Citizen4 Forgejo

Raspberry Pi Framebuffer Copy. This program used for copy primary framebuffer to secondary framebuffer (eg. FBTFT).

Zaktualizowano 2019-03-13 03:03:40 +00:00

csdr is a command line tool to carry out DSP tasks for Software Defined Radio. It can be used to build simple signal processing flow graphs, right from the command line.

sdr

dsp

Zaktualizowano 2019-02-27 16:07:58 +00:00

v5 uBITX firmware, written for the Raduino/Arduino control of uBITX transceivers

Zaktualizowano 2019-02-06 06:24:08 +00:00

RestPi is a django restful project. It developed for remote controlling to Raspberry Pi. It has front-end for pin controlling. Front-end developed with angularjs.

raspberry-pi

gpio-pins

django-rest-framework

django

angularjs

Zaktualizowano 2019-02-03 13:29:11 +00:00

Web Based implementation of SquiggleDraw algorithm

svg

editor

webcam

squiggledraw-algorithm

plotter

Zaktualizowano 2019-01-29 19:26:05 +00:00

Firmware for embroidery machines and custom stepper motors control.

Zaktualizowano 2018-11-30 20:04:39 +00:00

Embroiderino is a test project which aims at providing all needed to turn an ordinary sewing machine into digital embroidery machine or at least to reuse any other embroidery machine with mainboard failure.

Zaktualizowano 2018-11-30 19:56:46 +00:00

This repository contains CAD design for small 3D printed plotter (f.e. embroidery)

Zaktualizowano 2018-11-06 02:34:01 +00:00

Pelican theme for solar powered version of lowtechmagazine.com

Zaktualizowano 2018-11-02 19:32:43 +00:00

ESP32-8266-Audio-Spectrum-Display

Zaktualizowano 2018-10-05 13:47:38 +00:00

MicroPython Waveshare e-Paper

Zaktualizowano 2018-08-07 16:30:53 +00:00

Pecan Pico 9 - A lightweight APRS tracker for balloons

Zaktualizowano 2018-08-06 20:32:21 +00:00

This project RadioDSP define a experimental open platform to build Real Time filtering and audio digital signal elaboration from a source audio signal in output from radio transceiver or receiver

Zaktualizowano 2018-07-22 21:06:43 +00:00

The aim of this project is to release a glider from a high altitude weather balloon and have the glider autonomously navigate back to a target landing spot where it can be recovered.

Zaktualizowano 2018-05-29 00:07:19 +00:00

v4 uBITX firmware, written for the Raduino/Arduino control of uBITX transceivers

Zaktualizowano 2018-05-23 04:36:07 +00:00

Driver and CUPS filter for Ricoh Aficio SP-112

Zaktualizowano 2018-04-30 22:47:30 +00:00

XYZ 3D printer NFC key calculator

Zaktualizowano 2018-03-13 21:15:49 +00:00

TRX with gps for telemetry

Zaktualizowano 2018-03-12 22:45:27 +00:00

Minimal WSPR beacon using Si5351Arduino library

Zaktualizowano 2018-01-17 18:16:54 +00:00

v3 uBITX firmware, written for the Raduino/Arduino control of uBITX transceigers

Zaktualizowano 2017-12-07 05:09:50 +00:00