Michael Black W9MDB
cd7811f3ed
Fix icom_get_mode for rigs with 1-byte mode_len
...
https://github.com/Hamlib/Hamlib/issues/522
2021-01-29 16:32:16 -06:00
Michael Black W9MDB
e7b6e61ed0
astyle files prepping for 4.1 release
2021-01-22 10:41:30 -06:00
Michael Black W9MDB
599974bcea
Fix compilation error in icom.c
2021-01-20 22:54:37 -06:00
Michael Black W9MDB
5a9daf5f0e
Fix ic703 and ic705 RIG_LEVEL_RFPOWER_METER_WATTS to scale to 10W instead of 100W
2021-01-20 15:07:59 -06:00
Michael Black W9MDB
598b105e79
astyle files prepping for 4.1 release
2021-01-15 16:48:32 -06:00
Michael Black W9MDB
8024ffb937
Change icom_get_usb_echo_off to return TIMEOUT when it occurs instead of RIG_OK
...
https://github.com/Hamlib/Hamlib/issues/509
2021-01-13 12:42:03 -06:00
Michael Black W9MDB
cf858bfa3c
Change rig.c to return RIG_ENAVAIL instead of RIG_ENTARGET when set_vfo==NULL
...
Add IC706* to rigs that don't do dsp settings
Remove dynamic detection of transceive status in icom/frame.c
https://github.com/Hamlib/Hamlib/issues/490
2021-01-08 12:04:25 -06:00
Michael Black W9MDB
02c0854434
In icom.c init() set priv->filter to RIG_PASSBAND_NOCHANGE to fix set_mode rigs with 2-byte cmds
...
https://github.com/Hamlib/Hamlib/issues/490
2021-01-06 17:04:44 -06:00
Michael Black W9MDB
3211e3aea1
astyle files
2020-12-21 23:50:29 -06:00
Mikael Nousiainen
9e62b2783f
Fix RIG_PASSBAND_NOCHANGE use with Icom data modes. Allow selecting FIL2 as normal passband when in data mode. Add new Icom rigs to list that determines whether Icom data mode command supports setting filter too.
2020-12-21 18:15:15 +02:00
Michael Black W9MDB
2b1bce89bf
Fix icom default filter settings
...
https://github.com/Hamlib/Hamlib/issues/471
2020-12-19 14:30:31 -06:00
Michael Black W9MDB
263f1cde72
astyle files
2020-12-17 15:07:04 -06:00
Michael Black W9MDB
2a0deb3415
Add RIG_LEVEL_RFPOWER_METER_WATTS
...
Old level of 0-1 just doesn't work well with the varying power levels in rigs now
2020-12-16 17:47:49 -06:00
Michael Black W9MDB
9b98a264ab
Fix datamode set in icom.c to use 0x00 0x00 per the manual for 7300 and 9700
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-13 00:01:09 -06:00
Michael Black W9MDB
5883897656
icom.c passband nochange seems to be working
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 23:05:59 -06:00
Michael Black W9MDB
cdeacfb7d1
move icom.c icmode_ext setting a bit earlier in the code
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 15:38:42 -06:00
Michael Black W9MDB
ddb38db106
Set icom_set_mode to use existing filter for passband nochange
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 15:33:38 -06:00
Michael Black W9MDB
3061a5f8b2
Fix icom filter value, not ASCII!!!
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:40:04 -06:00
Michael Black W9MDB
915666add2
Remember filter setting from icom_get_mode so we can refer to it later on set_mode
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 12:21:54 -06:00
Michael Black W9MDB
e4e88b833d
Eliminate warning in icom.c for passband nochange
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 11:24:07 -06:00
Michael Black W9MDB
c0743dfe6e
astyle icom.c
2020-12-12 10:06:44 -06:00
Michael Black W9MDB
2ff3fa0782
icom now recognizes RIG_PASSBAND_NOCHANGE
...
https://github.com/Hamlib/Hamlib/issues/448
2020-12-12 10:06:00 -06:00
Michael Black W9MDB
c70d841b83
Add NOCHANGE_PASSBAND to icom...cascading effect on adding vfo elsewhere...which is needed anyways
...
https://github.com/Hamlib/Hamlib/issues/448
2020-11-29 23:32:14 -06:00
Michael Black W9MDB
20fc303686
Fix set_mode for IC-7000
...
https://github.com/Hamlib/Hamlib/issues/428
2020-11-03 15:24:06 +00:00
Michael Black W9MDB
51b4e0966c
Remove bad targetable code from rigs
...
https://github.com/Hamlib/Hamlib/issues/430
https://github.com/Hamlib/Hamlib/issues/414
2020-11-01 17:05:29 -06:00
Michael Black W9MDB
fd9e5d841b
Backing out targetable flags due to segfault on Linux
...
https://github.com/Hamlib/Hamlib/issues/431
2020-11-01 15:35:17 -06:00
Michael Black W9MDB
5721db70be
Added two more targetable flags for MEM and BANK to avoid VFO swapping
...
https://github.com/Hamlib/Hamlib/issues/430
https://github.com/Hamlib/Hamlib/issues/414
2020-11-01 07:48:52 -06:00
Michael Black W9MDB
74356b3a99
Add RIG_TARGETABLE_PTT and RIG_TARGETABLE_RITXIT
...
For most rigs these are non-vfo specific commands so we can avoid doing VFO switching
Add flags to all Yaesu, Icom, and Kenwood in rig_open
Some rigs do have VFO specific but it's already in the backend
More rigs can use these flags..TBD...
https://github.com/Hamlib/Hamlib/issues/430
2020-10-31 17:19:08 -05:00
Michael Black W9MDB
f55d50c7bc
Finish IC-729 addition
...
https://github.com/Hamlib/Hamlib/issues/429
2020-10-29 22:45:57 -05:00
Michael Black W9MDB
1e41f32017
Remove unused var from icom.c
2020-10-16 18:09:08 -05:00
Michael Black W9MDB
28b7543de6
Add stop_morse to Icom rigs
...
https://github.com/Hamlib/Hamlib/issues/240
2020-10-16 17:26:02 -05:00
Mikael Nousiainen
a77e82be4e
Fix handling of Icom repeater shift and split command responses. Add tuning step definitions for IC-9700.
2020-10-14 18:19:00 +03:00
Michael Black W9MDB
0576a01ec2
astyle files
2020-10-01 22:51:31 -05:00
Mikael Nousiainen
499d17cd20
Fix errors in Icom extcmd definitions and handling. Migrate more commands on Icom rigs to use extcmds. Add extfuncs to dummy rig for testing.
2020-09-16 22:33:39 +03:00
Mikael Nousiainen
23971f8e75
Fix issues with Icom extcmds definitions, some ext_tokens missing. Refactor custom level implementations to use extcmds definitions. Print out extfuncs in caps dump.
2020-09-16 18:10:35 +03:00
Michael Black W9MDB
b97d05369c
astyle files
2020-09-14 23:12:35 -05:00
Michael Black W9MDB
6267d2674e
Fix icom LEVELs
2020-09-14 14:45:36 -07:00
Michael Black W9MDB
9c5b7499f6
Fix IC7300 set_parm PARM_TIME
2020-09-14 09:18:43 -07:00
Michael Black W9MDB
aeaa96bc3b
Fix icom_get_parm to eliminate collisions
2020-09-12 21:37:10 -07:00
Michael Black W9MDB
6e45a7ba78
Fix ic7300 VOXDELAY and other extcmd structures
2020-09-12 14:26:57 -07:00
Michael Black W9MDB
83667f4c65
Added CMD_PARAM_TYPE values for icom rigs to distinguish the different ext cmd types
...
https://github.com/Hamlib/Hamlib/issues/373
2020-09-12 11:21:33 -05:00
Michael Black W9MDB
03ad7a953f
Update codeql
2020-09-11 22:44:35 -05:00
Michael Black W9MDB
2020f29185
Remove redundant RIG_LEVEL_BRIGHT
2020-09-10 10:07:11 -05:00
Michael Black W9MDB
24fb47cbe0
Added IC-705
...
Added RIG_LEVEL_BRIGHT -- IC705 has this level
Fixed range printout
https://github.com/Hamlib/Hamlib/issues/364
2020-09-06 12:28:35 -05:00
Michael Black W9MDB
fade1681fa
Fix cppcheck errors and warnings
2020-09-02 16:56:11 -05:00
Michael Black W9MDB
e459d4edc2
astyle files
2020-09-01 09:06:46 -05:00
Mike Goodey
1138feb576
Remove icom_set_rit - it doesn't (and can't) work - see README.icom
2020-09-01 14:41:45 +01:00
Daniele Forsi
d7b332c3f7
Fix spelling errors
...
Fixed using the following command:
codespell --write-changes --summary --skip=*.m4 --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
codespell --write-changes --summary --skip=aclocal.m4,lib --ignore-words-list="develope,get's,quitt,setts,som,ue,vektor"
Codespell home page: https://github.com/codespell-project/codespell
2020-07-24 09:02:48 +02:00
Michael Black W9MDB
133a8acd30
Fix icom MainA/B SubA/B VFO selection
...
https://github.com/Hamlib/Hamlib/issues/348
2020-07-20 14:42:46 +02:00
Michael Black W9MDB
4efbddd0e8
Add ability to set Icom MAIN_VFO_A/B and SUB_VFO_A/B
...
https://github.com/Hamlib/Hamlib/issues/348
2020-07-19 17:21:23 -05:00
Michael Black W9MDB
ba72dc74b2
Upgrade some rigs to STABLE
2020-07-16 11:06:39 -05:00
Michael Black W9MDB
5e801fd2b5
astyle files
2020-07-07 11:39:26 -05:00
Bill Somerville
281febec62
New power on option rather than power on/off
...
Also fixes incorrect token name usage in token definition
2020-07-04 23:23:39 +01:00
Bill Somerville
3f40029720
Add missing config parameters for rig power on/off and screen-saver
...
Defaults set to by compatible with prior released versions to avoid
regressive behaviour.
2020-07-04 19:42:37 +01:00
Michael Black W9MDB
b2dce86e91
Add comment about IC-756 data mode
2020-07-03 23:40:20 -05:00
Michael Black W9MDB
b6a960d48e
All conversions to rig_flush now done
...
https://github.com/Hamlib/Hamlib/issues/307
2020-06-23 09:01:46 -05:00
Michael Black W9MDB
35001b12c0
astyle icom.c
2020-06-21 14:47:38 -05:00
Michael Black W9MDB
362fa77cfd
Move poweron set outside of check to ensure only once whether started power off or on
...
https://github.com/Hamlib/Hamlib/issues/297
2020-06-14 17:20:31 -05:00
Michael Black W9MDB
8fd58e211d
Rigs will only power up once if needed
...
https://github.com/Hamlib/Hamlib/issues/297
2020-06-14 17:14:24 -05:00
Michael Black W9MDB
71b867e141
Add some debug to icom.c
2020-06-14 09:43:42 -05:00
Michael Black W9MDB
c5388b9f37
In icom.c remove priv->curr_vfo and change to rig->state.current_vfo
...
https://github.com/Hamlib/Hamlib/issues/299
2020-06-13 15:53:37 -05:00
Michael Black W9MDB
723f3f0773
Add some more rig cases for MainA/B and Sub A/B priv setting in icom_get_freq
...
Add VFO_CURR as a valid VFO
https://github.com/Hamlib/Hamlib/issues/299
2020-06-13 07:51:35 -05:00
Michael Black W9MDB
2db0da54ea
Add VFO_CURR MAINA/B SUBA/B as valid vfos in icom.c
2020-06-12 17:54:41 -05:00
Michael Black W9MDB
b15c73d2d2
Fix segmentation fault/endless loop for Icom rigs
2020-06-12 16:34:48 -05:00
Michael Black W9MDB
7cdaa0efd1
Change icom.c VFO_TX VFO_RX adjustment to use vfo_fixup function
...
vfo_fixup should be able to handle all rigs variations
https://github.com/Hamlib/Hamlib/issues/299
2020-06-12 07:57:13 -05:00
Michael Black W9MDB
f6112a0d93
Remove block preventing IC910 from reading VFOB during split and returning VFOA
2020-06-11 22:27:38 -05:00
Michael Black W9MDB
b910fa0c58
When get_split_freq_mode is called with RIG_VFO_CURR and split is not enabled
...
we will assume the TX vfo is VFOB or Sub as appropriate
This hopefully makes WSJT-X happy with Icom rigs now.
https://github.com/Hamlib/Hamlib/issues/288
2020-06-11 08:15:52 -05:00
Michael Black W9MDB
9e18b234c2
Change icom_get_split_freq to reset to rx_vfo when done
...
Just like icom_set_split_freq
https://github.com/Hamlib/Hamlib/issues/291
2020-06-10 17:16:52 -05:00
Michael Black W9MDB
876c7bd59f
Fix RIG_VFO_TX clause in icom.c
2020-06-10 08:10:35 -05:00
Michael Black W9MDB
f71c12da94
astyle files
2020-06-09 22:37:03 -05:00
Michael Black W9MDB
750857cdbc
Update comment in icom.c
2020-06-09 22:28:13 -05:00
Michael Black W9MDB
ee8dde16ea
When rig_set_split_freq_mode is called and RIG_VFO_CURR is requested use default tx_vfo
...
https://github.com/Hamlib/Hamlib/issues/288
2020-06-09 12:16:45 -05:00
Michael Black W9MDB
718fcdf0c1
icom.c put one more satmode call in a RIG_FUNC_SATMODE clause
...
https://github.com/Hamlib/Hamlib/issues/288
2020-06-08 23:09:21 -05:00
Michael Black W9MDB
c5732d542e
Fix icom.c so most all satmode requests are restricted to rigs with RIG_FUNC_SATMODE
...
https://github.com/Hamlib/Hamlib/issues/288
2020-06-08 23:04:04 -05:00
Bill Somerville
cc9dfd3b0e
Fixing an operator precedence defect
2020-06-06 02:24:04 +01:00
Michael Black W9MDB
d9d1074f24
Fix IC-910 behavior with gpredict
...
Now allows switching between full duplex, split, and non-split mode
https://github.com/Hamlib/Hamlib/issues/237
2020-06-04 10:37:20 -05:00
Michael Black W9MDB
a8e5a66ffd
Add FT_DX101D as another rig that can't get freq during PTT
...
https://github.com/Hamlib/Hamlib/issues/279
2020-06-03 16:58:42 -05:00
Michael Black
00031994c6
Remove block setting VFO_A -- does not work with rigs that don't have
...
VFO_A
https://github.com/Hamlib/Hamlib/issues/274
2020-06-01 17:38:03 -05:00
Michael Black W9MDB
5df9f81bef
Fix RIG_VFO_NONE problem in icom.c
...
https://github.com/Hamlib/Hamlib/issues/270
2020-05-30 16:59:18 -05:00
Michael Black W9MDB
353066a232
Fix rigctl/rigctld split ops/queries
...
Add vfo_fixup function. We should be able to do all vfo corrections in rig.c instead of backends. So we're migrating that way....
https://github.com/Hamlib/Hamlib/issues/269
2020-05-30 09:34:13 -05:00
Michael Black W9MDB
677ccac4bc
astyle files
2020-05-27 12:23:08 -05:00
Michael Black W9MDB
281022447c
Update some more items in icom.c where appropriate
2020-05-25 09:11:32 -05:00
Michael Black W9MDB
1add89bd71
Add rules for setting VFO_RX and VFO_TX for different rig types
...
https://github.com/Hamlib/Hamlib/issues/261
2020-05-24 23:42:35 -05:00
Michael Black W9MDB
a77a57ff38
Disallow requesting a vfo that the rig doesn't have.
...
This could be changed to automatically selecting a valid VFO so
VFOA=Main or Main=VFOA for example but not sure if we want to do this.
This is already being done for the IC-9700 for example since satmode
only has Main/Sub where non-satmode has MainA/MainB/SubA/SubB
So the question is do we emulate VFOA/B and Main/Sub for all rigs?
2020-05-21 15:51:41 +02:00
Michael Black W9MDB
9c902dd03b
IC-9700 in satmode requesting "S 1 Sub" will now return RIG_OK without
...
taking any action
Since satmode is Sub split anyways this makes sense
https://github.com/Hamlib/Hamlib/issues/254
2020-05-20 06:42:06 +02:00
Michael Black W9MDB
5a631b2f54
Fix icom detection of split mode setting vfos
...
https://github.com/Hamlib/Hamlib/issues/250
2020-05-18 00:39:08 +02:00
Michael Black W9MDB
2e3678d1a7
Fix main/sub frequency saved values
2020-05-17 17:27:28 -05:00
Michael Black W9MDB
ba703787d9
Merge branch 'master' of https://github.com/mdblack98/Hamlib
2020-05-16 15:22:48 -05:00
Michael Black W9MDB
1af1650716
Fix IC_9700 type rigs when client asks for Sub VFO but split or satmode
...
is not in use
https://github.com/Hamlib/Hamlib/issues/250
2020-05-16 21:34:26 +02:00
Michael Black W9MDB
87b25d0c43
If icom rig is asked for VFOA/B but only has Main/Sub
...
then we map VFOA=Main VFOB=Sub
https://github.com/Hamlib/Hamlib/issues/250
2020-05-16 08:31:34 -05:00
Michael Black W9MDB
906a369e00
Change icom behavior for IC-9700 type rig with Main/A/B && Sub A/B setup
...
If Sub is asked for but neither split nor satmode is on it will get changed
to VFOB instead which should avoid doing a VFO swap
https://github.com/Hamlib/Hamlib/issues/250
2020-05-16 07:55:59 -05:00
Michael Black W9MDB
156db580f8
IC-910 (and hopefully IC-9700) now working with gpredict in both simplex non-satmode and full duplex satmode
...
As of 20200514 switching to satmode will automically switch rig to satmode
But switching back to simple requires manually going back to split mode until gpredict provide the correct split mode request of "S 1 VFOB" or "S 1 VFOA"
https://github.com/Hamlib/Hamlib/issues/237
2020-05-14 12:15:37 -04:00
Michael Black W9MDB
9c4dfbc34c
Fix IC910 satellite mode operations
...
https://github.com/Hamlib/Hamlib/issues/237
2020-05-14 10:21:47 -04:00
Michael Black W9MDB
ad7fe1253b
Fix merge
2020-05-12 12:28:19 -05:00
Michael Black W9MDB
6a199559fa
Fix merge
2020-05-12 12:22:51 -05:00
Michael Black W9MDB
fca384dcd6
Fix debug statement in icom.c
2020-05-12 12:16:12 -04:00
Michael Black W9MDB
2813f0ef63
astyle files
2020-05-11 22:39:10 -05:00
Michael Black W9MDB
74cdd96eda
Fix merge of icom.c
2020-05-11 18:05:11 -05:00
Michael Black W9MDB
3b2225e489
Fix IC-910 split mode operation with gpredict
...
https://github.com/Hamlib/Hamlib/issues/237
2020-05-11 19:00:52 -04:00
Michael Black W9MDB
0ffddf779d
Change icom.c set_freq to detect error on bad freq set and swap VFOs back and not update anything
...
Add some more debug
https://github.com/Hamlib/Hamlib/issues/237
2020-05-10 07:40:06 -05:00
Michael Black W9MDB
1a4e61b2dd
Fix several strerror that should be rigerror
2020-05-09 11:52:27 -05:00
mdblack98
0b3605597f
Fix cppcheck warning in icom.c
2020-05-05 22:20:33 -05:00
mdblack98
fa711bb550
Remove unused variable set in icom.c
2020-05-05 22:18:18 -05:00
mdblack98
a3b1b055b3
Fix cppcheck warnings
2020-05-05 11:32:09 -05:00
mdblack98
05ad81bd2c
Update comment in icom.c
2020-05-05 09:50:57 -05:00
mdblack98
baa3787bc5
Add ELAPSED_INVALIDATE for caching use
...
Change rig_get_vfo to use ELAPSED_INVALIDATE
Change elapsed_ms code to make a little more sense
https://github.com/Hamlib/Hamlib/issues/231
2020-05-02 11:19:44 -05:00
mdblack98
48b0234caf
icom.c if VFOA/B is requested for rig without VFOA/A maps to Main/Sub
...
https://github.com/Hamlib/Hamlib/issues/231
2020-05-01 17:51:20 -05:00
mdblack98
2991d43e26
If icom.c rig_get_freq is called and VFO is None then VFO gets set to the requexted VFO
...
https://github.com/Hamlib/Hamlib/issues/231
2020-05-01 10:35:16 -05:00
mdblack98
acc468fcfd
Fix channel reading for civ_731 icom rigs
...
I assume this is true on all such rigs that they return 5 bytes
Writing and reading a channel should confirm it by returning the correct freq
https://github.com/Hamlib/Hamlib/issues/217
2020-04-26 08:45:16 -05:00
mdblack98
7a075ae9fd
https://github.com/Hamlib/Hamlib/issues/222
...
Fix order of calls in icom_get_split_vfos
Need to set split before getting vfos
2020-04-23 22:50:34 -05:00
mdblack98
a9a604758d
https://github.com/Hamlib/Hamlib/issues/222
...
Fix icom_get_split_vfo filling in rx_vfo and tx_vfo
icom_get_split_vfo: vfo=currVFO rx_vfo=None tx_vfo=None split=0
2020-04-23 15:35:29 -05:00
Michael Black
c489f97624
More cppcheck changes
2020-03-20 07:51:32 -05:00
Michael Black
f90046516e
Fix cppcheck item in icom.c
2020-03-16 11:56:34 -05:00
Michael Black
de624c0b8e
Remove get_freq_range from icom_open
2020-03-16 11:17:16 -05:00
Michael Black
35fffc4f38
astyle files
2020-03-15 15:32:46 -05:00
Michael Black
4d06d195e5
Fix ackbuf and add vfo set default in rig_set_split_freq
2020-03-15 15:21:24 -05:00
Michael Black
9ab1130d09
Remove setting default vfo in icom_get_freq.
...
Fix 0x1c0x03 command frequency
2020-03-15 15:03:27 -05:00
Michael Black
4b31563ffb
Change all rc names to retval for consistency
2020-03-14 23:29:07 -05:00
Michael Black
33c1adb158
Add 0x1c 0x03 command to icom_get_freq to eliminate vfo swapping when asking for VFO_TX
2020-03-14 23:25:27 -05:00
Michael Black
d61719ef3b
Add 0x1c 0x03 command to get tx freq in icom_get_split_freq
2020-03-14 22:57:29 -05:00
Michael Black
1e658578ec
Reset x25cmdfails when SATMODE is called
2020-03-14 15:21:56 -05:00
Michael Black
92c6f3924e
Only do x25 command if not in satellite mode for icom rigs
2020-03-14 15:07:49 -05:00
Michael Black
79661711f1
Change 0x25 to constant in icom.c
2020-03-14 14:55:46 -05:00
Michael Black
40ebea303c
astyle icom.c
2020-03-14 14:51:35 -05:00
Michael Black
b1185fb5ff
Set x25cmdfails so it won'r get repeated if not available
2020-03-14 14:51:23 -05:00
Michael Black
f0506f3ab4
Add 0x25 command testing icoms that can set vfos without swapping
2020-03-14 13:00:46 -05:00
Michael Black
e8673161fd
Change icom satmode rigs to return to rx_vfo after set_split_freq
2020-03-13 10:09:32 -05:00
Michael Black
e9ba470d65
Ensure priv->curr_vfo is set to Main for SATMODE rigs as default when no VFO has been set before asking get_* functions
2020-03-13 08:44:01 -05:00
Michael Black
b5680c108d
Working on get_freq_range
2020-03-12 17:53:49 -05:00
Michael Black
6e61069df5
Working on get_freq_range
2020-03-12 17:42:23 -05:00
Michael Black
6983bdd3b0
Working on get_freq_range
2020-03-12 17:32:17 -05:00
Michael Black
793f73475b
Working on get_freq_range
2020-03-12 17:19:20 -05:00
Michael Black
d26006122f
Working on get_freq_range
2020-03-12 17:11:08 -05:00
Michael Black
66b3190fa9
Improve comment in icom.c
2020-03-12 17:01:59 -05:00
Michael Black
e197b90d81
Working on get_freq_range
2020-03-12 16:58:55 -05:00
Michael Black
c8e4e99e97
Reenable icom_get_freq_range now that rigctld stays open after first called
2020-03-12 15:57:05 -05:00
Michael Black
42871be196
Added some places to set default vfo when vfo has not been set yet. We're avoiding setting the default VFO on startup but allowing for clients which don't set the vfo properly.
...
Commented out icom_get_freq_range as can't have this on every rig_open call...too busy for rigctld
2020-03-12 10:12:59 -05:00
Michael Black
7685613310
Add setting of vfo when client does not set vfo themselves and instead asks to do things with RIG_VFO_CURR
2020-03-11 17:37:23 -05:00
Michael Black
40919d703f
Fix icom_get_freq_range index
2020-03-09 23:03:48 -05:00
Michael Black
e6e9d8d8aa
Fix acklen in icom_get_freq_range
2020-03-09 22:56:25 -05:00
Michael Black
d5592f43a8
Remove set_vfo from icom_get_split split=0
2020-03-09 15:37:53 -05:00
Michael Black
ced93c5c7c
Disabel set_vfo calls in icom_set_split
...
Needs to be tested with gpredict operations
2020-03-09 12:25:33 -05:00
Michael Black
aaf8a074d9
Force final VFO selection in icom_set_split
2020-03-09 09:16:30 -05:00
Michael Black
16fed06ba1
Adding dynamic freq_range for Icoms stage2
2020-03-08 23:18:33 -05:00
Michael Black
df1b7620db
Adding dynamic freq_range for Icoms
2020-03-08 10:09:37 -05:00
Michael Black
c21fdf3747
Beginning implementation of dynamic detection of freq_range for Icom rigs
2020-03-08 09:23:11 -05:00
Michael Black
53b1a93431
Fix icom_rig_open return for RIG_OK
2020-03-07 22:00:15 -06:00
Michael Black
117379f42e
Add VFO_A set to IC9700 type Icom rigs
2020-03-06 22:19:03 -06:00
Michael Black
57c7f2a19f
astyle files
2020-03-05 23:49:22 -06:00
Michael Black
30a8a690ca
Fix IC9700 return to VFOA when in split instead of Main
2020-03-05 17:22:51 -06:00
Michael Black
59e92ab829
Fix set_split_vfo for IC9700 and similar rigs
2020-03-05 15:31:56 -06:00
Michael Black
6493d71e1b
Fix spelling error in icom.c
2020-03-05 14:31:19 -06:00
Michael Black
837006d87b
Fix 'S 1 Sub' for icom rigs with A/B only
2020-03-05 10:45:19 -06:00
Michael Black
d856248178
Add RIG_MODEL macro and change all rigs to support it
2020-03-05 08:44:18 -06:00
Michael Black
39ac8e7be2
Fix set_vfo when asking for Main/Sub on rig that doens't have Main/Sub
2020-03-03 15:30:14 -06:00
Michael Black
7609efbe5a
Fix cppcheck warnings in icom.c
2020-03-01 23:01:24 -06:00
Michael Black
48833e2263
Update icom.c
2020-03-01 15:51:03 -06:00
Michael Black
8096f848fa
Add logic to update tx_vfo for ic9700 when satmode is turned on/off
2020-03-01 09:00:16 -06:00
Michael Black
8981201e4b
Add ic9700 logic to set_vfo_curr
2020-03-01 08:11:07 -06:00
Michael Black
b0fcd87f7f
Add satmode rig logic to set_split_freq
2020-02-29 16:24:31 -06:00
Michael Black
e55e1feb86
Add satmode detection to rig_get_split_vfos
2020-02-29 14:59:24 -06:00
Michael Black
1bc024e73e
Add set_vfo to return satmode rigs to original vfo
2020-02-29 14:27:26 -06:00
Michael Black
af09b043ea
Change satmode rig split_get_freq to return to starting VFO
2020-02-29 14:09:54 -06:00
Michael Black
d631b2d215
Potential fix for SATMODE rigs to leave VFO on Main
2020-02-29 13:36:50 -06:00
Michael Black
013b0b655e
Add Main/Sub split clause for IC9700 and presumably other rigs with satmode
2020-02-28 17:29:49 -06:00
Michael Black
539df1624d
Trying to get IC9700 split working with WSJTX
...
Changed get_split_vfos to recognize priv->split_on
2020-02-28 17:02:12 -06:00
Michael Black
e03dd0af47
Fix cppcheck warning in icom.c
2020-02-24 10:24:34 -06:00
Michael Black
ff8ddf018c
astyle all C files
2020-02-23 11:26:09 -06:00
Michael Black
1550a04716
IC-9700 (and any other dual VFO Icom rig) now works with gpredict
...
Added some future priv items for possible better i/o with the rig handling frequency changes
2020-02-23 07:50:41 -06:00
Michael Black
e4c21c491a
Add logic for ic9700 reversing Main/Sub bands
2020-02-21 18:06:24 -06:00
Michael Black
d4d3c2bdf7
Ensure Main/Sub is set for icom_get_split_vfos
2020-02-21 17:10:42 -06:00
Michael Black
777882e3d6
Implement satmode for icom rigs in icom_get_split_vfos
2020-02-21 15:45:05 -06:00
Michael Black
4c41f8cb04
Fixing icom Main/Sub problem where some software asks for Main/Sub
...
and the rig does not have Main/Sub. Now maps Main/Sub to A/B.
May be more places these needs to be done.
2020-02-21 09:46:00 -06:00
Michael Black
14809b6d43
Remove unneeded code from icom_set_split_
2020-02-19 23:51:43 -06:00
Michael Black
af039f684e
Trying to fix set_split_freq for ic9700 satmode
2020-02-19 23:24:28 -06:00
Michael Black
1979b99574
Fix VFO_DUAL macro
2020-02-18 23:44:02 -06:00
Michael Black
e315f5e3ac
Added skeleton for new get_ant function that will return ant_tx and ant_rx if known
...
Every rig will need to be reviewed to fill these in as appropriate
2020-02-18 23:10:14 -06:00
Michael Black
5f311c1b3f
Fix debug statement
2020-02-16 23:32:44 -06:00
Michael Black
1371e200e1
Add RIG_VFO_CURR to icom_set_split_vfo
2020-02-16 23:11:22 -06:00
Michael Black
8c11893a21
Fix icom_set_split_freq to allow for RIG_VFO_CURR request
2020-02-15 23:20:31 -06:00
Michael Black
28e4311d7f
Add error condition in set_split_vfo in icom.c
2020-02-13 23:25:11 -06:00
Michael Black
4d3cd7b0ab
Add VFO_MAIN capability to set_split_vfo
2020-02-13 23:19:07 -06:00
Malcolm Herring
18153de3b4
additional error checking for extended operations
2020-02-13 16:08:16 +00:00
Michael Black
a85160b1b9
Fix icom get_ant return value
2020-02-12 12:23:55 -06:00
Michael Black
49aa7d00a7
Fix get_ant RIG_ANT_CURR logic
2020-02-12 07:20:34 -06:00
Michael Black
7358cd02f8
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2020-02-11 17:05:51 -06:00
Michael Black
3afdd14b36
Fix spelling error
2020-02-11 17:04:06 -06:00
Malcolm Herring
e3cef196f7
add g/set_ext_func to API
2020-02-11 09:48:13 +00:00
Michael Black
d6f06db7b9
Add custom get_ant for IC-785x
2020-02-07 17:17:08 -06:00
Michael Black
f565eac0a8
Make icom set_ant do a 2-step process to set rx option first, then set antenna
2020-02-06 06:48:32 -06:00
Michael Black
fdef21f068
Merge pull request #193 from mdblack98/master
...
2020-02-05 Patches
2020-02-05 23:24:48 -06:00
Dawid Szymanski
c6e06bfb01
ICOM Voice Keyer implemented.
2020-02-06 01:00:34 +01:00
Michael Black
8958e1419b
Fix Icom get_ant to use 0x12 without option to ask for specific antenna
2020-02-05 15:57:56 -06:00
Michael Black
6066b66799
remove ant_count from icom_rig_init..causes segfault
2020-02-03 22:46:15 -06:00
Michael Black
de637003e9
Removed debug
2020-02-03 16:06:34 -06:00
Michael Black
8e63c6a21d
Remove get_anant_count as 7851 does not have ability to determine # of antennas
2020-02-03 11:30:49 -06:00
Michael Black
28dad4f15f
Bump up priv_cap->ant_count before calling rig_get_ant
2020-02-02 17:05:52 -06:00
Michael Black
7e8938ae65
Changed y command to now use mandatory antenna argument
...
Put a looplimit on icom_get_ant_count trying to get autodetect to work
Changes to icom_get_ant_count to try and get this working
Added dummy antenna # args to rigs that don't care i.e. only have 1 antenna
2020-02-02 08:38:10 -06:00
Michael Black
12e93dd603
Fix antenna count in icom.c
2020-01-31 12:25:50 -06:00
Michael Black
60215785e1
Changes to get antenna calls working in rigctld
...
Change to ic785x.c to get antenna calls working
Added automatic detection of # of antennas for Icom rigs
Note that rig_get_ant returns a zero-based antenna# and not RIG_ANT1/2/3/4....
rig_set_ant on the other hand takes RIG_ANT1/2/3/4 as the argument for antenna
These RIG_ANT settings are a bit mask
This may have to be converted in the rig back end to whatever the rig expects
2020-01-30 12:12:13 -06:00
Michael Black
42108f9638
Change icom_get_usb_echo_off to use 0x03 instead of 0x19 since not all rigs provide 0x19
2020-01-28 12:07:11 -06:00
Michael Black
d0ebb52593
Removed some debug
2020-01-28 08:24:31 -06:00
Michael Black
2e41b8e030
Change ic785x priv_caps to non-const as we are putting in some dynamic caps now
...
Will have to change all other icom rigs too
2020-01-28 08:20:41 -06:00
Michael Black
203c94fa4a
Fix get_ant/set_ant commands to work with 1 or 2 byte responses in icom rigs
2020-01-27 17:33:01 -06:00
Michael Black
4c9df1624b
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2020-01-23 11:56:35 -06:00
Michael Black
d853c36fb3
Change get_ant to add another option for icom rigs (and others if needed)
2020-01-21 17:53:12 -06:00
Malcolm Herring
a656ff580a
New custom parm implementations
2020-01-21 10:44:40 +00:00
Malcolm Herring
9bff33896e
new directory structure
2020-01-18 15:31:23 +00:00