mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
9 523 Commity
53 Gałęzie
28 Tagi
39 MiB
Wykres commitów

9523 Commity (4.5.3)

Autor SHA1 Wiadomość Data
Mike Black W9MDB b6209911b0 Update NEWS 2022-12-31 14:46:26 -06:00
Mike Black W9MDB 6a677b9919 Bump version to 4.5.3 2022-12-31 13:44:53 -06:00
Mike Black W9MDB 084617dbb9 Update NEWS 2022-12-31 09:41:01 -06:00
Mike Black W9MDB 6643d44ed9 Remove set_rts and set_dtr low from serial.c 
This was causing hardward flow control to fail on Linux and MacOS
https://github.com/Hamlib/Hamlib/issues/1198
https://github.com/Hamlib/Hamlib/issues/1199
 2022-12-31 09:34:47 -06:00
Mike Black W9MDB 1f332d7333 Update NEWS 2022-12-31 08:10:57 -06:00
Mike Black W9MDB 85c4f73061 Add QRPLabs QCX/QDX for better behavior/capability from ts480 entry 2022-12-31 08:10:29 -06:00
Mike Black W9MDB 96c8278d3b Update NEWS 2022-12-31 08:09:01 -06:00
Mike Black W9MDB 7898baf6ed Allow for 36 and 37 byte IF lengths for ic10.c 
This should fix QRP QRDX buggy IF message -- hopefully the fix theirs to send 33 bytes.
https://github.com/Hamlib/Hamlib/issues/1196#issuecomment-1367473810
 2022-12-29 11:38:32 -06:00
Mike Black W9MDB 4f8c9b1f49 astyle newcat.c 2022-12-28 16:39:21 -06:00
Mike Black W9MDB 43e46d49c5 FTDX5000 will now remember startup front/rear setting and restore it 
Will also allow front/rear selection in WSJT-X/JTDX
https://github.com/Hamlib/Hamlib/issues/1195
 2022-12-28 16:39:10 -06:00
Mike Black W9MDB ba079fe7f0 Make FT5000 EX1031;TX1; command two commands 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 16:38:59 -06:00
Mike Black W9MDB 9ad6f24089 Make sure FT5000 is in data mode for PTT request -- returns to MIC mode on shutdown 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 16:38:47 -06:00
Mike Black W9MDB 35946f5d6b FT5000 cannot use RIG_PTT_ON_DATA/MIC menu 103 control and is now set for rear automatically too 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 16:38:35 -06:00
Mike Black W9MDB fcffad9ff2 Update NEWS 2022-12-26 10:25:06 -06:00
Mike Black W9MDB a3fecb63a2 Change FTDX5000 write_delay to zero -- was causing microham to return ?; to every command 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-12-26 10:23:44 -06:00
Mike Black W9MDB 5b46a408f3 Update NEWS 2022-12-24 14:04:08 -06:00
Mike Black W9MDB 16e55b6047 Fix grep error on mingw build 2022-12-24 13:54:54 -06:00
Mike Black W9MDB f12ac6279b Update NEWS 2022-12-23 17:04:12 -06:00
Mike Black W9MDB ad511c496e Update NEWS 2022-12-23 16:54:44 -06:00
Mike Black W9MDB ee96efd5bc Make FTDX5000 return to MIC input on closing 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-23 16:53:48 -06:00
Mike Black W9MDB 289788bae9 Update NEWS 2022-12-20 08:50:32 -06:00
Mike Black W9MDB 0d2fd757bf Remove powerstat from TX-500 -- was always responding PS0; 
https://github.com/Hamlib/Hamlib/issues/1188
 2022-12-20 08:39:15 -06:00
Mike Black W9MDB fef4c674a1 Allow POWERSDR to do commands when powered off 2022-12-20 08:37:42 -06:00
Mike Black W9MDB b041a7f607 Change TX-500 to only have 9600 baud available 
https://github.com/Hamlib/Hamlib/issues/1188
 2022-12-20 08:31:28 -06:00
Mike Black W9MDB ac882ee896 Fix unidirectional rig cached frequency (e.g. FT736R) 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-18 09:04:46 -06:00
Mike Black W9MDB ce8f50d04c Ensure get_powerstat return RIG_OK when rig does not have get_powerstat 
https://github.com/Hamlib/Hamlib/issues/1189
 2022-12-18 09:03:47 -06:00
Mike Black W9MDB 701a53ce23 Reset rig->state.cache.split so it can be set again when rigctld reopens the rig 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-17 10:44:07 -06:00
Mike Black W9MDB baaf214f9c FT-736 did not have get_mode so only call get_mode when available 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-17 10:43:55 -06:00
Mike Black W9MDB 777a40216e Do not reset cache for unidirectional rigs 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-17 10:19:46 -06:00
Mike Black W9MDB 7a3600295f FT-736 did not have get_mode so only call get_mode when available 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-17 10:07:16 -06:00
Mike Black W9MDB 3b8bc150d1 Update NEWS 2022-12-17 10:04:15 -06:00
Mike Black W9MDB b35dc746cc Update NEWS 2022-12-15 17:14:35 -06:00
Mike Black W9MDB 9f67561d23 Fix kenwood_ts890_get_level -- thanks to N3GB George Baltz 2022-12-15 17:12:58 -06:00
Mike Black W9MDB 2d226f4464 Update NEWS 2022-12-15 12:12:10 -06:00
PianetaRadio d31d651de5 Update rotlist.h 
Add Elevation rotator with Control box responding to azimuth logic
 2022-12-15 12:12:00 -06:00
PianetaRadio bc7e88dd9d Update prosistel.c 
Add Elevation rotator with Control box responding to azimuth logic
 2022-12-15 12:11:50 -06:00
PianetaRadio fcf69dff5e Update prosistel.h 
Add Elevation rotator with Control box responding to azimuth logic
 2022-12-15 12:11:40 -06:00
PianetaRadio b1e501a856 Update prosistel.c 
Add Elevation rotator with Control box responding to azimuth logic
 2022-12-15 12:11:28 -06:00
Mike Black W9MDB 4e88d847b0 Update NEWS 2022-12-14 11:18:46 -06:00
Mike Black W9MDB 80cdb9b953 Update NEWS 2022-12-14 11:18:15 -06:00
Mike Black W9MDB f0636bc875 Add get_freq cached for FT736R to allow working with gpredict 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-14 11:15:57 -06:00
Mike Black W9MDB bc45b17ae2 If get_powerstat fails assume rig is powered on -- should fix sdr++ problem 
https://github.com/Hamlib/Hamlib/issues/1186
 2022-12-14 11:07:03 -06:00
Mike Black W9MDB 2dd31355fc If get_powerstat fails in any way then always return RIG_POWER_ON 
https://github.com/Hamlib/Hamlib/issues/1189
 2022-12-14 10:08:53 -06:00
Mike Black W9MDB 9edbc9e4b0 Update NEWS 2022-12-14 10:08:28 -06:00
Mike Black W9MDB 23d98c1e56 Update NEWS 2022-12-12 23:54:06 -06:00
Mike Black W9MDB fd186abcae -R option will keep rig open as long as 1 or more clients are connected 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-12 23:52:30 -06:00
Mike Black W9MDB 01799cb64f Allow rigctld to close the rig with the -R option when client disconnects. 
This makes it close when any one client disconnects.
Should only close when no clients are connected -- that will be the next patch
This is for the FT736R and gpredict
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-12 23:52:01 -06:00
Mike Black W9MDB 46f30345b9 If get_powerstat fails assume rig is powered on -- should fix sdr++ problem 
https://github.com/Hamlib/Hamlib/issues/1186
 2022-12-12 23:51:46 -06:00
Mike Black W9MDB 8592040262 Update simftdx1200.c 2022-12-11 14:51:58 -06:00
Mike Black W9MDB 0d4f647da3 Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency 
https://github.com/Hamlib/Hamlib/issues/1185
 2022-12-11 13:57:43 -06:00