Hamlib/yaesu/ft1000mp.h

220 wiersze
6.0 KiB
C
Czysty Zwykły widok Historia

/*
* ft1000mp.h - (C) Stephane Fillod 2002 (fillods@users.sourceforge.net)
*
* This shared library provides an API for communicating
* via serial interface to an FT-1000MP using the "CAT" interface
*
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#ifndef _FT1000MP_H
#define _FT1000MP_H 1
#define FT1000MP_STATUS_FLAGS_LENGTH 6 /* 0xfa return size */
#define FT1000MP_STATUS_UPDATE_LENGTH 16 /* 0x10 U = 02 return size */
#define FT1000MP_PACING_INTERVAL 5
#define FT1000MP_PACING_DEFAULT_VALUE 0
#define FT1000MP_WRITE_DELAY 50
/* Delay sequential fast writes */
#define FT1000MP_POST_WRITE_DELAY 5
/* Rough safe value for default timeout */
#define FT1000MP_DEFAULT_READ_TIMEOUT 28 * ( 3 + (FT1000MP_PACING_INTERVAL * FT1000MP_PACING_DEFAULT_VALUE))
/*
* 8N2 and 1 start bit = 11 bits at 4800 bps => effective byte rate = 1 byte in 2.2917 msec
* => 28 bytes in 64 msec
*
* delay for 1 byte = 2.2917 + (pace_interval * 5)
*
* pace_interval time to read 345 bytes
* ------------ ----------------------
*
* 0 64 msec
* 1 321 msec
* 2 642 msec
* 255 16.4 sec
*
*/
/*
* Native FT1000MP functions. More to come :-)
*
*/
enum ft1000mp_native_cmd_e {
FT1000MP_NATIVE_SPLIT_OFF = 0,
FT1000MP_NATIVE_SPLIT_ON,
FT1000MP_NATIVE_RECALL_MEM,
FT1000MP_NATIVE_VFO_TO_MEM,
FT1000MP_NATIVE_VFO_A,
FT1000MP_NATIVE_VFO_B,
FT1000MP_NATIVE_M_TO_VFO,
FT1000MP_NATIVE_RIT_ON,
FT1000MP_NATIVE_RIT_OFF,
FT1000MP_NATIVE_XIT_ON,
FT1000MP_NATIVE_XIT_OFF,
FT1000MP_NATIVE_FREQA_SET,
FT1000MP_NATIVE_FREQB_SET,
FT1000MP_NATIVE_MODE_SET_LSB,
FT1000MP_NATIVE_MODE_SET_USB,
FT1000MP_NATIVE_MODE_SET_CW,
FT1000MP_NATIVE_MODE_SET_CWR,
FT1000MP_NATIVE_MODE_SET_AM,
FT1000MP_NATIVE_MODE_SET_AMS,
FT1000MP_NATIVE_MODE_SET_FM,
FT1000MP_NATIVE_MODE_SET_FMW,
FT1000MP_NATIVE_MODE_SET_RTTY_LSB,
FT1000MP_NATIVE_MODE_SET_RTTY_USB,
FT1000MP_NATIVE_MODE_SET_DATA_LSB,
FT1000MP_NATIVE_MODE_SET_DATA_FM,
FT1000MP_NATIVE_PACING,
FT1000MP_NATIVE_PTT_OFF,
FT1000MP_NATIVE_PTT_ON,
FT1000MP_NATIVE_VFO_UPDATE,
FT1000MP_NATIVE_CURR_VFO_UPDATE,
FT1000MP_NATIVE_UPDATE,
FT1000MP_NATIVE_SIZE /* end marker, value indicates number of */
/* native cmd entries */
};
typedef enum ft1000mp_native_cmd_e ft1000mp_native_cmd_t;
/*
* Internal MODES - when setting modes via cmd_mode_set()
*
*/
#define MODE_SET_LSB 0x00
#define MODE_SET_USB 0x01
#define MODE_SET_CW 0x02
#define MODE_SET_CWR 0x03
#define MODE_SET_AM 0x04
#define MODE_SET_AMS 0x05
#define MODE_SET_FM 0x06
#define MODE_SET_FMW 0x07 /* what width is that? */
#define MODE_SET_RTTYL 0x08
#define MODE_SET_RTTYU 0x09
#define MODE_SET_PKTL 0x0a
#define MODE_SET_PKTF 0x0b
/*
* Mode Bitmap.
* When READING modes
*
*/
#define MODE_LSB 0x00
#define MODE_USB 0x01
#define MODE_CW 0x02
#define MODE_AM 0x03
#define MODE_FM 0x04
#define MODE_RTTY 0x05
#define MODE_PKT 0x06
/* relevant bits: 5,6,7 */
#define MODE_MASK 0x07
/*
* Status Flag Masks when reading
*
*/
#define SF_DLOCK 0x01
#define SF_SPLITA 0x01
#define SF_SPLITB 0x02
#define SF_CLAR 0x04
#define SF_VFOAB 0x10 /* Status byte 0, bit 4, VFO A == 0, VFO B == 1 */
#define SF_VFOMR 0x10
#define SF_RXTX 0x20
#define SF_RESV 0x40
#define SF_PRI 0x80
/*
* Local VFO CMD's, according to spec
*
*/
#define FT1000MP_VFO_A 0x00
#define FT1000MP_VFO_B 0x01
/*
* Some useful offsets in the status update map (offset)
*
*/
#define FT1000MP_SUMO_DISPLAYED_STATUS 0x00
#define FT1000MP_SUMO_DISPLAYED_FREQ 0x01
#define FT1000MP_SUMO_VFO_A_FREQ 0x01
#define FT1000MP_SUMO_VFO_B_FREQ 0x11
#define FT1000MP_SUMO_VFO_A_CLAR 0x05
#define FT1000MP_SUMO_VFO_B_CLAR 0x15
#define FT1000MP_SUMO_VFO_A_MODE 0x07
#define FT1000MP_SUMO_VFO_B_MODE 0x17
#define FT1000MP_SUMO_VFO_A_IF 0x08
#define FT1000MP_SUMO_VFO_B_IF 0x18
/* mask extra mode bit from IF Filter status byte in VFO status
block */
#define IF_MODE_MASK 0x80
/*
* API local implementation
*
*/
int ft1000mp_init(RIG *rig);
int ft1000mp_cleanup(RIG *rig);
int ft1000mp_open(RIG *rig);
int ft1000mp_close(RIG *rig);
int ft1000mp_set_freq(RIG *rig, vfo_t vfo, freq_t freq);
int ft1000mp_get_freq(RIG *rig, vfo_t vfo, freq_t *freq);
int ft1000mp_set_mode(RIG *rig, vfo_t vfo, rmode_t mode, pbwidth_t width); /* select mode */
int ft1000mp_get_mode(RIG *rig, vfo_t vfo, rmode_t *mode, pbwidth_t *width); /* get mode */
int ft1000mp_set_vfo(RIG *rig, vfo_t vfo); /* select vfo */
int ft1000mp_get_vfo(RIG *rig, vfo_t *vfo); /* get vfo */
int ft1000mp_set_rit(RIG *rig, vfo_t vfo, shortfreq_t rit);
int ft1000mp_get_rit(RIG *rig, vfo_t vfo, shortfreq_t *rit);
int ft1000mp_set_xit(RIG *rig, vfo_t vfo, shortfreq_t xit);
int ft1000mp_get_xit(RIG *rig, vfo_t vfo, shortfreq_t *xit);
int ft1000mp_get_level(RIG *rig, vfo_t vfo, setting_t level, value_t *val);
int ft1000mp_set_ptt(RIG *rig, vfo_t vfo, ptt_t ptt);
#endif /* _FT1000MP_H */