Hamlib/icom/delta2.c

/*
 *  Hamlib CI-V backend - description of the TenTenc DeltaII
 *  Copyright (c) 2000-2010 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or modify
 *   it under the terms of the GNU Library General Public License as
 *   published by the Free Software Foundation; either version 2 of
 *   the License, or (at your option) any later version.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *   GNU Library General Public License for more details.
 *
 *   You should have received a copy of the GNU Library General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

/*
 * Delta II (aka TT 536) cloned after Omni VI.
 * Needs RS-232 Serial Level Converter Model 305 or equivalent.
 *
 * For changing CI-V address of the rig, see:
 *   http://www.tentecwiki.org/doku.php?id=536addr
 */

/* Known problems:
 *
 * To Do: get the datasheet, and testing on real hardware!!
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"

#define DELTAII_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)

#define DELTAII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)

#define DELTAII_ALL_RX_MODES (DELTAII_OTHER_TX_MODES|RIG_MODE_AM)

#define DELTAII_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define DELTAII_STR_CAL { 0, { } }


static const struct icom_priv_caps delta2_priv_caps = { 
		0x01,	/* default address */
		1,		/* 731 mode */
		ic737_ts_sc_list  /* TODO: ts_sc_list */
};

const struct rig_caps delta2_caps = {
.rig_model =  RIG_MODEL_DELTAII,
.model_name = "Delta II", 
.mfg_name =  "Ten-Tec", 
.version =  "0.1", 
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_TRANSCEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_NONE,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  1200,
.serial_rate_max =  1200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE, 
.write_delay =  0,
.post_write_delay =  0,
.timeout =  200,
.retry =  3, 
.has_get_func =  RIG_FUNC_NONE,
.has_set_func =  RIG_FUNC_NONE, 
.has_get_level =  RIG_LEVEL_NONE,
.has_set_level =  RIG_LEVEL_NONE,
.has_get_parm =  RIG_PARM_NONE,
.has_set_parm =  RIG_PARM_NONE,
.level_gran =  {},
.parm_gran =  {},
.preamp =   { RIG_DBLST_END, },
.attenuator =   { RIG_DBLST_END, },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  DELTAII_VFO_OPS,
.scan_ops =  RIG_SCAN_NONE,
.str_cal =  DELTAII_STR_CAL,
.transceive =  RIG_TRN_RIG,
.bank_qty =   0,
.chan_desc_sz =  0,

.chan_list =  {
    /* TODO: 32 simplex, 16 duplex */
    { 0, 47, RIG_MTYPE_MEM, IC_MIN_MEM_CAP }, 
                RIG_CHAN_END, },
.rx_range_list1 =   {
	RIG_FRNG_END, },
.tx_range_list1 =  { RIG_FRNG_END, },

/* These limits measured on Omni VI SN 1A10473 */
.rx_range_list2 =   { 
    {kHz(100),kHz(29999),DELTAII_ALL_RX_MODES,-1,-1,DELTAII_VFO_ALL},
	RIG_FRNG_END, },

/* Note: There is no AM mode. */
.tx_range_list2 =  { 
    {kHz(1800),MHz(2)-1,DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL}, 
    {kHz(3500),MHz(4)-1,DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
	{MHz(7),kHz(7300),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
    {kHz(10100),kHz(10150),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
    {MHz(14),kHz(14350),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
    {kHz(18068),kHz(18168),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
    {MHz(21),kHz(21450),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
    {kHz(24890),kHz(24990),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
    {MHz(28),kHz(29700),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
	RIG_FRNG_END, },

.tuning_steps = 	{
	 {DELTAII_ALL_RX_MODES, Hz(10)},        // This radio has 10 Hz steps.
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters!
	 */
.filters = 	{
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
		{RIG_MODE_AM, kHz(6)},
		{RIG_MODE_FM, kHz(15)},
		RIG_FLT_END,
	},
.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&delta2_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,       // icom.c has no get_vfo

.decode_event =  icom_decode_event,
.set_mem =  icom_set_mem,
.vfo_op =  icom_vfo_op,
};