mirror
/
Hamlib
kopia lustrzana https://github.com/Hamlib/Hamlib
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
9 880 Commity
57 Gałęzie
31 Tagi
46 MiB
Wykres commitów

2535 Commity (1b3cee99fbf1d1357f8c69b9f33404bfdb5d7363)

Autor SHA1 Wiadomość Data
PianetaRadio 033cc8a192
NB2 
version update
 2022-12-01 10:24:55 +01:00
PianetaRadio 72701a9032
NB2 2022-12-01 10:22:15 +01:00
PianetaRadio 479d7a080a
NB2 
version update
 2022-12-01 10:21:31 +01:00
PianetaRadio bb7d3cbad4
NB2 
version update
 2022-12-01 10:13:54 +01:00
PianetaRadio 20233b92c0
NB2 
version update
 2022-12-01 10:13:11 +01:00
PianetaRadio b90afcb438
NB2 2022-12-01 10:04:01 +01:00
PianetaRadio 9c3405465c
Update newcat version 
NB2 introduction
 2022-12-01 10:02:18 +01:00
Mike Black W9MDB a116cbe502 Astyle newcat.c 2022-11-30 10:45:17 -06:00
PianetaRadio c6b11728c9
Added RIG_FUNC_NB2 
From FT-950 CAT manual, there are two NB options:

NB P1 P2 ;
P1 0: Fixed
P2 0: Noise Blanker “OFF”
1: Noise Blanker “ON”
2: Noise Blanker (Wide) “ON”
 2022-11-30 16:40:50 +01:00
PianetaRadio ea11358379
Added RIG_FUNC_NB2 get/send func 2022-11-30 16:36:53 +01:00
Mike Black W9MDB e2570d9d49 Fix misc TS890S items -- thanks to George Baltz N3GB 2022-11-28 16:45:08 -06:00
Mike Black W9MDB 09fb081847 Fix k3.c math.h 2022-11-28 16:44:58 -06:00
Mike Black W9MDB c5a83b1652 Fix compiler warnings 2022-11-28 11:39:03 -06:00
Mike Black W9MDB b4a6f98524 Fix range list in mds.c 2022-11-28 11:35:58 -06:00
Mike Black W9MDB 3e6ca76c31 Fix frequency check in k3.c 2022-11-28 11:32:30 -06:00
Mike Black W9MDB 39a78a4af7 Fix duplicate targetable_vfo in xiegu.c 2022-11-28 11:31:04 -06:00
Mike Black W9MDB 4d7db63b97 Fix rx_range_list2 problem in dx77.x 2022-11-28 11:29:24 -06:00
Mike Black W9MDB 72e86bf18b Fix logic in dummy.c 2022-11-28 11:27:40 -06:00
Mike Black W9MDB f81c20eb37 Astyle files 2022-11-28 10:48:17 -06:00
Mike Black W9MDB 16826c5a88 Fix compilation warning on fifisdr.c 2022-11-28 08:50:22 -06:00
Mike Black W9MDB 427ca8d90f For FT736 add TARGETABLE_MODE and fix set_mode to work with VFOB 
https://github.com/Hamlib/Hamlib/issues/1160
 2022-11-27 22:22:40 -06:00
Mike Black W9MDB 3ce5718a65 For FT736 fix set_vfo to also work for VFOB and set split when VFOB is requested 
https://github.com/Hamlib/Hamlib/issues/1160
 2022-11-27 22:19:20 -06:00
Mike Black W9MDB 5d7f695727 Add AGC levels to Kenwood rigs that we can verify have them 
https://github.com/Hamlib/Hamlib/milestone/16
 2022-11-24 10:51:34 -06:00
Mike Black W9MDB f8a5b92bc7 Add AGC levels to ts2000.c and fix AGC Level printout to show index number instead of enumeration number. 
Add RIG_AGC_LONG and RIG_AGC_ON levels to match rig's capabilities better
Still need to allow setting AGC level using mnemonics instead of level value to make it more usable
 2022-11-24 09:47:12 -06:00
Mike Black W9MDB ca4814c472 astyle files 2022-11-23 23:31:08 -06:00
Mike Black W9MDB 1ef3549e94 Fix rigctld showing the real rig agc_levels instead of all levels 
Fix display of RIG_AGC_OFF
Add RIG_AGC_LONG
Fix PowerSDR AGC values
https://github.com/Hamlib/Hamlib/issues/1155
 2022-11-23 23:29:18 -06:00
Mike Black W9MDB 508eef31f9 Add set_mode_with_data and get_mode_with_data to Xiegu G90 2022-11-21 11:21:58 -06:00
Mike Black W9MDB e3a1d8c96c Update icom.h data 
https://github.com/Hamlib/Hamlib/issues/1154
 2022-11-20 11:42:45 -06:00
Mike Black W9MDB 7068378a91 Add data mode and targetable freq/mode to Xiegu X6100 
https://github.com/Hamlib/Hamlib/issues/1154
 2022-11-20 11:41:15 -06:00
Mike Black W9MDB 09f83cbfb7 Change MDS 4710/9710 to Alpha status -- no testing has been done yet 2022-11-19 10:47:12 -06:00
Mike Black W9MDB 0bacb35f06 Make kenwood a bit more robust to discern between no reply and corrupted/unexpected reply 
This logic should be usable to use AI mode eventually or share serial splitter line
 2022-11-18 15:53:34 -06:00
Mike Black W9MDB 3c273c001a Fix Xiegu X6100 rig split 
https://github.com/Hamlib/Hamlib/issues/1152
 2022-11-17 14:20:49 -06:00
Mike Black W9MDB 8cffaf3875 Change minimum timeout on all Kenwood rigs to 500ms -- legacy timeouts were a touch too short for all situations 2022-11-17 11:05:49 -06:00
Mike Black W9MDB 1a4745a7c2 Split MDS 4710/9710 2022-11-16 16:50:33 -06:00
Mike Black W9MDB 6c5e0e6974 Update astyle formatting 2022-11-16 15:30:36 -06:00
Mike Black W9MDB a20c21aab0 Fix duplicate MODES in g313-win.c 2022-11-15 17:55:58 -06:00
Mike Black W9MDB 6b41f0738f Clean up rest of dumpcap backend warnings 2022-11-15 17:54:02 -06:00
Mike Black W9MDB 99627855a2 Add mds.h to mds/Makefile.am 2022-11-15 08:09:45 -06:00
Mike Black W9MDB 1e68b06b53 Add MDS 4710 rig 2022-11-14 23:57:22 -06:00
Mike Black W9MDB 1aebee2da9 Fix clang warning on callback functions 
https://github.com/Hamlib/Hamlib/issues/1149
 2022-11-14 16:37:20 -06:00
Mike Black W9MDB 5fa3d59810 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-11-14 16:14:52 -06:00
Mike Black W9MDB 4f5bf9aadd Fix some dumpcaps warnings in many rigs 2022-11-14 16:02:28 -06:00
PianetaRadio a563c749f4
Update newcat.c 
Fix FT991 NR level
 2022-11-14 16:26:53 +01:00
PianetaRadio 20ce600448
Update ft991.c 
Correct NR level
 2022-11-14 16:14:28 +01:00
PianetaRadio ae0f7f4237
Merge branch 'Hamlib:master' into master 2022-11-14 16:09:21 +01:00
Mike Black W9MDB d8caad3d1b Update level_gran_yaesu.h 2022-11-14 08:19:07 -06:00
PianetaRadio 7bcf599afc
Update ft991.c 
NR level range
 2022-11-14 10:43:07 +01:00
PianetaRadio 4bede074fc
Update newcat.c 
Fix NR level for FT-991, according to manual range is 1...15
 2022-11-14 10:42:07 +01:00
PianetaRadio 8533002f8e
Update ft991.c 
LVL_NR
 2022-11-14 10:33:40 +01:00
Mike Black W9MDB 5a5fc68922 Add missing level_gran_kenwood.h 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-13 08:05:52 -06:00
Mike Black W9MDB 8616be635e Fix level_gran on kenwood rigs 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-13 06:53:55 -06:00
Mike Black W9MDB cc3d912a76 Fix readonly set_level in flex6xxx.c 2022-11-11 23:26:20 -06:00
Mike Black W9MDB c168a99c83 Fix all Icom level_gran values 2022-11-11 23:14:14 -06:00
Mike Black W9MDB 60a6170545 Update Makefile.am for Yaesu to include level_gran_yaesu.h 2022-11-11 17:09:26 -06:00
Mike Black W9MDB c844b02ed1 Fix dumpcap level_gran for Yaesu rigs 2022-11-11 16:56:42 -06:00
Mike Black W9MDB d7ab039573 Fix backwards compatibility of rotctl with rotctld 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 22:28:28 -06:00
Mike Black W9MDB 42f65cc5fb Move rotctl south_zero to new dump protocol section for backwards compatibility 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 21:58:32 -06:00
Mike Black W9MDB 782e54e4f2 Fix new protocol in rotctl functions to duplicate logic in rigctl new protocol 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 21:54:00 -06:00
Mike Black W9MDB 853806b978 Fix rotctld dumpcaps to expose client rot_type instead of Other 
https://github.com/Hamlib/Hamlib/issues/1035
 2022-11-10 17:53:21 -06:00
Mike Black W9MDB eeac97c725 Fix FT-991 level_gran 
https://github.com/Hamlib/Hamlib/issues/1144
 2022-11-10 16:00:00 -06:00
Mike Black W9MDB 539457f6ce Update ftdx10.h power levels 2022-11-10 12:18:18 -06:00
Mike Black W9MDB 27f424dfe2 Add RIG_FUNC_TUNER to flrig.c 2022-11-10 12:17:17 -06:00
Mike Black W9MDB 36717917ce Fix 5W level of ftdx10.c based on user testing 2022-11-09 15:27:20 -06:00
Mike Black W9MDB 2993ca9e62 Fix segfault in icom_get_powerstat 2022-11-08 15:09:09 -06:00
Mike Black W9MDB fde9ad706c Fix IC-7300 rig power on hopefully 
https://github.com/Hamlib/Hamlib/issues/1142
 2022-11-08 10:47:57 -06:00
Mike Black W9MDB 0963d8c5bf Fix if_len in flex6xxx.c 
https://github.com/Hamlib/Hamlib/issues/1141
 2022-11-07 12:24:55 -06:00
Mike Black W9MDB 454f640237 Fix dummy_set_split_freq 2022-11-06 15:58:30 -06:00
Mike Black W9MDB 1074410bd5 Add RIG_LEVEL_KEYSPD to ts890s.c 
https://github.com/Hamlib/Hamlib/issues/1139
 2022-11-05 12:58:40 -05:00
Mike Black W9MDB c218996e2f Add RIG_FUNC_OVF_STATUS for IC-7300, IC-9700, IC-705, IC-R8600 2022-11-04 23:31:51 -05:00
Mike Black W9MDB 8789321465 Add ID 800 for FT710 2022-11-04 22:41:02 -05:00
Mike Black W9MDB bf22bc4b02 Fix flrig get_ptt 
https://github.com/Hamlib/Hamlib/issues/1138
 2022-11-04 13:26:52 -05:00
Mike Black W9MDB d311153f63 Add AGC_TIME to IC-7300, IC-9700, and IC-705 
https://github.com/Hamlib/Hamlib/issues/1136
 2022-11-04 10:49:14 -05:00
PianetaRadio aedf39adc2
Update netrotctl.c 
Add south_zero from dump_state in open function
 2022-11-04 11:32:39 +01:00
Mike Black W9MDB eff048d729 Add AGC_OFF to IC7300 agc levels 2022-11-01 14:57:37 -05:00
Mike Black W9MDB b2cf596b54 IC7300 cannot get powerstat so use get_freq instead. There are likely more Icom rigs like this 2022-11-01 14:51:47 -05:00
Mike Black W9MDB 0d73bb22a0 Fix LEVEL_USB_AF 
https://github.com/Hamlib/Hamlib/issues/1135
 2022-11-01 12:25:42 -05:00
Mike Black W9MDB 2a30396d70 Add RIG_LEVEL_USB_AF for IC-705, IC-7300, IC-9700, IC-785x, and IC-R8600 
In combination with RIG_LEVEL_RF we should be able to create an AGC control
for WSJTX and JTDX for example to keep audio levels within a good A/D range automagically
https://github.com/Hamlib/Hamlib/issues/1135
 2022-11-01 09:14:19 -05:00
Mike Black W9MDB b2bd93a7be Small update to newcat.c notes 2022-11-01 08:06:48 -05:00
Mike Black W9MDB 1cb999af01 Fix space in string compare in flrig.c 
https://github.com/Hamlib/Hamlib/issues/1134
 2022-10-30 22:25:28 -05:00
Mike Black W9MDB 9c02b2ebc2 Fix Yaesu DT command and add 2 or 4 digit timezone option 
https://github.com/Hamlib/Hamlib/issues/1132
 2022-10-25 23:26:16 -05:00
Mike Black W9MDB e3ce4a35a4 Add RIG_SCAN_STOP to newcat_scan 2022-10-21 22:54:20 -05:00
Mike Black W9MDB d3d21983f0 Fix newcat_scan 2022-10-21 22:41:29 -05:00
Mike Black W9MDB bbeb87eb05 Add newcat_scan for Yaesu rigs 2022-10-21 22:27:58 -05:00
Mike Black W9MDB b674317791 Fix kenwood PS command length 2022-10-21 13:26:13 -05:00
Mike Black W9MDB e9325c9c7b Fix case on TS-990S 2022-10-16 08:15:33 -05:00
Mike Black W9MDB 411925a372 FT710 does have targetable mode 2022-10-14 15:44:24 -05:00
Mike Black W9MDB b46b930770 Update FT710 parameters based on testing 
FT8 mode defaults to 1 stop bit and no hardware flow control
 2022-10-14 15:33:26 -05:00
Mike Black W9MDB e6cd452c9d Fix detection if FT-710 
Update simyaesu.c
 2022-10-14 09:02:40 -05:00
Mike Black W9MDB 04bc5cc089 Add FT710 to newcat.c checks 2022-10-13 17:41:27 -05:00
Mike Black W9MDB 791a5e3f57 Update max baud rate for ft710.c 2022-10-12 23:12:48 -05:00
Mike Black W9MDB 436365f6a4 Add ft710.c 2022-10-12 22:57:51 -05:00
Mike Black W9MDB ec4aea81b2 Add FT-710 as a clone of FTDX10 2022-10-12 22:51:21 -05:00
Mike Black W9MDB dde5d752fc Update kenwood.h date 2022-10-12 22:39:04 -05:00
Mike Black W9MDB b3d0a5a350 Add if_len to flex6xxx.c 2022-10-12 22:38:21 -05:00
Mike Black W9MDB 8adfd5e351 Update some debug and fix length of PS command in kenwood.c 2022-10-10 22:15:06 -05:00
Mike Black W9MDB 6bd5ab89b6 Remove incorrect debug line in icom.c 2022-09-22 15:39:42 -05:00
Mike Black W9MDB 67b933ddb5 Update astyle for 4.5 release 2022-09-20 08:46:28 -05:00
Mike Black W9MDB 9b98ea11eb Make debug rx_vfo info match code better in kenwood.c 
https://github.com/Hamlib/Hamlib/issues/1116
 2022-09-17 10:24:13 -05:00
Mike Black W9MDB 7db23d549f Add another priv->has_ps check to kenwood.c 2022-09-13 22:15:22 -05:00
Mike Black W9MDB 8c4c906efe Add a few more rigs to have_ps=0 2022-09-13 16:22:03 -05:00
Mike Black W9MDB e7262e23c8 Make TS450S turn off has_ps 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 11:45:58 -05:00
Mike Black W9MDB f58ca95c9c TS-450S/690S does not have PS cmd so we will disable have_ps when 1st call to PS times out for Kenwood rigs 
https://github.com/Hamlib/Hamlib/issues/1114
 2022-09-13 09:26:04 -05:00
Mike Black W9MDB 098d1d8dbb Fix uninitialized value in flrig.c found by valgrind 2022-09-10 13:00:34 -05:00
Mike Black W9MDB 224ccc7839 Fix filter set for IC375 and promote to stable 
https://github.com/Hamlib/Hamlib/issues/1113
 2022-09-09 14:01:43 -05:00
Mike Black W9MDB 9cb511af00 Add some debug for Icom use_cached variables 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-09-05 12:21:45 -05:00
Mike Black W9MDB 4007581363 Add async capability to IC-706 series while we're debugging issue 1108 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-09-05 09:54:17 -05:00
Mike Black W9MDB 5701e73e1e Fix valgrind warning 
https://github.com/Hamlib/Hamlib/issues/1108
 2022-08-31 08:57:00 -05:00
Mike Black W9MDB 7e51932a9e Remove some debug from icom.c 2022-08-29 10:11:40 -05:00
Mike Black W9MDB 1aed27c71a Remove #defines for rig_set_split and return to standard call 2022-08-27 07:36:14 -05:00
Michael Black efd166fb50
Merge pull request #1106 from mikaelnousiainen/fix-yaesu-power-off-handling 
Fix handling of EPOWER error code and reduce unnecessary commands in Yaesu newcat backend
 2022-08-23 12:11:51 -05:00
Mikael Nousiainen dc02c566f5 Fix handling of the new EPOWER error code: do not re-open rig and fix/extend allowed commands when rig is powered off. Fix Yaesu newcat backend to not try to call rig ID command during command validation. 2022-08-23 00:10:25 +03:00
Mike Black W9MDB ef06b358d7 Add verification of EX commands in newcat.c 2022-08-22 15:55:35 -05:00
Mike Black W9MDB 2275bf51f8 When Yaeus rigs are split and tx is on VFOA then turning split off will remain on VFOB tx/rx 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 12:20:01 -05:00
Mike Black W9MDB 95126fd350 Add EX echo as separte get_cmd call for CAT TOT TIMEOUT 
Could do this for other EX commands too
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 12:00:38 -05:00
Mike Black W9MDB f8f0678988 Take out EX echo request -- can't do that as EX command does not expect response 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:57:53 -05:00
Mike Black W9MDB 4664620b92 Add FTDX300DM to same exceptions as FTDX3000 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:51:34 -05:00
Mike Black W9MDB 3f99ec47db Have FTDX5000 and DX3000 echo CAT TOT TIMEOUT when set 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:47:13 -05:00
Mike Black W9MDB e86e05bce3 Change FTDX3000 CAT TOT TIMEOUT to 100ms 
Change Yaesu split detection to detect reverse split
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 11:40:52 -05:00
Mike Black W9MDB e8fa723bc8 Change FTDX3000 write_delay back to zero -- at value of 1 rigctl was showing all ? responses from rig at 38400 baud 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-21 10:29:22 -05:00
Mike Black W9MDB c34f719337 Astyle files 2022-08-20 22:56:04 -05:00
Mike Black W9MDB b4150fce19 FT747GX add TARGETABLE_FREQ and update rx_range_list and tx_range_list for new range_list implmentation 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 15:39:21 -05:00
Mike Black W9MDB d0dcfbff84 FT747GX remove debug code -- duh... 2022-08-19 11:57:08 -05:00
Mike Black W9MDB abc2d5a846 FT747GX show cached freqs when get_freq is called 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 09:33:10 -05:00
Mike Black W9MDB b97b8b0fe7 For FT747GX do not get info when PTT is on -- use cached info 2022-08-19 09:30:59 -05:00
Mike Black W9MDB 28b1a9bb95 Increase FT747GX cache timeout to 1500ms as get_freq is taking over 1000ms 2022-08-19 08:33:31 -05:00
Mike Black W9MDB 179ee66f0d Add 600ms wait when newcat.c see rig busy 
https://github.com/Hamlib/Hamlib/issues/1100
 2022-08-19 08:21:29 -05:00
Mike Black W9MDB 6965927fb4 Add IC275 to icom rigs that can't do 0x25 2022-08-19 07:55:20 -05:00
Mike Black W9MDB ed5a26ac4e Try to get FT747GX to return freq while transmitting 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-19 06:58:03 -05:00
Mike Black W9MDB deb5ea6d6f For FT747GX return cached freq when in TX 2022-08-18 17:33:41 -05:00
Mike Black W9MDB 4442f67e7a Finally got the FT747GX set_freq working correctly 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-18 17:03:17 -05:00
Mike Black W9MDB 88f5022079 Still trying to fix FT747GX set_freq 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-18 15:59:56 -05:00
Mike Black W9MDB 23fcad6d86 Hopefully fix FT747GX get_freq 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-18 09:21:17 -05:00
Mike Black W9MDB 34e651cf62 Attempt to fix ft747gx set_freq 
https://github.com/Hamlib/Hamlib/issues/1101
 2022-08-17 17:40:09 -05:00
Mike Black W9MDB 36e88e705b Increase write_delay in FT5000 to 1ms -- suspect it has similar problem to FT3000 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-08-17 13:08:23 -05:00
Mike Black W9MDB fa162231e7 Increase FTDX3000 write delay to 1ms -- when using Fake It in WSJTX was not recognizing VS0; command 2022-08-17 12:45:19 -05:00
Mike Black W9MDB 824a6d11fc Turn off 60M split for Yaesu rigs (e.g. FTDX-10) that have to use memory mode for 60M band 2022-08-16 09:29:07 -05:00
Mike Black W9MDB 810da5f54c Fix EK89X set_freq and upgrade to BETA status 
Add ISBUSB and ISBLSB modes
 2022-08-13 08:52:42 -05:00
Mike Black W9MDB eea51fe7c7 Change EK89X to odd parity 2022-08-08 16:05:14 -05:00
Mike Black W9MDB 3c4a9f1627 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-08-04 08:24:19 -05:00
Mike Black W9MDB 32f9353c03 Increase write_delay for Xiegu 6100 to 3ms -- was locking up rig < 3ms 2022-08-04 08:23:26 -05:00
Michael Black 1830d768d6
Merge pull request #1097 from ncw/fix-qcx-mini 
Fix sending morse with QRPLabs QCX rigs
 2022-08-03 15:43:34 -05:00
Mike Black W9MDB f32af7496d Remove powerstat commands from Xiegu rigs 2022-08-03 12:36:35 -05:00
Nick Craig-Wood M5NCW a81c295b3c Fix sending morse with QRPLabs QCX rigs 
The QCX series emulates the Kenwood TS480. However for the sending
morse command it seems to be more in line with the Elecraft K series
rigs.

Before this change, the QCX mini would reply to the KY command with
KY2 which was not understood. The QCX mini defines the KY responses to
be:

- KY0; if message sending is in progress and the transmit text buffer is not more than 75% full
- KY1; if message sending is in progress and the transmit text buffer is more than 75% full
- KY2; if no message is being sent, therefore the transmit text buffer is emtpy

This seems to be an extension of the original Kenwood protocol but it
is exactly as implemented by Elecraft in their K series rigs.

This patch treats the KY2 response the same as the KY0 response
meaning - OK to transmit.
 2022-08-03 18:31:03 +01:00
Mike Black W9MDB 8c172af224 Remove split function from Xiegu G90 -- does not support them 2022-08-03 12:06:19 -05:00
Mike Black W9MDB e8c36b2b4b Add some more rigs to icom.c that do not use 0x25/0x26 commands 2022-08-01 17:25:10 -05:00
Mike Black W9MDB 0e85260d0f One more X5105 change 2022-08-01 15:32:11 -05:00
Mike Black W9MDB 5ee3c15c3b Remove set/get_powerstat from Xeigu X5105 2022-08-01 15:26:28 -05:00
Mike Black W9MDB 3762823255 Trying to make x5105 x108g_set-ptt happy 2022-08-01 15:17:15 -05:00
Mike Black W9MDB 65a2101aff Another attempt to fix x108g_set_ptt 2022-08-01 15:02:22 -05:00
Mike Black W9MDB 998715f3f4 Allow 0xfb for x108g_set_ptt 2022-08-01 14:40:00 -05:00
Mike Black W9MDB 0b059cdb93 Fix icom.c debug statement 2022-08-01 13:24:10 -05:00
Mike Black W9MDB e76bbf0e51 Remove split functions from Xiegu X5105 -- it does not do split apparently 2022-08-01 13:22:48 -05:00
Mike Black W9MDB 6bd647f4ed Fix X5105 detection 2022-08-01 13:06:21 -05:00
Mike Black W9MDB 51650e9425 Remove get_dsp_flt for Xeigu X5105 2022-08-01 12:53:34 -05:00
Mike Black W9MDB 1191ddc602 Remove FA/FB validation for FTDX5000 -- was failing but succeeding on 2nd try 2022-07-30 11:55:36 -05:00
Mike Black W9MDB 2b7c2ab5ce Fix all Icom rigs AGC values for correct printout with dumpcaps 
https://github.com/Hamlib/Hamlib/issues/1096
 2022-07-29 23:44:17 -05:00
Mike Black W9MDB 2703aa7dab Fix IC746 AGC values 2022-07-29 23:02:28 -05:00
Mike Black W9MDB 3880128370 Fix FTDX5000 EX0331 command 2022-07-29 17:18:51 -05:00
Mike Black W9MDB 64e226045a Add powerstat calls to xeigu rigs 2022-07-29 10:23:49 -05:00
Mike Black W9MDB 36c777e8bb Add Rohde&Schwartz EK895/896 2022-07-28 23:26:35 -05:00
Mike Black W9MDB be3865693a astyle tmd710.c 2022-07-28 10:34:01 -05:00
Mike Black W9MDB 15f54ccab5 Merge branch 'master' of https://github.com/Hamlib/Hamlib 2022-07-28 10:33:28 -05:00
Mike Black W9MDB 4385b50b1f Add Xiegu X5105 from G90 config 2022-07-28 10:33:07 -05:00
Mikael Nousiainen 1f05801d0f Fix current and split VFO frequency handling for Kenwood TM-D710(G). Use CTRL VFO in the rig for denoting current VFO and PTT VFO for split VFO. 2022-07-28 17:18:04 +03:00
Mike Black W9MDB 57aa5e8399 Revert "Fix FT897 freq set/get for > 100MHz" 
This reverts commit 44ad5c6363.
 2022-07-28 07:10:13 -05:00
Mike Black W9MDB a83eb3bf42 astyle files for 4.5 release 2022-07-27 17:16:17 -05:00
Mike Black W9MDB 44ad5c6363 Fix FT897 freq set/get for > 100MHz 
https://github.com/Hamlib/Hamlib/issues/1065
 2022-07-27 12:45:13 -05:00
Mike Black W9MDB 627ec83652 Change malloc to calloc 2022-07-27 10:26:08 -05:00
Mike Black W9MDB dd3208ad34 Change malloc to calloc 2022-07-27 10:08:29 -05:00
Mike Black W9MDB 027b3ee0a5 Fix valgrind warning uninitialized value in dummy.c for priv->split 2022-07-27 10:03:20 -05:00
Mike Black W9MDB 0c89bcd89f Fix possible uninitialized access in dummy.c 2022-07-27 07:24:19 -05:00
Mike Black W9MDB 21e6e9bf2a Fix X command turning of split mode 
https://github.com/Hamlib/Hamlib/issues/1083
 2022-07-26 10:00:36 -05:00
Mike Black W9MDB d8b33f3b0e Add vfo to ft100_set_vfo debug 2022-07-26 09:51:11 -05:00
Michael Black 74b4d7beb6
Merge pull request #1091 from dforsi/fix/unused-includes 
Fix/unused includes
 2022-07-24 11:44:01 -05:00
Daniele Forsi IU5HKX 7a132e2703 Remove unused includes 
Removes includes of stdio.h stdlib.h string.h unistd.h
 2022-07-24 17:08:57 +02:00
Daniele Forsi IU5HKX 34018600ee Remove unused includes of math.h 2022-07-23 18:39:55 +02:00
Daniele Forsi IU5HKX 4dfe46edbb Remove unused includes related to times and dates 
Removes includes of time.h sys/time.h hamlibdatetime.h
 2022-07-23 18:12:10 +02:00
Mike Black W9MDB 05941406da This broke Icom rigs. 
Revert "Improve debug output on icom_get_vfo to note Icom's inability to get current vfo"

This reverts commit 02b2dad5b0.
 2022-07-22 15:51:22 -05:00
Mike Black W9MDB 02b2dad5b0 Improve debug output on icom_get_vfo to note Icom's inability to get current vfo 2022-07-22 12:57:11 -05:00
Mike Black W9MDB 1c0655a9f5 Reduce a couple of debug statements from ERROR to VERBOSE 2022-07-22 12:43:22 -05:00
Mike Black W9MDB 4677fb16d4 Change FTDX5000 to RIG_PTT_RIG_MICDATA and add logic to newcat. 2022-07-19 23:25:56 -05:00
Mike Black W9MDB 4627e7c4fb Update kenwood rig->state.tx_vfo in kenwood_get_split_vfo_if 
https://github.com/Hamlib/Hamlib/issues/1083
 2022-07-19 13:25:28 -05:00
Mike Black W9MDB 67248edfb8 Allow Omni VII to timeout faster 
https://github.com/Hamlib/Hamlib/issues/1087
 2022-07-18 09:51:00 -05:00
Mike Black W9MDB 946408e0de Promote FDM-DUO to STABLE 2022-07-17 11:25:29 -05:00
Mike Black W9MDB ccea73e631 Add set_powerstat and get_powerstat to PowerSDR 2022-07-15 16:25:36 -05:00
Mike Black W9MDB d0c615ae43 Added EPOWER error return when rig is powered off 
Only set_powerstat will be accepted and rig will be polled for powerstat
https://github.com/Hamlib/Hamlib/issues/1085
 2022-07-15 15:41:23 -05:00
Mike Black W9MDB 30884ae47e Add amp_set_level and amp_set_ext_level 2022-07-14 08:14:41 -05:00
Mike Black W9MDB 71f5766d57 Really fix the k3.c compilation warning 2022-07-14 06:54:56 -05:00
Mike Black W9MDB 1566ceae35 Fix 2nd vfonum warning in tmd710.c 2022-07-13 09:32:04 -05:00
Mike Black W9MDB d0a09d49cc Fix vfonum in tmd710.c 2022-07-13 09:31:01 -05:00
Mike Black W9MDB 94338d46dd Fix compilation warning in k3.c 2022-07-13 09:24:01 -05:00
Mike Black W9MDB 2835c431df Change ft857_set_freq to use ft857_get_ptt instead of rig_get_ptt 
Should be able to get transmit status using ptt=None and Signalink VOX PTT
https://github.com/Hamlib/Hamlib/issues/1084
 2022-07-12 17:52:49 -05:00
Mike Black W9MDB e5ba9c401a Force FTDX5000 to 100ms CAT TIME OUT TIMER 
https://github.com/Hamlib/Hamlib/issues/1080
 2022-07-09 07:40:59 -05:00
Mike Black W9MDB b1369f9458 Fix ic9700 segfault 
https://github.com/Hamlib/Hamlib/issues/1078
 2022-07-07 22:10:49 -05:00
Daniele Forsi IU5HKX 08c06aea14 Fix spelling errors 
Fixed with:
codespell --summary --skip=.git,extra,,lib,macros,security --ignore-words-list="ans,ba,cant,develope,fo,get's,nin,numer,parm,parms,setts,som,statics,ths,ue,vektor,objext" --write-changes --interactive=2
and manual editing.
 2022-07-07 23:56:22 +02:00
Mike Black W9MDB 994d7a2ca6 Fix RTS PTT working with rigctld 
https://github.com/Hamlib/Hamlib/issues/1074
Was fixed by this patch
fc6e432143
 2022-07-06 08:33:14 -05:00
Mike Black W9MDB fc6e432143 Fix kenwood split status 
https://github.com/Hamlib/Hamlib/issues/1072
 2022-07-05 17:03:21 -05:00
Mike Black W9MDB 5e6c1eaef8 Rename TRACE to HAMLIB_TRACE to avoid conflict with MSVC 2022-07-04 07:26:30 -05:00
Mike Black W9MDB 7708e979d9 Add some debug for 60m exception 2022-07-03 08:07:23 -05:00
Mike Black W9MDB fc0e80a0d1 Add 60M exception for FTDX10 to not try and set frequency or mode 2022-07-03 07:58:47 -05:00
Mike Black W9MDB 7dee3aaf5d Fix dangling pointer in aor.c 2022-06-30 17:33:21 -05:00
Mike Black W9MDB 944a52e664 Git rid of compile warning in ft990v12.c 2022-06-30 10:53:30 -05:00
Mike Black W9MDB 04b9353d88 Change fix for IC9700 satmode to be more generic 
https://github.com/Hamlib/Hamlib/issues/1059
 2022-06-30 08:15:49 -05:00
Mike Black W9MDB aa616b3707 For Icom rigs return bandwidth of 12000 for FM mode 
https://github.com/Hamlib/Hamlib/issues/1066
 2022-06-29 15:43:49 -05:00
Mike Black W9MDB cd2b734150 Prevent IC9700 from using 0x25 0x26 commands when in satmode 
https://github.com/Hamlib/Hamlib/issues/1059
 2022-06-29 15:40:41 -05:00
Mike Black W9MDB f4d0e3e402 Add IC375 2022-06-29 15:35:27 -05:00
Mike Black W9MDB 0bcf9a8f98 Update ft990v12 fixing include and naming 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-28 13:30:52 -05:00
Mike Black W9MDB 5711257279 Restore ft990.c and move FT990UNI to it's own file 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-28 09:21:04 -05:00
David Brewerton M0EZP 2f4bca95f7 FT990UNI patch contribution from M0EZP 2022-06-28 07:03:43 -05:00
Mike Black W9MDB 04250b3203 Add TARGETABLE_MODE to tmd710.c 2022-06-26 17:53:19 -05:00
Mike Black W9MDB 05c5724bcf Change TMD710 to TARGETABLE_FREQ 2022-06-24 07:24:36 -05:00
Mikael Nousiainen d3659ef996 Use the correct max RX lengths for min/max reads for Kenwood to avoid timeouts 2022-06-21 21:10:24 +03:00
Mike Black W9MDB e716a010e8 Fix compile warning on tmd710.c 2022-06-20 23:24:28 -05:00
Mike Black W9MDB e7f51edfcb Fix OmniVII set_mode 2022-06-20 18:03:55 -05:00
Mike Black W9MDB 214835339c Fix some more mingw warnings in tmd710.c 2022-06-20 08:09:03 -05:00
Mike Black W9MDB be58dae674 Fix common_dcs_list compile warning on mings for tmd710.c 2022-06-20 08:03:41 -05:00
Mike Black W9MDB 6513b485c9 Add tm71_caps back in 
https://github.com/Hamlib/Hamlib/pull/1071
 2022-06-20 07:58:56 -05:00
Lance Conry 28d304e8fe From a pull request but modified to fit current codebase and clean up warnings 
https://github.com/Hamlib/Hamlib/pull/1071
 2022-06-20 07:47:21 -05:00
Mike Black W9MDB 5c9df8e27d Add FT991UNI to yaesu model list 2022-06-19 16:39:52 -05:00
Mike Black W9MDB 5e9bfed4ce Malachite fix to return good freq for VFOA and zero just for VFOB -- duh 
https://github.com/Hamlib/Hamlib/issues/1070
 2022-06-19 12:27:56 -05:00
Mike Black W9MDB fdbdb388e2 Fix Malachite SDR to return 0 freq when VFOB is requested -- rig does not have VFOB 
https://github.com/Hamlib/Hamlib/issues/1070
 2022-06-19 12:03:32 -05:00
Mike Black W9MDB 521d3f6ac3 OmniVII fix several places where command lengths were incorrect 2022-06-18 12:57:34 -05:00
Mike Black W9MDB 4d3e8ac240 Migrate tentec README 2022-06-17 15:41:29 -05:00
Mike Black W9MDB 8c1bb1d439 Allow OmniVII set_ptt to also set RIPing for ethernet 
https://github.com/Hamlib/Hamlib/issues/1067
 2022-06-17 07:02:11 -05:00
Mike Black W9MDB f3b95e744a Fix OmniVII ptt -- could turn on but not turn it off 
https://github.com/Hamlib/Hamlib/issues/1067
 2022-06-16 22:52:32 -05:00
Mike Black W9MDB 459e4ce735 TS-890S add RIG_FUNC_SEND_MORSE 
https://github.com/Hamlib/Hamlib/issues/1043
 2022-06-16 07:52:45 -05:00
Mike Black W9MDB 17aa82dc12 Fix divide by 10 for TT599 NR 
https://github.com/Hamlib/Hamlib/issues/1061#issuecomment-1155267428
 2022-06-14 09:38:16 -05:00
Mike Black W9MDB e66cf67a96 Fix TT599 and TT565 NR level to set levels 1-9 and read levels 1-10 
Unable to set level 10 apparently for 599 and probably same for 565
https://github.com/Hamlib/Hamlib/issues/1061
 2022-06-14 09:13:07 -05:00
Mike Black W9MDB e859d6a2c9 Add debug to ft990.c 2022-06-13 12:01:15 -05:00
Mike Black W9MDB a9e7bd4433 Another attempt to get FT990UNI working well 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-13 09:51:03 -05:00
Mike Black W9MDB c964ec6bfb For FT990UNI permanently cache the update_data block 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-12 16:49:53 -05:00
Mike Black W9MDB 82fac3e0a6 Missed committing ft990.c 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-12 09:30:12 -05:00
Mike Black W9MDB 5b5b83b3f3 Try to get best behavior on FT900UNI during startup -- read 1492 bytes just once 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-12 09:10:42 -05:00
Mike Black W9MDB 5f26083fac Add ENTER/RETURNFUNC to netrigctl_open to identify lines when EPROTO errors occur 2022-06-12 07:46:35 -05:00
Mike Black W9MDB bba6a0b88b FT990UNI make it read the entire 1492 response when asking for UPDATE_VFO_DATA 
https://github.com/Hamlib/Hamlib/milestone/14
 2022-06-09 07:14:21 -05:00
Mike Black W9MDB 92ba0b92ac Fix TT599 RIG_LEVEL_NR 
https://github.com/Hamlib/Hamlib/issues/1061
 2022-06-08 17:10:26 -05:00
Mike Black W9MDB eb453db056 Hopefully fixed ELAD FDM Duo split setting 
https://github.com/Hamlib/Hamlib/issues/1062
 2022-06-08 16:52:49 -05:00
OM4AEI Peter Micuda 25a2a00c12 Fix TT599 SWR level reading 
Thanks to Peter Micuda OM4AEI
https://github.com/Hamlib/Hamlib/issues/1060
 2022-06-08 16:31:02 -05:00
Mike Black W9MDB 2a3fb3bb08 For FT990 add caching of VFO_OP data 
And add rig_flush before sending commands
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-08 09:12:23 -05:00
Mike Black W9MDB dc89d085d0 Fix Elad FDM-Duo split command -- was using TB but needs to be SP 2022-06-08 08:40:14 -05:00
Mike Black W9MDB e0d39b3dcb Change IC7800 mode definitions to allow for PKTUSB and PKTLSB 
https://github.com/Hamlib/Hamlib/issues/1057
 2022-06-07 17:40:38 -05:00
Mike Black W9MDB cca8d2b4ed For the FT-990 we can read VFOA frequency once. 
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-07 12:19:09 -05:00
Mike Black W9MDB 479c43afa1 Update cache for yaesu rigs when bypassing rig_* functions 
Update cache for FT991
Add polling for freq and mode in rig_open to prime those values
https://github.com/Hamlib/Hamlib/issues/1056
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-07 11:50:25 -05:00
Mike Black W9MDB ce99f4c75d Allow rig_set_split_mode to skip setting if mode already set 
https://github.com/Hamlib/Hamlib/issues/1056
 2022-06-07 08:33:18 -05:00
Mike Black W9MDB ad2f5047e0 Fix rig_set_lock_mode and rig_get_lock_mode 
https://github.com/Hamlib/Hamlib/issues/1044
 2022-06-06 22:54:10 -05:00
Mike Black W9MDB c17bcaa343 Fix TT599 set bandwidth to return control to bandwidth knob 
https://github.com/Hamlib/Hamlib/issues/1055
 2022-06-06 15:51:08 -05:00
Mike Black W9MDB 4360188643 Chanage ID-5100 to XONXOFF flow control 
https://github.com/Hamlib/Hamlib/issues/1053
 2022-06-03 22:13:00 -05:00
Mike Black W9MDB d12ca22916 Add PTT check in set_freq since rig cannot set freq while transmitting 
VOX mode was a problem so this ptt check should fix it.
https://github.com/Hamlib/Hamlib/issues/1052
 2022-06-03 08:11:32 -05:00
Mike Black W9MDB 8652741301 Add FT990UNI model for older FT990 ROM rigs that have to read all 1492 bytes 
For this model get_freq will return the cached value
So Hamlib will not follow manual frequency changes on the rig
https://github.com/Hamlib/Hamlib/issues/1050
 2022-06-03 07:40:11 -05:00
Mike Black W9MDB a468f0dee8 Allow Kenwood AI command for FA/FB async operation 
https://github.com/Hamlib/Hamlib/issues/1049
 2022-06-02 23:21:51 -05:00