mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
9 563 Commity
53 Gałęzie
28 Tagi
31 MiB
Wykres commitów

2412 Commity (921cc52eb95cb67cada35a8d68d7f228a50a4479)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 59131c4496 Fix Icom poweron behavior 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-09 12:35:31 -06:00
Mike Black W9MDB 2570c273ab Fix FT-710, FTDX10, FTDX101D/MP 60M operations 
https://github.com/Hamlib/Hamlib/issues/1211
 2023-01-09 10:45:20 -06:00
Mike Black W9MDB eea9901502 Fix get_powerstat status return to always show POWER_ON for kenwood non-PS rigs 
https://github.com/Hamlib/Hamlib/issues/1213
 2023-01-09 10:34:50 -06:00
Mike Black W9MDB 5f9fc933f5 For Icom rigs close and reopen rig after set_powerstat=1 -- Linux resets the usb device 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-09 10:34:39 -06:00
Mike Black W9MDB 0fce421845 Ensure 60M exception for FT710 is only for US language setting 
https://github.com/Hamlib/Hamlib/issues/1211
 2023-01-09 10:34:15 -06:00
Mike Black W9MDB e3926a2e13 Add FT-710 to 60M exception in newcat.c to allow some ability to work with WSJT-X 
https://github.com/Hamlib/Hamlib/issues/1211
 2023-01-09 10:34:02 -06:00
Mike Black W9MDB c653d5effd Update timing in nrd535.c based on testing thanks to markjfine 2023-01-07 22:20:37 -06:00
Mike Black W9MDB 7b2abebeea Fix FTDX3000 EX039 error 
https://github.com/Hamlib/Hamlib/issues/1206
 2023-01-07 17:29:46 -06:00
Mike Black W9MDB 09b71a11d0 Force K22 mode on Elecraft rigs to get PC power level in .1W intervals for low power operations 
https://github.com/Hamlib/Hamlib/issues/1205
 2023-01-07 17:29:30 -06:00
Mike Black W9MDB 3e5080ebff Fix elecraft power2mW by scaling power to either 15W or 100W based on KPA availability 
We are ignoring the tx_range values for the Kn series
https://github.com/Hamlib/Hamlib/issues/1205
 2023-01-06 23:55:20 -06:00
Mike Black W9MDB b9ee776e5b Remove EX039 check from FTDX3000/3000DM 
https://github.com/Hamlib/Hamlib/issues/1206
 2023-01-06 23:55:07 -06:00
Mike Black W9MDB efc2951599 Remove unnecessary check from netrigctl.c 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-06 23:54:52 -06:00
Mike Black W9MDB 23e4eb2885 Fix rigctld agc level readings -- allow for rig backedn to specify "RIG_AGC_NONE" now for clarity if desired 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-06 16:27:03 -06:00
Mike Black W9MDB 41ad82139f Update ID5100 and ID4100 
Promote ID5100 to stable
https://github.com/Hamlib/Hamlib/issues/1204
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1202
 2023-01-04 15:50:49 -06:00
Mike Black W9MDB 7200858735 Get dummy rig to work with grig by disallowing empty "u" calls 2023-01-04 15:48:10 -06:00
Mike Black W9MDB 2f4993cdac Make 3-byte Icom ID rigs show error message 2023-01-04 15:47:56 -06:00
Mike Black W9MDB c20c63c752 Remove XONXOFF flow control from ID5100 and ID4100 -- Firmware E8 is not working correclty that flow control 
https://github.com/Hamlib/Hamlib/issues/1202
 2023-01-04 15:47:40 -06:00
Mike Black W9MDB 247c3670f9 Add PKTUSB to ft1000mp rigs 2023-01-04 15:47:27 -06:00
Mike Black W9MDB f8657f0d4d Fix ID5100 get/set_mode 
Remove ID rigs freq_len check as civ_731 setting should cover it
https://github.com/Hamlib/Hamlib/issues/1204
 2023-01-04 15:47:07 -06:00
Mike Black W9MDB 711b7c9d7e Fix units for get freq for ID5100 ID4100 ID31 ID51 
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-03 22:20:19 -06:00
Mike Black W9MDB 4b57195069 Another attempt to fix get/set freq for ID5100 ID4100 ID31 ID51 
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-03 22:20:02 -06:00
Mike Black W9MDB 780872ed84 Convert Icom 3-byte frequency to Hz from KHz 
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-02 23:30:18 -06:00
Mike Black W9MDB 1199dc2b6b Fix ID5100 ID4100 ID31 ID51 get/set freq 
Remove get_powerstat from ID4100 ID31 ID51 as it they are not capable
Add new rig_is_model function to help with Icom rig identification checks
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-02 11:32:34 -06:00
Mike Black W9MDB c0348a0d27 Remove get_powerstat from Icom ID-5100 -- does not have the ability to get power status 
https://github.com/Hamlib/Hamlib/issues/1201
 2023-01-02 09:00:39 -06:00
Mike Black W9MDB 85c4f73061 Add QRPLabs QCX/QDX for better behavior/capability from ts480 entry 2022-12-31 08:10:29 -06:00
Mike Black W9MDB 7898baf6ed Allow for 36 and 37 byte IF lengths for ic10.c 
This should fix QRP QRDX buggy IF message -- hopefully the fix theirs to send 33 bytes.
https://github.com/Hamlib/Hamlib/issues/1196#issuecomment-1367473810
 2022-12-29 11:38:32 -06:00
Mike Black W9MDB 4f8c9b1f49 astyle newcat.c 2022-12-28 16:39:21 -06:00
Mike Black W9MDB 43e46d49c5 FTDX5000 will now remember startup front/rear setting and restore it 
Will also allow front/rear selection in WSJT-X/JTDX
https://github.com/Hamlib/Hamlib/issues/1195
 2022-12-28 16:39:10 -06:00
Mike Black W9MDB ba079fe7f0 Make FT5000 EX1031;TX1; command two commands 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 16:38:59 -06:00
Mike Black W9MDB 9ad6f24089 Make sure FT5000 is in data mode for PTT request -- returns to MIC mode on shutdown 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 16:38:47 -06:00
Mike Black W9MDB 35946f5d6b FT5000 cannot use RIG_PTT_ON_DATA/MIC menu 103 control and is now set for rear automatically too 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 16:38:35 -06:00
Mike Black W9MDB a3fecb63a2 Change FTDX5000 write_delay to zero -- was causing microham to return ?; to every command 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-12-26 10:23:44 -06:00
Mike Black W9MDB ee96efd5bc Make FTDX5000 return to MIC input on closing 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-23 16:53:48 -06:00
Mike Black W9MDB 0d2fd757bf Remove powerstat from TX-500 -- was always responding PS0; 
https://github.com/Hamlib/Hamlib/issues/1188
 2022-12-20 08:39:15 -06:00
Mike Black W9MDB b041a7f607 Change TX-500 to only have 9600 baud available 
https://github.com/Hamlib/Hamlib/issues/1188
 2022-12-20 08:31:28 -06:00
Mike Black W9MDB ac882ee896 Fix unidirectional rig cached frequency (e.g. FT736R) 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-18 09:04:46 -06:00
Mike Black W9MDB 9f67561d23 Fix kenwood_ts890_get_level -- thanks to N3GB George Baltz 2022-12-15 17:12:58 -06:00
Mike Black W9MDB f0636bc875 Add get_freq cached for FT736R to allow working with gpredict 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-14 11:15:57 -06:00
Mike Black W9MDB 2dd31355fc If get_powerstat fails in any way then always return RIG_POWER_ON 
https://github.com/Hamlib/Hamlib/issues/1189
 2022-12-14 10:08:53 -06:00
Mike Black W9MDB 46f30345b9 If get_powerstat fails assume rig is powered on -- should fix sdr++ problem 
https://github.com/Hamlib/Hamlib/issues/1186
 2022-12-12 23:51:46 -06:00
Mike Black W9MDB 0d4f647da3 Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency 
https://github.com/Hamlib/Hamlib/issues/1185
 2022-12-11 13:57:43 -06:00
Mike Black W9MDB ec5dde91c5 astyle newcat.c 2022-12-11 13:57:32 -06:00
Mike Black W9MDB 75fbd097b1 Remove 9710.c 2022-12-08 09:11:46 -06:00
Mike Black W9MDB 9a1ea33d0e Revert "Add MDS 4710 rig" 
This reverts commit 1e68b06b53.
 2022-12-08 09:08:50 -06:00
Mike Black W9MDB bffec5b528 Revert "Add mds.h to mds/Makefile.am" 
This reverts commit 99627855a2.
 2022-12-08 09:08:05 -06:00
Mike Black W9MDB 4b794bf08f Revert "Split MDS 4710/9710" 
This reverts commit 1a4745a7c2.
 2022-12-08 09:07:29 -06:00
Mike Black W9MDB 6ad428e091 Revert "Change MDS 4710/9710 to Alpha status -- no testing has been done yet" 
This reverts commit 09f83cbfb7.
 2022-12-08 09:01:55 -06:00
Mike Black W9MDB f1464f5a1c Revert "Fix range list in mds.c" 
This reverts commit b4a6f98524.
 2022-12-08 09:01:44 -06:00
Mike Black W9MDB b5e258228e Add missing calibration tables for TS890S 2022-12-07 15:30:38 -06:00
Mike Black W9MDB 6a80385f8b Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-12-05 13:59:55 -06:00