sforkowany z mirror/meshtastic-firmware
23 wiersze
1.0 KiB
C
23 wiersze
1.0 KiB
C
#undef GPS_RX_PIN
|
|
#undef GPS_TX_PIN
|
|
#define GPS_RX_PIN 36
|
|
#define GPS_TX_PIN 13 // per @eugene
|
|
|
|
#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
|
#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
|
|
|
|
#define I2C_SDA 21 // I2C pins for this board
|
|
#define I2C_SCL 22
|
|
|
|
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
|
|
#define LED_PIN 25 // If defined we will blink this LED
|
|
#define BUTTON_PIN \
|
|
0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
|
|
// between this pin and ground
|
|
#define BUTTON_NEED_PULLUP
|
|
|
|
#define USE_RF95
|
|
#define LORA_DIO0 26 // a No connect on the SX1262 module
|
|
#define LORA_RESET 14
|
|
#define LORA_DIO1 33 // Must be manually wired: https://www.thethingsnetwork.org/forum/t/big-esp32-sx127x-topic-part-3/18436
|
|
#define LORA_DIO2 32 // Not really used
|