/* * Hamlib CI-V backend - description of IC-756 and variations * Copyright (c) 2000-2010 by Stephane Fillod * * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include #include /* String function definitions */ #include #include "token.h" #include "idx_builtin.h" #include "icom.h" #include "icom_defs.h" #include "frame.h" #include "misc.h" #include "bandplan.h" #define IC756_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM) #define IC756_1HZ_TS_MODES IC756_ALL_RX_MODES /* * 100W in all modes but AM (40W) */ #define IC756_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_FM) #define IC756_AM_TX_MODES (RIG_MODE_AM) #define IC756PRO_FUNC_ALL (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_COMP|RIG_FUNC_VOX|RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_SBKIN|RIG_FUNC_FBKIN|RIG_FUNC_NR|RIG_FUNC_MON|RIG_FUNC_MN|RIG_FUNC_RF) #define IC756PRO_LEVEL_ALL (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_COMP|RIG_LEVEL_BKINDL|RIG_LEVEL_BALANCE|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_RFPOWER|RIG_LEVEL_MICGAIN|RIG_LEVEL_KEYSPD|RIG_LEVEL_NOTCHF|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_SQL|RIG_LEVEL_COMP|RIG_LEVEL_BALANCE) /* Note that RIG_LEVEL_VOXGAIN and RIG_LEVEL_ANTIVOX are incorrectly handled in icom.c for * this model. */ #define IC756_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM) #define IC756_VFO_OPS (RIG_OP_CPY|RIG_OP_XCHG|RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL) #define IC756_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_PROG|RIG_SCAN_DELTA|RIG_SCAN_PRIO) #define IC756_ANTS (RIG_ANT_1|RIG_ANT_2) #define IC756PRO_STR_CAL { 16, \ { \ { 0, -18 }, \ { 10, -16 }, \ { 27, -14 }, \ { 45, -12 }, \ { 60, -10 }, \ { 76, -8 }, \ { 89, -6 }, \ { 100, -4 }, \ { 110, -2 }, \ { 120, 0 }, \ { 125, 2 }, \ { 129, 4 }, \ { 133, 6 }, \ { 138, 8 }, \ { 142, 10 }, \ { 146, 12 } \ } } /* * ic756 rig capabilities. */ static const struct icom_priv_caps ic756_priv_caps = { 0x50, /* default address */ 0, /* 731 mode */ ic756_ts_sc_list }; const struct rig_caps ic756_caps = { .rig_model = RIG_MODEL_IC756, .model_name = "IC-756", .mfg_name = "Icom", .version = BACKEND_VER, .copyright = "LGPL", .status = RIG_STATUS_ALPHA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_NONE, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 200, .retry = 3, .has_get_func = IC756PRO_FUNC_ALL, .has_set_func = IC756PRO_FUNC_ALL, .has_get_level = IC756PRO_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, /* FIXME: parms */ .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 10, RIG_DBLST_END, }, /* FIXME: TBC */ .attenuator = { 20, RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC756_VFO_OPS, .scan_ops = IC756_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 99, RIG_MTYPE_MEM }, { 100, 101, RIG_MTYPE_EDGE }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .tuning_steps = { {IC756_1HZ_TS_MODES,1}, {IC756_ALL_RX_MODES,kHz(1)}, {IC756_ALL_RX_MODES,kHz(5)}, {IC756_ALL_RX_MODES,kHz(9)}, {IC756_ALL_RX_MODES,kHz(10)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)}, {RIG_MODE_CW, Hz(500)}, {RIG_MODE_AM, kHz(8)}, {RIG_MODE_AM, kHz(2.4)}, {RIG_MODE_FM, kHz(15)}, {RIG_MODE_FM, kHz(8)}, RIG_FLT_END, }, .str_cal = IC756PRO_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void*)&ic756_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = NULL, .rig_close = NULL, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .decode_event = icom_decode_event, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .get_dcd = icom_get_dcd, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_mem_get_split_vfo, }; /* * ic756pro rig capabilities. * TODO: check every paramters, * add antenna capabilities */ static const struct icom_priv_caps ic756pro_priv_caps = { 0x5c, /* default address */ 0, /* 731 mode */ ic756pro_ts_sc_list }; const struct rig_caps ic756pro_caps = { .rig_model = RIG_MODEL_IC756PRO, .model_name = "IC-756PRO", .mfg_name = "Icom", .version = BACKEND_VER, .copyright = "LGPL", .status = RIG_STATUS_UNTESTED, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 200, .retry = 3, .has_get_func = IC756PRO_FUNC_ALL, .has_set_func = IC756PRO_FUNC_ALL, .has_get_level = IC756PRO_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, /* FIXME: parms */ .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */ .attenuator = { 6, 12, 18, 20, RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(0), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC756_VFO_OPS, .scan_ops = IC756_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 99, RIG_MTYPE_MEM }, { 100, 101, RIG_MTYPE_EDGE }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(1,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(1,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30),MHz(60),IC756_ALL_RX_MODES,-1,-1,IC756_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(2,IC756_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(2,IC756_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .tuning_steps = { {IC756_1HZ_TS_MODES,1}, {IC756_ALL_RX_MODES,kHz(1)}, {IC756_ALL_RX_MODES,kHz(5)}, {IC756_ALL_RX_MODES,kHz(9)}, {IC756_ALL_RX_MODES,kHz(10)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)}, {RIG_MODE_CW, Hz(500)}, {RIG_MODE_AM, kHz(8)}, {RIG_MODE_AM, kHz(2.4)}, {RIG_MODE_FM, kHz(15)}, {RIG_MODE_FM, kHz(8)}, RIG_FLT_END, }, .str_cal = IC756PRO_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void*)&ic756pro_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = NULL, .rig_close = NULL, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .decode_event = icom_decode_event, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .set_ptt = icom_set_ptt, .get_dcd = icom_get_dcd, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_mem_get_split_vfo, }; /* * ic756proII rig capabilities. * TODO: check every paramters, * add antenna capabilities */ static const struct icom_priv_caps ic756pro2_priv_caps = { 0x64, /* default address */ 0, /* 731 mode */ ic756pro_ts_sc_list }; /* * These TOKEN_BACKEND's are on a different name space than conf's */ #define TOK_MEMNAME TOKEN_BACKEND(1) #define TOK_MYCALL TOKEN_BACKEND(2) static const struct confparams ic756pro2_ext_parms[] = { { TOK_SSBBASS, "ssbbass", "SSB Tx Tone (Bass)", "SSB Tx Tone (Bass)", NULL, RIG_CONF_NUMERIC, { .n = { 0, 10, 1 } } }, { TOK_MEMNAME, "showmem", "Show mem name", "Show memory name", NULL, RIG_CONF_CHECKBUTTON, { } }, { TOK_SQLCTRL, "sqlctrl", "RF/Sql control", "set RF/Squelch control", NULL, RIG_CONF_COMBO, { .c = {{ "Auto", "Sql", "RF+Sql", NULL }} } }, { TOK_MYCALL, "mycall", "Callsign", "My call sign", NULL, RIG_CONF_STRING, { } }, { TOK_RTTY_FLTR, "rttyfltr", "RTTY Fltr Width preset", "Set/Read RTTY preset filter width", "350", RIG_CONF_COMBO, { .c = {{"250", "300", "350", "500", "1000", NULL }} } }, { RIG_CONF_END, NULL, } }; /* * NUMERIC: val.f * COMBO: val.i, starting from 0 * STRING: val.cs for set, val.s for get * CHECKBUTTON: val.i 0/1 */ /*IC-756Pro Rig parameters Only available in this namespace*/ #define S_MEM_SC_LEN 2 /* 756PRO S_MEM subcmd length */ #define S_MEM_SBASS 0x501 /* SSB TX tone bass level */ #define S_MEM_NAME 0x514 /* send/read memory name */ #define S_MEM_MYCALL 0x515 #define S_MEM_BEEP 0x520 /* Button confirmation */ #define S_MEM_SQL_CTL 0x522 /* RF/SQL ctl set 0=auto; 1 = sql; 2 = RF+SQL */ #define S_MEM_QSPLT 0x524 /* enable quick split mode */ #define S_MEM_TRCV 0x532 /* CI-V trancieve mode */ #define S_MEM_LANG 0x536 /* 0=English 1=Japanese for voice announcer */ #define S_MEM_SCN_SPD 0x556 /* 0 = low; 1 = high */ #define S_MEM_RTTY_FL_PB 0x561 /* 0=250 Hz, 1=300' 2 = 350, 3 = 500, 4 = 1 KHz */ #define S_MEM_RTTY_TWNPK 0x562 /* rtty twin peak filter off/on */ static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val); static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val); #define IC756PROII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM) #define IC756PROII_1HZ_TS_MODES IC756PROII_ALL_RX_MODES #define IC756PROII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM) #define IC756PROII_AM_TX_MODES (RIG_MODE_AM) const struct rig_caps ic756pro2_caps = { .rig_model = RIG_MODEL_IC756PROII, .model_name = "IC-756PROII", .mfg_name = "Icom", .version = BACKEND_VER, .copyright = "LGPL", .status = RIG_STATUS_ALPHA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 200, .retry = 3, .has_get_func = IC756PRO_FUNC_ALL, .has_set_func = IC756PRO_FUNC_ALL, .has_get_level = IC756PRO_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), .has_get_parm = RIG_PARM_NONE, .has_set_parm = RIG_PARM_NONE, /* FIXME: parms */ .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .extparms = ic756pro2_ext_parms, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC */ .attenuator = { 6, 12, 18, 20, RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(9999), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC756_VFO_OPS, .scan_ops = IC756_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 0, .chan_list = { { 1, 99, RIG_MTYPE_MEM }, { 100, 101, RIG_MTYPE_EDGE }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30),MHz(60),IC756PROII_ALL_RX_MODES,-1,-1,IC756_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(1,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(1,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(1,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30),MHz(60),IC756PROII_ALL_RX_MODES,-1,-1,IC756_VFO_ALL}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(2,IC756PROII_OTHER_TX_MODES, W(5),W(100),IC756_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(2,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(2,IC756PROII_AM_TX_MODES, W(2),W(40),IC756_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .tuning_steps = { {IC756PROII_1HZ_TS_MODES,1}, {IC756PROII_ALL_RX_MODES,kHz(1)}, {IC756PROII_ALL_RX_MODES,kHz(5)}, {IC756PROII_ALL_RX_MODES,kHz(9)}, {IC756PROII_ALL_RX_MODES,kHz(10)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB|RIG_MODE_RTTY, kHz(2.4)}, {RIG_MODE_CW, Hz(500)}, {RIG_MODE_AM, kHz(6)}, {RIG_MODE_AM, kHz(2.4)}, {RIG_MODE_FM, kHz(15)}, {RIG_MODE_FM, kHz(8)}, RIG_FLT_END, }, .str_cal = IC756PRO_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void*)&ic756pro2_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = NULL, .rig_close = NULL, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .decode_event = icom_decode_event, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .set_ptt = icom_set_ptt, .get_dcd = icom_get_dcd, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_rptr_shift = icom_set_rptr_shift, .get_rptr_shift = icom_get_rptr_shift, .set_rptr_offs = icom_set_rptr_offs, .get_rptr_offs = icom_get_rptr_offs, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_mem_get_split_vfo, .set_ext_parm = ic756pro2_set_ext_parm, .get_ext_parm = ic756pro2_get_ext_parm, }; /* * Assumes rig!=NULL, rig->state.priv!=NULL */ static int ic756pro2_set_ext_parm(RIG *rig, token_t token, value_t val) { struct icom_priv_data *priv; struct rig_state *rs; unsigned char epbuf[MAXFRAMELEN], ackbuf[MAXFRAMELEN]; int ack_len, ep_len, val_len; int ep_cmd = C_CTL_MEM; int ep_sc; /* Subcommand in $1A $05xx */ int icom_val = 0; int retval; rs = &rig->state; priv = (struct icom_priv_data*)rs->priv; ep_len = 0; /* 0 implies BCD data */ val_len = 1; switch(token) { case TOK_SSBBASS: ep_sc = S_MEM_SBASS ; icom_val = val.f; break; case TOK_MEMNAME: ep_sc = S_MEM_NAME; icom_val = val.i ? 1 : 0; break; case TOK_SQLCTRL: ep_sc = S_MEM_SQL_CTL; /* TODO: check range this actually doesn't decode the input type 'string' */ icom_val = val.i; break; case TOK_MYCALL: /* max 10 ASCII char */ ep_len = strlen(val.cs); if (ep_len > 10) return -RIG_EINVAL; ep_sc = S_MEM_MYCALL; memcpy(epbuf, val.cs, ep_len); break; case TOK_RTTY_FLTR: /* RTTY filter mode 0 - 4 = 250, 300, 350, 500, 1000 */ if (val.i < 0 || val.i > 4) return -RIG_EINVAL; ep_sc = S_MEM_RTTY_FL_PB; icom_val = val.i; break; default: return -RIG_EINVAL; } if (ep_len == 0) { to_bcd_be(epbuf, (long long)icom_val, val_len*2); ep_len += val_len; } retval = icom_transaction (rig, ep_cmd, ep_sc, epbuf, ep_len, ackbuf, &ack_len); if (retval != RIG_OK) return retval; if (ack_len != 1 || ackbuf[0] != ACK) { rig_debug(RIG_DEBUG_ERR, "%s: ack NG (%#.2x), " "len=%d\n", __FUNCTION__, ackbuf[0], ack_len); return -RIG_ERJCTED; } return RIG_OK; } /* * Assumes rig!=NULL, rig->state.priv!=NULL * and val points to a buffer big enough to hold the conf value. */ static int ic756pro2_get_ext_parm(RIG *rig, token_t token, value_t *val) { struct icom_priv_data *priv; struct rig_state *rs; const struct confparams *cfp; unsigned char resbuf[MAXFRAMELEN]; int res_len, icom_val=0; int cmdhead; int retval; int ep_cmd = C_CTL_MEM; int ep_sc; /* Subcommand in $1A $05xx */ rs = &rig->state; priv = (struct icom_priv_data*)rs->priv; switch(token) { case TOK_SSBBASS: ep_sc = S_MEM_SBASS ; break; case TOK_MEMNAME: ep_sc = S_MEM_NAME; break; case TOK_SQLCTRL: ep_sc = S_MEM_SQL_CTL; break; case TOK_MYCALL: /* max 10 ASCII char */ ep_sc = S_MEM_MYCALL; break; case TOK_RTTY_FLTR: /* RTTY filter mode 0 - 4 */ ep_sc = S_MEM_RTTY_FL_PB; break; default: rig_debug(RIG_DEBUG_ERR,"Unsupported get_ext_parm %d", token); return -RIG_EINVAL; } retval = icom_transaction (rig, ep_cmd, ep_sc, NULL, 0, resbuf, &res_len); if (retval != RIG_OK) return retval; /* * strbuf should contain Cn,Sc,Data area */ cmdhead = (ep_sc == -1) ? 1:S_MEM_SC_LEN + 1; res_len -= cmdhead; /* should echo cmd, subcmd and then data, if you get an ack something is wrong */ if (resbuf[0] != ep_cmd) { if (resbuf[0] == ACK) { rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), " "len=%d\n", __FUNCTION__,resbuf[0],res_len); return -RIG_EPROTO; } else { rig_debug(RIG_DEBUG_ERR,"%s: ack NG (%#.2x), " "len=%d\n", __FUNCTION__,resbuf[0],res_len); return -RIG_ERJCTED; } } cfp = rig_ext_lookup_tok(rig, token); switch(cfp->type) { case RIG_CONF_STRING: memcpy(val->s, resbuf, res_len); break; case RIG_CONF_CHECKBUTTON: case RIG_CONF_COMBO: val->i = from_bcd_be(resbuf+cmdhead, res_len*2); break; case RIG_CONF_NUMERIC: val->f = from_bcd_be(resbuf+cmdhead, res_len*2); break; default: rig_debug(RIG_DEBUG_ERR,"%s: protocol error (%#.2x), " "len=%d\n", __FUNCTION__,resbuf[0],res_len); return -RIG_EPROTO; } rig_debug(RIG_DEBUG_TRACE,"%s: %d %d %d %f\n", __FUNCTION__, res_len, icom_val, val->i, val->f); return RIG_OK; } /* * ic756proIII rig capabilities. * * TODO: check every paramters, * add antenna capabilities */ static const struct icom_priv_caps ic756pro3_priv_caps = { 0x6e, /* default address */ 0, /* 731 mode */ ic756pro_ts_sc_list }; #define IC756PROIII_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM) #define IC756PROIII_1HZ_TS_MODES IC756PROIII_ALL_RX_MODES #define IC756PROIII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_FM) #define IC756PROIII_AM_TX_MODES (RIG_MODE_AM) #define IC756PROIII_VFO_ALL (RIG_VFO_MAIN|RIG_VFO_SUB|RIG_VFO_MEM) #define IC756PROIII_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT|RIG_PARM_APO|RIG_PARM_TIME|RIG_PARM_BEEP) /* * TODO: check whether all func and levels are stored in memory * * No memory split support. * .rptr_offs = 1, to be done for FM special mode * * Channel description should be possible through: 0x1a 0x00 * c.f. http://www.plicht.de/ekki/civ/civ-p4305-756pro.html */ #define IC756PROIII_MEM_CAP { \ .ant = 1, \ .tuning_step = 1, \ .freq = 1, \ .mode = 1, \ .width = 1, \ .ctcss_tone = 1, \ .ctcss_sql = 1, \ .funcs = IC756PRO_FUNC_ALL, \ .levels = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), \ } const struct rig_caps ic756pro3_caps = { .rig_model = RIG_MODEL_IC756PROIII, .model_name = "IC-756PROIII", .mfg_name = "Icom", .version = BACKEND_VER ".1", .copyright = "LGPL", .status = RIG_STATUS_BETA, .rig_type = RIG_TYPE_TRANSCEIVER, .ptt_type = RIG_PTT_RIG, .dcd_type = RIG_DCD_RIG, .port_type = RIG_PORT_SERIAL, .serial_rate_min = 300, .serial_rate_max = 19200, .serial_data_bits = 8, .serial_stop_bits = 1, .serial_parity = RIG_PARITY_NONE, .serial_handshake = RIG_HANDSHAKE_NONE, .write_delay = 0, .post_write_delay = 0, .timeout = 200, .retry = 3, .has_get_func = IC756PRO_FUNC_ALL, .has_set_func = IC756PRO_FUNC_ALL, .has_get_level = IC756PRO_LEVEL_ALL, .has_set_level = RIG_LEVEL_SET(IC756PRO_LEVEL_ALL), .has_get_parm = IC756PROIII_PARMS, .has_set_parm = RIG_PARM_SET(IC756PROIII_PARMS), .level_gran = { [LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } }, }, .parm_gran = {}, .extparms = ic756pro2_ext_parms, .ctcss_list = common_ctcss_list, .dcs_list = NULL, .preamp = { 10, 20, RIG_DBLST_END, }, /* FIXME: TBC values */ .attenuator = { 6, 12, 18, RIG_DBLST_END, }, .max_rit = Hz(9999), .max_xit = Hz(9999), .max_ifshift = Hz(0), .targetable_vfo = 0, .vfo_ops = IC756_VFO_OPS|RIG_OP_TUNE, .scan_ops = IC756_SCAN_OPS, .transceive = RIG_TRN_RIG, .bank_qty = 0, .chan_desc_sz = 10, /* TODO */ .chan_list = { { 1, 99, RIG_MTYPE_MEM, IC756PROIII_MEM_CAP }, { 100, 101, RIG_MTYPE_EDGE, IC756PROIII_MEM_CAP }, /* two by two */ RIG_CHAN_END, }, .rx_range_list1 = { {kHz(30),MHz(60),IC756PROIII_ALL_RX_MODES,-1,-1,IC756PROIII_VFO_ALL,IC756_ANTS}, RIG_FRNG_END, }, .tx_range_list1 = { FRQ_RNG_HF(1,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(1,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(1,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(1,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .rx_range_list2 = { {kHz(30),MHz(60),IC756PROIII_ALL_RX_MODES,-1,-1,IC756PROIII_VFO_ALL,IC756_ANTS}, RIG_FRNG_END, }, .tx_range_list2 = { FRQ_RNG_HF(2,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS), FRQ_RNG_6m(2,IC756PROIII_OTHER_TX_MODES, W(5),W(100),IC756PROIII_VFO_ALL,IC756_ANTS), FRQ_RNG_HF(2,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */ FRQ_RNG_6m(2,IC756PROIII_AM_TX_MODES, W(5),W(40),IC756PROIII_VFO_ALL,IC756_ANTS), /* AM class */ RIG_FRNG_END, }, .tuning_steps = { {IC756PROIII_1HZ_TS_MODES,1}, {IC756PROIII_1HZ_TS_MODES,100}, {IC756PROIII_ALL_RX_MODES,kHz(1)}, {IC756PROIII_ALL_RX_MODES,kHz(5)}, {IC756PROIII_ALL_RX_MODES,kHz(9)}, {IC756PROIII_ALL_RX_MODES,kHz(10)}, {IC756PROIII_ALL_RX_MODES,kHz(12.5)}, {IC756PROIII_ALL_RX_MODES,kHz(20)}, {IC756PROIII_ALL_RX_MODES,kHz(25)}, RIG_TS_END, }, /* mode/filter list, remember: order matters! */ .filters = { {RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(2.4)}, {RIG_MODE_CW|RIG_MODE_CWR, Hz(500)}, {RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, kHz(3.6)}, /* wide */ {RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, Hz(50)}, /* narrow */ {RIG_MODE_AM, kHz(6)}, {RIG_MODE_AM, kHz(2.4)}, {RIG_MODE_FM, kHz(15)}, {RIG_MODE_FM, kHz(8)}, {RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|RIG_MODE_RTTY|RIG_MODE_RTTYR, RIG_FLT_ANY}, /* almost any filter */ RIG_FLT_END, }, .str_cal = IC756PRO_STR_CAL, .cfgparams = icom_cfg_params, .set_conf = icom_set_conf, .get_conf = icom_get_conf, .priv = (void*)&ic756pro3_priv_caps, .rig_init = icom_init, .rig_cleanup = icom_cleanup, .rig_open = NULL, .rig_close = NULL, .set_freq = icom_set_freq, .get_freq = icom_get_freq, .set_mode = icom_set_mode, .get_mode = icom_get_mode, .set_vfo = icom_set_vfo, .set_ant = icom_set_ant, .get_ant = icom_get_ant, .decode_event = icom_decode_event, .set_parm = icom_set_parm, .get_parm = icom_get_parm, .set_level = icom_set_level, .get_level = icom_get_level, .set_func = icom_set_func, .get_func = icom_get_func, .set_mem = icom_set_mem, .vfo_op = icom_vfo_op, .scan = icom_scan, .set_ptt = icom_set_ptt, .get_dcd = icom_get_dcd, .set_ts = icom_set_ts, .get_ts = icom_get_ts, .set_ctcss_tone = icom_set_ctcss_tone, .get_ctcss_tone = icom_get_ctcss_tone, .set_ctcss_sql = icom_set_ctcss_sql, .get_ctcss_sql = icom_get_ctcss_sql, .set_split_freq = icom_set_split_freq, .get_split_freq = icom_get_split_freq, .set_split_mode = icom_set_split_mode, .get_split_mode = icom_get_split_mode, .set_split_vfo = icom_set_split_vfo, .get_split_vfo = icom_mem_get_split_vfo, .set_ext_parm = ic756pro2_set_ext_parm, .get_ext_parm = ic756pro2_get_ext_parm, };