Hamlib/kit/pcrotor.c

139 wiersze
3.4 KiB
C
Czysty Zwykły widok Historia

/*
* Hamlib Rotator backend - PcRotor/WA6UFQ parallel port
* Copyright (c) 2001-2008 by Stephane Fillod
*
* $Id: pcrotor.c,v 1.1 2008-10-31 07:45:17 fillods Exp $
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Library General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <stdlib.h>
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include "hamlib/rotator.h"
#include "parallel.h"
#include "misc.h"
/* ************************************************************************* */
//pcrotor_set_position(ROT *rot, azimuth_t az, elevation_t el)
#define PCROTOR_POWER 0x20
#define PCROTOR_CW 0x40
#define PCROTOR_CCW 0x80
#define PCROTOR_MASK (PCROTOR_CCW|PCROTOR_CW|PCROTOR_POWER)
static int setDirection(hamlib_port_t *port, unsigned char outputvalue)
{
int ret;
par_lock (port);
/* set the data bits.
* Should we read before write to not trample the lower significant bits?
*/
ret = par_write_data(port, outputvalue);
par_unlock (port);
return ret;
}
static int
pcrotor_stop(ROT *rot)
{
/* CW=0, CCW=0, Power-up=0 */
return setDirection(&rot->state.rotport, 0);
}
static int
pcrotor_move(ROT *rot, int direction, int speed)
{
unsigned char outputvalue;
rig_debug(RIG_DEBUG_TRACE, "%s called: %d %d\n", __FUNCTION__, direction, speed);
switch(direction) {
case ROT_MOVE_CCW:
outputvalue = PCROTOR_POWER|PCROTOR_CCW;
break;
case ROT_MOVE_CW:
outputvalue = PCROTOR_POWER|PCROTOR_CCW;
break;
case 0:
/* Stop */
outputvalue = 0;
break;
default:
return -RIG_EINVAL;
}
return setDirection(&rot->state.rotport, outputvalue);
}
/* ************************************************************************* */
/*
* PcRotor rotator capabilities.
*
* Control Interface schematics from, courtersy of Bob Hillard WA6UFQ:
* http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=11173
*
* DB25-7=Data-5= Power up/Sleep
* DB25-8=Data-6= CW
* DB25-9=Data-7= CCW
*
* There's no feedback.
*/
/** Fodtrack implement essentially only the set position function.
*
*/
const struct rot_caps pcrotor_caps = {
.rot_model = ROT_MODEL_PCROTOR,
.model_name = "PcRotor",
.mfg_name = "WA6UFQ",
.version = "0.1",
.copyright = "LGPL",
.status = RIG_STATUS_UNTESTED,
.rot_type = ROT_TYPE_OTHER,
.port_type = RIG_PORT_PARALLEL,
.write_delay = 0,
.post_write_delay = 0,
.timeout = 200,
.retry = 3,
.min_az = 0,
.max_az = 360,
.min_el = 0,
.max_el = 0,
.priv = NULL, /* priv */
.move = pcrotor_move,
.stop = pcrotor_stop,
//.set_position = pcrotor_set_position,
//.get_position = pcrotor_get_position,
};
/* end of file */