sp9unb
/
meshtastic-firmware
sforkowany z mirror/meshtastic-firmware
1
0
Forkuj 0
Kod Zgłoszenia Oczekujące zmiany Packages Projekty Wydania Wiki Aktywność

Merge pull request #1676 from lewisxhe/master 

Add tbeam esp32s3 version support, replace AXP202X_Library with XPowersLib.
raytac-diy
Thomas Göttgens 2022-09-09 22:01:20 +02:00 zatwierdzone przez GitHub
rodzic 99de0a76a5 ff88900982
commit e375a8460b
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
20 zmienionych plików z 551 dodań i 154 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

48
boards/tbeam-s3-core.json 100644
Wyświetl plik

@ -0,0 +1,48 @@
{
"build": {
"arduino":{
"ldscript": "esp32s3_out.ld"
},
"core": "esp32",
"extra_flags": [
"-DBOARD_HAS_PSRAM",
"-DLILYGO_TBEAM_S3_CORE",
"-DARDUINO_USB_CDC_ON_BOOT=1",
"-DARDUINO_USB_DFU_ON_BOOT=1",
"-DARDUINO_USB_MSC_ON_BOOT=1",
"-DARDUINO_USB_MODE=1",
"-DARDUINO_RUNNING_CORE=1",
"-DARDUINO_EVENT_RUNNING_CORE=1"
],
"f_cpu": "240000000L",
"f_flash": "80000000L",
"flash_mode": "dio",
"hwids": [
[
"0X303A",
"0x1001"
]
],
"mcu": "esp32s3",
"variant": "tbeam-s3-core"
},
"connectivity": [
"wifi"
],
"debug": {
"openocd_target": "esp32s3.cfg"
},
"frameworks": [
"arduino"
],
"name": "LilyGo TBeam-S3-Core",
"upload": {
"flash_size": "8MB",
"maximum_ram_size": 327680,
"maximum_size": 8388608,
"require_upload_port": true,
"speed": 921600
},
"url": "http://www.lilygo.cn/",
"vendor": "LilyGo"
}

58
platformio.ini
Wyświetl plik

@ -3,6 +3,7 @@
[platformio]
default_envs = tbeam
;default_envs = tbeam-s3-core
;default_envs = tbeam0.7
;default_envs = heltec-v1
;default_envs = heltec-v2.0
@ -13,7 +14,7 @@ default_envs = tbeam
;default_envs = tlora-v2
;default_envs = tlora-v2-1-1.6
;default_envs = lora-relay-v1 # nrf board
;default_envs = t-echo
; default_envs = t-echo
;default_envs = nrf52840dk-geeksville
;default_envs = native # lora-relay-v1 # nrf52840dk-geeksville # linux # or if you'd like to change the default to something like lora-relay-v1 put that here
;default_envs = nano-g1
@ -110,8 +111,8 @@ lib_deps =
h2zero/NimBLE-Arduino@1.4.0
arduino-libraries/NTPClient@^3.1.0
lorol/LittleFS_esp32@^1.0.6
https://github.com/meshtastic/AXP202X_Library.git#8404abb6d4b486748636bc6ad72d2a47baaf5460
https://github.com/lewisxhe/XPowersLib.git
lib_ignore =
segger_rtt
ESP32 BLE Arduino
@ -203,3 +204,54 @@ lib_deps =
https://github.com/kokke/tiny-AES-c.git
lib_ignore =
mathertel/OneButton@^2.0.3
[esp32s3_base]
extends = arduino_base
platform = espressif32
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2040>
upload_speed = 961200
monitor_speed = 115200
debug_init_break = tbreak setup
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_flags =
${arduino_base.build_flags}
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DAXP_DEBUG_PORT=Serial
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
; https://github.com/meshtastic/esp32_https_server.git
; PR has been submitted and can be deleted after merging ,https://github.com/meshtastic/esp32_https_server/pull/1
https://github.com/lewisxhe/esp32_https_server.git
h2zero/NimBLE-Arduino@1.4.0
arduino-libraries/NTPClient@^3.1.0
https://github.com/lewisxhe/XPowersLib.git
lib_ignore =
segger_rtt
ESP32 BLE Arduino
platform_packages =
framework-arduinoespressif32@ 3.20004.220825
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv

4
src/ButtonThread.h
Wyświetl plik

@ -128,8 +128,8 @@ class ButtonThread : public concurrency::OSThread
#endif
// If user button is held down for 5 seconds, shutdown the device.
if ((millis() - longPressTime > 5 * 1000) && (longPressTime > 0)) {
#ifdef HAS_AXP192
if (axp192_found == true) {
#ifdef HAS_PMU
if (pmu_found == true) {
setLed(false);
power->shutdown();
}

7
src/FSCommon.h
Wyświetl plik

@ -23,9 +23,16 @@
#endif
#if defined(ARCH_ESP32)
#if CONFIG_IDF_TARGET_ESP32S3
#include <LittleFS.h> //esp32s3 uses the framework's built-in LittleFS
#define FSCom LittleFS
#else
// ESP32 version
#include "LITTLEFS.h"
#define FSCom LITTLEFS
#endif
#define FSBegin() FSCom.begin(true)
#define FILE_O_WRITE "w"
#define FILE_O_READ "r"

367
src/Power.cpp
Wyświetl plik

@ -7,10 +7,11 @@
#include "utils.h"
#include "buzz/buzz.h"
#ifdef HAS_AXP192
#include "axp20x.h"
AXP20X_Class axp;
#ifdef HAS_PMU
#include "XPowersLibInterface.hpp"
#include "XPowersAXP2101.tpp"
#include "XPowersAXP192.tpp"
XPowersLibInterface *PMU = NULL;
#else
// Copy of the base class defined in axp20x.h.
// I'd rather not inlude axp20x.h as it brings Wire dependency.
@ -20,20 +21,20 @@ class HasBatteryLevel
/**
* Battery state of charge, from 0 to 100 or -1 for unknown
*/
virtual int getBattPercentage() { return -1; }
virtual int getBatteryPercent() { return -1; }
/**
* The raw voltage of the battery or NAN if unknown
*/
virtual float getBattVoltage() { return NAN; }
virtual uint16_t getBattVoltage() { return 0; }
/**
* return true if there is a battery installed in this unit
*/
virtual bool isBatteryConnect() { return false; }
virtual bool isVBUSPlug() { return false; }
virtual bool isChargeing() { return false; }
virtual bool isVbusIn() { return false; }
virtual bool isCharging() { return false; }
};
#endif
@ -75,7 +76,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
*
* FIXME - use a lipo lookup table, the current % full is super wrong
*/
virtual int getBattPercentage() override
virtual int getBatteryPercent() override
{
float v = getBattVoltage();
@ -94,7 +95,7 @@ class AnalogBatteryLevel : public HasBatteryLevel
/**
* The raw voltage of the batteryin millivolts or NAN if unknown
*/
virtual float getBattVoltage() override
virtual uint16_t getBattVoltage() override
{
#ifndef ADC_MULTIPLIER
@ -130,27 +131,27 @@ class AnalogBatteryLevel : public HasBatteryLevel
#endif
// DEBUG_MSG("battery gpio %d raw val=%u scaled=%u\n", BATTERY_PIN, raw, (uint32_t)(scaled));
last_read_value = scaled;
return scaled;
return scaled * 1000;
} else {
return last_read_value;
}
#else
return NAN;
return 0;
#endif
}
/**
* return true if there is a battery installed in this unit
*/
virtual bool isBatteryConnect() override { return getBattPercentage() != -1; }
virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; }
/// If we see a battery voltage higher than physics allows - assume charger is pumping
/// in power
virtual bool isVBUSPlug() override { return getBattVoltage() > chargingVolt; }
virtual bool isVbusIn() override { return getBattVoltage() > chargingVolt; }
/// Assume charging if we have a battery and external power is connected.
/// we can't be smart enough to say 'full'?
virtual bool isChargeing() override { return isBatteryConnect() && isVBUSPlug(); }
virtual bool isCharging() override { return isBatteryConnect() && isVbusIn(); }
private:
/// If we see a battery voltage higher than physics allows - assume charger is pumping
@ -219,7 +220,7 @@ bool Power::analogInit()
bool Power::setup()
{
bool found = axp192Init();
bool found = axpChipInit();
if (!found) {
found = analogInit();
@ -232,10 +233,14 @@ bool Power::setup()
void Power::shutdown()
{
#ifdef HAS_AXP192
#ifdef HAS_PMU
DEBUG_MSG("Shutting down\n");
axp.setChgLEDMode(AXP20X_LED_OFF);
axp.shutdown();
if(PMU){
PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
PMU->shutdown();
}
#elif defined(ARCH_NRF52)
playBeep();
ledOff(PIN_LED1);
@ -256,8 +261,8 @@ void Power::readPowerStatus()
if (hasBattery) {
batteryVoltageMv = batteryLevel->getBattVoltage();
// If the AXP192 returns a valid battery percentage, use it
if (batteryLevel->getBattPercentage() >= 0) {
batteryChargePercent = batteryLevel->getBattPercentage();
if (batteryLevel->getBatteryPercent() >= 0) {
batteryChargePercent = batteryLevel->getBatteryPercent();
} else {
// If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error
// In that case, we compute an estimate of the charge percent based on maximum and minimum voltages defined in
@ -270,8 +275,8 @@ void Power::readPowerStatus()
// Notify any status instances that are observing us
const PowerStatus powerStatus2 =
PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVBUSPlug() ? OptTrue : OptFalse,
batteryLevel->isChargeing() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
PowerStatus(hasBattery ? OptTrue : OptFalse, batteryLevel->isVbusIn() ? OptTrue : OptFalse,
batteryLevel->isCharging() ? OptTrue : OptFalse, batteryVoltageMv, batteryChargePercent);
DEBUG_MSG("Battery: usbPower=%d, isCharging=%d, batMv=%d, batPct=%d\n", powerStatus2.getHasUSB(),
powerStatus2.getIsCharging(), powerStatus2.getBatteryVoltageMv(), powerStatus2.getBatteryChargePercent());
newStatus.notifyObservers(&powerStatus2);
@ -304,41 +309,46 @@ int32_t Power::runOnce()
{
readPowerStatus();
#ifdef HAS_AXP192
#ifdef HAS_PMU
// WE no longer use the IRQ line to wake the CPU (due to false wakes from sleep), but we do poll
// the IRQ status by reading the registers over I2C
axp.readIRQ();
if(PMU){
if (axp.isVbusRemoveIRQ()) {
DEBUG_MSG("USB unplugged\n");
powerFSM.trigger(EVENT_POWER_DISCONNECTED);
}
if (axp.isVbusPlugInIRQ()) {
DEBUG_MSG("USB plugged In\n");
powerFSM.trigger(EVENT_POWER_CONNECTED);
}
/*
Other things we could check if we cared...
PMU->getIrqStatus();
if (axp.isChargingIRQ()) {
DEBUG_MSG("Battery start charging\n");
if(PMU->isVbusRemoveIrq()){
DEBUG_MSG("USB unplugged\n");
powerFSM.trigger(EVENT_POWER_DISCONNECTED);
}
if (PMU->isVbusInsertIrq()) {
DEBUG_MSG("USB plugged In\n");
powerFSM.trigger(EVENT_POWER_CONNECTED);
}
/*
Other things we could check if we cared...
if (PMU->isBatChagerStartIrq()) {
DEBUG_MSG("Battery start charging\n");
}
if (PMU->isBatChagerDoneIrq()) {
DEBUG_MSG("Battery fully charged\n");
}
if (PMU->isBatInsertIrq()) {
DEBUG_MSG("Battery inserted\n");
}
if (PMU->isBatRemoveIrq()) {
DEBUG_MSG("Battery removed\n");
}
if (PMU->isPekeyShortPressIrq()) {
DEBUG_MSG("PEK short button press\n");
}
*/
PMU->clearIrqStatus();
}
if (axp.isChargingDoneIRQ()) {
DEBUG_MSG("Battery fully charged\n");
}
if (axp.isBattPlugInIRQ()) {
DEBUG_MSG("Battery inserted\n");
}
if (axp.isBattRemoveIRQ()) {
DEBUG_MSG("Battery removed\n");
}
if (axp.isPEKShortPressIRQ()) {
DEBUG_MSG("PEK short button press\n");
}
*/
axp.clearIRQ();
#endif
// Only read once every 20 seconds once the power status for the app has been initialized
return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : RUN_SAME;
}
@ -351,77 +361,204 @@ int32_t Power::runOnce()
share the same i2c bus, instead use ssd1306 sleep mode DCDC2 -> unused DCDC3 0.7-3.5V @ 700mA max -> ESP32 (keep this on!) LDO1
30mA -> charges GPS backup battery // charges the tiny J13 battery by the GPS to power the GPS ram (for a couple of days), can
not be turned off LDO2 200mA -> LORA LDO3 200mA -> GPS
*
*/
bool Power::axp192Init()
bool Power::axpChipInit()
{
#ifdef HAS_AXP192
if (axp192_found) {
if (!axp.begin(Wire, AXP192_SLAVE_ADDRESS)) {
batteryLevel = &axp;
DEBUG_MSG("AXP192 Begin PASS\n");
#ifdef HAS_PMU
// axp.setChgLEDMode(LED_BLINK_4HZ);
DEBUG_MSG("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("----------------------------------------\n");
axp.setPowerOutPut(AXP192_LDO2, AXP202_ON); // LORA radio
// axp.setPowerOutPut(AXP192_LDO3, AXP202_ON); // GPS main power - now turned on in setGpsPower
axp.setPowerOutPut(AXP192_DCDC2, AXP202_ON);
axp.setPowerOutPut(AXP192_EXTEN, AXP202_ON);
axp.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
axp.setDCDC1Voltage(3300); // for the OLED power
DEBUG_MSG("DCDC1: %s\n", axp.isDCDC1Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("DCDC2: %s\n", axp.isDCDC2Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("LDO2: %s\n", axp.isLDO2Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("LDO3: %s\n", axp.isLDO3Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
DEBUG_MSG("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
// this was the previous 'Unset' default.
axp.setChargeControlCur(AXP1XX_CHARGE_CUR_450MA);
#if 0
// Not connected
//val = 0xfc;
//axp._writeByte(AXP202_VHTF_CHGSET, 1, &val); // Set temperature protection
//not used
//val = 0x46;
//axp._writeByte(AXP202_OFF_CTL, 1, &val); // enable bat detection
#endif
axp.debugCharging();
#ifdef PMU_IRQ
pinMode(PMU_IRQ, INPUT);
attachInterrupt(
PMU_IRQ, [] { pmu_irq = true; }, FALLING);
axp.adc1Enable(AXP202_BATT_CUR_ADC1, 1);
// we do not look for AXP202_CHARGING_FINISHED_IRQ & AXP202_CHARGING_IRQ because it occurs repeatedly while there is
// no battery also it could cause inadvertent waking from light sleep just because the battery filled
// we don't look for AXP202_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
// we don't look at AXP202_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
axp.enableIRQ(AXP202_BATT_CONNECT_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_PEK_SHORTPRESS_IRQ, 1);
axp.clearIRQ();
#endif
readPowerStatus();
if (!PMU) {
PMU = new XPowersAXP2101(Wire, I2C_SDA, I2C_SCL);
if (!PMU->init()) {
DEBUG_MSG("Warning: Failed to find AXP2101 power management\n");
delete PMU;
PMU = NULL;
} else {
DEBUG_MSG("AXP192 Begin FAIL\n");
DEBUG_MSG("AXP2101 PMU init succeeded, using AXP2101 PMU\n");
}
} else {
DEBUG_MSG("AXP192 not found\n");
}
return axp192_found;
if (!PMU) {
PMU = new XPowersAXP192(Wire, I2C_SDA, I2C_SCL);
if (!PMU->init()) {
DEBUG_MSG("Warning: Failed to find AXP192 power management\n");
delete PMU;
PMU = NULL;
} else {
DEBUG_MSG("AXP192 PMU init succeeded, using AXP192 PMU\n");
}
}
if (!PMU) {
/*
* In XPowersLib, if the XPowersAXPxxx object is released, Wire.end() will be called at the same time.
* In order not to affect other devices, if the initialization of the PMU fails, Wire needs to be re-initialized once,
* if there are multiple devices sharing the bus.
* * */
Wire.begin(I2C_SDA, I2C_SCL);
return false;
}
batteryLevel = PMU;
if (PMU->getChipModel() == XPOWERS_AXP192) {
// lora radio power channel
PMU->setPowerChannelVoltage(XPOWERS_LDO2, 3300);
PMU->enablePowerOutput(XPOWERS_LDO2);
// oled module power channel,
// disable it will cause abnormal communication between boot and AXP power supply,
// do not turn it off
PMU->setPowerChannelVoltage(XPOWERS_DCDC1, 3300);
// enable oled power
PMU->enablePowerOutput(XPOWERS_DCDC1);
// gnss module power channel - now turned on in setGpsPower
PMU->setPowerChannelVoltage(XPOWERS_LDO3, 3300);
// PMU->enablePowerOutput(XPOWERS_LDO3);
//protected oled power source
PMU->setProtectedChannel(XPOWERS_DCDC1);
//protected esp32 power source
PMU->setProtectedChannel(XPOWERS_DCDC3);
//disable not use channel
PMU->disablePowerOutput(XPOWERS_DCDC2);
//disable all axp chip interrupt
PMU->disableIRQ(XPOWERS_AXP192_ALL_IRQ);
// Set constant current charging current
PMU->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_450MA);
} else if (PMU->getChipModel() == XPOWERS_AXP2101) {
// t-beam s3 core
// gnss module power channel - now turned on in setGpsPower
// PMU->setPowerChannelVoltage(XPOWERS_ALDO4, 3300);
// PMU->enablePowerOutput(XPOWERS_ALDO4);
// lora radio power channel
PMU->setPowerChannelVoltage(XPOWERS_ALDO3, 3300);
PMU->enablePowerOutput(XPOWERS_ALDO3);
// m.2 interface
PMU->setPowerChannelVoltage(XPOWERS_DCDC3, 3300);
PMU->enablePowerOutput(XPOWERS_DCDC3);
// PMU->setPowerChannelVoltage(XPOWERS_DCDC4, 3300);
// PMU->enablePowerOutput(XPOWERS_DCDC4);
//not use channel
PMU->disablePowerOutput(XPOWERS_DCDC2); //not elicited
PMU->disablePowerOutput(XPOWERS_DCDC5); //not elicited
PMU->disablePowerOutput(XPOWERS_DLDO1); //Invalid power channel, it does not exist
PMU->disablePowerOutput(XPOWERS_DLDO2); //Invalid power channel, it does not exist
PMU->disablePowerOutput(XPOWERS_VBACKUP);
//disable all axp chip interrupt
PMU->disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
//Set the constant current charging current of AXP2101, temporarily use 500mA by default
PMU->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_500MA);
}
PMU->clearIrqStatus();
// TBeam1.1 /T-Beam S3-Core has no external TS detection,
// it needs to be disabled, otherwise it will cause abnormal charging
PMU->disableTSPinMeasure();
// PMU->enableSystemVoltageMeasure();
PMU->enableVbusVoltageMeasure();
PMU->enableBattVoltageMeasure();
DEBUG_MSG("=======================================================================\n");
if (PMU->isChannelAvailable(XPOWERS_DCDC1)) {
DEBUG_MSG("DC1 : %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC1) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC1));
}
if (PMU->isChannelAvailable(XPOWERS_DCDC2)) {
DEBUG_MSG("DC2 : %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC2));
}
if (PMU->isChannelAvailable(XPOWERS_DCDC3)) {
DEBUG_MSG("DC3 : %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC3) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC3));
}
if (PMU->isChannelAvailable(XPOWERS_DCDC4)) {
DEBUG_MSG("DC4 : %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_DCDC4) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_DCDC4));
}
if (PMU->isChannelAvailable(XPOWERS_LDO2)) {
DEBUG_MSG("LDO2 : %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_LDO2));
}
if (PMU->isChannelAvailable(XPOWERS_LDO3)) {
DEBUG_MSG("LDO3 : %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_LDO3) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_LDO3));
}
if (PMU->isChannelAvailable(XPOWERS_ALDO1)) {
DEBUG_MSG("ALDO1: %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO1) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO1));
}
if (PMU->isChannelAvailable(XPOWERS_ALDO2)) {
DEBUG_MSG("ALDO2: %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO2));
}
if (PMU->isChannelAvailable(XPOWERS_ALDO3)) {
DEBUG_MSG("ALDO3: %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO3) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO3));
}
if (PMU->isChannelAvailable(XPOWERS_ALDO4)) {
DEBUG_MSG("ALDO4: %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_ALDO4) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_ALDO4));
}
if (PMU->isChannelAvailable(XPOWERS_BLDO1)) {
DEBUG_MSG("BLDO1: %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO1) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_BLDO1));
}
if (PMU->isChannelAvailable(XPOWERS_BLDO2)) {
DEBUG_MSG("BLDO2: %s Voltage:%u mV \n", PMU->isPowerChannelEnable(XPOWERS_BLDO2) ? "+" : "-", PMU->getPowerChannelVoltage(XPOWERS_BLDO2));
}
DEBUG_MSG("=======================================================================\n");
//Set up the charging voltage, AXP2101/AXP192 4.2V gear is the same
// XPOWERS_AXP192_CHG_VOL_4V2 = XPOWERS_AXP2101_CHG_VOL_4V2
PMU->setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
// Set PMU shutdown voltage at 2.6V to maximize battery utilization
PMU->setSysPowerDownVoltage(2600);
#ifdef PMU_IRQ
uint64_t pmuIrqMask = 0;
if (PMU->getChipModel() == XPOWERS_AXP192) {
pmuIrqMask = XPOWERS_AXP192_VBUS_INSERT_IRQ | XPOWERS_AXP192_BAT_INSERT_IRQ | XPOWERS_AXP192_PKEY_SHORT_IRQ;
} else if (PMU->getChipModel() == XPOWERS_AXP2101) {
pmuIrqMask = XPOWERS_AXP2101_VBUS_INSERT_IRQ | XPOWERS_AXP2101_BAT_INSERT_IRQ | XPOWERS_AXP2101_PKEY_SHORT_IRQ;
}
pinMode(PMU_IRQ, INPUT);
attachInterrupt(
PMU_IRQ, [] { pmu_irq = true; }, FALLING);
// we do not look for AXPXXX_CHARGING_FINISHED_IRQ & AXPXXX_CHARGING_IRQ because it occurs repeatedly while there is
// no battery also it could cause inadvertent waking from light sleep just because the battery filled
// we don't look for AXPXXX_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
// we don't look at AXPXXX_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
PMU->enableIRQ(pmuIrqMask);
PMU->clearIrqStatus();
#endif /*PMU_IRQ*/
readPowerStatus();
pmu_found = true;
return pmu_found;
#else
return false;
#endif

2
src/PowerFSM.cpp
Wyświetl plik

@ -12,7 +12,7 @@
static bool isPowered()
{
// Circumvent the battery sensing logic and assumes constant power if no battery pin or power mgmt IC
#if !defined(BATTERY_PIN) && !defined(HAS_AXP192)
#if !defined(BATTERY_PIN) && !defined(HAS_AXP192) && !defined(HAS_AXP2101)
return true;
#endif

13
src/detect/i2cScan.h
Wyświetl plik

@ -3,8 +3,9 @@
#include <Wire.h>
#include "mesh/generated/telemetry.pb.h"
#ifdef HAS_AXP192
#include "axp20x.h"
// AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp
#ifndef XPOWERS_AXP192_AXP2101_ADDRESS
#define XPOWERS_AXP192_AXP2101_ADDRESS 0x34
#endif
#if HAS_WIRE
@ -114,10 +115,10 @@ void scanI2Cdevice(void)
screen_found = addr;
DEBUG_MSG("st7567 display found\n");
}
#ifdef HAS_AXP192
if (addr == AXP192_SLAVE_ADDRESS) {
axp192_found = true;
DEBUG_MSG("axp192 PMU found\n");
#ifdef HAS_PMU
if (addr == XPOWERS_AXP192_AXP2101_ADDRESS) {
pmu_found = true;
DEBUG_MSG("axp192/axp2101 PMU found\n");
}
#endif
if (addr == BME_ADDR || addr == BME_ADDR_ALTERNATE) {

27
src/gps/GPS.cpp
Wyświetl plik

@ -64,15 +64,40 @@ bool GPS::setupGPS()
if (_serial_gps && !didSerialInit) {
didSerialInit = true;
#if CONFIG_IDF_TARGET_ESP32S3
// In esp32s3 framework, setRxBufferSize needs to be initialized before Serial
_serial_gps->setRxBufferSize(2048); // the default is 256
#endif
// ESP32 has a special set of parameters vs other arduino ports
#if defined(GPS_RX_PIN) && defined(ARCH_ESP32)
_serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, GPS_RX_PIN, GPS_TX_PIN);
#else
_serial_gps->begin(GPS_BAUDRATE);
#endif
#ifdef ARCH_ESP32
#if CONFIG_IDF_TARGET_ESP32
_serial_gps->setRxBufferSize(2048); // the default is 256
#endif
#ifdef LILYGO_TBEAM_S3_CORE
/*
* t-beam-s3-core uses the same L76K GNSS module as t-echo.
* Unlike t-echo, L76K uses 9600 baud rate for communication by default.
* */
_serial_gps->begin(9600);
delay(250);
// Initialize the L76K Chip, use GPS + GLONASS
_serial_gps->write("$PCAS04,5*1C\r\n");
delay(250);
// only ask for RMC and GGA
_serial_gps->write("$PCAS03,1,0,0,0,1,0,0,0,0,0,,,0,0*02\r\n");
delay(250);
// Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
_serial_gps->write("$PCAS11,3*1E\r\n");
delay(250);
#endif
#ifdef TTGO_T_ECHO
// Switch to 9600 baud, then close and reopen port
_serial_gps->end();

2
src/input/kbI2cBase.cpp
Wyświetl plik

@ -2,6 +2,8 @@
#include "configuration.h"
#include <Wire.h>
extern uint8_t cardkb_found;
KbI2cBase::KbI2cBase(const char *name) : concurrency::OSThread(name)
{
this->_originName = name;

6
src/main.cpp
Wyświetl plik

@ -84,7 +84,7 @@ bool eink_found = true;
uint32_t serialSinceMsec;
bool axp192_found;
bool pmu_found;
// Array map of sensor types (as array index) and i2c address as value we'll find in the i2c scan
uint8_t nodeTelemetrySensorsMap[7] = { 0, 0, 0, 0, 0, 0, 0 };
@ -301,8 +301,8 @@ void setup()
setupModules();
// Do this after service.init (because that clears error_code)
#ifdef HAS_AXP192
if (!axp192_found)
#ifdef HAS_PMU
if (!pmu_found)
RECORD_CRITICALERROR(CriticalErrorCode_NO_AXP192); // Record a hardware fault for missing hardware
#endif

2
src/main.h
Wyświetl plik

@ -15,7 +15,7 @@ extern uint8_t faceskb_found;
extern uint8_t rtc_found;
extern bool eink_found;
extern bool axp192_found;
extern bool pmu_found;
extern bool isCharging;
extern bool isUSBPowered;

15
src/mesh/http/WiFiAPClient.cpp
Wyświetl plik

@ -238,8 +238,10 @@ bool initWifi(bool forceSoftAP)
WiFi.softAPConfig(apIP, apIP, IPAddress(255, 255, 255, 0));
DEBUG_MSG("MY IP AP ADDRESS: %s\n", WiFi.softAPIP().toString().c_str());
#if !CONFIG_IDF_TARGET_ESP32S3
// This is needed to improve performance.
esp_wifi_set_ps(WIFI_PS_NONE); // Disable radio power saving
#endif
dnsServer.start(53, "*", apIP);
@ -252,14 +254,19 @@ bool initWifi(bool forceSoftAP)
WiFi.setHostname(ourHost);
WiFi.onEvent(WiFiEvent);
#if !CONFIG_IDF_TARGET_ESP32S3
// This is needed to improve performance.
esp_wifi_set_ps(WIFI_PS_NONE); // Disable radio power saving
#endif
WiFi.onEvent(
[](WiFiEvent_t event, WiFiEventInfo_t info) {
Serial.print("\nWiFi lost connection. Reason: ");
#if CONFIG_IDF_TARGET_ESP32S3
Serial.println(info.wifi_sta_disconnected.reason);
wifiDisconnectReason = info.wifi_sta_disconnected.reason;
#else
Serial.println(info.disconnected.reason);
/*
If we are disconnected from the AP for some reason,
save the error code.
@ -268,8 +275,14 @@ bool initWifi(bool forceSoftAP)
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/wifi.html#wi-fi-reason-code
*/
wifiDisconnectReason = info.disconnected.reason;
#endif
},
#if CONFIG_IDF_TARGET_ESP32S3
WiFiEvent_t::ARDUINO_EVENT_WIFI_STA_DISCONNECTED);
#else
WiFiEvent_t::SYSTEM_EVENT_STA_DISCONNECTED);
#endif
DEBUG_MSG("JOINING WIFI soon: ssid=%s\n", wifiName);
wifiReconnect = new Periodic("WifiConnect", reconnectWiFi);

8
src/platform/esp32/ESP32CryptoEngine.cpp
Wyświetl plik

@ -1,16 +1,16 @@
#include "CryptoEngine.h"
#include "configuration.h"
#if CONFIG_IDF_TARGET_ESP32S3
#include "mbedtls/aes.h"
#else
#include "crypto/includes.h"
#include "crypto/common.h"
// #include "esp_system.h"
#include "crypto/aes.h"
#include "crypto/aes_wrap.h"
#include "mbedtls/aes.h"
#endif
class ESP32CryptoEngine : public CryptoEngine

5
src/platform/esp32/architecture.h
Wyświetl plik

@ -34,6 +34,9 @@
#define HAS_RTC 1
#endif
#if defined(HAS_AXP192) || defined(HAS_AXP2101)
#define HAS_PMU
#endif
//
// set HW_VENDOR
//
@ -44,6 +47,8 @@
#define HW_VENDOR HardwareModel_TBEAM
#elif defined(TBEAM_V07)
#define HW_VENDOR HardwareModel_TBEAM_V0P7
#elif defined(LILYGO_TBEAM_S3_CORE)
#define HW_VENDOR HardwareModel_LILYGO_TBEAM_S3_CORE
#elif defined(DIY_V1)
#define HW_VENDOR HardwareModel_DIY_V1
#elif defined(RAK_11200)

4
src/power.h
Wyświetl plik

@ -32,8 +32,8 @@ class Power : private concurrency::OSThread
protected:
meshtastic::PowerStatus *statusHandler;
/// Setup a axp192, return true if found
bool axp192Init();
/// Setup a xpowers chip axp192/axp2101, return true if found
bool axpChipInit();
/// Setup a simple ADC input based battery sensor
bool analogInit();

4
src/shutdown.h
Wyświetl plik

@ -35,8 +35,8 @@ void powerCommandsCheck()
if (shutdownAtMsec && millis() > shutdownAtMsec) {
DEBUG_MSG("Shutting down from admin command\n");
#ifdef HAS_AXP192
if (axp192_found == true) {
#ifdef HAS_PMU
if (pmu_found == true) {
playShutdownMelody();
power->shutdown();
}

44
src/sleep.cpp
Wyświetl plik

@ -19,9 +19,9 @@
esp_sleep_source_t wakeCause; // the reason we booted this time
#endif
#ifdef HAS_AXP192
#include "axp20x.h"
extern AXP20X_Class axp;
#ifdef HAS_PMU
#include "XPowersLibInterface.hpp"
extern XPowersLibInterface *PMU;
#endif
/// Called to ask any observers if they want to veto sleep. Return 1 to veto or 0 to allow sleep to happen
@ -78,10 +78,10 @@ void setLed(bool ledOn)
digitalWrite(LED_PIN, ledOn ^ LED_INVERTED);
#endif
#ifdef HAS_AXP192
if (axp192_found) {
#ifdef HAS_PMU
if (pmu_found && PMU) {
// blink the axp led
axp.setChgLEDMode(ledOn ? AXP20X_LED_LOW_LEVEL : AXP20X_LED_OFF);
PMU->setChargingLedMode(ledOn ? XPOWERS_CHG_LED_ON : XPOWERS_CHG_LED_OFF);
}
#endif
}
@ -90,9 +90,17 @@ void setGPSPower(bool on)
{
DEBUG_MSG("Setting GPS power=%d\n", on);
#ifdef HAS_AXP192
if (axp192_found)
axp.setPowerOutPut(AXP192_LDO3, on ? AXP202_ON : AXP202_OFF); // GPS main power
#ifdef HAS_PMU
if (pmu_found && PMU){
uint8_t model = PMU->getChipModel();
if(model == XPOWERS_AXP2101){
// t-beam-s3-core GNSS power channel
on ? PMU->enablePowerOutput(XPOWERS_ALDO4) : PMU->disablePowerOutput(XPOWERS_ALDO4);
}else if(model == XPOWERS_AXP192){
// t-beam GNSS power channel
on ? PMU->enablePowerOutput(XPOWERS_LDO3) : PMU->disablePowerOutput(XPOWERS_LDO3);
}
}
#endif
}
@ -185,8 +193,8 @@ void doDeepSleep(uint64_t msecToWake)
digitalWrite(VEXT_ENABLE, 1); // turn off the display power
#endif
#ifdef HAS_AXP192
if (axp192_found) {
#ifdef HAS_PMU
if (pmu_found && PMU) {
// Obsolete comment: from back when we we used to receive lora packets while CPU was in deep sleep.
// We no longer do that, because our light-sleep current draws are low enough and it provides fast start/low cost
// wake. We currently use deep sleep only for 'we want our device to actually be off - because our battery is
@ -198,7 +206,12 @@ void doDeepSleep(uint64_t msecToWake)
// in its sequencer (true?) so the average power draw should be much lower even if we were listinging for packets
// all the time.
axp.setPowerOutPut(AXP192_LDO2, AXP202_OFF); // LORA radio
uint8_t model = PMU->getChipModel();
if(model == XPOWERS_AXP2101){
PMU->disablePowerOutput(XPOWERS_ALDO3); // lora radio power channel
}else if(model == XPOWERS_AXP192){
PMU->disablePowerOutput(XPOWERS_LDO2); // lora radio power channel
}
}
#endif
@ -255,7 +268,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
#endif
#ifdef PMU_IRQ
// wake due to PMU can happen repeatedly if there is no battery installed or the battery fills
if (axp192_found)
if (pmu_found)
gpio_wakeup_enable((gpio_num_t)PMU_IRQ, GPIO_INTR_LOW_LEVEL); // pmu irq
#endif
assert(esp_sleep_enable_gpio_wakeup() == ESP_OK);
@ -284,7 +297,12 @@ void enableModemSleep()
{
static esp_pm_config_esp32_t esp32_config; // filled with zeros because bss
#if CONFIG_IDF_TARGET_ESP32S3
esp32_config.max_freq_mhz = CONFIG_ESP32S3_DEFAULT_CPU_FREQ_MHZ;
#else
esp32_config.max_freq_mhz = CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ;
#endif
esp32_config.min_freq_mhz = 20; // 10Mhz is minimum recommended
esp32_config.light_sleep_enable = false;
int rv = esp_pm_configure(&esp32_config);

29
variants/tbeam-s3-core/pins_arduino.h 100644
Wyświetl plik

@ -0,0 +1,29 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
#define EXTERNAL_NUM_INTERRUPTS 46
#define NUM_DIGITAL_PINS 48
#define NUM_ANALOG_INPUTS 20
#define analogInputToDigitalPin(p) (((p)<20)?(analogChannelToDigitalPin(p)):-1)
#define digitalPinToInterrupt(p) (((p)<48)?(p):-1)
#define digitalPinHasPWM(p) (p < 46)
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 42;
static const uint8_t SCL = 41;
static const uint8_t SS = 10;
static const uint8_t MOSI = 11;
static const uint8_t MISO = 13;
static const uint8_t SCK = 12;
#endif /* Pins_Arduino_h */

11
variants/tbeam-s3-core/platformio.ini 100644
Wyświetl plik

@ -0,0 +1,11 @@
; The 1.0 release of the LilyGo TBEAM-S3-Core board
[env:tbeam-s3-core]
extends = esp32s3_base
board = tbeam-s3-core
lib_deps =
${esp32s3_base.lib_deps}
build_flags =
${esp32s3_base.build_flags}
-Ivariants/tbeam-s3-core

49
variants/tbeam-s3-core/variant.h 100644
Wyświetl plik

@ -0,0 +1,49 @@
// #define BUTTON_NEED_PULLUP // if set we need to turn on the internal CPU pullup during sleep
#define I2C_SDA 42
#define I2C_SCL 41
#define BUTTON_PIN 0 // The middle button GPIO on the T-Beam S3
//#define BUTTON_PIN_ALT 13 // Alternate GPIO for an external button if needed. Does anyone use this? It is not documented anywhere.
// #define EXT_NOTIFY_OUT 13 // Default pin to use for Ext Notify Module.
#define LED_INVERTED 1
// #define LED_PIN 4 // Newer tbeams (1.1) have an extra led on GPIO4
// TTGO uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
// not found then probe for SX1262
#define USE_SX1262
#define USE_SX1268
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 5
#define LORA_DIO1 1 // SX1262 IRQ
#define LORA_DIO2 4 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#ifdef USE_SX1262
#define SX126X_CS 10 // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_E22 // Not really an E22 but TTGO seems to be trying to clone that
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 40
#define HAS_AXP2101
#define RF95_SCK 12
#define RF95_MISO 13
#define RF95_MOSI 11
#define RF95_NSS 10
#define GPS_RX_PIN 9
#define GPS_TX_PIN 8
#define GPS_WAKEUP_PIN 7
#define GPS_1PPS_PIN 6