mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
9 594 Commity
54 Gałęzie
29 Tagi
44 MiB
Wykres commitów

9594 Commity (22df154486fa59489d9bc51ff220ab70e2961c66)

Autor SHA1 Wiadomość Data
Mike Black W9MDB 22df154486 Remove EX039 check from FTDX3000/3000DM 
https://github.com/Hamlib/Hamlib/issues/1206
 2023-01-06 22:22:25 -06:00
Mike Black W9MDB 79255fa27c Remove unnecessary check from netrigctl.c 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-06 16:41:45 -06:00
Mike Black W9MDB 4a487ffdcc Fix rigctld agc level readings -- allow for rig backedn to specify "RIG_AGC_NONE" now for clarity if desired 
https://github.com/Hamlib/Hamlib/issues/1155
 2023-01-06 16:21:58 -06:00
Mike Black W9MDB db218e9e73 Update man pages to clarify upper/lower case for set/get commands 2023-01-06 10:30:32 -06:00
Mike Black W9MDB 86771a9557 Update simelecraft.c 2023-01-06 07:56:11 -06:00
Mike Black W9MDB e6c5c15452 Update NEWS 2023-01-05 23:32:41 -06:00
Mike Black W9MDB bbd0f856ca Fix rig_getpower2mW so it checks all range lists 
https://github.com/Hamlib/Hamlib/issues/1205
 2023-01-05 23:31:15 -06:00
Mike Black W9MDB 31d2939acc Fix auto_power_on check in rigctld.c 2023-01-05 10:02:46 -06:00
Mike Black W9MDB 589736e8f7 Add simid5100.c 2023-01-04 17:33:55 -06:00
Mike Black W9MDB 6dbd2cff5e Update NEWS 2023-01-04 17:23:49 -06:00
Mike Black W9MDB 902be172c1 Allow rigctld to start with autopower_on=0 and avoid timeouts at startup 2023-01-04 17:22:56 -06:00
Mike Black W9MDB f1b6d322ba Update NEWS 2023-01-04 15:46:17 -06:00
Mike Black W9MDB 87cc9a8c3d Update ID5100 and ID4100 
Promote ID5100 to stable
https://github.com/Hamlib/Hamlib/issues/1204
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1202
 2023-01-04 15:40:36 -06:00
Mike Black W9MDB 383c95b9c4 Get dummy rig to work with grig by disallowing empty "u" calls 2023-01-04 15:39:23 -06:00
Mike Black W9MDB af9a7a6938 Make 3-byte Icom ID rigs show error message 2023-01-04 10:48:30 -06:00
Mike Black W9MDB cceffce4a5 Remove XONXOFF flow control from ID5100 and ID4100 -- Firmware E8 is not working correclty that flow control 
https://github.com/Hamlib/Hamlib/issues/1202
 2023-01-04 10:45:06 -06:00
Mike Black W9MDB 0404b43bd8 Add PKTUSB to ft1000mp rigs 2023-01-04 07:24:05 -06:00
Mike Black W9MDB 138795668f Fix ID5100 get/set_mode 
Remove ID rigs freq_len check as civ_731 setting should cover it
https://github.com/Hamlib/Hamlib/issues/1204
 2023-01-04 06:57:12 -06:00
Mike Black W9MDB 9c5809ffba Fix units for get freq for ID5100 ID4100 ID31 ID51 
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-03 17:54:04 -06:00
Mike Black W9MDB 1b6b78f54a Another attempt to fix get/set freq for ID5100 ID4100 ID31 ID51 
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-03 12:17:16 -06:00
Mike Black W9MDB 4c09344f32 Convert Icom 3-byte frequency to Hz from KHz 
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-02 23:04:54 -06:00
Mike Black W9MDB 9f0bd7b310 Add rigctltcp.c -- not working yet 2023-01-02 11:38:27 -06:00
Mike Black W9MDB 0b2f0873b0 Update NEWS 2023-01-02 11:32:18 -06:00
Mike Black W9MDB c7b33ef0b3 Fix ID5100 ID4100 ID31 ID51 get/set freq 
Remove get_powerstat from ID4100 ID31 ID51 as it they are not capable
Add new rig_is_model function to help with Icom rig identification checks
https://github.com/Hamlib/Hamlib/issues/1202
https://github.com/Hamlib/Hamlib/issues/1200
 2023-01-02 11:30:52 -06:00
Mike Black W9MDB f68d45d99b Update NEWS 2023-01-02 08:58:21 -06:00
Mike Black W9MDB fa7289995c Remove get_powerstat from Icom ID-5100 -- does not have the ability to get power status 
https://github.com/Hamlib/Hamlib/issues/1201
 2023-01-02 08:48:59 -06:00
Mike Black W9MDB 582686505c TS-890S query rig to find out which meter type the operator has selected 
Thanks to N3GB George Baltz
 2023-01-01 16:40:19 -06:00
Mike Black W9MDB 712564a2ae Revert "TS-890S query rig to find out which meter type the operator has selected" 
Committed a bit too much
This reverts commit 2fc1d157ba.
 2023-01-01 16:39:25 -06:00
Mike Black W9MDB 2fc1d157ba TS-890S query rig to find out which meter type the operator has selected 
Thanks to N3GB George Baltz
 2023-01-01 16:33:46 -06:00
Mike Black W9MDB b1fcdea72d Update NEWS 2022-12-31 14:45:46 -06:00
Mike Black W9MDB 1ee37d0a56 Update NEWS 2022-12-31 09:34:29 -06:00
Mike Black W9MDB c1662ce886 Remove set_rts and set_dtr low from serial.c 
This was causing hardward flow control to fail on Linux and MacOS
https://github.com/Hamlib/Hamlib/issues/1198
https://github.com/Hamlib/Hamlib/issues/1199
 2022-12-31 09:30:25 -06:00
Mike Black W9MDB 1bb1f545eb Update NEWS 2022-12-31 08:10:06 -06:00
Mike Black W9MDB 64c566cd14 Add QRPLabs QCX/QDX for better behavior/capability from ts480 entry 2022-12-30 16:04:39 -06:00
Mike Black W9MDB b6654c78cb Update NEWS 2022-12-30 09:37:50 -06:00
Mike Black W9MDB f67a53c41c Allow for 36 and 37 byte IF lengths for ic10.c 
This should fix QRP QRDX buggy IF message -- hopefully the fix theirs to send 33 bytes.
https://github.com/Hamlib/Hamlib/issues/1196#issuecomment-1367473810
 2022-12-29 11:36:50 -06:00
Mike Black W9MDB 04ccccb02d astyle newcat.c 2022-12-28 16:36:59 -06:00
Mike Black W9MDB 7e81e8552a FTDX5000 will now remember startup front/rear setting and restore it 
Will also allow front/rear selection in WSJT-X/JTDX
https://github.com/Hamlib/Hamlib/issues/1195
 2022-12-28 16:34:32 -06:00
Mike Black W9MDB 1fd44dcef2 Make FT5000 EX1031;TX1; command two commands 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 14:27:05 -06:00
Mike Black W9MDB 2306ee4f1d Make sure FT5000 is in data mode for PTT request -- returns to MIC mode on shutdown 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 14:11:25 -06:00
Mike Black W9MDB 606aea1552 FT5000 cannot use RIG_PTT_ON_DATA/MIC menu 103 control and is now set for rear automatically too 
https://github.com/Hamlib/Hamlib/issues/1193
 2022-12-28 12:41:39 -06:00
Mike Black W9MDB cfc2e28c19 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-12-26 10:22:16 -06:00
Mike Black W9MDB a75b274f6f Change FTDX5000 write_delay to zero -- was causing microham to return ?; to every command 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-12-26 10:21:35 -06:00
Mike Black W9MDB ab511cbea6 https://github.com/Hamlib/Hamlib/issues/1080 2022-12-26 09:44:53 -06:00
Mike Black W9MDB 0450b36c67 Fix apex build and warning message 
https://github.com/Hamlib/Hamlib/issues/1159
 2022-12-25 22:26:52 -06:00
Mike Black W9MDB bc6c14e430 Add Apex Shared Loop rotator 
https://github.com/Hamlib/Hamlib/issues/1159
 2022-12-25 17:07:26 -06:00
Mike Black W9MDB c59b5383e9 Remove echo from Makefile.am 2022-12-24 22:20:28 -06:00
Mike Black W9MDB 97ef9e5bea Add RIG_LEVEL_AGC_TIME to more Icom rigs 
https://github.com/Hamlib/Hamlib/issues/1136
 2022-12-24 14:37:32 -06:00
Mike Black W9MDB 5db44be3ba Update NEWS 2022-12-24 14:03:18 -06:00
Mike Black W9MDB e70465a9c0 Fix grep error on mingw build 2022-12-24 11:31:12 -06:00