meshtastic-firmware/variants/ppr/variant.h

159 wiersze
4.0 KiB
C

/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#pragma once
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
// This board does not have a 32khz crystal
// #define USE_LFXO // Board uses 32khz crystal for LF
#define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (46)
#define NUM_DIGITAL_PINS (46)
#define NUM_ANALOG_INPUTS (0)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define PIN_LED1 (0)
#define PIN_LED2 (1)
#define LED_BUILTIN PIN_LED1
#define LED_CONN PIN_LED2
#define LED_RED PIN_LED1
#define LED_GREEN PIN_LED2
// FIXME, bluefruit automatically blinks this led while connected. call AdafruitBluefruit::autoConnLed to change this.
#define LED_BLUE LED_GREEN
#define LED_STATE_ON 1 // State when LED is litted
/*
* Buttons
*/
#define PIN_BUTTON1 4 // center
#define PIN_BUTTON2 2
#define PIN_BUTTON3 3
#define PIN_BUTTON4 5
#define PIN_BUTTON5 6
/*
* Analog pins
*/
#define PIN_A0 (0xff)
#define PIN_A1 (0xff)
#define PIN_A2 (0xff)
#define PIN_A3 (0xff)
#define PIN_A4 (0xff)
#define PIN_A5 (0xff)
#define PIN_A6 (0xff)
#define PIN_A7 (0xff)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
static const uint8_t A4 = PIN_A4;
static const uint8_t A5 = PIN_A5;
static const uint8_t A6 = PIN_A6;
static const uint8_t A7 = PIN_A7;
#define ADC_RESOLUTION 14
// Other pins
#define PIN_AREF (0xff)
//#define PIN_NFC1 (9)
//#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
// GPS is on Serial1
#define PIN_SERIAL1_RX (8)
#define PIN_SERIAL1_TX (9)
// Connected to Jlink CDC
//#define PIN_SERIAL2_RX (8)
//#define PIN_SERIAL2_TX (6)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (15)
#define PIN_SPI_MOSI (13)
#define PIN_SPI_SCK (12)
// static const uint8_t SS = 44;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 2)
#define PIN_WIRE_SCL (32)
// CUSTOM GPIOs the SX1262
#define USE_SX1262
#define SX126X_CS (10)
#define SX126X_DIO1 (20)
#define SX1262_DIO2 (26)
#define SX126X_BUSY (31) // Supposed to be P0.18 but because of reworks, now on P0.31 (18)
#define SX126X_RESET (17)
// #define SX126X_ANT_SW (32 + 10)
#define SX126X_RXEN (22)
#define SX126X_TXEN (24)
#define SX126X_E22 // Indicates this SX1262 is inside of an ebyte E22 module and special config should be done for that
// ERC12864-10 LCD
#define ERC12864_CS (32 + 4)
#define ERC12864_RESET (32 + 6)
#define ERC12864_CD (32 + 9)
// L80 GPS
#define L80_PPS (28)
#define L80_RESET (29)
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/