Mike Black W9MDB
3b5f7a6dcf
Add and fix some cppcheck suppress items
...
https://github.com/Hamlib/Hamlib/issues/1351
2023-10-03 17:11:09 -05:00
Mike Black W9MDB
b40da0f6b0
Increase send_morse size to use maximum for rigs or 20 chars (if morse_qsize unknown)
...
This will still allow for up to 1023 characater to queue up.
No guarantees on which rigs allow for this queuing though.
Kenwood rigs can at least find the buffer status to wait for room but not all rigs do.
https://github.com/Hamlib/Hamlib/issues/1368
2023-08-19 12:36:07 -05:00
Mike Black W9MDB
d7d450df49
Add parm BANDSELECT for Yaesu rigs
...
'p BANDSELECT' returns current band of VFOA
'P BANDSELECT BAND160M' example selects the 160M band
'P BANDSELECT ?' shows bands available for the rig
Kenwood rigs will be next
Icom rigs TBD when Icom explains the return from 0x1a 0x01 -- no bandselect possible so manual setting of rig values
https://github.com/Hamlib/Hamlib/issues/1353
2023-08-11 10:40:42 -05:00
George Baltz N3GB
2f3c632ff6
Convert ANTIVOX & VOXGAIN
2023-07-27 15:01:55 -04:00
George Baltz N3GB
bb260d2640
Convert COMP
2023-07-26 16:58:26 -04:00
Daniele Forsi IU5HKX
a04abe6e04
[yaesu] Remove unused include of config.h
2023-02-14 19:30:51 +01:00
Mike Black W9MDB
7e81e8552a
FTDX5000 will now remember startup front/rear setting and restore it
...
Will also allow front/rear selection in WSJT-X/JTDX
https://github.com/Hamlib/Hamlib/issues/1195
2022-12-28 16:34:32 -06:00
Mike Black W9MDB
606aea1552
FT5000 cannot use RIG_PTT_ON_DATA/MIC menu 103 control and is now set for rear automatically too
...
https://github.com/Hamlib/Hamlib/issues/1193
2022-12-28 12:41:39 -06:00
PianetaRadio
033cc8a192
NB2
...
version update
2022-12-01 10:24:55 +01:00
Mike Black W9MDB
c844b02ed1
Fix dumpcap level_gran for Yaesu rigs
2022-11-11 16:56:42 -06:00
Mike Black W9MDB
bbeb87eb05
Add newcat_scan for Yaesu rigs
2022-10-21 22:27:58 -05:00
Mike Black W9MDB
36e88e705b
Increase write_delay in FT5000 to 1ms -- suspect it has similar problem to FT3000
...
https://github.com/Hamlib/Hamlib/issues/1080
2022-08-17 13:08:23 -05:00
Mike Black W9MDB
4677fb16d4
Change FTDX5000 to RIG_PTT_RIG_MICDATA and add logic to newcat.
2022-07-19 23:25:56 -05:00
Mike Black W9MDB
e5ba9c401a
Force FTDX5000 to 100ms CAT TIME OUT TIMER
...
https://github.com/Hamlib/Hamlib/issues/1080
2022-07-09 07:40:59 -05:00
Mike Black W9MDB
901cea8944
Add wait_morse to rigs that had send_morse but missing wait_morse
...
wait_morse only works on full break-in
https://github.com/Hamlib/Hamlib/issues/1043
2022-05-29 22:53:30 -05:00
PianetaRadio
5fb3405d1f
Update FT5000 caps with agc levels
2022-03-20 18:29:27 +01:00
Mike Black W9MDB
74b3d13d6a
Update hamlib_check_rig_caps
2022-02-11 11:44:18 -06:00
Mike Black W9MDB
68e121d82c
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
...
This is necessary to keep alignment between the client view of rig->state and the shared libarary view
Including PTHREAD functions in rig->state necessitated this as HAVE_PTHREAD only defined during hamlib compilation.
Clients including hamlib/rig.h did not pick up all the HAVE* config variable that control what gets included
https://github.com/Hamlib/Hamlib/issues/947
2022-02-04 07:41:36 -06:00
Mike Black W9MDB
b0ae08f7b7
Change rig_get_conf to rig_get_conf2 in Yaesu rigs
2022-01-10 17:22:33 -06:00
Mike Black W9MDB
01b7f81119
Add a data tag to the caps structure and a test in rig_init to ensure the data tag is where it is expected
...
Modify testrigcaps.c to test new data tag
This should detect any changes which corrupt rig_caps from additons/subtractions/changes to the structure
2021-12-31 23:49:29 -06:00
Mike Black W9MDB
7ea9eb3f13
Add power table to FTDX5000 since it's a 200W rig
2021-12-14 09:06:29 -06:00
Mikael Nousiainen
f71712b23b
Add contour, audio peak filter and keyer functions/levels for many Yaesu rigs
2021-11-20 21:28:26 +02:00
Mike Black W9MDB
49f3452bf2
Add send_morse to Yaesu rigs -- message is the number of the memory to be played
2021-10-17 17:53:02 -05:00
Mikael Nousiainen
252a3ead63
Add RIG_TARGETABLE_ROOFING to allow Yaesu roofing filter targeting by VFO only for FTDX5000 and FTDX101. Fix TS-480 VOXDELAY level definition.
2021-05-12 23:51:35 +03:00
Michael Black W9MDB
a5ca77a66f
Change all Yaeus rigs to 2 stop bits
...
https://github.com/Hamlib/Hamlib/issues/511
2021-01-16 22:45:17 -06:00
Michael Black W9MDB
19e819948f
Add RIG_TARGETABLE_ANT and fix Yaesu rigs -- Yaesu are only ones needing this right now
...
https://github.com/Hamlib/Hamlib/pull/495
2021-01-08 07:16:45 -06:00
Michael Black W9MDB
f4df454f73
Normalize Yaeus DX model names
2020-12-28 15:21:37 -06:00
Michael Black W9MDB
5fc36df249
astyle files
2020-11-30 14:53:55 -06:00
Mikael Nousiainen
e122955213
Add repeater offset support for many Yaesu newcat rigs and fix FT-991 repeater offset step
2020-11-09 22:18:57 +02:00
Mikael Nousiainen
c10606ed4f
Combine filters on AM/AMN and FM/FMN modes as the narrow setting changes the mode too
2020-11-08 00:09:41 +02:00
Mikael Nousiainen
9033fc2e78
Fix default filter width
2020-11-06 11:02:36 +02:00
Mikael Nousiainen
526fb21852
Add RX filter choices for FTDX 5000 and FTDX 3000. Go through the rest of the filter definitions and try to unify and fix any bugs. Add roofing filter support for FT-950 and FT-2000.
2020-11-06 10:35:21 +02:00
Mikael Nousiainen
0ad76ba38a
Fix a number of issues in Yaesu commands, all changes based on manuals
2020-11-05 11:05:37 +02:00
Mikael Nousiainen
5ba6059d2f
Start fixing Yaesu CWPITCH, BKINDL, ANTIVOX and COMP issues. Fix FT-991 NFM mode.
2020-11-05 00:07:53 +02:00
Mikael Nousiainen
ca00333c0f
Add roofing filter tables for all FTDX rigs. Move FTDX 3000 caps to a separate file. Fix FTDX rig naming.
2020-10-26 09:52:27 +02:00
Mikael Nousiainen
fea5ed875d
Add separate definitions for FTDX101 to make fixes for filters and modes. Fix many newcat commands for FTDX101 and some other newcat Yaesu rigs.
2020-10-23 00:04:43 +03:00
Michael Black W9MDB
d15c4da091
Remove COMP function from ft5000.c for ft3000 and use newcat routine instead
2020-10-15 15:28:46 -05:00
Michael Black W9MDB
ad5b87c9ae
Change RIG_TARGETABLE_PURE to RIG_TARGETABLE_LEVEL in ft5000.c
...
https://github.com/Hamlib/Hamlib/issues/414
2020-10-12 09:53:16 -05:00
Michael Black W9MDB
32b7063801
Fix FT101DX CWPITCH scale
...
https://github.com/Hamlib/Hamlib/issues/407
2020-10-09 16:27:45 -05:00
Michael Black W9MDB
fd8c05b01d
Fix IFSHIFT for FTDX101d
...
https://github.com/Hamlib/Hamlib/issues/394
2020-10-06 14:44:35 +01:00
Michael Black W9MDB
fcd55cdf8a
Fix FTDX101D RIG_FUNC_COMP
...
https://github.com/Hamlib/Hamlib/issues/392
2020-10-03 12:17:57 -05:00
Michael Black W9MDB
5fbb58f3ee
Add RIG_TARGETABLE_PURE to ftdx101 and ftdx5000
...
Change newcat_get_level and set_level check to RIG_TARGETABLE_PURE
https://github.com/Hamlib/Hamlib/issues/385
2020-09-28 08:54:19 -05:00
Michael Black W9MDB
f0dc0f71d4
Add RIG_TARGETABLE_FUNC and RIG_TARGETABLE_TONE to ftdx101d
...
Ensure VFO is only set on FUNC calls when TARGETABLE_FUNC is on for newcat.c
https://github.com/Hamlib/Hamlib/issues/385
2020-09-27 16:01:48 -05:00
Michael Black W9MDB
7bee01f785
Add suppress for AST broken bug in cppcheck
2020-09-19 16:09:44 -05:00
Michael Black W9MDB
10f7f8da70
Add 4m EUR to FTDX101D
2020-07-23 08:57:58 -05:00
Michael Black W9MDB
ec24abb6c6
Some more STABLE rigs
2020-07-16 15:38:44 -05:00
Michael Black W9MDB
677ccac4bc
astyle files
2020-05-27 12:23:08 -05:00
Michael Black W9MDB
3bf5382cf2
FT-5000 does have TARGETABLE_MODE
2020-05-26 11:42:31 -05:00
Michael Black
b040803765
Standard all version numbers to YYYYMMDD.N where n is intended for multiple versions in one day.
...
So typically .N will be .0
2020-03-29 23:03:21 -05:00
Michael Black
d856248178
Add RIG_MODEL macro and change all rigs to support it
2020-03-05 08:44:18 -06:00