mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Add roofing filter tables for all FTDX rigs. Move FTDX 3000 caps to a separate file. Fix FTDX rig naming.

pull/426/head
Mikael Nousiainen 2020-10-26 09:52:27 +02:00
rodzic 6e74284e55
commit ca00333c0f
11 zmienionych plików z 425 dodań i 278 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
include/hamlib/riglist.h
Wyświetl plik

@ -110,7 +110,7 @@
#define RIG_MODEL_FT980 RIG_MAKE_MODEL(RIG_YAESU, 31)
#define RIG_MODEL_FTDX5000 RIG_MAKE_MODEL(RIG_YAESU, 32)
#define RIG_MODEL_VX1700 RIG_MAKE_MODEL(RIG_YAESU, 33)
#define RIG_MODEL_FT1200 RIG_MAKE_MODEL(RIG_YAESU, 34)
#define RIG_MODEL_FTDX1200 RIG_MAKE_MODEL(RIG_YAESU, 34)
#define RIG_MODEL_FT991 RIG_MAKE_MODEL(RIG_YAESU, 35)
#define RIG_MODEL_FT891 RIG_MAKE_MODEL(RIG_YAESU, 36)
#define RIG_MODEL_FTDX3000 RIG_MAKE_MODEL(RIG_YAESU, 37)

2
rigs/yaesu/Makefile.am
Wyświetl plik

@ -10,7 +10,7 @@ YAESUSRC = ft100.c ft100.h ft747.c ft747.h ft817.c ft817.h ft847.c ft847.h \
## Yaesu radios that use the new Kenwood style CAT commands
NEWCATSRC = newcat.c newcat.h ft450.c ft450.h ft950.c ft950.h ft991.c ft991.h \
ft2000.c ft2000.h ft9000.c ft9000.h ft5000.c ft5000.h ft1200.c ft1200.h \
ft891.c ft891.h ftdx101.c ftdx101.h
ft891.c ft891.h ftdx101.c ftdx101.h ft3000.c
noinst_LTLIBRARIES = libhamlib-yaesu.la
libhamlib_yaesu_la_SOURCES = $(YAESUSRC) $(NEWCATSRC) yaesu.c yaesu.h

124
rigs/yaesu/ft1200.c
Wyświetl plik

@ -1,7 +1,7 @@
/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft2000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* ft1200.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008
* (C) Terry Embry 2008-2009
* ft1200.c - (C) David Fannin 2015 (kk6df at arrl.net)
@ -33,24 +33,57 @@
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft1200.h"
#include "idx_builtin.h"
#include "tones.h"
/*
* ft1200 rigs capabilities.
* Also this struct is READONLY!
*
*/
const struct rig_caps ft1200_caps =
const struct newcat_priv_caps ftdx1200_priv_caps =
{
RIG_MODEL(RIG_MODEL_FT1200),
.model_name = "FT-1200",
.roofing_filter_count = 7,
.roofing_filters =
{
// The index must match ext level combo index
{ .index = 0, .set_value = '0', .get_value = 0, .width = 15000, .optional = 0 },
{ .index = 1, .set_value = '1', .get_value = '1', .width = 15000, .optional = 0 },
{ .index = 2, .set_value = '2', .get_value = '2', .width = 6000, .optional = 0 },
{ .index = 3, .set_value = '3', .get_value = '3', .width = 3000, .optional = 0 },
{ .index = 4, .set_value = 0, .get_value = '4', .width = 15000, .optional = 0 },
{ .index = 5, .set_value = 0, .get_value = '5', .width = 6000, .optional = 0 },
{ .index = 6, .set_value = 0, .get_value = '6', .width = 3000, .optional = 0 },
}
};
const struct confparams ftdx1200_ext_levels[] =
{
{
TOK_ROOFING_FILTER,
"ROOFINGFILTER",
"Roofing filter",
"Roofing filter",
NULL,
RIG_CONF_COMBO,
{ .c = { .combostr = {
"AUTO", "15 kHz", "6 kHz", "3 kHz",
"AUTO - 15 kHz", "AUTO - 6 kHz", "AUTO - 3 kHz",
NULL }
} }
},
{ RIG_CONF_END, NULL, }
};
int ftdx1200_ext_tokens[] =
{
TOK_ROOFING_FILTER, TOK_BACKEND_NONE
};
/*
* FTDX 1200 rig capabilities
*/
const struct rig_caps ftdx1200_caps =
{
RIG_MODEL(RIG_MODEL_FTDX1200),
.model_name = "FTDX 1200",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".0",
.copyright = "LGPL",
@ -65,14 +98,14 @@ const struct rig_caps ft1200_caps =
.serial_stop_bits = 1, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FT1200_WRITE_DELAY,
.post_write_delay = FT1200_POST_WRITE_DELAY,
.write_delay = FTDX1200_WRITE_DELAY,
.post_write_delay = FTDX1200_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 3,
.has_get_func = FT1200_FUNCS,
.has_set_func = FT1200_FUNCS,
.has_get_level = FT1200_LEVELS,
.has_set_level = RIG_LEVEL_SET(FT1200_LEVELS),
.has_get_func = FTDX1200_FUNCS,
.has_set_func = FTDX1200_FUNCS,
.has_get_level = FTDX1200_LEVELS,
.has_set_level = RIG_LEVEL_SET(FTDX1200_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
@ -87,12 +120,12 @@ const struct rig_caps ft1200_caps =
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1000),
.vfo_ops = FT1200_VFO_OPS,
.vfo_ops = FTDX1200_VFO_OPS,
.targetable_vfo = RIG_TARGETABLE_FREQ,
.transceive = RIG_TRN_OFF, /* May enable later as the 1200 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.str_cal = FT1200_STR_CAL,
.str_cal = FTDX1200_STR_CAL,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
@ -101,42 +134,42 @@ const struct rig_caps ft1200_caps =
.rx_range_list1 = {
/* General coverage + ham, ANT_5 is RX only antenna */
{kHz(30), MHz(56), FT1200_ALL_RX_MODES, -1, -1, FT1200_VFO_ALL, FT1200_TX_ANTS},
{kHz(30), MHz(56), FTDX1200_ALL_RX_MODES, -1, -1, FTDX1200_VFO_ALL, FTDX1200_TX_ANTS},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FT1200_OTHER_TX_MODES, W(5), W(100), FT1200_VFO_ALL, FT1200_TX_ANTS),
FRQ_RNG_HF(1, FT1200_AM_TX_MODES, W(2), W(25), FT1200_VFO_ALL, FT1200_TX_ANTS), /* AM class */
FRQ_RNG_6m(1, FT1200_OTHER_TX_MODES, W(5), W(100), FT1200_VFO_ALL, FT1200_TX_ANTS),
FRQ_RNG_6m(1, FT1200_AM_TX_MODES, W(2), W(25), FT1200_VFO_ALL, FT1200_TX_ANTS), /* AM class */
FRQ_RNG_HF(1, FTDX1200_OTHER_TX_MODES, W(5), W(100), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS),
FRQ_RNG_HF(1, FTDX1200_AM_TX_MODES, W(2), W(25), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS), /* AM class */
FRQ_RNG_6m(1, FTDX1200_OTHER_TX_MODES, W(5), W(100), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS),
FRQ_RNG_6m(1, FTDX1200_AM_TX_MODES, W(2), W(25), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(56), FT1200_ALL_RX_MODES, -1, -1, FT1200_VFO_ALL, FT1200_TX_ANTS},
{kHz(30), MHz(56), FTDX1200_ALL_RX_MODES, -1, -1, FTDX1200_VFO_ALL, FTDX1200_TX_ANTS},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FT1200_OTHER_TX_MODES, W(5), W(100), FT1200_VFO_ALL, FT1200_TX_ANTS),
FRQ_RNG_HF(2, FT1200_AM_TX_MODES, W(2), W(25), FT1200_VFO_ALL, FT1200_TX_ANTS), /* AM class */
FRQ_RNG_6m(2, FT1200_OTHER_TX_MODES, W(5), W(100), FT1200_VFO_ALL, FT1200_TX_ANTS),
FRQ_RNG_6m(2, FT1200_AM_TX_MODES, W(2), W(25), FT1200_VFO_ALL, FT1200_TX_ANTS), /* AM class */
FRQ_RNG_HF(2, FTDX1200_OTHER_TX_MODES, W(5), W(100), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS),
FRQ_RNG_HF(2, FTDX1200_AM_TX_MODES, W(2), W(25), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS), /* AM class */
FRQ_RNG_6m(2, FTDX1200_OTHER_TX_MODES, W(5), W(100), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS),
FRQ_RNG_6m(2, FTDX1200_AM_TX_MODES, W(2), W(25), FTDX1200_VFO_ALL, FTDX1200_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FT1200_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FT1200_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FTDX1200_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FTDX1200_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FT1200_AM_RX_MODES, Hz(100)}, /* Normal */
{FT1200_AM_RX_MODES, kHz(1)}, /* Fast */
{FTDX1200_AM_RX_MODES, Hz(100)}, /* Normal */
{FTDX1200_AM_RX_MODES, kHz(1)}, /* Fast */
{FT1200_FM_RX_MODES, Hz(100)}, /* Normal */
{FT1200_FM_RX_MODES, kHz(1)}, /* Fast */
{FTDX1200_FM_RX_MODES, Hz(100)}, /* Normal */
{FTDX1200_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
@ -144,21 +177,24 @@ const struct rig_caps ft1200_caps =
/* mode/filter list, .remember = order matters! */
.filters = {
{FT1200_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Normal CW, RTTY, PKT/USER */
{FT1200_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FT1200_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{FTDX1200_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Normal CW, RTTY, PKT/USER */
{FTDX1200_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FTDX1200_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(4000)}, /* Wide SSB */
{RIG_MODE_AM, Hz(9000)}, /* Normal AM */
{RIG_MODE_AM, Hz(6000)}, /* Narrow AM */
{FT1200_FM_RX_MODES, Hz(12000)}, /* Normal FM */
{FT1200_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
{FTDX1200_FM_RX_MODES, Hz(12000)}, /* Normal FM */
{FTDX1200_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
RIG_FLT_END,
},
.priv = NULL,
.ext_tokens = ftdx1200_ext_tokens,
.extlevels = ftdx1200_ext_levels,
.priv = &ftdx1200_priv_caps,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
@ -208,5 +244,7 @@ const struct rig_caps ft1200_caps =
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
.set_ext_level = newcat_set_ext_level,
.get_ext_level = newcat_get_ext_level,
};

50
rigs/yaesu/ft1200.h
Wyświetl plik

@ -1,7 +1,7 @@
/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft2000.h - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* ft1200.h - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008
*
* ft1200.h - (C) David Fannin 2015 (kk6df at arrl.net)
@ -26,31 +26,31 @@
*/
#ifndef _FT1200_H
#define _FT1200_H 1
#ifndef _FTDX1200_H
#define _FTDX1200_H 1
#define FT1200_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define FTDX1200_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
/* Receiver caps */
#define FT1200_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
#define FTDX1200_ALL_RX_MODES (RIG_MODE_AM|RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM|RIG_MODE_FM)
#define FT1200_SSB_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
#define FTDX1200_SSB_CW_RX_MODES (RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_SSB|\
RIG_MODE_RTTY|RIG_MODE_RTTYR|RIG_MODE_PKTLSB|RIG_MODE_PKTUSB)
#define FT1200_AM_RX_MODES (RIG_MODE_AM)
#define FT1200_FM_RX_MODES (RIG_MODE_FM|RIG_MODE_PKTFM)
#define FT1200_CW_RTTY_PKT_RX_MODES (RIG_MODE_RTTY|RIG_MODE_RTTYR|\
#define FTDX1200_AM_RX_MODES (RIG_MODE_AM)
#define FTDX1200_FM_RX_MODES (RIG_MODE_FM|RIG_MODE_PKTFM)
#define FTDX1200_CW_RTTY_PKT_RX_MODES (RIG_MODE_RTTY|RIG_MODE_RTTYR|\
RIG_MODE_PKTUSB|RIG_MODE_PKTLSB|RIG_MODE_CW|RIG_MODE_CWR)
/* TRX caps */
#define FT1200_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY| \
#define FTDX1200_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_RTTY| \
RIG_MODE_PKTLSB|RIG_MODE_PKTUSB|RIG_MODE_PKTFM|RIG_MODE_FM) /* 100 W class */
#define FT1200_AM_TX_MODES (RIG_MODE_AM) /* set 25W max */
#define FTDX1200_AM_TX_MODES (RIG_MODE_AM) /* set 25W max */
/* TBC */
#define FT1200_LEVELS (RIG_LEVEL_ATT|RIG_LEVEL_PREAMP|\
#define FTDX1200_LEVELS (RIG_LEVEL_ATT|RIG_LEVEL_PREAMP|\
RIG_LEVEL_ALC|RIG_LEVEL_RAWSTR|RIG_LEVEL_STRENGTH|RIG_LEVEL_SWR|\
RIG_LEVEL_RFPOWER|RIG_LEVEL_RF|RIG_LEVEL_SQL|\
RIG_LEVEL_MICGAIN|RIG_LEVEL_IF|RIG_LEVEL_CWPITCH|\
@ -62,18 +62,18 @@
RIG_LEVEL_COMP_METER|RIG_LEVEL_VD_METER|RIG_LEVEL_ID_METER)
/* TBC */
#define FT1200_FUNCS (RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_LOCK|\
#define FTDX1200_FUNCS (RIG_FUNC_TONE|RIG_FUNC_TSQL|RIG_FUNC_LOCK|\
RIG_FUNC_MON|RIG_FUNC_NB|RIG_FUNC_NR|RIG_FUNC_VOX|\
RIG_FUNC_FBKIN|RIG_FUNC_COMP|RIG_FUNC_ANF|RIG_FUNC_MN|\
RIG_FUNC_TUNER)
/* TBC */
#define FT1200_VFO_OPS (RIG_OP_TUNE|RIG_OP_CPY|RIG_OP_XCHG|\
#define FTDX1200_VFO_OPS (RIG_OP_TUNE|RIG_OP_CPY|RIG_OP_XCHG|\
RIG_OP_UP|RIG_OP_DOWN|RIG_OP_BAND_UP|RIG_OP_BAND_DOWN|\
RIG_OP_TO_VFO|RIG_OP_FROM_VFO|RIG_OP_TOGGLE)
/* TBC */
#define FT1200_STR_CAL { 16, \
#define FTDX1200_STR_CAL { 16, \
{ \
{ 0, -54 }, /* S0 */ \
{ 12, -48 }, /* S1 */ \
@ -99,14 +99,14 @@
*
*/
#define FT1200_TX_ANTS (RIG_ANT_1|RIG_ANT_2)
#define FTDX1200_TX_ANTS (RIG_ANT_1|RIG_ANT_2)
#define FT1200_MEM_CHNL_LENGTH 1 /* 0x10 P1 = 01 return size */
#define FT1200_OP_DATA_LENGTH 19 /* 0x10 P1 = 03 return size */
#define FT1200_VFO_DATA_LENGTH 18 /* 0x10 P1 = 03 return size -- A & B returned */
#define FT1200_MEM_CHNL_DATA_LENGTH 19 /* 0x10 P1 = 04, P4 = 0x01-0x20 return size */
#define FT1200_STATUS_FLAGS_LENGTH 5 /* 0xf7, 0xfa return size */
#define FT1200_ALL_DATA_LENGTH 649 /* 0x10 P1 = 00 return size */
#define FTDX1200_MEM_CHNL_LENGTH 1 /* 0x10 P1 = 01 return size */
#define FTDX1200_OP_DATA_LENGTH 19 /* 0x10 P1 = 03 return size */
#define FTDX1200_VFO_DATA_LENGTH 18 /* 0x10 P1 = 03 return size -- A & B returned */
#define FTDX1200_MEM_CHNL_DATA_LENGTH 19 /* 0x10 P1 = 04, P4 = 0x01-0x20 return size */
#define FTDX1200_STATUS_FLAGS_LENGTH 5 /* 0xf7, 0xfa return size */
#define FTDX1200_ALL_DATA_LENGTH 649 /* 0x10 P1 = 00 return size */
/* Timing values in mS */
@ -116,11 +116,11 @@
/* Delay between bytes sent to FT-2000
* Should not exceed value set in CAT TOT menu (rig default is 10 mSec)
*/
#define FT1200_WRITE_DELAY 0
#define FTDX1200_WRITE_DELAY 0
/* Delay sequential fast writes */
#define FT1200_POST_WRITE_DELAY 5
#define FTDX1200_POST_WRITE_DELAY 5
#endif /* _FT1200_H */
#endif /* _FTDX1200_H */

254
rigs/yaesu/ft3000.c 100644
Wyświetl plik

@ -0,0 +1,254 @@
/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft3000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008-2010
* (C) Terry Embry 2008-2009
*
* This shared library provides an API for communicating
* via serial interface to an FT-DX3000 using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "hamlib/rig.h"
#include "bandplan.h"
#include "newcat.h"
#include "ft5000.h"
#include "idx_builtin.h"
#include "tones.h"
const struct newcat_priv_caps ftdx3000_priv_caps =
{
.roofing_filter_count = 11,
.roofing_filters =
{
// The index must match ext level combo index
{ .index = 0, .set_value = '0', .get_value = 0, .width = 15000, .optional = 0 },
{ .index = 1, .set_value = '1', .get_value = '1', .width = 15000, .optional = 0 },
{ .index = 2, .set_value = '2', .get_value = '2', .width = 6000, .optional = 0 },
{ .index = 3, .set_value = '3', .get_value = '3', .width = 3000, .optional = 0 },
{ .index = 4, .set_value = '4', .get_value = '7', .width = 600, .optional = 0 },
{ .index = 5, .set_value = '5', .get_value = '8', .width = 300, .optional = 0 },
{ .index = 6, .set_value = 0, .get_value = '4', .width = 15000, .optional = 0 },
{ .index = 7, .set_value = 0, .get_value = '5', .width = 6000, .optional = 0 },
{ .index = 8, .set_value = 0, .get_value = '6', .width = 3000, .optional = 0 },
{ .index = 9, .set_value = 0, .get_value = '9', .width = 600, .optional = 0 },
{ .index = 10, .set_value = 0, .get_value = 'A', .width = 300, .optional = 0 },
}
};
const struct confparams ftdx3000_ext_levels[] =
{
{
TOK_ROOFING_FILTER,
"ROOFINGFILTER",
"Roofing filter",
"Roofing filter",
NULL,
RIG_CONF_COMBO,
{ .c = { .combostr = {
"AUTO", "15 kHz", "6 kHz", "3 kHz", "600 Hz", "300 Hz",
"AUTO - 15 kHz", "AUTO - 6 kHz", "AUTO - 3 kHz", "AUTO - 600 Hz", "AUTO - 300 Hz",
NULL }
} }
},
{ RIG_CONF_END, NULL, }
};
int ftdx3000_ext_tokens[] =
{
TOK_ROOFING_FILTER, TOK_BACKEND_NONE
};
/*
* FTDX 3000 rig capabilities
* Seems to be largely compatible with the FTDX 5000,
* so this is just a copy of the FTDX 5000 caps.
* It really needs to be reviewed for accuracy, but it works for WSJT-X.
*/
const struct rig_caps ftdx3000_caps =
{
RIG_MODEL(RIG_MODEL_FTDX3000),
.model_name = "FTDX 3000",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800, /* Default rate per manual */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FTDX5000_WRITE_DELAY,
.post_write_delay = FTDX5000_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 3,
.has_get_func = FTDX5000_FUNCS,
.has_set_func = FTDX5000_FUNCS,
.has_get_level = FTDX5000_LEVELS,
.has_set_level = RIG_LEVEL_SET(FTDX5000_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 1050 }, .step = { .i = 50 } },
},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* TBC */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1000),
.vfo_ops = FTDX5000_VFO_OPS,
.targetable_vfo = RIG_TARGETABLE_FREQ, /* one of the few diffs from the 5000 */
.transceive = RIG_TRN_OFF, /* May enable later as the 5000 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.str_cal = FTDX5000_STR_CAL,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = {
/* General coverage + ham, ANT_5 is RX only antenna */
{kHz(30), MHz(60), FTDX5000_ALL_RX_MODES, -1, -1, FTDX5000_VFO_ALL, FTDX5000_TX_ANTS | RIG_ANT_5, "USA"},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_HF(1, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
FRQ_RNG_6m(1, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_6m(1, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(60), FTDX5000_ALL_RX_MODES, -1, -1, FTDX5000_VFO_ALL, FTDX5000_TX_ANTS | RIG_ANT_5, "EUR"},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_HF(2, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
FRQ_RNG_6m(2, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_6m(2, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FTDX5000_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FTDX5000_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FTDX5000_AM_RX_MODES, Hz(100)}, /* Normal */
{FTDX5000_AM_RX_MODES, kHz(1)}, /* Fast */
{FTDX5000_FM_RX_MODES, Hz(100)}, /* Normal */
{FTDX5000_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(1800)}, /* Normal CW, RTTY, PKT/USER */
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(3000)}, /* Wide SSB */
{RIG_MODE_AM, Hz(9000)}, /* Normal AM */
{RIG_MODE_AM, Hz(6000)}, /* Narrow AM */
{FTDX5000_FM_RX_MODES, Hz(15000)}, /* Normal FM */
{FTDX5000_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
RIG_FLT_END,
},
.ext_tokens = ftdx3000_ext_tokens,
.extlevels = ftdx3000_ext_levels,
.priv = &ftdx3000_priv_caps,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
.rig_open = newcat_open, /* port opened */
.rig_close = newcat_close, /* port closed */
.cfgparams = newcat_cfg_params,
.set_conf = newcat_set_conf,
.get_conf = newcat_get_conf,
.set_freq = newcat_set_freq,
.get_freq = newcat_get_freq,
.set_mode = newcat_set_mode,
.get_mode = newcat_get_mode,
.set_vfo = newcat_set_vfo,
.get_vfo = newcat_get_vfo,
.set_ptt = newcat_set_ptt,
.get_ptt = newcat_get_ptt,
.set_split_vfo = newcat_set_split_vfo,
.get_split_vfo = newcat_get_split_vfo,
.set_rit = newcat_set_rit,
.get_rit = newcat_get_rit,
.set_xit = newcat_set_xit,
.get_xit = newcat_get_xit,
.set_ant = newcat_set_ant,
.get_ant = newcat_get_ant,
.get_func = newcat_get_func,
.set_func = newcat_set_func,
.get_level = newcat_get_level,
.set_level = newcat_set_level,
.get_mem = newcat_get_mem,
.set_mem = newcat_set_mem,
.vfo_op = newcat_vfo_op,
.get_info = newcat_get_info,
.power2mW = newcat_power2mW,
.mW2power = newcat_mW2power,
.set_rptr_shift = newcat_set_rptr_shift,
.get_rptr_shift = newcat_get_rptr_shift,
.set_ctcss_tone = newcat_set_ctcss_tone,
.get_ctcss_tone = newcat_get_ctcss_tone,
.set_ctcss_sql = newcat_set_ctcss_sql,
.get_ctcss_sql = newcat_get_ctcss_sql,
.set_powerstat = newcat_set_powerstat,
.get_powerstat = newcat_get_powerstat,
.get_ts = newcat_get_ts,
.set_ts = newcat_set_ts,
.set_trn = newcat_set_trn,
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
.set_ext_level = newcat_set_ext_level,
.get_ext_level = newcat_get_ext_level,
};

234
rigs/yaesu/ft5000.c
Wyświetl plik

@ -1,7 +1,7 @@
/*
* hamlib - (C) Frank Singleton 2000 (javabear at users.sourceforge.net)
*
* ft2000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* ft5000.c - (C) Nate Bargmann 2007 (n0nb at arrl.net)
* (C) Stephane Fillod 2008-2010
* (C) Terry Embry 2008-2009
*
@ -25,31 +25,64 @@
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft5000.h"
#include "idx_builtin.h"
#include "tones.h"
/*
* ft5000 rigs capabilities.
* Also this struct is READONLY!
*
*/
const struct newcat_priv_caps ftdx5000_priv_caps =
{
.roofing_filter_count = 11,
.roofing_filters =
{
// The index must match ext level combo index
{ .index = 0, .set_value = '0', .get_value = 0, .width = 15000, .optional = 0 },
{ .index = 1, .set_value = '1', .get_value = '1', .width = 15000, .optional = 0 },
{ .index = 2, .set_value = '2', .get_value = '2', .width = 6000, .optional = 0 },
{ .index = 3, .set_value = '3', .get_value = '3', .width = 3000, .optional = 0 },
{ .index = 4, .set_value = '4', .get_value = '7', .width = 600, .optional = 0 },
{ .index = 5, .set_value = '5', .get_value = '8', .width = 300, .optional = 0 },
{ .index = 6, .set_value = 0, .get_value = '4', .width = 15000, .optional = 0 },
{ .index = 7, .set_value = 0, .get_value = '5', .width = 6000, .optional = 0 },
{ .index = 8, .set_value = 0, .get_value = '6', .width = 3000, .optional = 0 },
{ .index = 9, .set_value = 0, .get_value = '9', .width = 600, .optional = 0 },
{ .index = 10, .set_value = 0, .get_value = 'A', .width = 300, .optional = 0 },
}
};
const struct confparams ftdx5000_ext_levels[] =
{
{
TOK_ROOFING_FILTER,
"ROOFINGFILTER",
"Roofing filter",
"Roofing filter",
NULL,
RIG_CONF_COMBO,
{ .c = { .combostr = {
"AUTO", "15 kHz", "6 kHz", "3 kHz", "600 Hz (Main)", "300 Hz (Main)",
"AUTO - 15 kHz", "AUTO - 6 kHz", "AUTO - 3 kHz", "AUTO - 600 Hz (Main)", "AUTO - 300 Hz (Main)",
NULL }
} }
},
{ RIG_CONF_END, NULL, }
};
int ftdx5000_ext_tokens[] =
{
TOK_ROOFING_FILTER, TOK_BACKEND_NONE
};
const struct rig_caps ftdx5000_caps =
{
RIG_MODEL(RIG_MODEL_FTDX5000),
.model_name = "FT-DX5000",
.model_name = "FTDX 5000",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".0",
.copyright = "LGPL",
@ -157,179 +190,10 @@ const struct rig_caps ftdx5000_caps =
RIG_FLT_END,
},
.priv = NULL,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
.rig_open = newcat_open, /* port opened */
.rig_close = newcat_close, /* port closed */
.cfgparams = newcat_cfg_params,
.set_conf = newcat_set_conf,
.get_conf = newcat_get_conf,
.set_freq = newcat_set_freq,
.get_freq = newcat_get_freq,
.set_mode = newcat_set_mode,
.get_mode = newcat_get_mode,
.set_vfo = newcat_set_vfo,
.get_vfo = newcat_get_vfo,
.set_ptt = newcat_set_ptt,
.get_ptt = newcat_get_ptt,
.set_split_vfo = newcat_set_split_vfo,
.get_split_vfo = newcat_get_split_vfo,
.set_rit = newcat_set_rit,
.get_rit = newcat_get_rit,
.set_xit = newcat_set_xit,
.get_xit = newcat_get_xit,
.set_ant = newcat_set_ant,
.get_ant = newcat_get_ant,
.get_func = newcat_get_func,
.set_func = newcat_set_func,
.get_level = newcat_get_level,
.set_level = newcat_set_level,
.get_mem = newcat_get_mem,
.set_mem = newcat_set_mem,
.vfo_op = newcat_vfo_op,
.get_info = newcat_get_info,
.power2mW = newcat_power2mW,
.mW2power = newcat_mW2power,
.set_rptr_shift = newcat_set_rptr_shift,
.get_rptr_shift = newcat_get_rptr_shift,
.set_ctcss_tone = newcat_set_ctcss_tone,
.get_ctcss_tone = newcat_get_ctcss_tone,
.set_ctcss_sql = newcat_set_ctcss_sql,
.get_ctcss_sql = newcat_get_ctcss_sql,
.set_powerstat = newcat_set_powerstat,
.get_powerstat = newcat_get_powerstat,
.get_ts = newcat_get_ts,
.set_ts = newcat_set_ts,
.set_trn = newcat_set_trn,
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
};
/*
* ft3000 rig capabilities.
* Seems to be largely compatible with the ft5000
* So this is just a copy of the 5000 caps
* Also this struct is READONLY!
* It really needs to be reviewed for accuracy but it works for WSJT-X
*
*/
const struct rig_caps ftdx3000_caps =
{
RIG_MODEL(RIG_MODEL_FTDX3000),
.model_name = "FT-DX3000",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".2",
.copyright = "LGPL",
.status = RIG_STATUS_STABLE,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_RIG,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 4800, /* Default rate per manual */
.serial_rate_max = 38400,
.serial_data_bits = 8,
.serial_stop_bits = 1, /* Assumed since manual makes no mention */
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_HARDWARE,
.write_delay = FTDX5000_WRITE_DELAY,
.post_write_delay = FTDX5000_POST_WRITE_DELAY,
.timeout = 2000,
.retry = 3,
.has_get_func = FTDX5000_FUNCS,
.has_set_func = FTDX5000_FUNCS,
.has_get_level = FTDX5000_LEVELS,
.has_set_level = RIG_LEVEL_SET(FTDX5000_LEVELS),
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
[LVL_CWPITCH] = { .min = { .i = 300 }, .max = { .i = 1050 }, .step = { .i = 50 } },
},
.ctcss_list = common_ctcss_list,
.dcs_list = NULL,
.preamp = { 10, 20, RIG_DBLST_END, }, /* TBC */
.attenuator = { 6, 12, 18, RIG_DBLST_END, },
.max_rit = Hz(9999),
.max_xit = Hz(9999),
.max_ifshift = Hz(1000),
.vfo_ops = FTDX5000_VFO_OPS,
.targetable_vfo = RIG_TARGETABLE_FREQ, /* one of the few diffs from the 5000 */
.transceive = RIG_TRN_OFF, /* May enable later as the 5000 has an Auto Info command */
.bank_qty = 0,
.chan_desc_sz = 0,
.str_cal = FTDX5000_STR_CAL,
.chan_list = {
{ 1, 99, RIG_MTYPE_MEM, NEWCAT_MEM_CAP },
{ 100, 117, RIG_MTYPE_EDGE, NEWCAT_MEM_CAP }, /* two by two */
RIG_CHAN_END,
},
.rx_range_list1 = {
/* General coverage + ham, ANT_5 is RX only antenna */
{kHz(30), MHz(60), FTDX5000_ALL_RX_MODES, -1, -1, FTDX5000_VFO_ALL, FTDX5000_TX_ANTS | RIG_ANT_5, "USA"},
RIG_FRNG_END,
},
.tx_range_list1 = {
FRQ_RNG_HF(1, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_HF(1, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
FRQ_RNG_6m(1, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_6m(1, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.rx_range_list2 = {
{kHz(30), MHz(60), FTDX5000_ALL_RX_MODES, -1, -1, FTDX5000_VFO_ALL, FTDX5000_TX_ANTS | RIG_ANT_5, "EUR"},
RIG_FRNG_END,
},
.tx_range_list2 = {
FRQ_RNG_HF(2, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_HF(2, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
FRQ_RNG_6m(2, FTDX5000_OTHER_TX_MODES, W(5), W(200), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS),
FRQ_RNG_6m(2, FTDX5000_AM_TX_MODES, W(2), W(75), FTDX5000_VFO_ALL, FTDX5000_TX_ANTS), /* AM class */
RIG_FRNG_END,
},
.tuning_steps = {
{FTDX5000_SSB_CW_RX_MODES, Hz(10)}, /* Normal */
{FTDX5000_SSB_CW_RX_MODES, Hz(100)}, /* Fast */
{FTDX5000_AM_RX_MODES, Hz(100)}, /* Normal */
{FTDX5000_AM_RX_MODES, kHz(1)}, /* Fast */
{FTDX5000_FM_RX_MODES, Hz(100)}, /* Normal */
{FTDX5000_FM_RX_MODES, kHz(1)}, /* Fast */
RIG_TS_END,
},
/* mode/filter list, .remember = order matters! */
.filters = {
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(1800)}, /* Normal CW, RTTY, PKT/USER */
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(500)}, /* Narrow CW, RTTY, PKT/USER */
{FTDX5000_CW_RTTY_PKT_RX_MODES, Hz(2400)}, /* Wide CW, RTTY, PKT/USER */
{RIG_MODE_SSB, Hz(2400)}, /* Normal SSB */
{RIG_MODE_SSB, Hz(1800)}, /* Narrow SSB */
{RIG_MODE_SSB, Hz(3000)}, /* Wide SSB */
{RIG_MODE_AM, Hz(9000)}, /* Normal AM */
{RIG_MODE_AM, Hz(6000)}, /* Narrow AM */
{FTDX5000_FM_RX_MODES, Hz(15000)}, /* Normal FM */
{FTDX5000_FM_RX_MODES, Hz(8000)}, /* Narrow FM */
RIG_FLT_END,
},
.priv = NULL,
.ext_tokens = ftdx5000_ext_tokens,
.extlevels = ftdx5000_ext_levels,
.priv = &ftdx5000_priv_caps,
.rig_init = newcat_init,
.rig_cleanup = newcat_cleanup,
@ -379,5 +243,7 @@ const struct rig_caps ftdx3000_caps =
.get_trn = newcat_get_trn,
.set_channel = newcat_set_channel,
.get_channel = newcat_get_channel,
.set_ext_level = newcat_set_ext_level,
.get_ext_level = newcat_get_ext_level,
};

7
rigs/yaesu/ft891.c
Wyświetl plik

@ -38,18 +38,13 @@
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft891.h"
#include "idx_builtin.h"
/*
* ft891 rigs capabilities.
* Also this struct is READONLY!
*
* FT-891 rig capabilities
*/
const struct rig_caps ft891_caps =
{
RIG_MODEL(RIG_MODEL_FT891),

9
rigs/yaesu/ft991.c
Wyświetl plik

@ -37,20 +37,13 @@
#include <stdlib.h>
#include <string.h>
#include "hamlib/rig.h"
#include "bandplan.h"
#include "serial.h"
#include "misc.h"
#include "yaesu.h"
#include "newcat.h"
#include "ft991.h"
#include "idx_builtin.h"
/*
* ft991 rigs capabilities.
* Also this struct is READONLY!
*
* FT-991 rig capabilities
*/
const struct rig_caps ft991_caps =
{
RIG_MODEL(RIG_MODEL_FT991),

17
rigs/yaesu/ftdx101.c
Wyświetl plik

@ -41,15 +41,16 @@ cal_table_float_t yaesu_ftdx101d_swr_cal = FTDX101D_SWR_CAL;
const struct newcat_priv_caps ftdx101d_priv_caps =
{
.roofing_filter_count = 5,
.roofing_filter_count = 6,
.roofing_filters =
{
// The index must match ext level combo index
{ .index = 0, .set_value = '1', .get_value = '6', .width = 12000, .optional = 0 },
{ .index = 1, .set_value = '2', .get_value = '7', .width = 3000, .optional = 0 },
{ .index = 2, .set_value = '3', .get_value = '8', .width = 1200, .optional = 1 },
{ .index = 3, .set_value = '4', .get_value = '9', .width = 600, .optional = 0 },
{ .index = 4, .set_value = '5', .get_value = 'A', .width = 300, .optional = 1 },
{ .index = 0, .set_value = '0', .get_value = 0, .width = 12000, .optional = 0 },
{ .index = 1, .set_value = '1', .get_value = '6', .width = 12000, .optional = 0 },
{ .index = 2, .set_value = '2', .get_value = '7', .width = 3000, .optional = 0 },
{ .index = 3, .set_value = '3', .get_value = '8', .width = 1200, .optional = 1 },
{ .index = 4, .set_value = '4', .get_value = '9', .width = 600, .optional = 0 },
{ .index = 5, .set_value = '5', .get_value = 'A', .width = 300, .optional = 1 },
}
};
@ -62,7 +63,7 @@ const struct confparams ftdx101d_ext_levels[] =
"Roofing filter",
NULL,
RIG_CONF_COMBO,
{ .c = { .combostr = { "12 kHz", "3 kHz", "1.2 kHz (optional)", "600 Hz", "300 Hz (optional)", NULL } } }
{ .c = { .combostr = { "AUTO", "12 kHz", "3 kHz", "1.2 kHz (optional)", "600 Hz", "300 Hz (optional)", NULL } } }
},
{ RIG_CONF_END, NULL, }
};
@ -75,7 +76,7 @@ int ftdx101d_ext_tokens[] =
const struct rig_caps ftdx101d_caps =
{
RIG_MODEL(RIG_MODEL_FTDX101D),
.model_name = "FT-DX101D",
.model_name = "FTDX101D",
.mfg_name = "Yaesu",
.version = NEWCAT_VER ".5",
.copyright = "LGPL",

2
rigs/yaesu/yaesu.c
Wyświetl plik

@ -107,7 +107,7 @@ DECLARE_INITRIG_BACKEND(yaesu)
rig_register(&frg9600_caps);
rig_register(&vr5000_caps);
rig_register(&vx1700_caps);
rig_register(&ft1200_caps);
rig_register(&ftdx1200_caps);
rig_register(&ft991_caps);
rig_register(&ft891_caps);
rig_register(&ft847uni_caps);

2
rigs/yaesu/yaesu.h
Wyświetl plik

@ -78,7 +78,7 @@ extern const struct rig_caps frg8800_caps;
extern const struct rig_caps frg9600_caps;
extern const struct rig_caps vr5000_caps;
extern const struct rig_caps vx1700_caps;
extern const struct rig_caps ft1200_caps;
extern const struct rig_caps ftdx1200_caps;
extern const struct rig_caps ft847uni_caps;
extern const struct rig_caps ftdx101d_caps;
extern const struct rig_caps ft818_caps;