss_tone = icom_set_ctcss_tone,
|
|
.get_ctcss_tone = icom_get_ctcss_tone,
|
|
.set_ctcss_sql = icom_set_ctcss_sql,
|
|
.get_ctcss_sql = icom_get_ctcss_sql,
|
|
.set_split_freq = icom_set_split_freq,
|
|
.get_split_freq = icom_get_split_freq,
|
|
.set_split_mode = icom_set_split_mode,
|
|
.get_split_mode = icom_get_split_mode,
|
|
.set_split_vfo = icom_set_split_vfo,
|
|
.get_split_vfo = icom_mem_get_split_vfo,
|
|
|
|
.set_ext_parm = ic756pro2_set_ext_parm,
|
|
.get_ext_parm = ic756pro2_get_ext_parm,
|
|
};
|
|
|
|
|
|
/*
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
*/
|
|
static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
unsigned char epbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN];
|
|
int ack_len, ep_len, val_len;
|
|
int ep_cmd = C_CTL_MEM;
|
|
int ep_sc; /* Subcommand in $1A $05xx */
|
|
int icom_val = 0;
|
|
int retval;
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
ep_len = 0; /* 0 implies BCD data */
|
|
val_len = 1;
|
|
|
|
switch(token) {
|
|
case TOK_SSBBASS:
|
|
ep_sc = S_MEM_SBASS ;
|
|
icom_val = val.f;
|
|
break;
|
|
case TOK_MEMNAME:
|
|
ep_sc = S_MEM_NAME;
|
|
icom_val = val.i ? 1 : 0;
|
|
break;
|
|
case TOK_SQLCTRL:
|
|
ep_sc = S_MEM_SQL_CTL;
|
|
/* TODO: check range this actually doesn't decode the input type 'string' */
|
|
icom_val = val.i;
|
|
break;
|
|
case TOK_MYCALL: /* max 10 ASCII char */
|
|
ep_len = strlen(val.cs);
|
|
if (ep_len > 10)
|
|
return -RIG_EINVAL;
|
|
ep_sc = S_MEM_MYCALL;
|
|
memcpy(epbuf, val.cs, ep_len);
|
|
break;
|
|
case TOK_RTTY_FLTR: /* RTTY filter mode 0 - 4 = 250, 300, 350, 500, 1000 */
|
|
if (val.i < 0 || val.i > 4) return -RIG_EINVAL;
|
|
ep_sc = S_MEM_RTTY_FL_PB;
|
|
icom_val = val.i;
|
|
break;
|
|
default:
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
if (ep_len == 0) {
|
|
to_bcd_be(epbuf, (long long)icom_val, val_len*2);
|
|
ep_len += val_len;
|
|
}
|
|
|
|
retval = icom_transaction (rig, ep_cmd, ep_sc, epbuf, ep_len,
|
|
ackbuf, &ack_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
if (ack_len != 1 || ackbuf[0] != ACK) {
|
|
rig_debug(RIG_DEBUG_ERR, "%s: ack NG (%#.2x), "
|
|
"len=%d\n", __FUNCTION__, ackbuf[0], ack_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
return RIG_OK;
|
|
}
|
|
|
|
/*
|
|
* Assumes rig!=NULL, rig->state.priv!=NULL
|
|
* and val points to a buffer big enough to hold the conf value.
|
|
*/
|
|
static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val)
|
|
{
|
|
struct icom_priv_data *priv;
|
|
struct rig_state *rs;
|
|
const struct confparams *cfp;
|
|
|
|
unsigned char resbuf[MAXFRAMELEN];
|
|
int res_len, icom_val=0;
|
|
int cmdhead;
|
|
int retval;
|
|
|
|
int ep_cmd = C_CTL_MEM;
|
|
int ep_sc; /* Subcommand in $1A $05xx */
|
|
|
|
rs = &rig->state;
|
|
priv = (struct icom_priv_data*)rs->priv;
|
|
|
|
switch(token) {
|
|
case TOK_SSBBASS:
|
|
ep_sc = S_MEM_SBASS ;
|
|
break;
|
|
case TOK_MEMNAME:
|
|
ep_sc = S_MEM_NAME;
|
|
break;
|
|
case TOK_SQLCTRL:
|
|
ep_sc = S_MEM_SQL_CTL;
|
|
break;
|
|
case TOK_MYCALL: /* max 10 ASCII char */
|
|
ep_sc = S_MEM_MYCALL;
|
|
break;
|
|
case TOK_RTTY_FLTR: /* RTTY filter mode 0 - 4 */
|
|
ep_sc = S_MEM_RTTY_FL_PB;
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"Unsupported get_ext_parm %d", token);
|
|
return -RIG_EINVAL;
|
|
}
|
|
|
|
retval = icom_transaction (rig, ep_cmd, ep_sc, NULL, 0,
|
|
resbuf, &res_len);
|
|
if (retval != RIG_OK)
|
|
return retval;
|
|
|
|
/*
|
|
* strbuf should contain Cn,Sc,Data area
|
|
*/
|
|
cmdhead = (ep_sc == -1) ? 1:S_MEM_SC_LEN + 1;
|
|
res_len -= cmdhead;
|
|
/* should echo cmd, subcmd and then data, if you get an ack something is wrong */
|
|
if (resbuf[0] != ep_cmd) {
|
|
if (resbuf[0] == ACK) {
|
|
rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
|
|
"len=%d\n", __FUNCTION__,resbuf[0],res_len);
|
|
return -RIG_EPROTO;
|
|
}
|
|
else {
|
|
rig_debug(RIG_DEBUG_ERR,"%s: ack NG (%#.2x), "
|
|
"len=%d\n", __FUNCTION__,resbuf[0],res_len);
|
|
return -RIG_ERJCTED;
|
|
}
|
|
}
|
|
cfp = rig_ext_lookup_tok(rig, token);
|
|
switch(cfp->type) {
|
|
case RIG_CONF_STRING:
|
|
memcpy(val->s, resbuf, res_len);
|
|
break;
|
|
case RIG_CONF_CHECKBUTTON:
|
|
case RIG_CONF_COMBO:
|
|
val->i = from_bcd_be(resbuf+cmdhead, res_len*2);
|
|
break;
|
|
case RIG_CONF_NUMERIC:
|
|
val->f = from_bcd_be(resbuf+cmdhead, res_len*2);
|
|
break;
|
|
default:
|
|
rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), "
|
|
"len=%d\n", __FUNCTION__,resbuf[0],res_len);
|
|
return -RIG_EPROTO;
|
|
|
|
}
|
|
rig_debug(RIG_DEBUG_TRACE,"%s: %d %d %d %f\n",
|
|
__FUNCTION__, res_len, icom_val, val->i, val->f);
|
|
|
|
return RIG_OK;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* ic756proIII rig capabilities.
|
|
*
|
|
* TODO: check every paramters,
|
|
* add antenna capabilities
|
|
*/
|
|
static const struct icom_priv_caps ic756pro3_priv_caps = {
|
|
0x6e, /* default address */
|
|
0, /* 731 mode */
|
|
ic756pro_ts_sc_list
|
|
};
|
|
|
|
|
|
#define IC756PROIII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
|
|
#define IC756PROIII_1HZ_TS_MODES IC756PROIII_ALL_RX_MODES
|
|
#define IC756PROIII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM)
|
|
#define IC756PROIII_AM_TX_MODES (RIG_MODE_AM)
|
|
|
|
#define IC756PROIII_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM)
|
|
|
|
#define IC756PROIII_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT|RIG_PARM_APO|RIG_PARM_TIME|RIG_PARM_BEEP)
|
|
|
|
|
|
/*
|
|
* TODO: check whether all func and levels are stored in memory
|
|
*
|
|
* No memory split support.
|
|
* .rptr_offs = 1, to be done for FM special mode
|
|
*
|
|
* Channel description should be possible through: 0x1a 0x00
|
|
* c.f. http://www.plicht.de/ekki/civ/civ-p4305-756pro.html
|
|
*/
|
|
#define IC756PROIII_MEM_CAP { \
|
|
.ant = 1, \
|
|
.tuning_step = 1, \
|
|
.freq = 1, \
|
|
.mode = 1, \
|
|
.width = 1, \
|
|
.ctcss_tone = 1, \
|
|
.ctcss_sql = 1, \
|
|
.funcs = IC756PRO_FUNC_ALL, \
|
|
.levels = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), \
|
|
}
|
|
|
|
const struct rig_caps ic756pro3_caps = {
|
|
.rig_model = RIG_MODEL_IC756PROIII,
|
|
.model_name = "IC-756PROIII",
|
|
.mfg_name = "Icom",
|
|
.version = BACKEND_VER ".1",
|
|
.copyright = "LGPL",
|
|
.status = RIG_STATUS_BETA,
|
|
.rig_type = RIG_TYPE_TRANSCEIVER,
|
|
.ptt_type = RIG_PTT_RIG,
|
|
.dcd_type = RIG_DCD_RIG,
|
|
.port_type = RIG_PORT_SERIAL,
|
|
.serial_rate_min = 300,
|
|
.serial_rate_max = 19200,
|
|
.serial_data_bits = 8,
|
|
.serial_stop_bits = 1,
|
|
.serial_parity = RIG_PARITY_NONE,
|
|
.serial_handshake = RIG_HANDSHAKE_NONE,
|
|
.write_delay = 0,
|
|
.post_write_delay = 0,
|
|
.timeout = 200,
|
|
.retry = 3,
|
|
.has_get_func = IC756PRO_FUNC_ALL,
|
|
.has_set_func = IC756PRO_FUNC_ALL,
|
|
.has_get_level = IC756PRO_LEVEL_ALL,
|
|
.has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL),
|
|
.has_get_parm = IC756PROIII_PARMS,
|
|
.has_set_parm = RIG_PARM_SET(IC756PROIII_PARMS),
|
|
.level_gran = {
|
|
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
|
|
},
|
|
.parm_gran = {},
|
|
.extparms = ic756pro2_ext_parms,
|
|
.ctcss_list = common_ctcss_list,
|
|
.dcs_list = NULL,
|
|
.preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC values */
|
|
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
|
|
.max_rit = Hz(9999),
|
|
.max_xit = Hz(9999),
|
|
.max_ifshift = Hz(0),
|
|
.targetable_vfo = 0,
|
|
.vfo_ops = IC756_VFO_OPS|RIG_OP_TUNE,
|
|
.scan_ops = IC756_SCAN_OPS,
|
|
.transceive = RIG_TRN_RIG,
|
|
.bank_qty = 0,
|
|
.chan_desc_sz = 10, /* TODO */
|
|
|
|
.chan_list = {
|
|
{ 1, 99, RIG_MTYPE_MEM, IC756PROIII_MEM_CAP },
|
|
{ 100, 101, RIG_MTYPE_EDGE, IC756PROIII_MEM_CAP }, /* two by two */
|
|
RIG_CHAN_END,
|
|
},
|
|
|
|
.rx_range_list1 = { {kHz(30),MHz(60),IC756PROIII_ALL_RX_MODES,-1,-1,IC756PROIII_VFO_ALL,IC756_ANTS},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list1 = {
|
|
FRQ_RNG_HF(1,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(1,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(1,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(1,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.rx_range_list2 = { {kHz(30),MHz(60),IC756PROIII_ALL_RX_MODES,-1,-1,IC756PROIII_VFO_ALL,IC756_ANTS},
|
|
RIG_FRNG_END, },
|
|
.tx_range_list2 = {
|
|
FRQ_RNG_HF(2,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_6m(2,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS),
|
|
FRQ_RNG_HF(2,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */
|
|
FRQ_RNG_6m(2,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */
|
|
RIG_FRNG_END, },
|
|
|
|
.tuning_steps = {
|
|
{IC756PROIII_1HZ_TS_MODES,1},
|
|
{IC756PROIII_1HZ_TS_MODES,100},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(1)},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(5)},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(9)},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(10)},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(12.5)},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(20)},
|
|
{IC756PROIII_ALL_RX_MODES,kHz(25)},
|
|
RIG_TS_END,
|
|
},
|
|
/* mode/filter list, remember: order matters! */
|
|
.filters = {
|
|
{RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)},
|
|
{RIG_MODE_CW|RIG_MODE_CWR, Hz(500)},
|
|
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(3.6)}, /* wide */
|
|
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(50)}, /* narrow */
|
|
{RIG_MODE_AM, kHz(6)},
|
|
{RIG_MODE_AM, kHz(2.4)},
|
|
{RIG_MODE_FM, kHz(15)},
|
|
{RIG_MODE_FM, kHz(8)},
|
|
{RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, RIG_FLT_ANY}, /* almost any filter */
|
|
RIG_FLT_END,
|
|
},
|
|
.str_cal = IC756PRO_STR_CAL,
|
|
|
|
.cfgparams = icom_cfg_params,
|
|
.set_conf = icom_set_conf,
|
|
.get_conf = icom_get_conf,
|
|
|
|
.priv = (void*)&ic756pro3_priv_caps,
|
|
.rig_init = icom_init,
|
|
.rig_cleanup = icom_cleanup,
|
|
.rig_open = NULL,
|
|
.rig_close = NULL,
|
|
|
|
.set_freq = icom_set_freq,
|
|
.get_freq = icom_get_freq,
|
|
.set_mode = icom_set_mode,
|
|
.get_mode = icom_get_mode,
|
|
.set_vfo = icom_set_vfo,
|
|
.set_ant = icom_set_ant,
|
|
.get_ant = icom_get_ant,
|
|
|
|
.decode_event = icom_decode_event,
|
|
.set_parm = icom_set_parm,
|
|
.get_parm = icom_get_parm,
|
|
.set_level = icom_set_level,
|
|
.get_level = icom_get_level,
|
|
.set_func = icom_set_func,
|
|
.get_func = icom_get_func,
|
|
.set_mem = icom_set_mem,
|
|
.vfo_op = icom_vfo_op,
|
|
.scan = icom_scan,
|
|
.set_ptt = icom_set_ptt,
|
|
.get_dcd = icom_get_dcd,
|
|
.set_ts = icom_set_ts,
|
|
.get_ts = icom_get_ts,
|
|
.set_ctcss_tone = icom_set_ctcss_tone,
|
|
.get_ctcss_tone = icom_get_ctcss_tone,
|
|
.set_ctcss_sql = icom_set_ctcss_sql,
|
|
.get_ctcss_sql = icom_get_ctcss_sql,
|
|
.set_split_freq = icom_set_split_freq,
|
|
.get_split_freq = icom_get_split_freq,
|
|
.set_split_mode = icom_set_split_mode,
|
|
.get_split_mode = icom_get_split_mode,
|
|
.set_split_vfo = icom_set_split_vfo,
|
|
.get_split_vfo = icom_mem_get_split_vfo,
|
|
|
|
.set_ext_parm = ic756pro2_set_ext_parm,
|
|
.get_ext_parm = ic756pro2_get_ext_parm,
|
|
};
|
|
|
|
|