Hamlib-1.2.14
Stephane Fillod 2011-03-28 18:56:05 +02:00
rodzic 0c7966fc30
commit 01db7a309f
5 zmienionych plików z 240 dodań i 3 usunięć

Wyświetl plik

@ -3,7 +3,7 @@ ICOMSRCLIST = ic706.c icr8500.c ic735.c ic775.c ic756.c \
icr7000.c ic910.c ic970.c ic725.c ic737.c ic718.c \
os535.c os456.c omni.c delta2.c ic92d.c \
ic736.c ic738.c ic746.c ic703.c ic726.c ic271.c \
ic765.c ic781.c ic471.c id1.c icr9000.c \
ic765.c ic781.c ic471.c id1.c icr9000.c icr9500.c \
icr10.c icr20.c icr71.c icr72.c icr75.c \
ic707.c ic728.c ic751.c ic761.c \
ic78.c ic7800.c ic7000.c ic7200.c ic7600.c ic7700.c

Wyświetl plik

@ -113,6 +113,24 @@ const struct ts_sc_list r9000_ts_sc_list[] = {
{ 0, 0 },
};
const struct ts_sc_list r9500_ts_sc_list[] = {
{ 1, 0x00 },
{ 10, 0x01 },
{ 100, 0x02 },
{ kHz(1), 0x03 },
{ kHz(2.5), 0x04 },
{ kHz(5), 0x05 },
{ 6250, 0x06 },
{ kHz(9), 0x07 },
{ kHz(10), 0x08 },
{ 12500, 0x09 },
{ kHz(20), 0x10 },
{ kHz(25), 0x11 },
{ kHz(100), 0x12 },
{ MHz(1), 0x13 },
{ 0, 0 },
};
const struct ts_sc_list ic718_ts_sc_list[] = {
{ 10, 0x00 },
{ kHz(1), 0x01 },
@ -289,6 +307,7 @@ static const struct icom_addr icom_addr_list[] = {
{ RIG_MODEL_ICR7100, 0x34 },
{ RIG_MODEL_ICR8500, 0x4a },
{ RIG_MODEL_ICR9000, 0x2a },
{ RIG_MODEL_ICR9500, 0x72 },
{ RIG_MODEL_MINISCOUT, 0x94 },
{ RIG_MODEL_IC718, 0x5e },
{ RIG_MODEL_OS535, 0x80 },
@ -3165,6 +3184,7 @@ DECLARE_INITRIG_BACKEND(icom)
rig_register(&icr7100_caps);
rig_register(&icr8500_caps);
rig_register(&icr9000_caps);
rig_register(&icr9500_caps);
rig_register(&ic271_caps);
rig_register(&ic275_caps);

Wyświetl plik

@ -123,6 +123,7 @@ extern const struct ts_sc_list ic737_ts_sc_list[];
extern const struct ts_sc_list r75_ts_sc_list[];
extern const struct ts_sc_list r7100_ts_sc_list[];
extern const struct ts_sc_list r9000_ts_sc_list[];
extern const struct ts_sc_list r9500_ts_sc_list[];
extern const struct ts_sc_list ic756_ts_sc_list[];
extern const struct ts_sc_list ic756pro_ts_sc_list[];
extern const struct ts_sc_list ic706_ts_sc_list[];
@ -228,6 +229,7 @@ extern const struct rig_caps icr7000_caps;
extern const struct rig_caps icr7100_caps;
extern const struct rig_caps icr8500_caps;
extern const struct rig_caps icr9000_caps;
extern const struct rig_caps icr9500_caps;
extern const struct rig_caps ic271_caps;
extern const struct rig_caps ic275_caps;
extern const struct rig_caps ic471_caps;

214
icom/icr9500.c 100644
Wyświetl plik

@ -0,0 +1,214 @@
/*
* Hamlib CI-V backend - IC-R9500 descriptions
* Copyright (c) 2000-2011 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <hamlib/rig.h>
#include "serial.h"
#include "misc.h"
#include "idx_builtin.h"
#include "icom.h"
#include "icom_defs.h"
#include "frame.h"
#define ICR9500_MODES (RIG_MODE_AM|RIG_MODE_AMS|\
RIG_MODE_SSB|RIG_MODE_FM|RIG_MODE_RTTY|RIG_MODE_RTTYR|\
RIG_MODE_CW|RIG_MODE_CWR|RIG_MODE_WFM)
#define ICR9500_OPS (RIG_OP_FROM_VFO|RIG_OP_TO_VFO|RIG_OP_MCL)
#define ICR9500_FUNCS (RIG_FUNC_FAGC|RIG_FUNC_NB|RIG_FUNC_TSQL|RIG_FUNC_NR|RIG_FUNC_MN|RIG_FUNC_ANF|RIG_FUNC_VSC|RIG_FUNC_LOCK)
#define ICR9500_LEVELS (RIG_LEVEL_PREAMP|RIG_LEVEL_ATT|RIG_LEVEL_AGC|RIG_LEVEL_NR|RIG_LEVEL_PBT_IN|RIG_LEVEL_PBT_OUT|RIG_LEVEL_CWPITCH|RIG_LEVEL_NOTCHF|RIG_LEVEL_SQL|RIG_LEVEL_RAWSTR|RIG_LEVEL_AF|RIG_LEVEL_RF|RIG_LEVEL_APF)
#define ICR9500_PARMS (RIG_PARM_ANN|RIG_PARM_BACKLIGHT)
#define ICR9500_SCAN_OPS (RIG_SCAN_MEM|RIG_SCAN_VFO|RIG_SCAN_SLCT|RIG_SCAN_PRIO) /* TBC */
#define ICR9500_HF_ANTS (RIG_ANT_1|RIG_ANT_2|RIG_ANT_3)
#define ICR9500_VFOS (RIG_VFO_A|RIG_VFO_MEM)
#define ICR9500_MEM_CAP { /* FIXME */ \
.freq = 1, \
.mode = 1, \
.width = 1, \
.levels = RIG_LEVEL_ATT, \
}
/* TODO: S-Meter measurements */
#define ICR9500_STR_CAL UNKNOWN_IC_STR_CAL
static const struct icom_priv_caps icr9500_priv_caps = {
0x72, /* default address */
0, /* 731 mode */
r9500_ts_sc_list
};
/*
* ICR9500A rig capabilities.
*/
const struct rig_caps icr9500_caps = {
.rig_model = RIG_MODEL_ICR9500,
.model_name = "IC-R9500",
.mfg_name = "Icom",
.version = BACKEND_VER ".1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rig_type = RIG_TYPE_RECEIVER,
.ptt_type = RIG_PTT_NONE,
.dcd_type = RIG_DCD_RIG,
.port_type = RIG_PORT_SERIAL,
.serial_rate_min = 300,
.serial_rate_max = 1200,
.serial_data_bits = 8,
.serial_stop_bits = 1,
.serial_parity = RIG_PARITY_NONE,
.serial_handshake = RIG_HANDSHAKE_NONE,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 1000,
.retry = 3,
.has_get_func = ICR9500_FUNCS,
.has_set_func = ICR9500_FUNCS,
.has_get_level = ICR9500_LEVELS,
.has_set_level = RIG_LEVEL_SET(ICR9500_LEVELS),
.has_get_parm = ICR9500_PARMS,
.has_set_parm = RIG_PARM_SET(ICR9500_PARMS),
.level_gran = {
[LVL_RAWSTR] = { .min = { .i = 0 }, .max = { .i = 255 } },
},
.parm_gran = {},
.ctcss_list = common_ctcss_list,
.dcs_list = common_dcs_list,
.preamp = { 10, 20, RIG_DBLST_END }, /* FIXME: TBC */
.attenuator = { 6, 10, 12, 18, 20, 24, 30, RIG_DBLST_END },
.max_rit = Hz(0),
.max_xit = Hz(0),
.max_ifshift = Hz(0),
.targetable_vfo = 0,
.vfo_ops = ICR9500_OPS,
.scan_ops = ICR9500_SCAN_OPS,
.transceive = RIG_TRN_RIG,
.bank_qty = 12,
.chan_desc_sz = 0, /* FIXME */
.chan_list = {
{ 0, 999, RIG_MTYPE_MEM, ICR9500_MEM_CAP }, /* TBC */
{ 1000, 1099, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-A (Auto) */
{ 1100, 1199, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-S (skip) */
{ 1200, 1219, RIG_MTYPE_EDGE, IC_MIN_MEM_CAP }, /* Bank-P (Scan edge), 2 by 2 */
RIG_CHAN_END, },
.rx_range_list1 = {
{kHz(5),MHz(30)-1,ICR9500_MODES,-1,-1, ICR9500_VFOS, ICR9500_HF_ANTS},
{MHz(30),MHz(3335),ICR9500_MODES,-1,-1, ICR9500_VFOS, RIG_ANT_4},
RIG_FRNG_END, },
.tx_range_list1 = { RIG_FRNG_END, },
.rx_range_list2 = {
{kHz(5),MHz(30)-1,ICR9500_MODES,-1,-1, ICR9500_VFOS, ICR9500_HF_ANTS},
{MHz(30),MHz(3335),ICR9500_MODES,-1,-1, ICR9500_VFOS, RIG_ANT_4},
RIG_FRNG_END, },
.tx_range_list2 = { RIG_FRNG_END, }, /* no TX ranges, this is a receiver */
.tuning_steps = {
{ICR9500_MODES,1}, /* resolution */
{ICR9500_MODES,10},
{ICR9500_MODES,100},
{ICR9500_MODES,kHz(1)},
{ICR9500_MODES,kHz(2.5)},
{ICR9500_MODES,kHz(5)},
{ICR9500_MODES,kHz(6.25)},
{ICR9500_MODES,kHz(9)},
{ICR9500_MODES,kHz(10)},
{ICR9500_MODES,12500},
{ICR9500_MODES,kHz(20)},
{ICR9500_MODES,kHz(25)},
{ICR9500_MODES,kHz(100)},
{ICR9500_MODES,MHz(1)},
RIG_TS_END,
},
/* mode/filter list, remember: order matters! */
.filters = {
{RIG_MODE_SSB|RIG_MODE_CW|RIG_MODE_RTTY, kHz(2.4)},
{RIG_MODE_CW, Hz(500)},
{RIG_MODE_AM|RIG_MODE_AMS, kHz(6)},
{RIG_MODE_FM, kHz(15)},
{RIG_MODE_WFM, kHz(350)},
RIG_FLT_END,
},
.str_cal = ICR9500_STR_CAL,
.cfgparams = icom_cfg_params,
.set_conf = icom_set_conf,
.get_conf = icom_get_conf,
.priv = (void*)&icr9500_priv_caps,
.rig_init = icom_init,
.rig_cleanup = icom_cleanup,
.rig_open = NULL,
.rig_close = NULL,
.set_freq = icom_set_freq,
.get_freq = icom_get_freq,
.set_mode = icom_set_mode,
.get_mode = icom_get_mode,
.set_vfo = icom_set_vfo,
.set_ant = icom_set_ant,
.get_ant = icom_get_ant,
.set_rptr_shift = icom_set_rptr_shift,
.get_rptr_shift = icom_get_rptr_shift,
.set_rptr_offs = icom_set_rptr_offs,
.get_rptr_offs = icom_get_rptr_offs,
.set_ctcss_sql = icom_set_ctcss_sql,
.get_ctcss_sql = icom_get_ctcss_sql,
.set_dcs_sql = icom_set_dcs_code,
.get_dcs_sql = icom_get_dcs_code,
.set_ts = icom_set_ts,
.get_ts = icom_get_ts,
.set_func = icom_set_func,
.get_func = icom_get_func,
.set_level = icom_set_level,
.get_level = icom_get_level,
.set_parm = icom_set_parm,
.get_parm = icom_get_parm,
.decode_event = icom_decode_event,
.set_mem = icom_set_mem,
.set_bank = icom_set_bank,
.vfo_op = icom_vfo_op,
.scan = icom_scan,
.get_dcd = icom_get_dcd,
};
/*
* Function definitions below
*/

Wyświetl plik

@ -1,7 +1,7 @@
/*
* Hamlib Interface - list of known rigs
* Copyright (c) 2000-2003 by Frank Singleton
* Copyright (c) 2000-2010 by Stephane Fillod
* Copyright (c) 2000-2011 by Stephane Fillod
*
*
* This library is free software; you can redistribute it and/or modify
@ -196,7 +196,8 @@
#define RIG_MODEL_IC7700 RIG_MAKE_MODEL(RIG_ICOM, 62)
#define RIG_MODEL_IC7600 RIG_MAKE_MODEL(RIG_ICOM, 63)
#define RIG_MODEL_IC92D RIG_MAKE_MODEL(RIG_ICOM, 65)
/* next one is 66 */
#define RIG_MODEL_ICR9500 RIG_MAKE_MODEL(RIG_ICOM, 66)
/* next one is 67 */
/*
* Optoelectronics (CI-V)