Mike Black W9MDB
c1c1f1f053
Change rig_set_split_mode to disable/enable ptt by rig model as needed
...
https://github.com/Hamlib/Hamlib/issues/838
2021-11-03 08:16:39 -05:00
Mike Black W9MDB
9842cdb1f3
Some minor changes to serial.c as we progress to a faster method
...
https://github.com/Hamlib/Hamlib/issues/850
2021-11-02 11:17:19 -05:00
Mike Black W9MDB
8fe190d622
Reduce error messages about RIG_VFO_OTHER which only applies to some rigs like Icom rigs with the 0x25 command
...
Add a flush_flag to read_string so that the new serial_flush will not produce a timeout value when flushing
https://github.com/Hamlib/Hamlib/issues/835
2021-11-01 23:43:45 -05:00
Mike Black W9MDB
603223d493
During rig_set_split_mode and non-targetable mode we will turn off split, set mode, and turn split back on. This should prevent some ugly flashing on Yaesu rigs
...
https://github.com/Hamlib/Hamlib/issues/838
2021-11-01 22:15:50 -05:00
Mike Black W9MDB
dc585776fc
Add rig pointer to hamlib_port_t
2021-10-30 08:53:45 -05:00
Mike Black W9MDB
84fb123202
Pass empty stopset to read_string so it can determine appropriate stopset for async data
2021-10-30 08:22:55 -05:00
Mike Black W9MDB
44871f7e9b
Change serial_flush to read any buffered data instead of flushing.
...
Perhaps to support transceive mode
2021-10-29 17:48:43 -05:00
Mike Black W9MDB
1ed398466d
Revert "Change serial_flush to read data instead of TCFLUSH"
...
Was causing timing problems
This reverts commit d28f440968
.
2021-10-29 14:38:40 -05:00
Mike Black W9MDB
f071adac8f
Revert "Revert "Revert "Fix hex print in serial_flush"""
...
Straighening out these reverts
This reverts commit b2646f54a4
.
2021-10-29 14:38:14 -05:00
Mike Black W9MDB
b2646f54a4
Revert "Revert "Fix hex print in serial_flush""
...
Was causing timing problems
This reverts commit bf2867021e
.
2021-10-29 14:33:31 -05:00
Mike Black W9MDB
bf2867021e
Revert "Fix hex print in serial_flush"
...
Was causing timing problems
This reverts commit 4a18fa2282
.
2021-10-29 14:33:08 -05:00
Mike Black W9MDB
4a18fa2282
Fix hex print in serial_flush
2021-10-29 11:43:41 -05:00
Mike Black W9MDB
d28f440968
Change serial_flush to read data instead of TCFLUSH
...
This is for the future to enable transceive mode on rigs
2021-10-29 11:24:16 -05:00
Mike Black W9MDB
9d2aaa00c0
Disallow set_split_vfo when PTT is active
...
https://github.com/Hamlib/Hamlib/issues/844
2021-10-28 09:49:18 -05:00
Mike Black W9MDB
6f82645ee8
Revert "Disallow set_split_vfo when ptt is active"
...
Had other temporary code in it
This reverts commit db9cd44bcf
.
2021-10-28 09:46:52 -05:00
Mike Black W9MDB
db9cd44bcf
Disallow set_split_vfo when ptt is active
...
https://github.com/Hamlib/Hamlib/issues/844
2021-10-28 09:44:57 -05:00
Mike Black W9MDB
d18c3a8111
Fix cppcheck warning in network.c
2021-10-24 00:03:48 -05:00
Mike Black W9MDB
5cdbdd04c6
Add rig backends in 0 range (maingly FlRig and rigctld) to targetable_ptt -- should avoid some vfo swapping going on
...
https://github.com/Hamlib/Hamlib/issues/836
2021-10-22 17:15:35 -05:00
Mike Black W9MDB
1ca3d34010
Change Yaeus send_voice_mem to built-in function rather than FUNC implementaion
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-22 07:29:27 -05:00
Mike Black W9MDB
014219c4ad
Add RIG_OTHER_VFO handling to rig_get_cache
...
https://github.com/Hamlib/Hamlib/issues/835
2021-10-21 22:31:38 -05:00
Mike Black W9MDB
c9d7a924c7
Add RIG_FUNC_SEND_VOICE_MEM with FT991 as the 1st implementation
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-21 17:36:54 -05:00
Mike Black W9MDB
024f7f061c
Add RIG_MODE_IQ for FunCube Pro Plus and RS-HFIQ
...
https://github.com/Hamlib/Hamlib/issues/829
2021-10-18 23:01:38 -05:00
Mike Black W9MDB
7f1faf24c0
Add a few more modes to the mode_map
2021-10-16 10:14:03 -05:00
Mike Black W9MDB
a8a317f6ab
Move parse_mode error message to the function itself
2021-10-16 09:45:24 -05:00
Mike Black W9MDB
dc70e2a41f
Fix LSB/USB in rigctl_parse_mode
2021-10-16 09:27:04 -05:00
Mike Black W9MDB
4462fe423e
Add USB-D and LSB-D to mode_map for Log4OM mode requests
2021-10-16 09:20:24 -05:00
Mike Black W9MDB
8a983cae80
Clean up MUTEX declarations in rig.c
2021-10-14 23:06:57 -05:00
Mike Black W9MDB
da34930ab9
Fix rig_get_mode cache time printout
2021-10-14 11:36:34 -05:00
Mike Black W9MDB
ac43daa998
Add some more elapsed time monitoring
2021-10-14 11:32:30 -05:00
Mike Black W9MDB
d90d3eb0d0
Use EAGAIN error to retry when serial port is unavailable
...
https://github.com/Hamlib/Hamlib/issues/818
2021-10-10 08:33:31 -05:00
Mike Black W9MDB
4b77fc1eb3
Allow for EBUSY return during port read and retry 10x5ms for 50ms total before returning an error
...
https://github.com/Hamlib/Hamlib/issues/818
2021-10-08 23:58:07 -05:00
Mike Black W9MDB
2319d17389
Fix rigs so that VFOB/A split works as well as VFOA/B
...
https://github.com/Hamlib/Hamlib/issues/745
2021-10-08 23:55:48 -05:00
Mike Black W9MDB
dd1376becf
Fix debug statement
...
https://github.com/Hamlib/Hamlib/issues/812
2021-09-28 23:13:37 -05:00
Mike Black W9MDB
da87903e3c
Fix set_vfo for non TARGETABLE_FREQ rigs like the FT100
...
Was not setting VFOB when requested
https://github.com/Hamlib/Hamlib/issues/812
2021-09-28 23:03:56 -05:00
Mike Black W9MDB
7c42d6ddb0
Fix LOCK macros
2021-09-28 23:03:06 -05:00
Mike Black W9MDB
43251254c5
New mutex macros to be resued across all rig functions to support async multicast actions
2021-09-28 22:57:35 -05:00
Mike Black W9MDB
7bd407beda
Add some more elapsed time entries and reduce ELAPSED2 macro
2021-09-25 23:26:49 -05:00
Mike Black W9MDB
2e2543a0fc
Fix ELAPSED2 time
2021-09-25 23:16:08 -05:00
Mike Black W9MDB
cc5010d0e3
Add otherVFO to misc.c
2021-09-25 11:45:42 -05:00
Mike Black W9MDB
0b9b719997
Add elapsed time macros and put in vfo and freq calls
2021-09-25 08:59:57 -05:00
AuroraRAS
1c3250f6f4
add androidsensor rotator
...
The androidsensor rotator is not a real rotator, it uses the accelerometer sensor and magnetic field sensor of the cell phone or tablet to perform attitude determination for your antenna and the phone tied to it.
Now you can wave your antenna to find radio signals.
Signed-off-by: AuroraRAS <chplee@gmail.com>
2021-09-25 09:51:11 +08:00
Wouter van Gulik
a3ab4a4312
Fix rig_cookie: use lock for reads and write.
...
Ensure we never print more then HAMLIB_COOKIE_SIZE otherwise we read
out-of-bounds.
Drop stray printf.
Add tests for invalid input and overly large input.
Fix test2 to release the cookie.
2021-09-20 22:10:55 +02:00
Wouter van Gulik
d9e1f5aac4
Fix and document rig_cookie;
...
Example in doxygen was wrong.
Description of parameters was wrong; we return an int so we cannot return
a NULL.
NULL check for cookies is needed for all 3 commands so move it up, fixing the
missing one.
Length check was wrong; cookie needs to be at least as large as
HAMLIB_COOKIE_SIZE otherwise subsequent checks will always faila
Document the 3 cookie commands a bit.
2021-09-19 22:52:41 +02:00
Wouter van Gulik
82785f81dc
Replace RIG_EIO with RIG_EINVAL when checking arguments. RIG == NULL is
...
an argument error. A rig not properly inited (caps == NULL) is also an
invalid argument.
2021-09-19 22:18:03 +02:00
Wouter van Gulik
f029769fb7
Add arguments check for rig_get_cache, rig_stop_morse, rig_wait_morse,
...
rig_get_range, rig_set_vfo_opt, rig_get_infget_info.
2021-09-19 22:12:21 +02:00
Mike Black W9MDB
388294c3d6
Fix RIG_STATUS_STABLE misspelling
2021-09-15 13:50:31 -05:00
Mike Black W9MDB
8cc59cca3b
Rigs have been at BETA status forever so promoting all to STABLE
2021-09-15 13:44:42 -05:00
Mike Black W9MDB
61785075d3
Reduce scope of some vars in sprintflst.c
2021-09-15 10:24:42 -05:00
Mike Black W9MDB
d60e82c222
Reduce scope of vars in rig.c
2021-09-13 17:41:53 -05:00
Mike Black W9MDB
c008f2aa59
Make remove_opened_rig arg in rotator.c const
2021-09-13 17:39:20 -05:00
Mike Black W9MDB
16263e8338
Remove shadow var from rig.c
2021-09-13 17:38:37 -05:00
Mike Black W9MDB
5f8be97e26
Fix rot_strstatus to use ulong instead of int in sprintflst.c
2021-09-11 11:38:44 -05:00
Mike Black W9MDB
846e12ce61
Fix debug statement in register.c
2021-09-11 11:29:00 -05:00
Mike Black W9MDB
6a13d40b9a
Reduce scope of var in network.c
2021-09-11 11:24:12 -05:00
Mike Black W9MDB
cc886b46f5
Make parse_hoststr delcaration match implementation
2021-09-11 11:13:23 -05:00
Mike Black W9MDB
6216d8a2b8
Add some const declarations to microham.c
2021-09-11 11:10:30 -05:00
Mike Black W9MDB
e88ef72003
Reduce scope of var in misc.c
2021-09-11 11:04:13 -05:00
Mike Black W9MDB
b02ea818de
Add const declaration to amplifier.c
2021-09-11 10:44:28 -05:00
Michael Black
196884e3b1
Merge pull request #790 from AuroraRAS/keepgoingndk
...
Fix compile-time errors in Android NDK environment
2021-09-10 23:31:51 -05:00
Wouter van Gulik
fe2f24cba3
Make make_crc_table and gen_crc static.
2021-09-09 22:47:57 +02:00
Wouter van Gulik
720f8fa86e
Fix documentation for get_info. Memory is not allocated!
...
Prevent users from trying to free it.
2021-09-09 22:42:55 +02:00
Wouter van Gulik
3edc59dbd2
Add documentation for rig_get_cache.
...
Note that it misses all sanity check on the input, but at least that is
now documented.
Made rig_check_rig_caps and twiddling static, they are not exported
but Doxygen includes all globally visible function.
2021-09-09 22:36:43 +02:00
Wouter van Gulik
d6c1c4ec78
rig.c/rig_reset Make defines a link in the documentation
2021-09-09 22:15:16 +02:00
Wouter van Gulik
9134fa55c9
rig.c: Fix Doxygen for rigerror
2021-09-08 22:57:04 +02:00
Wouter van Gulik
998e19bdd4
Fix Doxygen in rig.c. Commit c5c60f0
also touched Doxygen comments which
...
was not intended. It replaced \return with \RETURNFUNC. Breaking
Doxygen.
2021-09-08 22:45:36 +02:00
AuroraRAS
b5bd1f4036
Append the missing information to build hamlib v4.3 for Android NDK
...
The following errors were fixed in this commit:
error: undefined symbol: rig_sprintf_vfo
error: undefined symbol: initrots2_radant
error: undefined symbol: ts890s_caps
2021-09-07 21:30:09 +08:00
Mike Black W9MDB
c53a288cd8
Add debug to show vfofixup being skipped due to satmode rig
2021-09-06 07:41:33 -05:00
Mike Black W9MDB
820e4d4310
Fix compilation of misc.c with gmtime_r replacement function for mingw
...
https://github.com/Hamlib/Hamlib/issues/784
2021-09-02 17:08:10 -05:00
Mike Black W9MDB
6de4588335
Do not do vfo_fixup on satmode rigs
...
https://github.com/Hamlib/Hamlib/issues/782
2021-09-01 12:45:29 -05:00
Mike Black W9MDB
9032e3e58b
Improve ser_open error message
2021-08-30 10:01:36 -05:00
Mike Black W9MDB
f65022b4ca
If set_split_freq_mode is called when split=off we'll turn on split based on current vfo selection
...
https://github.com/Hamlib/Hamlib/issues/764
2021-08-30 08:45:56 -05:00
Mike Black W9MDB
f552e3f0e8
Fix set_split_vfo to use correct RX vfo instead of TX vfo
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-28 09:54:37 -05:00
Mike Black W9MDB
4653aa2f6e
astyle files
2021-08-27 22:25:53 -05:00
kacomet
574f22b096
Corrected modes for FT-736R. The FT-736 supports SSB, CW, FM, FM-N (narrowband FM,) CW-N (narrowband CW.) Now, the FM-N and CW-N modes can be set from rigctl. Passbands have also been corrected to the values in the manual.
2021-08-27 19:41:38 -05:00
Mike Black W9MDB
b41f706eda
Fix uninitialized warning in rig.c
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 15:51:02 -05:00
Mike Black W9MDB
f6b54df7c7
Fix some more unnecessary vfo swapping
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 15:46:23 -05:00
Mike Black W9MDB
5a0590d421
Finish up targetable_ptt logic
...
Was causing unnecessary vfo swapping
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 12:50:53 -05:00
Mike Black W9MDB
0016d5a933
Move TARGETABLE_PTT logic to the set_ptt routine
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 12:32:37 -05:00
Mike Black W9MDB
0d9bcbf9bf
Fix possilbe segfault last patch
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 12:16:35 -05:00
Mike Black W9MDB
03fe6f6500
Allow all Icom, Kenwood, Yaesu to avoid VFO swapping
...
https://github.com/Hamlib/Hamlib/issues/762
https://github.com/Hamlib/Hamlib/issues/430
2021-08-27 12:04:16 -05:00
Mike Black W9MDB
283281c4cb
astyle all files preparing for 4.3 release
2021-08-26 06:49:24 -05:00
Wouter van Gulik
9aec383329
Simplify get_ant by having setting to unknown by default.
...
Drop setting to default in rigs.
Add some more documentation on get_ant.
2021-08-25 22:13:21 +02:00
Mike Black W9MDB
851c499376
Fix lack of error for some bad rig numbers. e.g. rigctl -m 228 produced hash collision error instead of unknown rig
...
https://github.com/Hamlib/Hamlib/issues/735
2021-08-23 23:19:12 -05:00
Mike Black W9MDB
b2acf0b6f5
Improve debug in ser_open
2021-08-21 22:38:44 -05:00
Mike Black W9MDB
0be978abcd
Add more retries to PTT serial port open
...
https://github.com/Hamlib/Hamlib/issues/768
2021-08-21 22:31:15 -05:00
Michael Black
a396dc8825
Merge pull request #772 from wutje/constify
...
rig.c: Constify rigerror_table
2021-08-21 16:00:15 -05:00
Wouter van Gulik
95a10624c1
src/misc.c: Constify some tables
2021-08-21 22:48:02 +02:00
Wouter van Gulik
b24e629e16
rig.c: Constify rigerror_table
2021-08-21 22:26:59 +02:00
Wouter van Gulik
84108f9613
src/rig.c: Add comments to clarify both mode and width must be supplied
2021-08-21 21:59:02 +02:00
Mike Black W9MDB
ad53f2f1e3
Fix typo in serial.c
...
https://github.com/Hamlib/Hamlib/issues/768
2021-08-21 07:41:48 -05:00
Mike Black W9MDB
c6151c7110
Fix error in serial.c
...
https://github.com/Hamlib/Hamlib/issues/768
2021-08-20 22:31:11 -05:00
Mike Black W9MDB
df40151d65
Add additional attempts to open serial port
...
K4 was failing on 1st open for some unknown reason but succeeds on 2nd try
https://github.com/Hamlib/Hamlib/issues/768
2021-08-20 22:29:12 -05:00
Mike Black W9MDB
d52cce510d
Add fallback serial open logic to hopefully cure serial port open error with K4
...
https://github.com/Hamlib/Hamlib/issues/768
2021-08-16 22:49:36 -05:00
Mike Black W9MDB
0a0873252e
Fix CodeQL warnings
2021-08-13 12:28:58 -05:00
Mike Black W9MDB
014bc04ddf
Fix Icom rigs to use 0x25 command if capable
...
Fixes #1 and and #2 in the issue
https://github.com/Hamlib/Hamlib/issues/762
2021-08-13 07:42:39 -05:00
Mike Black W9MDB
ad43cd793a
Fix MULTICAST boolean logic
2021-08-11 23:10:44 -05:00
Mike Black W9MDB
45d1162362
Improve debug message in iofunc.c on serial port error
2021-08-09 08:46:05 -05:00
Mike Black W9MDB
1a64f26ea0
Add RETURNFUNC in register to see timing
2021-08-08 16:43:05 -05:00
Mike Black W9MDB
f8974c1e86
Implment FTDX101D/MP FTDX9000 METER_TEMP
...
https://github.com/Hamlib/Hamlib/issues/755
2021-08-02 23:55:24 -05:00
Mike Black W9MDB
4bfd71f91f
Fix Icom split and implement reverse split
...
These should work now from rigctl and via the API
S VFOB 1 VFOA
S Sub 1 Main
https://github.com/Hamlib/Hamlib/issues/754
2021-08-02 23:37:31 -05:00
Mike Black W9MDB
592ca86fc6
Allow Main/Sub to be returned from vfo_fixup
2021-08-01 12:11:46 -05:00
Mike Black W9MDB
68336fedfa
Add 2nd rotator port to rotator_open for RT21 elevation controller
...
https://github.com/Hamlib/Hamlib/issues/747
2021-07-23 23:07:18 -05:00
Mike Black W9MDB
7d5fa7dc88
Add new xml tag to flrig for identifying the client...will help debugging.
2021-07-21 22:59:53 -05:00
Mike Black W9MDB
cb892602b4
Do not change TX_VFO when VFO_B is passed to vfo_fixup and split is off
...
https://github.com/Hamlib/Hamlib/issues/741
2021-07-15 15:59:28 -05:00
Mike Black W9MDB
26dffeef4d
Fix misc.c vfo_fixup to not change VFOB when VFOB requested
...
https://github.com/Hamlib/Hamlib/issues/741
2021-07-15 15:50:22 -05:00
Mike Black W9MDB
a6d91eb8a8
Change vfo_fixup to default to VFO_A when not in split mode
...
Was staying on VFO_B when VFO_B was requested
https://github.com/Hamlib/Hamlib/issues/741
2021-07-15 15:32:32 -05:00
Mike Black W9MDB
2c57bc51d5
Reduce unnecessary warning messages in rig.c
2021-07-13 15:49:15 -05:00
Mike Black W9MDB
91b3d26837
For all rigs avoid setting mode while PTT is on
...
https://github.com/Hamlib/Hamlib/issues/737
2021-07-12 08:57:02 -05:00
Mike Black W9MDB
4f500ae8e8
Back out change to register.c
2021-07-09 06:46:38 -05:00
Mike Black W9MDB
b83b8aba60
register.c now correctly burps when bad model# is used
...
https://github.com/Hamlib/Hamlib/issues/735
2021-07-08 12:50:28 -05:00
Mike Black W9MDB
53adea283c
Fix regsiter.c so c++ make check works
...
Another solution to this needed
https://github.com/Hamlib/Hamlib/issues/735
2021-07-08 11:56:10 -05:00
Mike Black W9MDB
cc089335b0
Adjust RIG_BACKEND_NUM in register.c so it can detect bad rig numbers
...
https://github.com/Hamlib/Hamlib/issues/735
2021-07-08 11:26:11 -05:00
Mike Black W9MDB
21ade6493a
Add MainA/B and SubA/B to dummy rig for testing
...
Add debug cache display for same when applicable
https://github.com/Hamlib/Hamlib/issues/730
2021-07-05 11:24:07 -05:00
Mike Black W9MDB
217a978ab9
Fix split control for K3 and probably other rigs too
...
https://github.com/Hamlib/Hamlib/issues/728
2021-06-24 23:41:50 -05:00
Mike Black W9MDB
b340d594f0
Re-enable rig_flush due to command stacking occurring on K3 (and probably others)
...
https://github.com/Hamlib/Hamlib/issues/728
2021-06-22 10:53:28 -05:00
Mike Black W9MDB
beede15b7b
Change debug a bit in rig.c
2021-06-16 10:35:38 -05:00
Mike Black W9MDB
c72517eafa
Move loop declaration outside the for statement in rig.c
...
Also got rigctld working with WSJTX -- but not JTDX yet
https://github.com/Hamlib/Hamlib/issues/721
2021-06-16 10:13:45 -05:00
Mike Black W9MDB
7b1ad09aed
Fix retcode compilation warning
2021-06-13 16:18:46 -05:00
Mike Black W9MDB
6dacfa53c0
Avoid nested calls in rigctld
...
https://github.com/Hamlib/Hamlib/issues/721
2021-06-12 11:04:10 -05:00
Mike Black W9MDB
ff9a745c7a
Wrap pthread calls in #ifdef HAVE_PTHREAD in rig.c
2021-06-04 10:03:40 -05:00
Mike Black W9MDB
b65fdb61f8
Fix get_rig_conf_type export
2021-06-04 09:59:31 -05:00
Mike Black W9MDB
a73046b04e
Clean up clang-static-analyzer warnings
2021-06-03 17:21:52 -05:00
Mike Black W9MDB
7d8e99ca2d
Fix ICOM UDP network setup
2021-06-02 23:06:22 -05:00
Mike Black W9MDB
53476dd14d
Remove some more debug
2021-06-01 07:19:00 -05:00
Mike Black W9MDB
a63d009035
Remove some more debug
2021-06-01 07:17:11 -05:00
Mike Black W9MDB
c5378b9f70
Remove some more debug
2021-06-01 07:10:44 -05:00
Mike Black W9MDB
9755454ff8
Fix Icom UDP server check
2021-05-31 17:42:07 -05:00
Mike Black W9MDB
97e36926d3
Enable UDP network for Icom rigs
2021-05-31 09:05:41 -05:00
Mikael Nousiainen
3a67356bc1
Add some comments and improved debugging on SIGIO async data handling
2021-05-31 16:22:22 +03:00
Mikael Nousiainen
263c16984a
Attempt to handle asynchronously pushed Icom CI-V frames (transceive and spectrum data) as these frame will get interleaved with command responses
2021-05-30 01:36:49 +03:00
Mike Black W9MDB
903df5cb95
Fix RIG_FLUSH_REMOVE #ifdef -- duh....
...
https://github.com/Hamlib/Hamlib/pull/712
2021-05-27 09:01:48 -05:00
Mike Black W9MDB
3c50d53273
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2021-05-27 07:55:59 -05:00
Mike Black W9MDB
7913de79e1
Allow testing removal of rig_flush()
...
https://github.com/Hamlib/Hamlib/pull/712
2021-05-27 07:35:46 -05:00
Mikael Nousiainen
12527581b0
Add SPECTRUM_ATT level (also supported by Kenwood rigs). Get VFO frequency for Icom spectrum edge ranges (if not cached). Fix preamp levels based on docs. Add supported AGC levels to recent Icom rigs.
2021-05-27 10:12:01 +03:00
Mikael Nousiainen
a7de662937
Merge branch 'master' into initial-spectrum-scope-support
2021-05-26 23:41:38 +03:00
Mikael Nousiainen
b4ba22d369
Implemented initial abstraction for spectrum scope data and support for Icom spectrum data output. The abstraction is based on common features of both Icom and Kenwood rigs. Added TRANSCEIVE func and enumeration of supported AGC levels. Work in progress.
2021-05-26 23:40:53 +03:00
Mike Black W9MDB
a419ad0c4b
Fix spellilng error in export statement -- to quick to commit
...
https://github.com/Hamlib/Hamlib/issues/710
2021-05-26 13:12:44 -05:00
Mike Black W9MDB
0f5995aaf5
Change export to HAMLIB_EXPORT_VAR
...
https://github.com/Hamlib/Hamlib/issues/710
2021-05-26 13:07:11 -05:00
Mike Black W9MDB
8ded4461c2
Fix export of cookie_use for DLL linkage
...
https://github.com/Hamlib/Hamlib/issues/710
2021-05-26 12:50:30 -05:00
Mike Black W9MDB
d2f7957e8b
astyle rig.c
2021-05-26 09:30:02 -05:00
Mike Black W9MDB
ca6692c022
Reduce cache verbosity to only when DEBUG_CACHE is asked for
...
Fix rig_get_rig_info -- it was adding binary CRC to the result
2021-05-26 09:05:38 -05:00
Mike Black W9MDB
f08881613e
Change another ECONF to EINVAL
...
https://github.com/Hamlib/Hamlib/issues/650
2021-05-25 10:24:00 -05:00
Mike Black W9MDB
552fd6159b
Change power2mw ECONF error to EINVAL
...
https://github.com/Hamlib/Hamlib/issues/650
2021-05-25 10:22:52 -05:00
Mike Black W9MDB
8e63ce7a36
Add multicast thread -- the intent is that this will always run
...
https://github.com/Hamlib/Hamlib/issues/695
2021-05-25 09:29:27 -05:00
Mike Black W9MDB
556304d455
Merge branch 'master' of https://github.com/Hamlib/Hamlib
2021-05-25 09:19:33 -05:00
Mike Black W9MDB
70482d0afa
Add cookie_use flag
...
https://github.com/Hamlib/Hamlib/issues/695
2021-05-25 09:17:25 -05:00
Mike Black W9MDB
238265f2ac
Initialize CM108 pathname, rigport, and pttport in rig_init too
...
https://github.com/Hamlib/Hamlib/issues/673
2021-05-24 07:31:02 -05:00
Mike Black W9MDB
3e4ff69b96
Add multicast_item_e and change multicast_server API
...
https://github.com/Hamlib/Hamlib/issues/695
2021-05-23 07:40:08 -05:00
Mike Black W9MDB
d6b54f491e
export network_multicast_server for DLL linkage
...
https://github.com/Hamlib/Hamlib/issues/710
2021-05-22 12:38:40 -05:00
Mike Black W9MDB
54e3efb466
Change random() to rand in rig_cookie -- some compilers are complaining about random being undefined
...
https://github.com/Hamlib/Hamlib/issues/710
https://github.com/Hamlib/Hamlib/issues/695
2021-05-21 22:22:36 -05:00