Remove non-working compilation instructions from comments

Some instructions were a copy and paste error, some did not link
to Hamlib. Compile all simulators with: make -C simulators check
or compile a single simulator replacing "check" with the name of
the simulator.

Fixed with:
perl -pe 's,// gcc.*\n,,' -i *.c
perl -pe 's,// On mingw.*\n,,' -i *.c

simulators/simatd578.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simatd578 simatd578.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simeasycomm.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simspid simspid.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simelecraft.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simelecraftk4.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simft1000.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft1000 simft1000.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft450.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft710.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft736.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft897 simft897.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft747gx.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft747gx simft747gx.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft817.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft897 simft897.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft818.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft847.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft897 simft897.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft897.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft897 simft897.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simft990.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft990 simft990.c
 // emulates 1.2 ROM FT990 which can only read 1492 bytes
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this

simulators/simft991.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simftdx101.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simftdx1200.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simftdx3000.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simftdx5000.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic2730.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic275.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7000.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic705.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7100.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7200.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7300.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7600.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7610.c

@@ -1,8 +1,5 @@
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7700.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic7851.c

@@ -1,8 +1,5 @@
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic905.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic910.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic9100.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simic9700.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simicgeneric.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simicr8600.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simid5100.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simjupiter.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simft897 simft897.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simkenwood.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simmicom.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simspid simspid.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simorion.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simorion simorion.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simpmr171.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simprm171 simprm171.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simpowersdr.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simqrplabs.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simrotorez.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simspid simspid.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simspid.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simspid simspid.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simtmd700.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simtmd710.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simtrusdx.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simts450.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simts590.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simts890.c

@@ -1,6 +1,5 @@
 //#define TRACE /* Full traffic trace if enabled */
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simts890 -l hamlib simts890.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simts950.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0

simulators/simts990.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simxiegug90.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simxiegux108g.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simxiegux6100.c

@@ -1,9 +1,6 @@
 // simicom will show the pts port to use for rigctl on Unix
 // using virtual serial ports on Windows is to be developed yet
 // Needs a lot of improvement to work on all Icoms
-// gcc -g -Wall -o simicom simicom.c -lhamlib
-// On mingw in the hamlib src directory
-// gcc -static -I../include -g -Wall -o simicom simicom.c -L../../build/src/.libs -lhamlib -lwsock32 -lws2_32
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if  0

simulators/simyaesu.c

@@ -1,5 +1,4 @@
 // can run this using rigctl/rigctld and socat pty devices
-// gcc -o simyaesu simyaesu.c
 #define _XOPEN_SOURCE 700
 // since we are POSIX here we need this
 #if 0