sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność

update project name

1.2-legacy
geeksville 2020-04-28 20:47:20 -07:00
rodzic 7ee2643e9a
commit f1ec95f49b
1 zmienionych plików z 3 dodań i 3 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

6
README.md
Wyświetl plik

@ -1,4 +1,4 @@
# Meshtastic-esp32 # Meshtastic-device
This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project. This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project.
@ -35,8 +35,8 @@ Please post comments on our [group chat](https://meshtastic.discourse.group/) if
1. Download and unzip the latest Meshtastic firmware [release](https://github.com/meshtastic/Meshtastic-esp32/releases). 1. Download and unzip the latest Meshtastic firmware [release](https://github.com/meshtastic/Meshtastic-esp32/releases).
2. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher/releases) (either x86-32bit Windows or x64-64 bit Windows). 2. Download [ESPHome Flasher](https://github.com/esphome/esphome-flasher/releases) (either x86-32bit Windows or x64-64 bit Windows).
3. Connect your radio to your USB port and open ESPHome Flasher. 3. Connect your radio to your USB port and open ESPHome Flasher.
4. If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”. 4. If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”.
5. If there is an error, download the drivers [here](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers), then unzip and run the Installer application. 5. If there is an error, download the drivers [here](https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers), then unzip and run the Installer application.
6. In ESPHome Flasher, refresh the serial ports and select your board. 6. In ESPHome Flasher, refresh the serial ports and select your board.
7. Browse to the previously downloaded firmware and select the correct firmware based on the board type, country and frequency. 7. Browse to the previously downloaded firmware and select the correct firmware based on the board type, country and frequency.
8. Select Flash ESP. 8. Select Flash ESP.