sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność
6 306 Commity
8 Gałęzie
195 Tagi
44 MiB
Wykres commitów

321 Commity (master)

Autor SHA1 Wiadomość Data
code8buster 7475c8647c
2.5dB could be a more appropriate attenuation for heltec ADCs (#2511) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-05-26 06:16:40 -05:00
Ben Meadors 2728e86aab No longer are you extras, my friends 2023-05-24 07:08:22 -05:00
Thomas Göttgens 1dfa8f2d9e
RAK11310 (#2299) 
* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* fmt

* update toolkit and fmt

* Add built in LED pin

* Use arduino pins

* init SPI bus on right pins.

* Use SPI1 and control chip select manually

* Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source

* Remove manual CS; works when not using setCS()

* Remove whoopsie debug line

* we are not ARDUINO_AVR_NANO_EVERY any more

* fix rp2040 compilation

* fix RadioLibHAL

* Use new arduino-pico core

* Use cortex-m0plus for BSEC2 library

* Forgot RAK11310 target for BSEC2 library

* That branch was merged

* RAK11310 is working too

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
 2023-05-23 16:19:36 -05:00
code8buster 9878ff3836 Tryfix datatype errors 2023-05-16 21:46:55 +02:00
code8buster 3219ad33ef Add ADC channels to esp variants, plug code back in to make sure other archs work 2023-05-16 21:46:55 +02:00
code8buster d11bcda292 Implementing a calibrated ESP32 ADC reading 2023-05-16 21:46:55 +02:00
Ben Meadors f7e1f4cea6 Fix hydra (for real this time) 2023-05-11 19:56:55 -05:00
Ben Meadors 75504793e8 Skip setting dio2 as rf switch altogether if txen is defined 2023-05-11 06:52:27 -05:00
Thomas Göttgens 70dc13a998 use BSEC2 only 2023-05-10 14:14:48 +02:00
Thomas Göttgens 9841d49fb8
Merge branch 'master' into BSEC2 2023-05-10 13:31:46 +02:00
rcarteraz 0e15d6a5c2
Update Heltec WSL variant.h to add I2C definitions. (#2475) 2023-05-09 19:30:43 -05:00
Thomas Göttgens 6963e43e9f Platformio 6.1.7 doesn't like dots in env names any more. 2023-05-08 20:28:11 +02:00
Ben Meadors 09d48f659e
RAK14001 RGB LED support (#2464) 
* WIP

* WIP

* Moved it

* More random strobey behavior

* Guard to RAK4630 devices for now

* Oops

* Ship it
 2023-05-06 07:17:40 -05:00
Thomas Göttgens 10f41e376c use BSEC2 for ESP32-C3 2023-05-05 18:09:06 +02:00
Manuel Verch 7c9d0a022a fix AI C3 DevKit-M configuration 2023-05-05 09:39:22 +02:00
Ben Meadors a6385a522d
Disable TX/RX EN in favor of power EN over TX_EN (#2456) 
* Disable TX/RX EN in favor of power EN over TX_EN

* Oops
 2023-05-03 06:24:09 -05:00
Mark Trevor Birss a27d354364
Add board - BPI PicoW ESP32-S3 SX1262 (#2450) 
* Add files via upload

* Add files via upload
 2023-05-01 07:12:00 -05:00
Thomas Göttgens 10fac072bb move codec2 repo to org 2023-04-12 14:39:25 +02:00
Vladislav Osmanov 6bf538e26f `EXT_PWR_DETECT` pin to detect external power source for boards without the power management chip 2023-04-02 11:35:25 +02:00
Thomas Göttgens 82ba59765c trunk it baby 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 7930aa1635 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss c55751964e Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss b9b1cce6a5 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 044ef75fef Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 9f940139a0 Update platformio.ini 2023-03-29 13:41:45 +02:00
Mark Trevor Birss 790df42987 Add files via upload 2023-03-29 13:41:45 +02:00
Thomas Göttgens 2c259b8464 Add Power Restraint for 1280 PA Model 
Add Debug Print for all module parameters
Add RX/TX Switch to 1280
 2023-03-24 16:57:30 +01:00
Thomas Göttgens 75db8c2d2e the target starts up and works for a few seconds before crashing. Good enough for others to continue the work :-) 2023-03-21 16:24:24 +01:00
andrekir c9686d2f62 remove `PIN_EINK_EN` from RAK4631 variants 2023-03-12 19:29:12 +01:00
Andre K 634251834f fix rak4631_epaper PIN_EINK_EN 
revert 088ab106dd
 2023-03-12 19:29:12 +01:00
Ben Meadors e737a22120
Platform updates (#2340) 
* 6.1.0

* Update libs

* Update nrf52 while we're at it

* Remove temporary heltec platform packages

* Update install scripts to flash s3 ota partition bin
 2023-03-09 12:45:38 -06:00
A. Rager e6d69e2b67
Refactor i2cScan.h To Handle 2 Bus (#2337) 
* Break i2cScan out into a set of classes for scanning i2c

* refactor i2cscan addresses to be structs that allow addressing by port + address

* build whoopsies

* trunk fmt

* trunk fmt

* lost some build fixes from the merge

* more cleaning for build safety, RTC behavior
 2023-03-08 21:13:46 -06:00
Thomas Göttgens 267db05d69 - G1 Explorer use correct display controller 
- adhere UA font in modules
 2023-03-08 17:12:25 +01:00
Thomas Göttgens 4a0dfb5401 T3S3-1.1 SX1276 config (and cosmetic change for SX1280 in PA mode) 2023-03-04 18:39:19 +01:00
A. Rager 214feb1f21
Add Hardware: BetaFPV 900 Nano TX (#2249) 
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-03-01 08:36:25 -06:00
Manuel 9008c75517
Fixed: Tlora-t3s3-v1 SX1262 firmware reboots continuously (#2308) (#2315) 2023-02-28 07:45:10 -06:00
GUVWAF 95bbcd2cb7
Use LORA_DIO1 as RadioLib GPIO for SX127x chips (#2290) 
* When channel is active, first try receiving that packet
Afterwards we'll try transmitting again

* Remove setStandby in startSend
Already done in isChannelActive()

* Set LORA_DIO1 as RadioLib GPIO for SX127x

* LORA_DIO1 for Heltec v1, overlaps with GPS_TX
Set to RADIOLIB_NC for now

* If receive was not successful, startReceive doesn't trigger the interrupt
So we have to go back to transmitting anyway

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
 2023-02-20 07:40:44 -06:00
neil b33632f21a 'nano-g1-explorer' 2023-02-18 04:49:37 +08:00
Ben Meadors 09f2ea8938 Portduino isn't extra. It's extra special 2023-02-10 07:47:43 -06:00
Thomas Göttgens 83e309f3bf label boards as secondary to split the core firmware archive by support level. 
Ref: https://docs.platformio.org/en/latest/scripting/examples/platformio_ini_custom_options.html
 2023-02-10 01:35:25 +01:00
GUVWAF a5b99ee5d5 Try other location 2023-02-07 20:05:40 +01:00
GUVWAF 4a0c341438 Make Portduino build again 2023-02-07 19:40:15 +01:00
Ben Meadors 9522d4d2f5 Make a pie? 2023-02-07 07:17:32 -06:00
Ben Meadors cb3d5a5748 Comment about external PA module boards 2023-01-25 15:48:42 -06:00
Ben Meadors f1fd41a378 Add to Eink target as well 2023-01-25 11:48:11 -06:00
Ben Meadors ca91447c0e For science! 2023-01-25 10:10:09 -06:00
Ben Meadors 2c1b7840c5 Make this pr great again 2023-01-23 09:22:40 +01:00
Thomas Göttgens e9acf413fb After thoroughly reading schematics and documentation, i conclude that this is theoretically the right definition for this hookup. 2023-01-23 09:22:40 +01:00
Ben Meadors 266c61065d I swear I did this before you butthole 2023-01-21 19:51:24 -06:00
Ben Meadors e2e7658789 w/e 2023-01-21 19:24:33 -06:00