The Attenuator/Preamp has been added: not all the LNA values have been
added because Hamlib can only have maximum 8 values and FUNcube has
more.
The RSSI readout is performed on the IF and it is not calibrated. To
calibrate it, it would be necessary to read all the gains in the
complete chain to compute the real RSSI.
The driver now also supports firmware versions 1.x.
Author: Stefano Speretta, Innovative Solutions In Space BV
<s.speretta@isispace.nl>
Signed-off-by: Stefano Speretta <s.speretta@isispace.nl>
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3053 7ae35d74-ebe9-4afe-98af-79ac388436b8
From Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
vx-1700 notes:
==============
* the only possible way to switch from VFO_A to VFO_MEM is a
switching to configured memory channel.
* vfo_op(UP/DOWN) in memory mode switch channel UP/DOWN
correspondingly
* set_mem() in VFO mode do not change memory channel, but only
remember passed value. Thus we may set non-configured memory
channel number for future use in vfo_op(OP_FROM_VFO).
* get_mem() in VFO mode returns last used memory channel value.
It may return non-configured memory channel number passed to
set_mem() previously.
WARNING: VX-1700 CAT Manual have bugs, see comments in code.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3052 7ae35d74-ebe9-4afe-98af-79ac388436b8
Fixed S-Meter read-out: not readings are calibrated in S units
Fixed pre-amp control: now it works under GRig
Signed-off-by: Stefano Speretta <s.speretta@isispace.nl>
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3051 7ae35d74-ebe9-4afe-98af-79ac388436b8
New CSS file, added Doxygen logo to footer, tweaked hamlib.cfg.in for
Doxygen configuration. Minor edits to index.doxygen.
Minor Doxygen edits to rotlist.h and network.c
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3035 7ae35d74-ebe9-4afe-98af-79ac388436b8
The K2 and K3 support a TQ command to query the transmit status. As
only four bytes are returned it is much faster than the longer IF
command response. Access is via rig_get_ext_level--rigctl 'l' command
with a Level mnemonic of 'txst'. Returns '0' on RX and '1' on TX.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3032 7ae35d74-ebe9-4afe-98af-79ac388436b8
Implemented kenwood_cfg_params structure to allow RIT/XIT tokens to be
available to all Kenwood backend rigs (Fine Step and Voice announce are
also defined). K2/K3 rigs can only set/get RIT/XIT.
Updated README.k2/k3 for RIT/XIT functions and prior updates.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3031 7ae35d74-ebe9-4afe-98af-79ac388436b8
Implemented rig_get_ext_level() for the K3 FI command which returns the
last four digits of the IF center frequency. This value changes as the
operator adjusts the shift control, changes mode, or adjusts the bandwidth
control. The function returns the actual frequency of 8210000 Hz plus
the value returned by the FI command.
To get this frequency value the token IFCTR must be passed to
rig_get_ext_level(). This token is specific to the K3 backend.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3029 7ae35d74-ebe9-4afe-98af-79ac388436b8
Rot2Prog is now 901, Rot1Prog 902 per feedback from Magne Mæhre LA1BFA.
Minor update of spid.txt to correct a typo and clarify a point in
the documentation.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3028 7ae35d74-ebe9-4afe-98af-79ac388436b8
This patch extends the SPID driver with support for the Rot1Prog az
rotator controller. It also updates protocol documentation. The driver
has been tested with Rot1Prog and with Rot2Prog for regression.
Submitted by Norvald H. Ryeng <ryeng@users.sourceforge.net). Tracker
info: SPID Rot1Prog rotator driver - ID: 3167384
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3027 7ae35d74-ebe9-4afe-98af-79ac388436b8
Added FUNcube interface to Hamlib. This is a basic FUNcube interface:
at the moment only frequency set/readout is supported. From Stefano
Speretta <s.speretta@isispace.nl>.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3026 7ae35d74-ebe9-4afe-98af-79ac388436b8
Test k2_md_rtty flag when k2_set_mode() is passed RIG_MODE_RTTY or
RIG_MODE_RTTYR to avoid erroneously attempting to set RTTY when
k2_md_rtty is unset.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3024 7ae35d74-ebe9-4afe-98af-79ac388436b8
An oversight had omitted the necessary call to set the K2 to K22
extended mode before setting the filter. The function now sets K22
properly, sets the filter width, and then K20 before returning.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3023 7ae35d74-ebe9-4afe-98af-79ac388436b8
K2 backend will now scan for installed RTTY mode and filters per
mode upon rig_open(). Implemented get/set mode in K2. The get_mode()
function checks the filter bandwith and returns that for the width
value and the set_() function will select and set an appropriate
filter based on the width passed in.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3021 7ae35d74-ebe9-4afe-98af-79ac388436b8
for the latest Yaesu backends (ft9000 and later that use "New CAT"
commands) and set the default "write_delay" parameter to '0' as these
radios deault to assuming a command has been received after 10 mSec of
no data on the wire. The default write_delay had been 50 mSec (for no
good reason except I copied and pasted from older backends) which was
too long as these models implement a CAT TOT (Time Out Timer) of 10 mSec.
git-svn-id: https://hamlib.svn.sourceforge.net/svnroot/hamlib/trunk@3012 7ae35d74-ebe9-4afe-98af-79ac388436b8
Nate Bargmann, N0NB