mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
10 836 Commity
58 Gałęzie
32 Tagi
50 MiB
Wykres commitów

2980 Commity (67aee821330f5374353b51cb1f7b0c02712a872f)

Autor SHA1 Wiadomość Data
George Baltz N3GB 00e2797c6f First round of level_gran additions. 
Issue: #1144
 2023-02-26 13:12:52 -05:00
George Baltz N3GB bc476a1c94 ATTenuator level 0 should always be allowed - to turn it off. 2023-02-26 13:12:52 -05:00
George Baltz N3GB f5a1dabd06 Add missing level definitions for TS-590SG 2023-02-26 13:12:52 -05:00
Mike Black W9MDB a9cb121584 Add stop_morse for some Kenwood rigs 2023-02-25 22:11:11 -06:00
Mike Black W9MDB 717dae5027 Fix potential segfault in cmdstr check in kenwood.c 2023-02-21 11:44:12 -06:00
Mike Black W9MDB 514d87dcc9 astyle kenwood.c 2023-02-19 17:01:42 -06:00
Mike Black W9MDB 10ac497c0b Improve response of ;;;;PS1; command 2023-02-19 16:56:51 -06:00
Michael Black 1edb21a38d
Merge pull request #1237 from dforsi/fix/unused-includes 
Remove unused includes and add useful includes
 2023-02-16 12:20:44 -06:00
Daniele Forsi IU5HKX 52be0797d8 [rigs/*] Fix includes 2023-02-16 19:08:24 +01:00
Daniele Forsi IU5HKX 7673abc59b [yaesu] Fix includes 2023-02-16 19:08:24 +01:00
Daniele Forsi IU5HKX 420125b8bc [kenwood] Fix includes 2023-02-16 19:08:24 +01:00
Daniele Forsi IU5HKX 7211730866 [icom] Fix includes 2023-02-16 19:08:24 +01:00
Daniele Forsi IU5HKX d09c048161 [rigs/*] Remove unused include of config.h 2023-02-14 19:57:48 +01:00
Daniele Forsi IU5HKX a04abe6e04 [yaesu] Remove unused include of config.h 2023-02-14 19:30:51 +01:00
Daniele Forsi IU5HKX 5c17054295 [kenwood] Remove unused include of config.h 2023-02-14 19:29:22 +01:00
Daniele Forsi IU5HKX 2e894dd9cc [icom] Remove unused include of config.h 
Found wih "Include What You Use".
 2023-02-14 19:21:18 +01:00
Mike Black W9MDB 9dbe4ef79a Separate the validation cmd in newcat.c to allow rig post_write_delay to be in effect 
https://github.com/Hamlib/Hamlib/issues/1219
 2023-02-14 09:22:50 -06:00
Mike Black W9MDB 58700c6e9f Increase post_write to 20ms for FT710 
https://github.com/Hamlib/Hamlib/issues/1235
 2023-02-12 07:26:28 -06:00
Mike Black W9MDB 4078fa9248 Fix ID5100 S Main 1 Sub 
https://github.com/Hamlib/Hamlib.git
 2023-02-10 16:49:37 -06:00
Mike Black W9MDB 111627533f Changes to support ID-5100 in gpredict. 
Can now set set freq/mode on VFOA/B or Main/Sub correctly automatically switching dual watch mode as needed
 2023-02-10 08:02:48 -06:00
Mike Black W9MDB f9adf5de0a Add attenuator level control for TS890 
Update SMeter/SWR tables for TS890
Thanks to N3GB George Baltz
 2023-02-08 12:02:19 -06:00
Mike Black W9MDB 907a178aa6 Some fixes for th.c operation 
https://github.com/Hamlib/Hamlib/issues/1230
 2023-02-06 16:01:08 -06:00
Mike Black W9MDB 73fc563ceb Add fix for TMD700 
https://github.com/Hamlib/Hamlib/issues/1230
 2023-02-06 15:58:18 -06:00
Mike Black W9MDB cc7c335dc5 Improve FT-857 get_vfo response when error occurs 
This could be FT-857 EEPROM burnout
https://github.com/Hamlib/Hamlib/issues/1232
 2023-02-06 15:14:34 -06:00
Mike Black W9MDB c903c09cd1 Allo FT-857 to return cached vfo when set_vfo is called and EEPROM read error occurs 
https://github.com/Hamlib/Hamlib/issues/1232
 2023-02-06 11:11:17 -06:00
Mike Black W9MDB b037c72c50 Fix AF level control for FTDX10 and FT710 
https://github.com/Hamlib/Hamlib/issues/1231
 2023-02-05 17:28:23 -06:00
Mike Black W9MDB 0e9bdc5d04 Fix spelling error in kenwood.c 2023-02-04 17:08:31 -06:00
Mike Black W9MDB 1efff461e3 Have icom rigs show debug when civ addr has been changed and timeout occurs 
https://github.com/Hamlib/Hamlib/issues/1229
 2023-02-04 14:22:57 -06:00
Mike Black W9MDB c055817c27 Fix FT-450D detection 2023-02-04 06:35:40 -06:00
Mike Black W9MDB fa503c5b3b Change TM-D700 and TM-D710 to hardware flow control 
https://github.com/Hamlib/Hamlib/issues/1228
 2023-02-01 22:19:02 -06:00
Mike Black W9MDB d645bae207 Ensure K4 is in K40 mode when requesting ID 2023-02-01 16:50:10 -06:00
Mike Black W9MDB 8a25a3be90 Fix sdrsharp model name to show gpredict 2023-01-27 17:46:46 -06:00
Mike Black W9MDB ff64d86fd9 Fix sdrsharp manufacturer name 2023-01-27 17:44:08 -06:00
Mike Black W9MDB 5c36bef6c2 Fix compile warning in sdrsharp.c 2023-01-27 17:39:14 -06:00
Mike Black W9MDB 41a8a50e65 Add SDR# rig for use with SDR#'s gpredict pluigin -- can only get/set freq 2023-01-27 17:31:24 -06:00
Mike Black W9MDB 1e353191bc Make Kenwood rigs wake up serial port on PS command 
Failing get_powerstat will now return RIG_OK
https://github.com/Hamlib/Hamlib/issues/1226
 2023-01-26 08:35:45 -06:00
Mike Black W9MDB eb049ab92d Add dummy bytes to kenwood PS; command 
https://github.com/Hamlib/Hamlib/issues/1226
 2023-01-25 22:18:45 -06:00
Mike Black W9MDB a47eba7ce4 Revert "Update NEWS" 
This reverts commit 76a3ab19eb.
 2023-01-24 11:25:49 -06:00
Mike Black W9MDB 76a3ab19eb Update NEWS 2023-01-24 11:23:47 -06:00
Mike Black W9MDB 3fd698d063 Change QRP QRDX PTT to use TQ instead TX...more incompability with TS-480 standard 2023-01-24 11:22:19 -06:00
Mike Black W9MDB d68c218a3d ERemove EX103 get/set for FTDX5000 2023-01-23 14:49:06 -06:00
Mike Black W9MDB 52bed765ef Clean up rig power on/off sequencing for Kenwood/Elecraft rigs 
Note that the K3/K3S cannot power on via CAT control
https://github.com/Hamlib/Hamlib/issues/1225
 2023-01-22 23:41:21 -06:00
Mike Black W9MDB 9626894029 Fix K3/K3S VFOB mode/bandwidth setting 
https://github.com/Hamlib/Hamlib/issues/1224
 2023-01-22 16:45:22 -06:00
Mike Black W9MDB d16b52e414 Fix IC7300 5 second sleep during poweron 
Reverse ID-5100 logic for dual watch mode
https://github.com/Hamlib/Hamlib/issues/1220
 2023-01-22 10:49:15 -06:00
Mike Black W9MDB 0c2426c800 Add 5 second sleep during power on for IC7300 
https://github.com/Hamlib/Hamlib/issues/1220
 2023-01-21 17:21:04 -06:00
Mike Black W9MDB eb1d467236 Fix segfault in aclog.c 2023-01-20 15:39:23 -06:00
Mike Black W9MDB 50a14bb08f Add ACLog rig -- should work with WSJT_X and Fake It mode -- mode setting is a bit odd though might need None for mode in WSJT-X and manually set rig 2023-01-20 12:47:52 -06:00
Mike Black W9MDB 268f44eb7d Remove one sleep from set_powerstat loop 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-18 23:32:18 -06:00
Mike Black W9MDB 3daed948a8 Make auto_power_on a bit more robust for RigPI which seems slow to get going 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-18 23:27:27 -06:00
Mike Black W9MDB 9d096c4ac9 Improve powerstat on/off behavior for Icom rigs 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-18 15:00:18 -06:00
Mike Black W9MDB ac220815c4 Fix rig_close entry in id5100.c 2023-01-18 12:37:15 -06:00
Mike Black W9MDB 9861d1f87b Add dual watch capability for ID-5100 
https://github.com/Hamlib/Hamlib/issues/1218
 2023-01-18 08:49:11 -06:00
Mike Black W9MDB f392cc4c18 Fix AGC level display in rigctld 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-17 23:54:05 -06:00
Mike Black W9MDB aeb2692b42 Change FTDX10 handshake to None instead of Hardware 2023-01-17 22:30:02 -06:00
Mike Black W9MDB 0ad5a4b742 Attempt to allow PS; query for Yaeus rigs when powered off 
https://github.com/Hamlib/Hamlib/issues/1220
 2023-01-15 22:22:14 -06:00
Mike Black W9MDB c3ff7e134f Add TS-2000 to has_ps exceptions 
https://github.com/Hamlib/Hamlib/issues/1213
 2023-01-15 12:41:01 -06:00
Mike Black W9MDB 77ce6b6dc3 Add FT991 to 60M exception 2023-01-15 10:17:54 -06:00
Mike Black W9MDB dc131cba7f Fix set_powerstat on/off/on for Icom rigs using rigctld power_on=0 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-10 08:46:10 -06:00
Mike Black W9MDB 00dce998ae Fix Elecraft power2mW precision/accuracy 
Should fix any others too
https://github.com/Hamlib/Hamlib/issues/1205
 2023-01-09 23:26:15 -06:00
Mike Black W9MDB aa1cf567f6 Fix Icom poweron behavior 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-09 12:34:22 -06:00
Mike Black W9MDB 58621995f3 Fix FT-710, FTDX10, FTDX101D/MP 60M operations 
https://github.com/Hamlib/Hamlib/issues/1211
 2023-01-09 10:42:57 -06:00
Mike Black W9MDB d2ef9d5eda Fix get_powerstat status return to always show POWER_ON for kenwood non-PS rigs 
https://github.com/Hamlib/Hamlib/issues/1213
 2023-01-09 10:28:43 -06:00
Mike Black W9MDB 89fadca3bd For Icom rigs close and reopen rig after set_powerstat=1 -- Linux resets the usb device 
https://github.com/Hamlib/Hamlib/issues/1212
 2023-01-09 09:50:25 -06:00
Mike Black W9MDB 57522f0b93 Ensure 60M exception for FT710 is only for US language setting 
https://github.com/Hamlib/Hamlib/issues/1211
 2023-01-08 10:28:34 -06:00
Mike Black W9MDB 8be3fcbef5 Add FT-710 to 60M exception in newcat.c to allow some ability to work with WSJT-X 
https://github.com/Hamlib/Hamlib/issues/1211
 2023-01-08 07:58:57 -06:00
Mike Black W9MDB e3ac42a6b6 Update timing in nrd535.c based on testing thanks to markjfine 2023-01-07 22:17:24 -06:00
Mike Black W9MDB 6cb7a8c560 Fix FTDX3000 EX039 error 
https://github.com/Hamlib/Hamlib/issues/1206
 2023-01-07 16:03:34 -06:00
Mike Black W9MDB 7978d74750 Force K22 mode on Elecraft rigs to get PC power level in .1W intervals for low power operations 
https://github.com/Hamlib/Hamlib/issues/1205
 2023-01-07 11:46:56 -06:00
Mike Black W9MDB eb904148b5 Fix elecraft power2mW by scaling power to either 15W or 100W based on KPA availability 
We are ignoring the tx_range values for the Kn series
https://github.com/Hamlib/Hamlib/issues/1205
 2023-01-06 23:31:18 -06:00
Mike Black W9MDB 22df154486 Remove EX039 check from FTDX3000/3000DM 
https://github.com/Hamlib/Hamlib/issues/1206
 2023-01-06 22:22:25 -06:00
Mike Black W9MDB 79255fa27c Remove unnecessary check from netrigctl.c 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-06 16:41:45 -06:00
Mike Black W9MDB 4a487ffdcc Fix rigctld agc level readings -- allow for rig backedn to specify "RIG_AGC_NONE" now for clarity if desired 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-06 16:21:58 -06:00
Mike Black W9MDB 87cc9a8c3d Update ID5100 and ID4100 
Promote ID5100 to stable
https://github.com/Hamlib/Hamlib/issues/1204
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1202
 2023-01-04 15:40:36 -06:00
Mike Black W9MDB 383c95b9c4 Get dummy rig to work with grig by disallowing empty "u" calls 2023-01-04 15:39:23 -06:00
Mike Black W9MDB af9a7a6938 Make 3-byte Icom ID rigs show error message 2023-01-04 10:48:30 -06:00
Mike Black W9MDB cceffce4a5 Remove XONXOFF flow control from ID5100 and ID4100 -- Firmware E8 is not working correclty that flow control 
https://github.com/Hamlib/Hamlib/issues/1202
 2023-01-04 10:45:06 -06:00
Mike Black W9MDB 0404b43bd8 Add PKTUSB to ft1000mp rigs 2023-01-04 07:24:05 -06:00
Mike Black W9MDB 138795668f Fix ID5100 get/set_mode 
Remove ID rigs freq_len check as civ_731 setting should cover it
https://github.com/Hamlib/Hamlib/issues/1204
 2023-01-04 06:57:12 -06:00
Mike Black W9MDB 9c5809ffba Fix units for get freq for ID5100 ID4100 ID31 ID51 
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-03 17:54:04 -06:00
Mike Black W9MDB 1b6b78f54a Another attempt to fix get/set freq for ID5100 ID4100 ID31 ID51 
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-03 12:17:16 -06:00
Mike Black W9MDB 4c09344f32 Convert Icom 3-byte frequency to Hz from KHz 
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-02 23:04:54 -06:00
Mike Black W9MDB c7b33ef0b3 Fix ID5100 ID4100 ID31 ID51 get/set freq 
Remove get_powerstat from ID4100 ID31 ID51 as it they are not capable
Add new rig_is_model function to help with Icom rig identification checks
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-02 11:30:52 -06:00
Mike Black W9MDB fa7289995c Remove get_powerstat from Icom ID-5100 -- does not have the ability to get power status 
https://github.com/Hamlib/Hamlib/issues/1201
 2023-01-02 08:48:59 -06:00
Mike Black W9MDB 582686505c TS-890S query rig to find out which meter type the operator has selected 
Thanks to N3GB George Baltz
 2023-01-01 16:40:19 -06:00
Mike Black W9MDB 712564a2ae Revert "TS-890S query rig to find out which meter type the operator has selected" 
Committed a bit too much
This reverts commit 2fc1d157ba.
 2023-01-01 16:39:25 -06:00
Mike Black W9MDB 2fc1d157ba TS-890S query rig to find out which meter type the operator has selected 
Thanks to N3GB George Baltz
 2023-01-01 16:33:46 -06:00
Mike Black W9MDB 64c566cd14 Add QRPLabs QCX/QDX for better behavior/capability from ts480 entry 2022-12-30 16:04:39 -06:00
Mike Black W9MDB f67a53c41c Allow for 36 and 37 byte IF lengths for ic10.c 
This should fix QRP QRDX buggy IF message -- hopefully the fix theirs to send 33 bytes.
https://github.com/Hamlib/Hamlib/issues/1196#issuecomment-1367473810
 2022-12-29 11:36:50 -06:00
Mike Black W9MDB 04ccccb02d astyle newcat.c 2022-12-28 16:36:59 -06:00
Mike Black W9MDB 7e81e8552a FTDX5000 will now remember startup front/rear setting and restore it 
Will also allow front/rear selection in WSJT-X/JTDX
https://github.com/Hamlib/Hamlib/issues/1195
 2022-12-28 16:34:32 -06:00
Mike Black W9MDB 1fd44dcef2 Make FT5000 EX1031;TX1; command two commands 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 14:27:05 -06:00
Mike Black W9MDB 2306ee4f1d Make sure FT5000 is in data mode for PTT request -- returns to MIC mode on shutdown 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 14:11:25 -06:00
Mike Black W9MDB 606aea1552 FT5000 cannot use RIG_PTT_ON_DATA/MIC menu 103 control and is now set for rear automatically too 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 12:41:39 -06:00
Mike Black W9MDB a75b274f6f Change FTDX5000 write_delay to zero -- was causing microham to return ?; to every command 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-12-26 10:21:35 -06:00
Mike Black W9MDB 97ef9e5bea Add RIG_LEVEL_AGC_TIME to more Icom rigs 
https://github.com/Hamlib/Hamlib/issues/1136
 2022-12-24 14:37:32 -06:00
Mike Black W9MDB 33b2456129 Make FTDX5000 return to MIC input on closing 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-23 16:49:45 -06:00
Mike Black W9MDB b153bcd1e5 Change TX-500 to only have 9600 baud available 
https://github.com/Hamlib/Hamlib/issues/1188
 2022-12-20 08:29:12 -06:00
Mike Black W9MDB 31e911edb8 Remove powerstat from TX-500 -- was always responding PS0; 
https://github.com/Hamlib/Hamlib/issues/1188
 2022-12-19 14:55:14 -06:00
Mike Black W9MDB ea29263f35 Fix unidirectional rig cached frequency (e.g. FT736R) 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-18 09:01:27 -06:00
Mike Black W9MDB f554c3a7ff Fix kenwood_ts890_get_level -- thanks to N3GB George Baltz 2022-12-15 17:11:08 -06:00
Mike Black W9MDB e9192f5a8b Add get_freq cached for FT736R to allow working with gpredict 
https://github.com/Hamlib/Hamlib/issues/1187
 2022-12-14 11:14:54 -06:00
Mike Black W9MDB eb03592d00 If get_powerstat fails in any way then always return RIG_POWER_ON 
https://github.com/Hamlib/Hamlib/issues/1189
 2022-12-14 09:05:27 -06:00
Mike Black W9MDB 5c4c2f7748 If get_powerstat fails assume rig is powered on -- should fix sdr++ problem 
https://github.com/Hamlib/Hamlib/issues/1186
 2022-12-12 17:38:52 -06:00
Mike Black W9MDB d977f3fbdb astyle newcat.c 2022-12-11 13:56:29 -06:00
Mike Black W9MDB 294bdc7d2a Add FTDX1200 to rigs that need to ensure PTT is off before changing frequency 
https://github.com/Hamlib/Hamlib/issues/1185
 2022-12-11 11:53:22 -06:00
Mike Black W9MDB d1dccffd6b Add serialnum parser for MDS rig 2022-12-10 11:58:20 -06:00
Daniele Forsi IU5HKX f359f32bc4 Remove unused include of stdlib.h 2022-12-09 18:10:24 +01:00
Daniele Forsi IU5HKX f17a08fe85 Remove unused include of stdbool.h 2022-12-09 18:03:41 +01:00
Daniele Forsi IU5HKX f4923723fb Remove unused includes of ctype.h 2022-12-09 17:43:48 +01:00
Daniele Forsi IU5HKX a5773f6f4e Remove unused includes of cal.h 2022-12-09 17:39:43 +01:00
Daniele Forsi IU5HKX 3f077a5cf5 Remove unused includes of gpio.h 2022-12-09 17:31:23 +01:00
Daniele Forsi IU5HKX 84fc3169df Remove unused includes of frame.h 2022-12-09 14:51:22 +01:00
Daniele Forsi IU5HKX b93551712f Remove unused includes of fcntl.h 2022-12-09 14:06:59 +01:00
Daniele Forsi IU5HKX 2f6b80d98d Remove unused include of cm108.h 2022-12-09 12:41:24 +01:00
Daniele Forsi IU5HKX 6de45dd331 Remove unused include of amp_dummy.h 2022-12-09 12:37:34 +01:00
Daniele Forsi IU5HKX f7fe2912ec Remove unused includes of errno.h 2022-12-09 12:32:54 +01:00
Mike Black W9MDB b5e258228e Add missing calibration tables for TS890S 2022-12-07 15:30:38 -06:00
Mike Black W9MDB 6a80385f8b Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-12-05 13:59:55 -06:00
PianetaRadio dae50c7a95
Merge branch 'Hamlib:master' into master 2022-12-05 20:40:50 +01:00
Mike Black W9MDB 40d1bad1e1 Fix Jupiter set_freq problem -- was messing up strlen due to binary format 
https://github.com/Hamlib/Hamlib/issues/1174
 2022-12-05 12:49:03 -06:00
Mike Black W9MDB e3487cb5c6 Add RIG_TARGETABLE_MODE to ts890.c 
https://github.com/Hamlib/Hamlib/issues/1172
 2022-12-05 09:13:13 -06:00
Mike Black W9MDB ea1a718bb5 Change CAT TOT command in newcat.c to expect a response 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-04 11:18:33 -06:00
Mike Black W9MDB 156b810319 Add secondary check for rig_model in newcat.c for CAT TOT in case ID command fails 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 22:39:38 -06:00
Mike Black W9MDB a2b3e1348c Fix ID for FT991 and FT991 in newcat.c so CAT TOT settings work 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 22:24:05 -06:00
PianetaRadio 825fc07d00
Merge branch 'Hamlib:master' into master 2022-12-04 00:44:32 +01:00
Mike Black W9MDB 1e1ed4c9e6 Force the FT-991 to 100ms along with FT-DX2000, Ft-891, FT950, FTDX3000/D 
10ms was seeing timeouts on some rigs using rigctl
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 15:18:02 -06:00
PianetaRadio d3d1fd7c40
Update 2022-12-03 19:35:11 +01:00
Mike Black W9MDB 20caf608ac For the FT991 change write_delay=0 and post_write_delay=2 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 10:34:26 -06:00
Mike Black W9MDB 827ae18f2e Reduce FT991 write_delay to 2ms and post_write_delay to 0ms 
This works with CAT TOT = 10ms at 38,400 baud
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-03 07:40:06 -06:00
Mike Black W9MDB a9de174335 Change FT991 write_delay to 5ms -- was seeing many serial errors with 0ms 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-02 08:07:12 -06:00
Mike Black W9MDB aaab26686a astyle newcat.c 2022-12-01 17:18:48 -06:00
Michael Black 57f6c863c6
Merge pull request #1169 from PianetaRadio/master 
Fixing newcat for targetable_vfo options
 2022-12-01 17:17:46 -06:00
PianetaRadio 545811a978
Update newcat.c 2022-12-02 00:04:14 +01:00
Mike Black W9MDB 2b145fe717 Add netrigctl_send_raw to allow send_raw to work with rigctld 
https://github.com/Hamlib/Hamlib/issues/1157
 2022-12-01 16:20:23 -06:00
PianetaRadio 13538c38e0
Update newcat.c 
To be finished
 2022-12-01 21:33:49 +01:00
PianetaRadio cb72a054ea
Update targetable_vfo 2022-12-01 20:39:13 +01:00
PianetaRadio 01706287ff
Update targetable_vfo 2022-12-01 20:37:46 +01:00
PianetaRadio 1102dede64
Update targetable_vfo 2022-12-01 20:37:00 +01:00
PianetaRadio be499866b9
Update targetable_vfo 2022-12-01 20:35:59 +01:00
PianetaRadio 887aeae114
Update targetable_vfo 2022-12-01 20:34:34 +01:00
PianetaRadio ed3d7ed323
NB2 2022-12-01 20:33:22 +01:00
PianetaRadio c9ec1adc9f
Update targetable_vfo 2022-12-01 20:32:35 +01:00
Mike Black W9MDB e46da0c86e Fix newcat check for passband nochange 
https://github.com/Hamlib/Hamlib/issues/1163
 2022-12-01 10:25:51 -06:00
PianetaRadio 3112c2f9e0
NB2 
version update
 2022-12-01 10:33:38 +01:00
PianetaRadio 54bfba3c14
NB2 2022-12-01 10:33:06 +01:00
PianetaRadio 033cc8a192
NB2 
version update
 2022-12-01 10:24:55 +01:00
PianetaRadio 72701a9032
NB2 2022-12-01 10:22:15 +01:00
PianetaRadio 479d7a080a
NB2 
version update
 2022-12-01 10:21:31 +01:00
PianetaRadio bb7d3cbad4
NB2 
version update
 2022-12-01 10:13:54 +01:00
PianetaRadio 20233b92c0
NB2 
version update
 2022-12-01 10:13:11 +01:00
PianetaRadio b90afcb438
NB2 2022-12-01 10:04:01 +01:00
PianetaRadio 9c3405465c
Update newcat version 
NB2 introduction
 2022-12-01 10:02:18 +01:00
Mike Black W9MDB a116cbe502 Astyle newcat.c 2022-11-30 10:45:17 -06:00
PianetaRadio c6b11728c9
Added RIG_FUNC_NB2 
From FT-950 CAT manual, there are two NB options:

NB P1 P2 ;
P1 0: Fixed
P2 0: Noise Blanker “OFF”
1: Noise Blanker “ON”
2: Noise Blanker (Wide) “ON”
 2022-11-30 16:40:50 +01:00
PianetaRadio ea11358379
Added RIG_FUNC_NB2 get/send func 2022-11-30 16:36:53 +01:00
Mike Black W9MDB e2570d9d49 Fix misc TS890S items -- thanks to George Baltz N3GB 2022-11-28 16:45:08 -06:00
Mike Black W9MDB 09fb081847 Fix k3.c math.h 2022-11-28 16:44:58 -06:00
Mike Black W9MDB c5a83b1652 Fix compiler warnings 2022-11-28 11:39:03 -06:00
Mike Black W9MDB b4a6f98524 Fix range list in mds.c 2022-11-28 11:35:58 -06:00
Mike Black W9MDB 3e6ca76c31 Fix frequency check in k3.c 2022-11-28 11:32:30 -06:00
Mike Black W9MDB 39a78a4af7 Fix duplicate targetable_vfo in xiegu.c 2022-11-28 11:31:04 -06:00
Mike Black W9MDB 4d7db63b97 Fix rx_range_list2 problem in dx77.x 2022-11-28 11:29:24 -06:00
Mike Black W9MDB 72e86bf18b Fix logic in dummy.c 2022-11-28 11:27:40 -06:00
Mike Black W9MDB f81c20eb37 Astyle files 2022-11-28 10:48:17 -06:00
Mike Black W9MDB 16826c5a88 Fix compilation warning on fifisdr.c 2022-11-28 08:50:22 -06:00
Mike Black W9MDB 427ca8d90f For FT736 add TARGETABLE_MODE and fix set_mode to work with VFOB 
https://github.com/Hamlib/Hamlib/issues/1160
 2022-11-27 22:22:40 -06:00
Mike Black W9MDB 3ce5718a65 For FT736 fix set_vfo to also work for VFOB and set split when VFOB is requested 
https://github.com/Hamlib/Hamlib/issues/1160
 2022-11-27 22:19:20 -06:00
Mike Black W9MDB 5d7f695727 Add AGC levels to Kenwood rigs that we can verify have them 
https://github.com/Hamlib/Hamlib/milestone/16
 2022-11-24 10:51:34 -06:00
Mike Black W9MDB f8a5b92bc7 Add AGC levels to ts2000.c and fix AGC Level printout to show index number instead of enumeration number. 
Add RIG_AGC_LONG and RIG_AGC_ON levels to match rig's capabilities better
Still need to allow setting AGC level using mnemonics instead of level value to make it more usable
 2022-11-24 09:47:12 -06:00
Mike Black W9MDB ca4814c472 astyle files 2022-11-23 23:31:08 -06:00
Mike Black W9MDB 1ef3549e94 Fix rigctld showing the real rig agc_levels instead of all levels 
Fix display of RIG_AGC_OFF
Add RIG_AGC_LONG
Fix PowerSDR AGC values
https://github.com/Hamlib/Hamlib/issues/1155
 2022-11-23 23:29:18 -06:00
Mike Black W9MDB 508eef31f9 Add set_mode_with_data and get_mode_with_data to Xiegu G90 2022-11-21 11:21:58 -06:00
Mike Black W9MDB e3a1d8c96c Update icom.h data 
https://github.com/Hamlib/Hamlib/issues/1154
 2022-11-20 11:42:45 -06:00
Mike Black W9MDB 7068378a91 Add data mode and targetable freq/mode to Xiegu X6100 
https://github.com/Hamlib/Hamlib/issues/1154
 2022-11-20 11:41:15 -06:00
Mike Black W9MDB 09f83cbfb7 Change MDS 4710/9710 to Alpha status -- no testing has been done yet 2022-11-19 10:47:12 -06:00
Mike Black W9MDB 0bacb35f06 Make kenwood a bit more robust to discern between no reply and corrupted/unexpected reply 
This logic should be usable to use AI mode eventually or share serial splitter line
 2022-11-18 15:53:34 -06:00
Mike Black W9MDB 3c273c001a Fix Xiegu X6100 rig split 
https://github.com/Hamlib/Hamlib/issues/1152
 2022-11-17 14:20:49 -06:00
Mike Black W9MDB 8cffaf3875 Change minimum timeout on all Kenwood rigs to 500ms -- legacy timeouts were a touch too short for all situations 2022-11-17 11:05:49 -06:00
Mike Black W9MDB 1a4745a7c2 Split MDS 4710/9710 2022-11-16 16:50:33 -06:00
Mike Black W9MDB 6c5e0e6974 Update astyle formatting 2022-11-16 15:30:36 -06:00
Mike Black W9MDB a20c21aab0 Fix duplicate MODES in g313-win.c 2022-11-15 17:55:58 -06:00
Mike Black W9MDB 6b41f0738f Clean up rest of dumpcap backend warnings 2022-11-15 17:54:02 -06:00
Mike Black W9MDB 99627855a2 Add mds.h to mds/Makefile.am 2022-11-15 08:09:45 -06:00
Mike Black W9MDB 1e68b06b53 Add MDS 4710 rig 2022-11-14 23:57:22 -06:00
Mike Black W9MDB 1aebee2da9 Fix clang warning on callback functions 
https://github.com/Hamlib/Hamlib/issues/1149
 2022-11-14 16:37:20 -06:00
Mike Black W9MDB 5fa3d59810 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-11-14 16:14:52 -06:00
Mike Black W9MDB 4f5bf9aadd Fix some dumpcaps warnings in many rigs 2022-11-14 16:02:28 -06:00
PianetaRadio a563c749f4
Update newcat.c 
Fix FT991 NR level
 2022-11-14 16:26:53 +01:00
PianetaRadio 20ce600448
Update ft991.c 
Correct NR level
 2022-11-14 16:14:28 +01:00
PianetaRadio ae0f7f4237
Merge branch 'Hamlib:master' into master 2022-11-14 16:09:21 +01:00
Mike Black W9MDB d8caad3d1b Update level_gran_yaesu.h 2022-11-14 08:19:07 -06:00
PianetaRadio 7bcf599afc
Update ft991.c 
NR level range
 2022-11-14 10:43:07 +01:00
PianetaRadio 4bede074fc
Update newcat.c 
Fix NR level for FT-991, according to manual range is 1...15
 2022-11-14 10:42:07 +01:00
PianetaRadio 8533002f8e
Update ft991.c 
LVL_NR
 2022-11-14 10:33:40 +01:00
Mike Black W9MDB 5a5fc68922 Add missing level_gran_kenwood.h 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-13 08:05:52 -06:00
Mike Black W9MDB 8616be635e Fix level_gran on kenwood rigs 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-13 06:53:55 -06:00
Mike Black W9MDB cc3d912a76 Fix readonly set_level in flex6xxx.c 2022-11-11 23:26:20 -06:00
Mike Black W9MDB c168a99c83 Fix all Icom level_gran values 2022-11-11 23:14:14 -06:00
Mike Black W9MDB 60a6170545 Update Makefile.am for Yaesu to include level_gran_yaesu.h 2022-11-11 17:09:26 -06:00
Mike Black W9MDB c844b02ed1 Fix dumpcap level_gran for Yaesu rigs 2022-11-11 16:56:42 -06:00
Mike Black W9MDB d7ab039573 Fix backwards compatibility of rotctl with rotctld 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 22:28:28 -06:00
Mike Black W9MDB 42f65cc5fb Move rotctl south_zero to new dump protocol section for backwards compatibility 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 21:58:32 -06:00
Mike Black W9MDB 782e54e4f2 Fix new protocol in rotctl functions to duplicate logic in rigctl new protocol 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 21:54:00 -06:00
Mike Black W9MDB 853806b978 Fix rotctld dumpcaps to expose client rot_type instead of Other 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 17:53:21 -06:00
Mike Black W9MDB eeac97c725 Fix FT-991 level_gran 
https://github.com/Hamlib/Hamlib/issues/1144
 2022-11-10 16:00:00 -06:00
Mike Black W9MDB 539457f6ce Update ftdx10.h power levels 2022-11-10 12:18:18 -06:00
Mike Black W9MDB 27f424dfe2 Add RIG_FUNC_TUNER to flrig.c 2022-11-10 12:17:17 -06:00
Mike Black W9MDB 36717917ce Fix 5W level of ftdx10.c based on user testing 2022-11-09 15:27:20 -06:00
Mike Black W9MDB 2993ca9e62 Fix segfault in icom_get_powerstat 2022-11-08 15:09:09 -06:00
Mike Black W9MDB fde9ad706c Fix IC-7300 rig power on hopefully 
https://github.com/Hamlib/Hamlib/issues/1142
 2022-11-08 10:47:57 -06:00
Mike Black W9MDB 0963d8c5bf Fix if_len in flex6xxx.c 
https://github.com/Hamlib/Hamlib/issues/1141
 2022-11-07 12:24:55 -06:00
Mike Black W9MDB 454f640237 Fix dummy_set_split_freq 2022-11-06 15:58:30 -06:00
Mike Black W9MDB 1074410bd5 Add RIG_LEVEL_KEYSPD to ts890s.c 
https://github.com/Hamlib/Hamlib/issues/1139
 2022-11-05 12:58:40 -05:00
Mike Black W9MDB c218996e2f Add RIG_FUNC_OVF_STATUS for IC-7300, IC-9700, IC-705, IC-R8600 2022-11-04 23:31:51 -05:00
Mike Black W9MDB 8789321465 Add ID 800 for FT710 2022-11-04 22:41:02 -05:00
Mike Black W9MDB bf22bc4b02 Fix flrig get_ptt 
https://github.com/Hamlib/Hamlib/issues/1138
 2022-11-04 13:26:52 -05:00
Mike Black W9MDB d311153f63 Add AGC_TIME to IC-7300, IC-9700, and IC-705 
https://github.com/Hamlib/Hamlib/issues/1136
 2022-11-04 10:49:14 -05:00
PianetaRadio aedf39adc2
Update netrotctl.c 
Add south_zero from dump_state in open function
 2022-11-04 11:32:39 +01:00
Mike Black W9MDB eff048d729 Add AGC_OFF to IC7300 agc levels 2022-11-01 14:57:37 -05:00
Mike Black W9MDB b2cf596b54 IC7300 cannot get powerstat so use get_freq instead. There are likely more Icom rigs like this 2022-11-01 14:51:47 -05:00
Mike Black W9MDB 0d73bb22a0 Fix LEVEL_USB_AF 
https://github.com/Hamlib/Hamlib/issues/1135
 2022-11-01 12:25:42 -05:00
Mike Black W9MDB 2a30396d70 Add RIG_LEVEL_USB_AF for IC-705, IC-7300, IC-9700, IC-785x, and IC-R8600 
In combination with RIG_LEVEL_RF we should be able to create an AGC control
for WSJTX and JTDX for example to keep audio levels within a good A/D range automagically
https://github.com/Hamlib/Hamlib/issues/1135
 2022-11-01 09:14:19 -05:00
Mike Black W9MDB b2bd93a7be Small update to newcat.c notes 2022-11-01 08:06:48 -05:00
Mike Black W9MDB 1cb999af01 Fix space in string compare in flrig.c 
https://github.com/Hamlib/Hamlib/issues/1134
 2022-10-30 22:25:28 -05:00
Mike Black W9MDB 9c02b2ebc2 Fix Yaesu DT command and add 2 or 4 digit timezone option 
https://github.com/Hamlib/Hamlib/issues/1132
 2022-10-25 23:26:16 -05:00
Mike Black W9MDB e3ce4a35a4 Add RIG_SCAN_STOP to newcat_scan 2022-10-21 22:54:20 -05:00
Mike Black W9MDB d3d21983f0 Fix newcat_scan 2022-10-21 22:41:29 -05:00
Mike Black W9MDB bbeb87eb05 Add newcat_scan for Yaesu rigs 2022-10-21 22:27:58 -05:00
Mike Black W9MDB b674317791 Fix kenwood PS command length 2022-10-21 13:26:13 -05:00
Mike Black W9MDB e9325c9c7b Fix case on TS-990S 2022-10-16 08:15:33 -05:00
Mike Black W9MDB 411925a372 FT710 does have targetable mode 2022-10-14 15:44:24 -05:00
Mike Black W9MDB b46b930770 Update FT710 parameters based on testing 
FT8 mode defaults to 1 stop bit and no hardware flow control
 2022-10-14 15:33:26 -05:00
Mike Black W9MDB e6cd452c9d Fix detection if FT-710 
Update simyaesu.c
 2022-10-14 09:02:40 -05:00
Mike Black W9MDB 04bc5cc089 Add FT710 to newcat.c checks 2022-10-13 17:41:27 -05:00
Mike Black W9MDB 791a5e3f57 Update max baud rate for ft710.c 2022-10-12 23:12:48 -05:00
Mike Black W9MDB 436365f6a4 Add ft710.c 2022-10-12 22:57:51 -05:00
Mike Black W9MDB ec4aea81b2 Add FT-710 as a clone of FTDX10 2022-10-12 22:51:21 -05:00
Mike Black W9MDB dde5d752fc Update kenwood.h date 2022-10-12 22:39:04 -05:00
Mike Black W9MDB b3d0a5a350 Add if_len to flex6xxx.c 2022-10-12 22:38:21 -05:00
Mike Black W9MDB 8adfd5e351 Update some debug and fix length of PS command in kenwood.c 2022-10-10 22:15:06 -05:00
Mike Black W9MDB 6bd5ab89b6 Remove incorrect debug line in icom.c 2022-09-22 15:39:42 -05:00
Mike Black W9MDB 67b933ddb5 Update astyle for 4.5 release 2022-09-20 08:46:28 -05:00
Mike Black W9MDB 9b98ea11eb Make debug rx_vfo info match code better in kenwood.c 
https://github.com/Hamlib/Hamlib/issues/1116
 2022-09-17 10:24:13 -05:00
Mike Black W9MDB 7db23d549f Add another priv->has_ps check to kenwood.c 2022-09-13 22:15:22 -05:00
Mike Black W9MDB 8c4c906efe Add a few more rigs to have_ps=0 2022-09-13 16:22:03 -05:00
Mike Black W9MDB e7262e23c8 Make TS450S turn off has_ps 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 11:45:58 -05:00
Mike Black W9MDB f58ca95c9c TS-450S/690S does not have PS cmd so we will disable have_ps when 1st call to PS times out for Kenwood rigs 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 09:26:04 -05:00
Mike Black W9MDB 098d1d8dbb Fix uninitialized value in flrig.c found by valgrind 2022-09-10 13:00:34 -05:00
Mike Black W9MDB 224ccc7839 Fix filter set for IC375 and promote to stable 
https://github.com/Hamlib/Hamlib/issues/1113
 2022-09-09 14:01:43 -05:00
Mike Black W9MDB 9cb511af00 Add some debug for Icom use_cached variables 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-09-05 12:21:45 -05:00
Mike Black W9MDB 4007581363 Add async capability to IC-706 series while we're debugging issue 1108 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-09-05 09:54:17 -05:00
Mike Black W9MDB 5701e73e1e Fix valgrind warning 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-08-31 08:57:00 -05:00
Mike Black W9MDB 7e51932a9e Remove some debug from icom.c 2022-08-29 10:11:40 -05:00
Mike Black W9MDB 1aed27c71a Remove #defines for rig_set_split and return to standard call 2022-08-27 07:36:14 -05:00
Michael Black efd166fb50
Merge pull request #1106 from mikaelnousiainen/fix-yaesu-power-off-handling 
Fix handling of EPOWER error code and reduce unnecessary commands in Yaesu newcat backend
 2022-08-23 12:11:51 -05:00
Mikael Nousiainen dc02c566f5 Fix handling of the new EPOWER error code: do not re-open rig and fix/extend allowed commands when rig is powered off. Fix Yaesu newcat backend to not try to call rig ID command during command validation. 2022-08-23 00:10:25 +03:00
Mike Black W9MDB ef06b358d7 Add verification of EX commands in newcat.c 2022-08-22 15:55:35 -05:00
Mike Black W9MDB 2275bf51f8 When Yaeus rigs are split and tx is on VFOA then turning split off will remain on VFOB tx/rx 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 12:20:01 -05:00
Mike Black W9MDB 95126fd350 Add EX echo as separte get_cmd call for CAT TOT TIMEOUT 
Could do this for other EX commands too
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 12:00:38 -05:00
Mike Black W9MDB f8f0678988 Take out EX echo request -- can't do that as EX command does not expect response 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:57:53 -05:00
Mike Black W9MDB 4664620b92 Add FTDX300DM to same exceptions as FTDX3000 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:51:34 -05:00
Mike Black W9MDB 3f99ec47db Have FTDX5000 and DX3000 echo CAT TOT TIMEOUT when set 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:47:13 -05:00
Mike Black W9MDB e86e05bce3 Change FTDX3000 CAT TOT TIMEOUT to 100ms 
Change Yaesu split detection to detect reverse split
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:40:52 -05:00
Mike Black W9MDB e8fa723bc8 Change FTDX3000 write_delay back to zero -- at value of 1 rigctl was showing all ? responses from rig at 38400 baud 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 10:29:22 -05:00
Mike Black W9MDB c34f719337 Astyle files 2022-08-20 22:56:04 -05:00
Mike Black W9MDB b4150fce19 FT747GX add TARGETABLE_FREQ and update rx_range_list and tx_range_list for new range_list implmentation 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 15:39:21 -05:00
Mike Black W9MDB d0dcfbff84 FT747GX remove debug code -- duh... 2022-08-19 11:57:08 -05:00
Mike Black W9MDB abc2d5a846 FT747GX show cached freqs when get_freq is called 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 09:33:10 -05:00
Mike Black W9MDB b97b8b0fe7 For FT747GX do not get info when PTT is on -- use cached info 2022-08-19 09:30:59 -05:00
Mike Black W9MDB 28b1a9bb95 Increase FT747GX cache timeout to 1500ms as get_freq is taking over 1000ms 2022-08-19 08:33:31 -05:00
Mike Black W9MDB 179ee66f0d Add 600ms wait when newcat.c see rig busy 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-19 08:21:29 -05:00
Mike Black W9MDB 6965927fb4 Add IC275 to icom rigs that can't do 0x25 2022-08-19 07:55:20 -05:00
Mike Black W9MDB ed5a26ac4e Try to get FT747GX to return freq while transmitting 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 06:58:03 -05:00
Mike Black W9MDB deb5ea6d6f For FT747GX return cached freq when in TX 2022-08-18 17:33:41 -05:00
Mike Black W9MDB 4442f67e7a Finally got the FT747GX set_freq working correctly 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-18 17:03:17 -05:00
Mike Black W9MDB 88f5022079 Still trying to fix FT747GX set_freq 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-18 15:59:56 -05:00
Mike Black W9MDB 23fcad6d86 Hopefully fix FT747GX get_freq 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-18 09:21:17 -05:00
Mike Black W9MDB 34e651cf62 Attempt to fix ft747gx set_freq 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-17 17:40:09 -05:00
Mike Black W9MDB 36e88e705b Increase write_delay in FT5000 to 1ms -- suspect it has similar problem to FT3000 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-08-17 13:08:23 -05:00
Mike Black W9MDB fa162231e7 Increase FTDX3000 write delay to 1ms -- when using Fake It in WSJTX was not recognizing VS0; command 2022-08-17 12:45:19 -05:00
Mike Black W9MDB 824a6d11fc Turn off 60M split for Yaesu rigs (e.g. FTDX-10) that have to use memory mode for 60M band 2022-08-16 09:29:07 -05:00
Mike Black W9MDB 810da5f54c Fix EK89X set_freq and upgrade to BETA status 
Add ISBUSB and ISBLSB modes
 2022-08-13 08:52:42 -05:00
Mike Black W9MDB eea51fe7c7 Change EK89X to odd parity 2022-08-08 16:05:14 -05:00
Mike Black W9MDB 3c4a9f1627 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-08-04 08:24:19 -05:00
Mike Black W9MDB 32f9353c03 Increase write_delay for Xiegu 6100 to 3ms -- was locking up rig < 3ms 2022-08-04 08:23:26 -05:00
Michael Black 1830d768d6
Merge pull request #1097 from ncw/fix-qcx-mini 
Fix sending morse with QRPLabs QCX rigs
 2022-08-03 15:43:34 -05:00
Mike Black W9MDB f32af7496d Remove powerstat commands from Xiegu rigs 2022-08-03 12:36:35 -05:00
Nick Craig-Wood M5NCW a81c295b3c Fix sending morse with QRPLabs QCX rigs 
The QCX series emulates the Kenwood TS480. However for the sending
morse command it seems to be more in line with the Elecraft K series
rigs.

Before this change, the QCX mini would reply to the KY command with
KY2 which was not understood. The QCX mini defines the KY responses to
be:

- KY0; if message sending is in progress and the transmit text buffer is not more than 75% full
- KY1; if message sending is in progress and the transmit text buffer is more than 75% full
- KY2; if no message is being sent, therefore the transmit text buffer is emtpy

This seems to be an extension of the original Kenwood protocol but it
is exactly as implemented by Elecraft in their K series rigs.

This patch treats the KY2 response the same as the KY0 response
meaning - OK to transmit.
 2022-08-03 18:31:03 +01:00
Mike Black W9MDB 8c172af224 Remove split function from Xiegu G90 -- does not support them 2022-08-03 12:06:19 -05:00
Mike Black W9MDB e8c36b2b4b Add some more rigs to icom.c that do not use 0x25/0x26 commands 2022-08-01 17:25:10 -05:00
Mike Black W9MDB 0e85260d0f One more X5105 change 2022-08-01 15:32:11 -05:00
Mike Black W9MDB 5ee3c15c3b Remove set/get_powerstat from Xeigu X5105 2022-08-01 15:26:28 -05:00
Mike Black W9MDB 3762823255 Trying to make x5105 x108g_set-ptt happy 2022-08-01 15:17:15 -05:00
Mike Black W9MDB 65a2101aff Another attempt to fix x108g_set_ptt 2022-08-01 15:02:22 -05:00
Mike Black W9MDB 998715f3f4 Allow 0xfb for x108g_set_ptt 2022-08-01 14:40:00 -05:00
Mike Black W9MDB 0b059cdb93 Fix icom.c debug statement 2022-08-01 13:24:10 -05:00
Mike Black W9MDB e76bbf0e51 Remove split functions from Xiegu X5105 -- it does not do split apparently 2022-08-01 13:22:48 -05:00
Mike Black W9MDB 6bd647f4ed Fix X5105 detection 2022-08-01 13:06:21 -05:00
Mike Black W9MDB 51650e9425 Remove get_dsp_flt for Xeigu X5105 2022-08-01 12:53:34 -05:00
Mike Black W9MDB 1191ddc602 Remove FA/FB validation for FTDX5000 -- was failing but succeeding on 2nd try 2022-07-30 11:55:36 -05:00
Mike Black W9MDB 2b7c2ab5ce Fix all Icom rigs AGC values for correct printout with dumpcaps 
https://github.com/Hamlib/Hamlib/issues/1096
 2022-07-29 23:44:17 -05:00
Mike Black W9MDB 2703aa7dab Fix IC746 AGC values 2022-07-29 23:02:28 -05:00
Mike Black W9MDB 3880128370 Fix FTDX5000 EX0331 command 2022-07-29 17:18:51 -05:00
Mike Black W9MDB 64e226045a Add powerstat calls to xeigu rigs 2022-07-29 10:23:49 -05:00
Mike Black W9MDB 36c777e8bb Add Rohde&Schwartz EK895/896 2022-07-28 23:26:35 -05:00
Mike Black W9MDB be3865693a astyle tmd710.c 2022-07-28 10:34:01 -05:00
Mike Black W9MDB 15f54ccab5 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-07-28 10:33:28 -05:00
Mike Black W9MDB 4385b50b1f Add Xiegu X5105 from G90 config 2022-07-28 10:33:07 -05:00
Mikael Nousiainen 1f05801d0f Fix current and split VFO frequency handling for Kenwood TM-D710(G). Use CTRL VFO in the rig for denoting current VFO and PTT VFO for split VFO. 2022-07-28 17:18:04 +03:00
Mike Black W9MDB 57aa5e8399 Revert "Fix FT897 freq set/get for > 100MHz" 
This reverts commit 44ad5c6363.
 2022-07-28 07:10:13 -05:00
Mike Black W9MDB a83eb3bf42 astyle files for 4.5 release 2022-07-27 17:16:17 -05:00
Mike Black W9MDB 44ad5c6363 Fix FT897 freq set/get for > 100MHz 
https://github.com/Hamlib/Hamlib/issues/1065
 2022-07-27 12:45:13 -05:00
Mike Black W9MDB 627ec83652 Change malloc to calloc 2022-07-27 10:26:08 -05:00
Mike Black W9MDB dd3208ad34 Change malloc to calloc 2022-07-27 10:08:29 -05:00
Mike Black W9MDB 027b3ee0a5 Fix valgrind warning uninitialized value in dummy.c for priv->split 2022-07-27 10:03:20 -05:00
Mike Black W9MDB 0c89bcd89f Fix possible uninitialized access in dummy.c 2022-07-27 07:24:19 -05:00
Mike Black W9MDB 21e6e9bf2a Fix X command turning of split mode 
https://github.com/Hamlib/Hamlib/issues/1083
 2022-07-26 10:00:36 -05:00
Mike Black W9MDB d8b33f3b0e Add vfo to ft100_set_vfo debug 2022-07-26 09:51:11 -05:00
Michael Black 74b4d7beb6
Merge pull request #1091 from dforsi/fix/unused-includes 
Fix/unused includes
 2022-07-24 11:44:01 -05:00
Daniele Forsi IU5HKX 7a132e2703 Remove unused includes 
Removes includes of stdio.h stdlib.h string.h unistd.h
 2022-07-24 17:08:57 +02:00
Daniele Forsi IU5HKX 34018600ee Remove unused includes of math.h 2022-07-23 18:39:55 +02:00
Daniele Forsi IU5HKX 4dfe46edbb Remove unused includes related to times and dates 
Removes includes of time.h sys/time.h hamlibdatetime.h
 2022-07-23 18:12:10 +02:00
Mike Black W9MDB 05941406da This broke Icom rigs. 
Revert "Improve debug output on icom_get_vfo to note Icom's inability to get current vfo"

This reverts commit 02b2dad5b0.
 2022-07-22 15:51:22 -05:00
Mike Black W9MDB 02b2dad5b0 Improve debug output on icom_get_vfo to note Icom's inability to get current vfo 2022-07-22 12:57:11 -05:00
Mike Black W9MDB 1c0655a9f5 Reduce a couple of debug statements from ERROR to VERBOSE 2022-07-22 12:43:22 -05:00
Mike Black W9MDB 4677fb16d4 Change FTDX5000 to RIG_PTT_RIG_MICDATA and add logic to newcat. 2022-07-19 23:25:56 -05:00
Mike Black W9MDB 4627e7c4fb Update kenwood rig->state.tx_vfo in kenwood_get_split_vfo_if 
https://github.com/Hamlib/Hamlib/issues/1083
 2022-07-19 13:25:28 -05:00
Mike Black W9MDB 67248edfb8 Allow Omni VII to timeout faster 
https://github.com/Hamlib/Hamlib/issues/1087
 2022-07-18 09:51:00 -05:00
Mike Black W9MDB 946408e0de Promote FDM-DUO to STABLE 2022-07-17 11:25:29 -05:00
Mike Black W9MDB ccea73e631 Add set_powerstat and get_powerstat to PowerSDR 2022-07-15 16:25:36 -05:00
Mike Black W9MDB d0c615ae43 Added EPOWER error return when rig is powered off 
Only set_powerstat will be accepted and rig will be polled for powerstat
https://github.com/Hamlib/Hamlib/issues/1085
 2022-07-15 15:41:23 -05:00
Mike Black W9MDB 30884ae47e Add amp_set_level and amp_set_ext_level 2022-07-14 08:14:41 -05:00
Mike Black W9MDB 71f5766d57 Really fix the k3.c compilation warning 2022-07-14 06:54:56 -05:00
Mike Black W9MDB 1566ceae35 Fix 2nd vfonum warning in tmd710.c 2022-07-13 09:32:04 -05:00
Mike Black W9MDB d0a09d49cc Fix vfonum in tmd710.c 2022-07-13 09:31:01 -05:00
Mike Black W9MDB 94338d46dd Fix compilation warning in k3.c 2022-07-13 09:24:01 -05:00
Mike Black W9MDB 2835c431df Change ft857_set_freq to use ft857_get_ptt instead of rig_get_ptt 
Should be able to get transmit status using ptt=None and Signalink VOX PTT
https://github.com/Hamlib/Hamlib/issues/1084
 2022-07-12 17:52:49 -05:00
Mike Black W9MDB e5ba9c401a Force FTDX5000 to 100ms CAT TIME OUT TIMER 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-07-09 07:40:59 -05:00
Mike Black W9MDB b1369f9458 Fix ic9700 segfault 
https://github.com/Hamlib/Hamlib/issues/1078
 2022-07-07 22:10:49 -05:00
Daniele Forsi IU5HKX 08c06aea14 Fix spelling errors 
Fixed with:
codespell --summary --skip=.git,extra,,lib,macros,security --ignore-words-list="ans,ba,cant,develope,fo,get's,nin,numer,parm,parms,setts,som,statics,ths,ue,vektor,objext" --write-changes --interactive=2
and manual editing.
 2022-07-07 23:56:22 +02:00
Mike Black W9MDB 994d7a2ca6 Fix RTS PTT working with rigctld 
https://github.com/Hamlib/Hamlib/issues/1074
Was fixed by this patch
fc6e432143
 2022-07-06 08:33:14 -05:00
Mike Black W9MDB fc6e432143 Fix kenwood split status 
https://github.com/Hamlib/Hamlib/issues/1072
 2022-07-05 17:03:21 -05:00
Mike Black W9MDB 5e6c1eaef8 Rename TRACE to HAMLIB_TRACE to avoid conflict with MSVC 2022-07-04 07:26:30 -05:00
Mike Black W9MDB 7708e979d9 Add some debug for 60m exception 2022-07-03 08:07:23 -05:00
Mike Black W9MDB fc0e80a0d1 Add 60M exception for FTDX10 to not try and set frequency or mode 2022-07-03 07:58:47 -05:00
Mike Black W9MDB 7dee3aaf5d Fix dangling pointer in aor.c 2022-06-30 17:33:21 -05:00
Mike Black W9MDB 944a52e664 Git rid of compile warning in ft990v12.c 2022-06-30 10:53:30 -05:00
Mike Black W9MDB 04b9353d88 Change fix for IC9700 satmode to be more generic 
https://github.com/Hamlib/Hamlib/issues/1059
 2022-06-30 08:15:49 -05:00
Mike Black W9MDB aa616b3707 For Icom rigs return bandwidth of 12000 for FM mode 
https://github.com/Hamlib/Hamlib/issues/1066
 2022-06-29 15:43:49 -05:00
Mike Black W9MDB cd2b734150 Prevent IC9700 from using 0x25 0x26 commands when in satmode 
https://github.com/Hamlib/Hamlib/issues/1059
 2022-06-29 15:40:41 -05:00
Mike Black W9MDB f4d0e3e402 Add IC375 2022-06-29 15:35:27 -05:00
Mike Black W9MDB 0bcf9a8f98 Update ft990v12 fixing include and naming 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-28 13:30:52 -05:00
Mike Black W9MDB 5711257279 Restore ft990.c and move FT990UNI to it's own file 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-28 09:21:04 -05:00
David Brewerton M0EZP 2f4bca95f7 FT990UNI patch contribution from M0EZP 2022-06-28 07:03:43 -05:00
Mike Black W9MDB 04250b3203 Add TARGETABLE_MODE to tmd710.c 2022-06-26 17:53:19 -05:00
Mike Black W9MDB 05c5724bcf Change TMD710 to TARGETABLE_FREQ 2022-06-24 07:24:36 -05:00
Mikael Nousiainen d3659ef996 Use the correct max RX lengths for min/max reads for Kenwood to avoid timeouts 2022-06-21 21:10:24 +03:00
Mike Black W9MDB e716a010e8 Fix compile warning on tmd710.c 2022-06-20 23:24:28 -05:00
Mike Black W9MDB e7f51edfcb Fix OmniVII set_mode 2022-06-20 18:03:55 -05:00
Mike Black W9MDB 214835339c Fix some more mingw warnings in tmd710.c 2022-06-20 08:09:03 -05:00
Mike Black W9MDB be58dae674 Fix common_dcs_list compile warning on mings for tmd710.c 2022-06-20 08:03:41 -05:00
Mike Black W9MDB 6513b485c9 Add tm71_caps back in 
https://github.com/Hamlib/Hamlib/pull/1071
 2022-06-20 07:58:56 -05:00
Lance Conry 28d304e8fe From a pull request but modified to fit current codebase and clean up warnings 
https://github.com/Hamlib/Hamlib/pull/1071
 2022-06-20 07:47:21 -05:00
Mike Black W9MDB 5c9df8e27d Add FT991UNI to yaesu model list 2022-06-19 16:39:52 -05:00
Mike Black W9MDB 5e9bfed4ce Malachite fix to return good freq for VFOA and zero just for VFOB -- duh 
https://github.com/Hamlib/Hamlib/issues/1070
 2022-06-19 12:27:56 -05:00
Mike Black W9MDB fdbdb388e2 Fix Malachite SDR to return 0 freq when VFOB is requested -- rig does not have VFOB 
https://github.com/Hamlib/Hamlib/issues/1070
 2022-06-19 12:03:32 -05:00
Mike Black W9MDB 521d3f6ac3 OmniVII fix several places where command lengths were incorrect 2022-06-18 12:57:34 -05:00
Mike Black W9MDB 4d3e8ac240 Migrate tentec README 2022-06-17 15:41:29 -05:00
Mike Black W9MDB 8c1bb1d439 Allow OmniVII set_ptt to also set RIPing for ethernet 
https://github.com/Hamlib/Hamlib/issues/1067
 2022-06-17 07:02:11 -05:00
Mike Black W9MDB f3b95e744a Fix OmniVII ptt -- could turn on but not turn it off 
https://github.com/Hamlib/Hamlib/issues/1067
 2022-06-16 22:52:32 -05:00
Mike Black W9MDB 459e4ce735 TS-890S add RIG_FUNC_SEND_MORSE 
https://github.com/Hamlib/Hamlib/issues/1043
 2022-06-16 07:52:45 -05:00
Mike Black W9MDB 17aa82dc12 Fix divide by 10 for TT599 NR 
https://github.com/Hamlib/Hamlib/issues/1061#issuecomment-1155267428
 2022-06-14 09:38:16 -05:00
Mike Black W9MDB e66cf67a96 Fix TT599 and TT565 NR level to set levels 1-9 and read levels 1-10 
Unable to set level 10 apparently for 599 and probably same for 565
https://github.com/Hamlib/Hamlib/issues/1061
 2022-06-14 09:13:07 -05:00
Mike Black W9MDB e859d6a2c9 Add debug to ft990.c 2022-06-13 12:01:15 -05:00
Mike Black W9MDB a9e7bd4433 Another attempt to get FT990UNI working well 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-13 09:51:03 -05:00
Mike Black W9MDB c964ec6bfb For FT990UNI permanently cache the update_data block 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-12 16:49:53 -05:00
Mike Black W9MDB 82fac3e0a6 Missed committing ft990.c 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-12 09:30:12 -05:00
Mike Black W9MDB 5b5b83b3f3 Try to get best behavior on FT900UNI during startup -- read 1492 bytes just once 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-12 09:10:42 -05:00
Mike Black W9MDB 5f26083fac Add ENTER/RETURNFUNC to netrigctl_open to identify lines when EPROTO errors occur 2022-06-12 07:46:35 -05:00
Mike Black W9MDB bba6a0b88b FT990UNI make it read the entire 1492 response when asking for UPDATE_VFO_DATA 
https://github.com/Hamlib/Hamlib/milestone/14
 2022-06-09 07:14:21 -05:00
Mike Black W9MDB 92ba0b92ac Fix TT599 RIG_LEVEL_NR 
https://github.com/Hamlib/Hamlib/issues/1061
 2022-06-08 17:10:26 -05:00
Mike Black W9MDB eb453db056 Hopefully fixed ELAD FDM Duo split setting 
https://github.com/Hamlib/Hamlib/issues/1062
 2022-06-08 16:52:49 -05:00
OM4AEI Peter Micuda 25a2a00c12 Fix TT599 SWR level reading 
Thanks to Peter Micuda OM4AEI
https://github.com/Hamlib/Hamlib/issues/1060
 2022-06-08 16:31:02 -05:00
Mike Black W9MDB 2a3fb3bb08 For FT990 add caching of VFO_OP data 
And add rig_flush before sending commands
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-08 09:12:23 -05:00
Mike Black W9MDB dc89d085d0 Fix Elad FDM-Duo split command -- was using TB but needs to be SP 2022-06-08 08:40:14 -05:00
Mike Black W9MDB e0d39b3dcb Change IC7800 mode definitions to allow for PKTUSB and PKTLSB 
https://github.com/Hamlib/Hamlib/issues/1057
 2022-06-07 17:40:38 -05:00
Mike Black W9MDB cca8d2b4ed For the FT-990 we can read VFOA frequency once. 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-07 12:19:09 -05:00
Mike Black W9MDB 479c43afa1 Update cache for yaesu rigs when bypassing rig_* functions 
Update cache for FT991
Add polling for freq and mode in rig_open to prime those values
https://github.com/Hamlib/Hamlib/issues/1056
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-07 11:50:25 -05:00
Mike Black W9MDB ce99f4c75d Allow rig_set_split_mode to skip setting if mode already set 
https://github.com/Hamlib/Hamlib/issues/1056
 2022-06-07 08:33:18 -05:00
Mike Black W9MDB ad2f5047e0 Fix rig_set_lock_mode and rig_get_lock_mode 
https://github.com/Hamlib/Hamlib/issues/1044
 2022-06-06 22:54:10 -05:00
Mike Black W9MDB c17bcaa343 Fix TT599 set bandwidth to return control to bandwidth knob 
https://github.com/Hamlib/Hamlib/issues/1055
 2022-06-06 15:51:08 -05:00
Mike Black W9MDB 4360188643 Chanage ID-5100 to XONXOFF flow control 
https://github.com/Hamlib/Hamlib/issues/1053
 2022-06-03 22:13:00 -05:00
Mike Black W9MDB d12ca22916 Add PTT check in set_freq since rig cannot set freq while transmitting 
VOX mode was a problem so this ptt check should fix it.
https://github.com/Hamlib/Hamlib/issues/1052
 2022-06-03 08:11:32 -05:00
Mike Black W9MDB 8652741301 Add FT990UNI model for older FT990 ROM rigs that have to read all 1492 bytes 
For this model get_freq will return the cached value
So Hamlib will not follow manual frequency changes on the rig
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-03 07:40:11 -05:00
Mike Black W9MDB a468f0dee8 Allow Kenwood AI command for FA/FB async operation 
https://github.com/Hamlib/Hamlib/issues/1049
 2022-06-02 23:21:51 -05:00
Mike Black W9MDB f555eceff9 Got set_lock_mode and get_lock_mode working now 
https://github.com/Hamlib/Hamlib/issues/1044
 2022-06-02 15:55:56 -05:00
Mike Black W9MDB ce1d863a69 Fix split detection in ft991 
https://github.com/Hamlib/Hamlib/issues/1046
 2022-06-01 17:20:14 -05:00
Mike Black W9MDB 763836881f Reverse selected vfo logic for 0x25 command when in split and ptt is on for Icom rigs 
https://github.com/Hamlib/Hamlib/issues/1048
 2022-06-01 12:29:12 -05:00
Mike Black W9MDB 0acb549153 Remove FT-991 from bandstack detection on band change -- does not behave well 
https://github.com/Hamlib/Hamlib/issues/1046
 2022-06-01 12:12:46 -05:00
Mike Black W9MDB 66b69f60a9 Remove redundant BS command in newcat.c 
https://github.com/Hamlib/Hamlib/issues/1046
 2022-06-01 10:36:33 -05:00
PianetaRadio a9eeb70f21
Dummy rotator max_az = 450 2022-05-31 12:38:30 +02:00
Mike Black W9MDB 901cea8944 Add wait_morse to rigs that had send_morse but missing wait_morse 
wait_morse only works on full break-in
https://github.com/Hamlib/Hamlib/issues/1043
 2022-05-29 22:53:30 -05:00
Mike Black W9MDB f19d354ede Astyle files 2022-05-29 12:06:44 -05:00
Mike Black W9MDB 83508b5e38 Add send_morse to TS-890S 
https://github.com/Hamlib/Hamlib/issues/1043
 2022-05-28 15:21:51 -05:00
Mike Black W9MDB 8cc4d59cbb Change rig->caps-retry to rig->state.rigport.retry 
https://github.com/Hamlib/Hamlib/issues/1037
 2022-05-25 10:48:16 -05:00
Mike Black W9MDB 0b73daa4d8 Fix FT650 detection in ft847.c 2022-05-25 07:59:43 -05:00
Mike Black W9MDB 76103ec199 Update some FT-650 capabilities 2022-05-24 07:59:35 -05:00
Mike Black W9MDB fe7c465624 Add FT-650 rig -- same as FT847UNI 2022-05-24 07:43:50 -05:00
Mike Black W9MDB b1a4bb06ce Astyle files 2022-05-21 13:23:51 -05:00
Mike Black W9MDB c9d31337b9 Fix MICDATA ptt with rigctld and the few rigs which needs this -- e.g. TS-590, TS-480, TS-890, TS-990. VX-1700. ICF-8101 
https://github.com/Hamlib/Hamlib/issues/1033
 2022-05-20 09:06:17 -05:00
Mike Black W9MDB f6d5b7e3c6 Add some debug to kenwood.c 2022-05-20 09:03:02 -05:00
Mike Black W9MDB 85dfb1bed8 Make rotctld caps reflect underlying rotator -- removes const declaration from rot_caps 
This needs to be expanded to cover the other functions too
 2022-05-19 11:22:39 -05:00
Mike Black W9MDB 17539bb68a Add VFO UP DOWN to PowerSDR 2022-05-16 22:56:16 -05:00
Mike Black W9MDB 82a915563b Remove debug from barrett.c to prevent compilation warning 2022-05-15 09:31:09 -05:00
Mike Black W9MDB d54f5a1c34 Speed up yaesu compilation a bit when using -j switch in make by moving yaesu.c up the list 2022-05-15 09:17:51 -05:00
Mike Black W9MDB a518bdcaf1 Speed up icom compilation a bit when using -j switch in make by moving icom.c up the list 2022-05-15 09:15:27 -05:00
Mike Black W9MDB 51cbf4af7a For the FT-991 do not call get_narrow when mode is C4FM, PKTFM, or PKTFMN 2022-05-13 22:29:13 -05:00
Mike Black W9MDB 6f9d057162 astyle files getting ready for release 2022-05-13 16:50:13 -05:00
Mike Black W9MDB c63a71601a Fix newcat_get_mode for C4FM and PKTFMN 
https://github.com/Hamlib/Hamlib/issues/1027
 2022-05-13 15:19:04 -05:00
Mike Black W9MDB 066978ed15 Fix missing semicolon in newcat.c 2022-05-13 11:07:39 -05:00
Mike Black W9MDB ed1f0a22dc Fix missing semicolon in icom.c 2022-05-13 11:06:53 -05:00
Mike Black W9MDB cc73447d7c Fix missing semicolon in codan.c 2022-05-13 11:06:21 -05:00
Mike Black W9MDB 4bf2a8a2b8 Fix missing semicolon in k3.c 2022-05-13 11:03:55 -05:00
Mike Black W9MDB 3a569fcde1 Add vfo_op to PowerSdr 2022-05-12 17:47:16 -05:00
Mike Black W9MDB 11ffd603ab Add VFO_OP to PowerSDR for BAND_UP and BAND_DOWN 2022-05-12 09:44:00 -05:00
Mike Black W9MDB 6ad3ace726 Add FUNC_MUTE to K4 in k3.c 2022-05-11 16:36:02 -05:00
Mike Black W9MDB 019faf3b6a Add BU/BD commands to newcat.c validated with FA to get frequency of new band 
https://github.com/Hamlib/Hamlib/issues/1026
 2022-05-11 10:27:29 -05:00
Mike Black W9MDB e76cd71454 Add RIG_PASSBAND_NOCHANGE to dummy device 2022-05-10 12:20:18 -05:00
Mike Black W9MDB 8865bf6c66 Add rig_flush in newcat.c during set_powerstat 2022-05-09 07:25:39 -05:00
classabbyamp e9d9cb9eab
prm80: fix on musl 
to use timeval with musl libc, sys/time.h must be included.
 2022-05-08 11:52:08 -04:00
Mike Black W9MDB ab499d31eb Double up the PS0; command in newcat.c too 2022-05-08 06:44:29 -05:00
Mike Black W9MDB 1dd915a706 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-05-08 06:37:32 -05:00
Mike Black W9MDB e661642a7d Update Kenwood PS1 command to send PS1; twice instead of '\n' then PS1; 2022-05-08 06:36:50 -05:00
Mike Black W9MDB ddf0be7b72 Fix rig->state.rx_vfo and tx_vfo for Elecraft K4 2022-05-07 17:35:17 -05:00
Mike Black W9MDB 279bc84dfe Restrict extra 100ms time in k4_set_ptt to PTT_OFF 2022-05-06 13:35:04 -05:00
Mike Black W9MDB 6cc4aefdb0 Add 100ms more time to end of k4_set_ptt. 
Had one report of K4 infrequently not returning to RX from TX when in Fake It mode.
Suspect a little more time is needed between TQ0; response and FA freq set
 2022-05-06 13:31:34 -05:00
Mike Black W9MDB c0d298f0eb Change k4_set_ptt to remove infinite loop when REC is in use 
https://github.com/Hamlib/Hamlib/issues/1021
 2022-05-05 22:20:31 -05:00
Mike Black W9MDB 5259102cf1 Add detection of set_bwA to flrig.c 2022-05-04 17:46:40 -05:00
Mike Black W9MDB 24c7a0042a Fix newcat.c error 2022-05-04 16:23:42 -05:00
Mike Black W9MDB a079655290 Don't ask for VS command for some Yaeus rigs -- unnecessary warning occurs 2022-05-04 15:58:45 -05:00
Mike Black W9MDB cc7d9cd78d Remove redundant code in flrig.c 2022-05-04 15:43:01 -05:00
Mike Black W9MDB d60391fcb0 Fix k2/k3/k4 bandwidth to 10Hz rounding 2022-05-04 13:14:01 -05:00
Mike Black W9MDB 8cfa1f2f7d Fix flrig setting bandwidth on VFOB 2022-05-04 12:49:08 -05:00
Mike Black W9MDB e3bf699732 Fix k3.c compilation 2022-05-04 08:57:34 -05:00
Mike Black W9MDB 704a6aac4b Correct handling of max power output of KX2/KX3 with KXPA100 
Handle extended reply of K3
 2022-05-04 07:46:01 -05:00
Mike Black W9MDB 19c17eb5ba Add get_split to flrig_open 2022-05-03 12:02:57 -05:00
Mike Black W9MDB 79180089a6 Add default VD meter calibration for 200W yaesu rigs e.g. FTDX-101MP 2022-05-01 07:26:44 -05:00
Mike Black W9MDB f35e2d8c34 Fix newcat.c 2022-04-30 15:36:04 -05:00
Mike Black W9MDB 157eead021 In newcat.c only execute VS command if available 2022-04-30 15:33:44 -05:00
Mike Black W9MDB 5cce47e233 Change TEMP_METER to float 2022-04-30 13:44:09 -05:00
Mike Black W9MDB 829b632984 Make RIG_LEVEL_TEMP a bit more generic in newcat.c 2022-04-30 10:23:49 -05:00
Mike Black W9MDB d7da44a3b5 Add PKTUSB and PKTLSB to IC9100 2022-04-29 11:36:01 -05:00
Mike Black W9MDB 4b64d5f7c3 Fix get_vfo for FT757GX 2022-04-29 08:33:36 -05:00
Mike Black W9MDB e1c2a08789 For FT757GX to VFOA on startup 2022-04-29 06:41:38 -05:00
Mike Black W9MDB 5c1ed109a9 Add get_vfo to FT757GX using the cached vfo 2022-04-29 06:36:14 -05:00
Mike Black W9MDB a975d734ba One more time to try and get LEVEL_TEMP working in newcat.c 2022-04-28 14:41:57 -05:00
Mike Black W9MDB e05d040460 Try again to fix LEVEL_TEMP for newcat.c 2022-04-28 12:06:05 -05:00
Mike Black W9MDB 3529c789a8 Fix LEVEL_TEMP value in newcat.c 2022-04-28 11:30:32 -05:00
Mike Black W9MDB c8faa7a915 Change TEMP_METER to centigrade scale 2022-04-28 10:08:17 -05:00
Mike Black W9MDB 6ad3440341 Fix TEMP_METER level in newcat.c 2022-04-28 09:54:20 -05:00
Mike Black W9MDB c76dc1453d Forgot to commit kenwood.h 2022-04-27 10:14:27 -05:00
Mike Black W9MDB def3e6fea5 Add SDRUNO rig since it uses MD8 for DIG mode -- so PKTUSB will now be recognized for it 2022-04-27 10:11:41 -05:00
Mike Black W9MDB a006636ee3 Fix flrig_cat_string 2022-04-25 15:27:13 -05:00
Mike Black W9MDB 7cc2550ee3 Export flrig_cat_string for DLL 2022-04-25 12:47:27 -05:00
Mike Black W9MDB fbd7893192 Add cat_string to the raw send command in rigctl for FLRig 2022-04-25 12:42:27 -05:00
Mike Black W9MDB 5c61f55947 Add RIG_PARM_AFIF to allow rigs like IC-7300/9700/705 to select the AF/IF audio output 2022-04-25 10:15:54 -05:00
Mike Black W9MDB 07d2602950 Update documentation in ft1000mp.c 
https://github.com/Hamlib/Hamlib/issues/1014
 2022-04-22 16:39:42 -05:00
Mike Black W9MDB 871dcbe8a3 Add split functions to FT1000MP models 
ft1000mp_set_split_mode
ft1000mp_get_split_mode
ft100mp_get_split_freq_mode
https://github.com/Hamlib/Hamlib/issues/1014
 2022-04-21 17:08:06 -05:00
Mike Black W9MDB 0405498b07 Fix FT-817/818 set_split to set split cache 
https://github.com/Hamlib/Hamlib/issues/1012
 2022-04-19 18:10:41 -05:00
Mike Black W9MDB 4ac7d024e8 Make FT-817/FT-818 return cached VFOB freq when split and transmitting 
https://github.com/Hamlib/Hamlib/issues/1012
 2022-04-19 17:42:29 -05:00
Mike Black W9MDB 5427b4cf86 Promote UNTESTED to ALPHA -- assuming no news is good news 2022-04-16 22:47:51 -05:00
Mike Black W9MDB 0473702cb6 Promote rigs from ALPHA to BETA -- assuming no news is good news 2022-04-16 17:35:39 -05:00
Mike Black W9MDB 4e21730cd0 Promote all Kenwood BETA to STABLE -- assuming no news is good news 2022-04-16 17:32:47 -05:00
Mike Black W9MDB 9ee49933d7 Prompte all Icom rigs from BETA to STABLE and ALPHA to BETA 2022-04-16 17:30:15 -05:00
Mike Black W9MDB 86b737b95a Promote all Yaesu rigs from BETA to STABLE and ALPHA to BETA 2022-04-16 17:28:43 -05:00
Mike Black W9MDB 9df30be05f Promote all Icom ALPHA rigs to BETA -- assuming no news is good news 2022-04-16 17:27:05 -05:00
Mike Black W9MDB f5ee5c86fd Fix IC-F8101 set/get ptt to allow for ptt on ACC port 
https://github.com/Hamlib/Hamlib/issues/1010
 2022-04-16 16:59:26 -05:00
Mike Black W9MDB 770aa4e98a Stage 1 rigctld password working using MD5 hash 
Need to add Stage 2 which will be encryption using the MD5 hash as the key so the secret key nevers gets trasmitted
Then need to add a "by connection" capability as password is permanent across connections right now.
 2022-04-15 13:21:35 -05:00
Mike Black W9MDB 6846d164bf Add FT450D 2022-04-15 13:17:17 -05:00
Mike Black W9MDB 1bdb6ce2bf Add FT450D entry 2022-04-15 13:16:09 -05:00
PianetaRadio 4468b153e2
FT991 add RIG_FUNC_CSQL function 2022-04-08 09:48:32 +02:00
PianetaRadio d9c4997117
Update newcat.h 2022-04-08 09:44:09 +02:00
PianetaRadio b98f8bef25
Yaesu newcat, add RIG_FUNC_CSQL function 2022-04-08 09:43:26 +02:00
PianetaRadio 1710058bfa
FT991, fix max RF power for VHF/UHF bands 2022-04-08 09:16:21 +02:00
PianetaRadio 08456af0f8
FT897 add RIG_FUNC_CSQL 2022-04-07 12:53:29 +02:00
PianetaRadio ada37e07a9
FT857 add RIG_FUNC_CSQL 2022-04-07 12:45:00 +02:00
PianetaRadio 412121655d
Update ft817.c 2022-04-07 12:27:26 +02:00
PianetaRadio 20e2abf7bc
FT817 add RIG_FUNC_CSQL 2022-04-07 12:25:23 +02:00
PianetaRadio 769a3a559b
FT897 implement RIT on/off function 2022-04-04 20:07:17 +02:00
PianetaRadio 5d88b6579c
FT857 implement RIT on/off function 2022-04-04 19:58:31 +02:00
Mike Black W9MDB bf92f890b1 Update version in ft817.c 2022-04-02 22:17:51 -05:00
PianetaRadio d2dfa10d89
Implement RIT on/off function 2022-04-03 01:08:45 +02:00
Mike Black W9MDB 7671229529 Fix compilation warning in netrigctl.c 
https://github.com/Hamlib/Hamlib/issues/1000
 2022-04-02 16:21:10 -05:00
Mike Black W9MDB bd1ffcfb54 Add CWR CWN to newcat PTT off delay 2022-03-31 23:18:00 -05:00
Mike Black W9MDB acf80cea37 Update rotors from Untested to Alpha 2022-03-29 16:07:21 -05:00
Mike Black W9MDB fceac511ea Remove powerstat from TS950S/SDX as the rig does not have the PS command 
https://github.com/Hamlib/Hamlib/issues/999
 2022-03-27 16:24:37 -05:00
Mike Black W9MDB a57d1a4880 Fix get_split in FT-747 2022-03-27 07:24:05 -05:00
Mike Black W9MDB 3aa8f31dcd Start excluding some Icom rigs from checking x25 command 
Rigs like IC-751 don't even reject it and have to time out
 2022-03-26 09:18:52 -05:00
Mike Black W9MDB 56fc193323 Add IC-756 to list of Icom rigs that don't support dsp 
https://github.com/Hamlib/Hamlib/issues/997
 2022-03-24 17:55:59 -05:00
Mike Black W9MDB a830e1b6e1 For FT747GX do not try and read "extra" byte -- let rig_flush remove it -- faster 2022-03-24 16:21:53 -05:00
Mike Black W9MDB d6cfef6963 In icom.c rig_open limit 0x25 to one try 
Start eliminating rigs that will never have 0x25 too like the IC-751 for starters
 2022-03-23 23:02:49 -05:00
Mike Black W9MDB b40ec940e8 Fir FT747GX get_freq -- was reading 2 bytes too many 
Shorten up reading 345th byte from 100ms to 20ms timeout
https://github.com/Hamlib/Hamlib/issues/995
 2022-03-22 23:06:32 -05:00
PianetaRadio afc2776599
Update FTDX9000 caps with AGC values 2022-03-21 12:12:50 +01:00
PianetaRadio ded8e671c8
Update FT450 caps with AGC values 2022-03-21 12:05:54 +01:00
PianetaRadio f16194ca4c
Update FT1200 caps with agc levels 2022-03-20 21:04:48 +01:00
PianetaRadio c0b5d7982a
Update FT3000 caps with agc levels 2022-03-20 21:03:30 +01:00
Michael Black fb2997ff2c
Merge pull request #991 from PianetaRadio/master 
Update FT891 caps with agc levels
 2022-03-20 12:41:34 -05:00
Mike Black W9MDB 4e9962e90b Increase PowerSDR retries from 3 to 10 to allow for Flex 1500 band change delay 
https://github.com/Hamlib/Hamlib/issues/992
 2022-03-20 12:39:43 -05:00
PianetaRadio 3bb045cecc
Update FT891 caps with agc levels 2022-03-20 18:34:16 +01:00
PianetaRadio 5fb3405d1f
Update FT5000 caps with agc levels 2022-03-20 18:29:27 +01:00
PianetaRadio 8c514476e4
Update FTDX101 caps with agc levels 2022-03-20 18:21:45 +01:00
PianetaRadio 5ac1ba6452
Update FTDX10 caps with agc levels 2022-03-20 18:16:40 +01:00
PianetaRadio 36c6ce49f9
Update Yaesu FT950 caps with agc values 2022-03-20 18:08:06 +01:00
PianetaRadio 3659ede403
Update FT991 caps with agc levels 
#886
 2022-03-20 17:20:43 +01:00
PianetaRadio 575d6dd1af
Bandwidth list 
Updated according to CAT manual
 2022-03-19 17:32:48 +01:00
PianetaRadio 2f8d6e0f19
newcat_set_rx_bandwidth 
Typo correction in the list for Yaesu FT-991
 2022-03-19 17:30:13 +01:00
PianetaRadio 14b6941a01
Modes macro updated 
To meet update of ft991.c
 2022-03-19 17:18:32 +01:00
PianetaRadio 528da5dc9a
Update ft991.c 
Filter bandwidth list
 2022-03-19 17:12:12 +01:00
Mike Black W9MDB 1ef86d8e93 Add LEVEL_RFPOWER to PowerSDR 2022-03-18 22:42:47 -05:00
Mike Black W9MDB 56866fecd5 Allow kenwood rigs to retry all commands using ID; verfication method 
The actual cmd was only being sent once during the retry loop
https://github.com/Hamlib/Hamlib/issues/983
 2022-03-12 08:12:45 -06:00
Mike Black W9MDB c31e57fee7 Add some notes on FT847 serial numbers for unidirecitonal change 2022-03-07 22:16:59 -06:00
Mike Black W9MDB 21680572ab Attempt to fix power on for Yaesu rigs. ID was being sent before byte wakeup so disabled the ID query. 
https://github.com/Hamlib/Hamlib/issues/979
 2022-03-07 11:25:31 -06:00
Mike Black W9MDB 1993073559 Update version in flex6xxx.c 2022-03-06 09:28:52 -06:00
Mike Goodey a012e8e25d Add RIT and XIT for Flex 6xxx 2022-03-06 15:14:27 +00:00
Mike Black W9MDB 223d2b7c11 Add 200ms delay for K3/K3S when frequency changes by more then 1MHz (i.e. band change) 
https://github.com/Hamlib/Hamlib/issues/977
 2022-03-05 23:07:25 -06:00
Mike Black W9MDB 20019efe6d Fix netrigctl.c 2022-03-05 16:41:53 -06:00
Mike Black W9MDB 0333cdfca5 astyle files 2022-03-01 11:40:14 -06:00
Mike Black W9MDB 499198bf50 Basic rigctld password working -- still need to add secure method -- plain text right now 
https://github.com/Hamlib/Hamlib/issues/813
 2022-03-01 11:39:11 -06:00
Michael Black b3ff4b0167
Merge pull request #974 from OK1CTR/gomspace 
Gomspace GS100 transceiver frequency control
 2022-02-25 14:37:44 -06:00
OK1CTR f4cf909154 Added Android.mk, passed make distcheck. 2022-02-25 21:03:16 +01:00
Mike Black W9MDB 23280e812c Fix compilation warning on netrigctl.c 
https://github.com/Hamlib/Hamlib/issues/813
 2022-02-24 17:42:37 -06:00
Mike Black W9MDB 9ae519fc41 Working on password access for rigctld -- not fully implmented yet 
Need to check on security audit and cross-platform compilation first
https://github.com/Hamlib/Hamlib/issues/813
 2022-02-24 17:28:25 -06:00
OK1CTR ede7696878 Updated especially read_string() with flush flag. 2022-02-24 23:04:16 +01:00
OK1CTR 83e5b14cf6 Manually applied diff from older HamLib version. 2022-02-23 22:36:57 +01:00
Mike Black W9MDB d04f4b6b3b Add validation handling for SH and RF in newcat.c 
Fix FTDX10 SH command formatting
https://github.com/Hamlib/Hamlib/issues/973
 2022-02-21 08:26:49 -06:00
Michael Black 1874f3a92a
Merge pull request #972 from challinan/master 
Add support for K3 Morse send via KY(W) command
 2022-02-20 22:10:12 -06:00
challinan a41df58487 Add support for K3 Morse send via KY(W) command 2022-02-20 22:19:26 -05:00
Mike Black W9MDB 0cb6557749 Update version in newcat.h 2022-02-20 10:31:25 -06:00
Michael Black 9e762a3b10
Merge pull request #970 from jleh/ft991-meter-cal 
Yaesu meter calibrations
 2022-02-20 09:09:59 -06:00
Juuso Lehtinen 18dd9aa169 Add better defaults for newcat meter cals 2022-02-20 16:24:32 +02:00
Juuso Lehtinen 2d51b635c2 Add ID, VD & Comp meter cals for FT991 
Power level should return 0 when power is 0
 2022-02-20 16:18:02 +02:00
Mike Black W9MDB 92161c989a Balance RETURNFUNC 2022-02-19 16:50:35 -06:00
Mike Black W9MDB 7cc2ca30b0 Balance RETURNFUNC 2022-02-19 16:47:58 -06:00
Mike Black W9MDB 05fa5b8f60 Balance RETURNFUNC 2022-02-19 16:42:43 -06:00
Mike Black W9MDB 09ea2693c2 Balance RETURNFUNC 2022-02-19 16:39:50 -06:00
Mike Black W9MDB 7cf8ea393a Balance RETURNFUNC 2022-02-19 16:35:48 -06:00
Mike Black W9MDB 8073f745e0 Balance RETURNFUNC 2022-02-19 16:34:20 -06:00
Mike Black W9MDB 3752b7ef9f Balance RETURNFUNC 2022-02-19 16:33:54 -06:00
Mike Black W9MDB 453e831d63 Balance RETURNFUNC 2022-02-19 16:33:16 -06:00
Mike Black W9MDB 523a22359a Balance RETURNFUNC 2022-02-19 16:32:09 -06:00