meshtastic-firmware/platformio.ini

128 wiersze
3.8 KiB
INI

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
default_envs = tbeam
[common]
; default to a US frequency range, change it as needed for your region and hardware (CN, JP, EU433, EU865)
hw_version = US
[env]
platform = espressif32
framework = arduino
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv
; note: we add src to our include search path so that lmic_project_config can override
; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc
build_flags = -Wno-missing-field-initializers -Isrc -Isrc/rf95 -Os -Wl,-Map,.pio/build/output.map -DAXP_DEBUG_PORT=Serial -DHW_VERSION_${common.hw_version}
; not needed included in ttgo-t-beam board file
; also to use PSRAM https://docs.platformio.org/en/latest/platforms/espressif32.html#external-ram-psram
; -DBOARD_HAS_PSRAM
; -mfix-esp32-psram-cache-issue
; -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
; leave this commented out to avoid breaking Windows
;upload_port = /dev/ttyUSB0
;monitor_port = /dev/ttyUSB0
; the default is esptool
; upload_protocol = esp-prog
monitor_speed = 115200
# debug_tool = esp-prog
# debug_port = /dev/ttyACM0
debug_tool = jlink
;upload_protocol = jlink
; debug_tool = olimex-arm-usb-ocd-h
; upload_protocol = olimex-arm-usb-ocd-h
;debug_init_cmds =
; monitor adapter_khz 10000
lib_deps =
https://github.com/meshtastic/esp8266-oled-ssd1306.git ; ESP8266_SSD1306
SPI
; 1260 ; OneButton - not used yet
1202 ; CRC32, explicitly needed because dependency is missing in the ble ota update lib
Wire ; explicitly needed here because the AXP202 library forgets to add it
https://github.com/meshtastic/arduino-fsm.git
https://github.com/meshtastic/SparkFun_Ublox_Arduino_Library.git
; Common settings for ESP targes, mixin with extends = esp32_base
[esp32_base]
src_filter =
${env.src_filter} -<bare/>
upload_speed = 921600
debug_init_break = tbreak setup
build_flags =
${env.build_flags} -Wall -Wextra
; The 1.0 release of the TBEAM board
[env:tbeam]
extends = esp32_base
board = ttgo-t-beam
lib_deps =
${env.lib_deps}
AXP202X_Library
build_flags =
${esp32_base.build_flags} -D TBEAM_V10
; The original TBEAM board without the AXP power chip and a few other changes
; Note: I've heard reports this didn't work. Disabled until someone with a 0.7 can test and debug.
;[env:tbeam0.7]
;extends = esp32_base
;board = ttgo-t-beam
;build_flags =
; ${esp32_base.build_flags} -D TBEAM_V07
[env:heltec]
;build_type = debug ; to make it possible to step through our jtag debugger
extends = esp32_base
board = heltec_wifi_lora_32_V2
[env:ttgo-lora32-v1]
extends = esp32_base
board = ttgo-lora32-v1
build_flags =
${esp32_base.build_flags} -D TTGO_LORA_V1
; note: the platformio definition for lora32-v2 seems stale, it is missing a pins_arduino.h file, therefore I don't think it works
[env:ttgo-lora32-v2]
extends = esp32_base
board = ttgo-lora32-v1
build_flags =
${esp32_base.build_flags} -D TTGO_LORA_V2
; This is a temporary build target to test turning off particular hardare bits in the build (to improve modularity)
[env:bare]
platform = nordicnrf52
board = nrf52840_dk_adafruit ; nicer than nrf52840_dk - more full gpio mappings
framework = arduino
debug_tool = jlink
build_flags =
${env.build_flags} -D BARE_BOARD -Wno-unused-variable -Isrc/bare
src_filter =
${env.src_filter} -<esp32/>
lib_ignore =
BluetoothOTA
lib_deps =
${env.lib_deps}
monitor_port = /dev/ttyACM1