Hamlib/icom/icr9500.c

/*
 *  Hamlib CI-V backend - IC-R9500 descriptions
 *  Copyright (c) 2000-2011 by Stephane Fillod
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>

#include <hamlib/rig.h>
#include "serial.h"
#include "misc.h"
#include "idx_builtin.h"

#include "icom.h"
#include "icom_defs.h"
#include "frame.h"


#define ICR9500_MODES (RIG_MODE_AM|RIG_MODE_AMS|\
        RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|\
        RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_WFM)

#define ICR9500_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)

#define ICR9500_FUNCS (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_NR|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK)
#define ICR9500_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_NOTCHF_RAW|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF)
#define ICR9500_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
#define ICR9500_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO)	/* TBC */

#define ICR9500_HF_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)

#define ICR9500_VFOS (RIG_VFO_A|RIG_VFO_MEM)

#define ICR9500_MEM_CAP { /* FIXME */   \
        .freq = 1,  \
        .mode = 1,  \
        .width = 1, \
        .levels = RIG_LEVEL_ATT, \
}


/* TODO: S-Meter measurements */
#define ICR9500_STR_CAL	UNKNOWN_IC_STR_CAL

static const struct icom_priv_caps icr9500_priv_caps = {
	0x72,   /* default address */
	0,      /* 731 mode */
  0,      /* no XCHG */
	r9500_ts_sc_list
};

/*
 * ICR9500A rig capabilities.
 */
const struct rig_caps icr9500_caps = {
.rig_model =  RIG_MODEL_ICR9500,
.model_name = "IC-R9500",
.mfg_name =  "Icom",
.version =  BACKEND_VER ".1",
.copyright =  "LGPL",
.status =  RIG_STATUS_UNTESTED,
.rig_type =  RIG_TYPE_RECEIVER,
.ptt_type =  RIG_PTT_NONE,
.dcd_type =  RIG_DCD_RIG,
.port_type =  RIG_PORT_SERIAL,
.serial_rate_min =  300,
.serial_rate_max =  1200,
.serial_data_bits =  8,
.serial_stop_bits =  1,
.serial_parity =  RIG_PARITY_NONE,
.serial_handshake =  RIG_HANDSHAKE_NONE,
.write_delay =  0,
.post_write_delay =  0,
.timeout =  1000,
.retry =  3,

.has_get_func =  ICR9500_FUNCS,
.has_set_func =  ICR9500_FUNCS,
.has_get_level =  ICR9500_LEVELS,
.has_set_level =  RIG_LEVEL_SET(ICR9500_LEVELS),
.has_get_parm =  ICR9500_PARMS,
.has_set_parm =  RIG_PARM_SET(ICR9500_PARMS),
.level_gran = {
	[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran =  {},
.ctcss_list =  common_ctcss_list,
.dcs_list =  common_dcs_list,
.preamp =   { 10, 20, RIG_DBLST_END },  /* FIXME: TBC */
.attenuator =   { 6, 10, 12, 18, 20, 24, 30, RIG_DBLST_END },
.max_rit =  Hz(0),
.max_xit =  Hz(0),
.max_ifshift =  Hz(0),
.targetable_vfo =  0,
.vfo_ops =  ICR9500_OPS,
.scan_ops =  ICR9500_SCAN_OPS,
.transceive =  RIG_TRN_RIG,
.bank_qty =   12,
.chan_desc_sz =  0, /* FIXME */

.chan_list =  {
	{    0,  999, RIG_MTYPE_MEM,  ICR9500_MEM_CAP },	/* TBC */
	{ 1000, 1099, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-A (Auto) */
	{ 1100, 1199, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-S (skip) */
	{ 1200, 1219, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP },	/* Bank-P (Scan edge), 2 by 2 */
	RIG_CHAN_END, },

.rx_range_list1 =  {
	{kHz(5),MHz(30)-1,ICR9500_MODES,-1,-1, ICR9500_VFOS, ICR9500_HF_ANTS},
	{MHz(30),MHz(3335),ICR9500_MODES,-1,-1, ICR9500_VFOS, RIG_ANT_4},
 	RIG_FRNG_END, },
.tx_range_list1 =  { RIG_FRNG_END, },

.rx_range_list2 =  {
	{kHz(5),MHz(30)-1,ICR9500_MODES,-1,-1, ICR9500_VFOS, ICR9500_HF_ANTS},
	{MHz(30),MHz(3335),ICR9500_MODES,-1,-1, ICR9500_VFOS, RIG_ANT_4},
 	RIG_FRNG_END, },
.tx_range_list2 =  { RIG_FRNG_END, },	/* no TX ranges, this is a receiver */

.tuning_steps =  {
	 {ICR9500_MODES,1},	/* resolution */
	 {ICR9500_MODES,10},
	 {ICR9500_MODES,100},
	 {ICR9500_MODES,kHz(1)},
	 {ICR9500_MODES,kHz(2.5)},
	 {ICR9500_MODES,kHz(5)},
	 {ICR9500_MODES,kHz(6.25)},
	 {ICR9500_MODES,kHz(9)},
	 {ICR9500_MODES,kHz(10)},
	 {ICR9500_MODES,12500},
	 {ICR9500_MODES,kHz(20)},
	 {ICR9500_MODES,kHz(25)},
	 {ICR9500_MODES,kHz(100)},
	 {ICR9500_MODES,MHz(1)},
	 RIG_TS_END,
	},
	/* mode/filter list, remember: order matters! */
.filters =  {
		{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
		{RIG_MODE_CW, Hz(500)},
		{RIG_MODE_AM|RIG_MODE_AMS, kHz(6)},
		{RIG_MODE_FM, kHz(15)},
		{RIG_MODE_WFM, kHz(350)},
		RIG_FLT_END,
	},
.str_cal = ICR9500_STR_CAL,

.cfgparams =  icom_cfg_params,
.set_conf =  icom_set_conf,
.get_conf =  icom_get_conf,

.priv =  (void*)&icr9500_priv_caps,
.rig_init =   icom_init,
.rig_cleanup =   icom_cleanup,
.rig_open =  NULL,
.rig_close =  NULL,

.set_freq =  icom_set_freq,
.get_freq =  icom_get_freq,
.set_mode =  icom_set_mode,
.get_mode =  icom_get_mode,
.set_vfo =  icom_set_vfo,
.set_ant =  icom_set_ant,
.get_ant =  icom_get_ant,
.set_rptr_shift =  icom_set_rptr_shift,
.get_rptr_shift =  icom_get_rptr_shift,
.set_rptr_offs =  icom_set_rptr_offs,
.get_rptr_offs =  icom_get_rptr_offs,
.set_ctcss_sql =  icom_set_ctcss_sql,
.get_ctcss_sql =  icom_get_ctcss_sql,
.set_dcs_sql =  icom_set_dcs_code,
.get_dcs_sql =  icom_get_dcs_code,

.set_ts =  icom_set_ts,
.get_ts =  icom_get_ts,
.set_func =  icom_set_func,
.get_func =  icom_get_func,
.set_level =  icom_set_level,
.get_level =  icom_get_level,
.set_parm =  icom_set_parm,
.get_parm =  icom_get_parm,

.decode_event =  icom_decode_event,
.set_mem =  icom_set_mem,
.set_bank =  icom_set_bank,
.vfo_op =  icom_vfo_op,
.scan =  icom_scan,
.get_dcd =  icom_get_dcd,
};


/*
 * Function definitions below
 */