kopia lustrzana https://github.com/Hamlib/Hamlib
44 wiersze
1.6 KiB
Plaintext
44 wiersze
1.6 KiB
Plaintext
|
Quirks, known bugs, and other notes.
|
||
|
|
====================================
|
||
|
|
|
||
|
|
In this document I'll try to describe the behavior of the Idiom Press
|
||
|
|
Rotor-EZ and RotorCard interfaces as well as the HyGain DCU-1/DCU-1X control
|
||
|
|
units with Hamlib. For background information see rotorez/rotorez.txt.
|
||
|
|
|
||
|
|
The Idiom Press interfaces are the most capable of the units supported by
|
||
|
|
this backend and all available commands are supported by these units at this
|
||
|
|
time. The HyGain control units only support a subset of the command set
|
||
|
|
involving rotor positioning.
|
||
|
|
|
||
|
|
This document is organized by Hamlib function calls and documents observed
|
||
|
|
behavior with each call.
|
||
|
|
|
||
|
|
rot_set_position
|
||
|
|
* Fractional values passed for azimuth are dropped. i.e. 180.6 becomes
|
||
|
|
180 while a value greater than 359.4999 is converted to 0 for DCU1/
|
||
|
|
DCU-1X compatibility.
|
||
|
|
* Allowed range for azimuth is 0 to 360.
|
||
|
|
* Values passed for elevation are ignored. The protocol only supports
|
||
|
|
azimuthal positioning
|
||
|
|
|
||
|
|
rot_get_position
|
||
|
|
* Position reading is returned in whole degrees from 0 to 359.
|
||
|
|
* Not supported by DCU-1/DCU-1X.
|
||
|
|
|
||
|
|
rotorez_rot_stop
|
||
|
|
* Causes immediate cessation of rotor positioning.
|
||
|
|
* Not supported by DCU-1/DCU-1X.
|
||
|
|
|
||
|
|
rot_set_conf
|
||
|
|
* Accepts one of E, e, J, j, O, o, S, and s (see rotorez/rotorez.txt)
|
||
|
|
in *val.
|
||
|
|
* The value in token is not used by the backend and may be safely
|
||
|
|
set to TOK_BACKEND_NONE.
|
||
|
|
* Not supported by DCU-1/DCU-1X.
|
||
|
|
|
||
|
|
BUGS
|
||
|
|
Please report all bugs to <hamlib-developer@users.sourceforge.net>
|
||
|
|
|
||
|
|
Nate Bargmann n0nb at arrl.net
|
||
|
|
|