Hamlib/icom/delta2.c

162 wiersze
4.7 KiB
C

/*
* Hamlib CI-V backend - description of the TenTenc DeltaII
* Copyright (c) 2000-2010 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* Delta II (aka TT 536) cloned after Omni VI.
* Needs RS-232 Serial Level Converter Model 305 or equivalent.
*
* For changing CI-V address of the rig, see:
* http://www.tentecwiki.org/doku.php?id=536addr
*/
/* Known problems:
*
* To Do: get the datasheet, and testing on real hardware!!
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#include "misc.h"
#define DELTAII_VFO_ALL (RIG_VFO_A|RIG_VFO_B|RIG_VFO_MEM)
#define DELTAII_OTHER_TX_MODES (RIG_MODE_CW|RIG_MODE_SSB|RIG_MODE_FM)
#define DELTAII_ALL_RX_MODES (DELTAII_OTHER_TX_MODES|RIG_MODE_AM)
#define DELTAII_VFO_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO)
#define DELTAII_STR_CAL { 0, { } }
static const struct icom_priv_caps delta2_priv_caps = {
0x01, /* default address */
1, /* 731 mode */
ic737_ts_sc_list /* TODO: ts_sc_list */
};
const struct rig_caps delta2_caps = {
.rig_model = RIG_MODEL_DELTAII,
.model_name = "Delta II",
.mfg_name = "Ten-Tec",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_TRANSCEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_NONE,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 1200,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.has_get_func = RIG_FUNC_NONE,
.has_set_func = RIG_FUNC_NONE,
.has_get_level = RIG_LEVEL_NONE,
.has_set_level = RIG_LEVEL_NONE,
.has_get_parm = RIG_PARM_NONE,
.has_set_parm = RIG_PARM_NONE,
.level_gran = {},
.parm_gran = {},
.preamp = { RIG_DBLST_END, },
.attenuator = { RIG_DBLST_END, },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = DELTAII_VFO_OPS,
.scan_ops = RIG_SCAN_NONE,
.str_cal = DELTAII_STR_CAL,
.transceive = RIG_TRN_RIG,
.bank_qty = 0,
.chan_desc_sz = 0,
.chan_list = {
/* TODO: 32 simplex, 16 duplex */
{ 0, 47, RIG_MTYPE_MEM, IC_MIN_MEM_CAP },
RIG_CHAN_END, },
.rx_range_list1 = {
RIG_FRNG_END, },
.tx_range_list1 = { RIG_FRNG_END, },
/* These limits measured on Omni VI SN 1A10473 */
.rx_range_list2 = {
{kHz(100),kHz(29999),DELTAII_ALL_RX_MODES,-1,-1,DELTAII_VFO_ALL},
RIG_FRNG_END, },
/* Note: There is no AM mode. */
.tx_range_list2 = {
{kHz(1800),MHz(2)-1,DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{kHz(3500),MHz(4)-1,DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{MHz(7),kHz(7300),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{kHz(10100),kHz(10150),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{MHz(14),kHz(14350),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{kHz(18068),kHz(18168),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{MHz(21),kHz(21450),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{kHz(24890),kHz(24990),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
{MHz(28),kHz(29700),DELTAII_OTHER_TX_MODES,5000,100000,DELTAII_VFO_ALL},
RIG_FRNG_END, },
.tuning_steps = {
{DELTAII_ALL_RX_MODES, Hz(10)}, // This radio has 10 Hz steps.
RIG_TS_END,
},
/* mode/filter list, remember: order matters!
*/
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_AM, kHz(6)},
{RIG_MODE_FM, kHz(15)},
RIG_FLT_END,
},
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&delta2_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo, // icom.c has no get_vfo
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.vfo_op = icom_vfo_op,
};