From 55a70f4bd9bb58bb9bfdc003d8a6240906b71df9 Mon Sep 17 00:00:00 2001 From: SnkMtn000 Date: Wed, 31 Jan 2018 18:10:50 -0500 Subject: [PATCH] Update README.md --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index a72ac73..2ee163f 100644 --- a/README.md +++ b/README.md @@ -1,12 +1,12 @@ # Arduino-RFM69HCW-GPS -I stand on the shoulder of giants. +I stand on the shoulders of giants. -My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch. +My code/sketches are built on previously shared code by three other contributers. They are noted at the top at each arduino sketch. I thank each of you. Supported board I created and shared at: https://oshpark.com/shared_projects/vCLw90ht I drive everything, promini33, rfm69hcw and GPS, from the pro-mini 3.3v requlator with success from a 9vdc battery, but cannot not recommend this. I'm using a Ublox NEO-6 GPS Module with great success. Take care of the ceramic antenna. It is a brick dangling on a thread and when the center conductor breaks fails to work. I've repaird mine by stripping back the thin coax and making a very tiny light weight and high gain 1.5 GHz ground plane antenna. -These sketches may also work with the adafruit feather M0 with the noted pin changes in software. I do not have one and could not test. +These sketches may also work with the adafruit feather M0 with the noted pin changes in software. I do not have one and could not test. (In process). Check the pin definitions on back of feather. Three modes supported, Morse, Feld Hell, and RTTY 5N1 170Hz.