mirror
/
Arduino-RFM69HCW-GPS
kopia lustrzana https://github.com/SnkMtn000/Arduino-RFM69HCW-GPS
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

master
SnkMtn000 2018-01-31 18:10:50 -05:00 zatwierdzone przez GitHub
rodzic f39696e62c
commit 55a70f4bd9
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 3 dodań i 3 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

6
README.md
Wyświetl plik

@ -1,12 +1,12 @@
# Arduino-RFM69HCW-GPS
I stand on the shoulder of giants.
I stand on the shoulders of giants.
My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch.
My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch. I thank each of you.
Supported board I created and shared at: https://oshpark.com/shared_projects/vCLw90ht I drive everything, promini33, rfm69hcw and GPS, from the pro-mini 3.3v requlator with success from a 9vdc battery, but cannot not recommend this. I'm using a Ublox NEO-6 GPS Module with great success. Take care of the ceramic antenna. It is a brick dangling on a thread and when the center conductor breaks fails to work. I've repaird mine by stripping back the thin coax and making a very tiny light weight and high gain 1.5 GHz ground plane antenna.
These sketches may also work with the adafruit feather M0 with the noted pin changes in software. I do not have one and could not test.
These sketches may also work with the adafruit feather M0 with the noted pin changes in software. I do not have one and could not test. (In process). Check the pin definitions on back of feather.
Three modes supported, Morse, Feld Hell, and RTTY 5N1 170Hz.