Merge branch 'master' into dev

README.md

@@ -32,6 +32,7 @@ We currently support three models of radios.
   - 3D printable cases
     - [T-Beam V0](https://www.thingiverse.com/thing:3773717) (GPS and LoRa antenna misaligned if GPS placed as pictured)
     - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:3830711)
+    - [T-Beam V1 (SMA-antenna)](https://www.thingiverse.com/thing:4677388) (Mounting option for larger GPS antenna but LoRa antenna enclosed)
     - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4587297) (GPS and LoRa antenna misaligned if GPS placed as pictured)
     - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4589651)
     - [T-Beam V1 (IPEX-antenna)](https://www.thingiverse.com/thing:4619981) (GPS and LoRa antenna misaligned if GPS placed as pictured)

platformio.ini

@@ -38,8 +38,8 @@ build_flags = -Wno-missing-field-initializers -Isrc -Isrc/mesh -Isrc/gps -Ilib/n
 ;upload_port = /dev/ttyUSB0
 ;monitor_port = /dev/ttyUSB0
 
-;upload_port = /dev/cu.SLAB_USBtoUART
-;monitor_port = /dev/cu.SLAB_USBtoUART
+upload_port = /dev/cu.SLAB_USBtoUART
+monitor_port = /dev/cu.SLAB_USBtoUART
 
 ; the default is esptool
 ; upload_protocol = esp-prog

proto

@@ -1 +1 @@
-Subproject commit 323b814f4392ae0f9c42a0f14557c6b9333efce3
+Subproject commit ce422b7c448906c6fee3eef64bbd41adfbc990f0

src/Power.cpp

@@ -268,7 +268,9 @@ bool Power::axp192Init()
             DEBUG_MSG("DCDC3: %s\n", axp.isDCDC3Enable() ? "ENABLE" : "DISABLE");
             DEBUG_MSG("Exten: %s\n", axp.isExtenEnable() ? "ENABLE" : "DISABLE");
 
-            axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1320MA); // actual limit (in HW) on the tbeam is 450mA
+            //axp.setChargeControlCur(AXP1XX_CHARGE_CUR_1320MA); // actual limit (in HW) on the tbeam is 450mA
+            axp.setChargeControlCur(AXP1XX_CHARGE_CUR_450MA); // There's no HW limit on the tbeam. Setting to 450mz to be a good neighbor on the usb bus.
+            
 #if 0
 
       // Not connected

src/airtime.cpp

@@ -0,0 +1,88 @@
+#include "airtime.h"
+#include <Arduino.h>
+
+#define periodsToLog 48
+
+// A reminder that there are 3600 seconds in an hour so I don't have
+// to keep googling it.
+//   This can be changed to a smaller number to speed up testing.
+//
+uint32_t secondsPerPeriod = 3600;
+uint32_t lastMillis = 0;
+uint32_t secSinceBoot = 0;
+
+// Don't read out of this directly. Use the helper functions.
+struct airtimeStruct {
+    uint16_t periodTX[periodsToLog];
+    uint16_t periodRX[periodsToLog];
+    uint16_t periodRX_ALL[periodsToLog];
+    uint8_t lastPeriodIndex;
+} airtimes;
+
+void logAirtime(reportTypes reportType, uint32_t airtime_ms)
+{
+
+    if (reportType == TX_LOG) {
+        airtimes.periodTX[0] = airtimes.periodTX[0] + round(airtime_ms / 1000);
+    } else if (reportType == RX_LOG) {
+        airtimes.periodRX[0] = airtimes.periodRX[0] + round(airtime_ms / 1000);
+    } else if (reportType == RX_ALL_LOG) {
+        airtimes.periodRX_ALL[0] = airtimes.periodRX_ALL[0] + round(airtime_ms / 1000);
+    } else {
+        // Unknown report type
+    }
+}
+
+uint8_t currentPeriodIndex()
+{
+    return ((getSecondsSinceBoot() / secondsPerPeriod) % periodsToLog);
+}
+
+void airtimeCalculator()
+{
+    if (millis() - lastMillis > 1000) {
+        lastMillis = millis();
+        secSinceBoot++;
+        if (airtimes.lastPeriodIndex != currentPeriodIndex()) {
+            for (int i = periodsToLog - 2; i >= 0; --i) {
+                airtimes.periodTX[i + 1] = airtimes.periodTX[i];
+                airtimes.periodRX[i + 1] = airtimes.periodRX[i];
+                airtimes.periodRX_ALL[i + 1] = airtimes.periodRX_ALL[i];
+            }
+            airtimes.periodTX[0] = 0;
+            airtimes.periodRX[0] = 0;
+            airtimes.periodRX_ALL[0] = 0;
+
+            airtimes.lastPeriodIndex = currentPeriodIndex();
+        }
+    }
+}
+
+uint16_t *airtimeReport(reportTypes reportType)
+{
+    // currentHourIndexReset();
+
+    if (reportType == TX_LOG) {
+        return airtimes.periodTX;
+    } else if (reportType == RX_LOG) {
+        return airtimes.periodRX;
+    } else if (reportType == RX_ALL_LOG) {
+        return airtimes.periodRX_ALL;
+    }
+    return 0;
+}
+
+uint8_t getPeriodsToLog()
+{
+    return periodsToLog;
+}
+
+uint32_t getSecondsPerPeriod()
+{
+    return secondsPerPeriod;
+}
+
+uint32_t getSecondsSinceBoot()
+{
+    return secSinceBoot;
+}

src/airtime.h

@@ -0,0 +1,38 @@
+#pragma once
+
+#include "configuration.h"
+#include <Arduino.h>
+#include <functional>
+
+/*
+  TX_LOG      - Time on air this device has transmitted
+
+  RX_LOG      - Time on air used by valid and routable mesh packets, does not include
+                TX air time
+
+  RX_ALL_LOG  - Time of all received lora packets. This includes packets that are not
+                for meshtastic devices. Does not include TX air time.
+
+  Example analytics:
+
+  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel.
+
+  TX_LOG + RX_LOG = Total air time for a perticular meshtastic channel, including
+                    other lora radios. 
+
+  RX_ALL_LOG - RX_LOG = Other lora radios on our frequency channel.
+*/
+enum reportTypes { TX_LOG, RX_LOG, RX_ALL_LOG };
+
+void logAirtime(reportTypes reportType, uint32_t airtime_ms);
+
+void airtimeCalculator();
+
+uint8_t currentPeriodIndex();
+uint8_t getPeriodsToLog();
+
+uint32_t getSecondsSinceBoot();
+
+uint16_t *airtimeReport(reportTypes reportType);
+
+uint32_t getSecondsPerPeriod();

src/main.cpp

@@ -5,6 +5,7 @@
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "UBloxGPS.h"
+#include "airtime.h"
 #include "configuration.h"
 #include "error.h"
 #include "power.h"
@@ -569,4 +570,7 @@ void loop()
     // We want to sleep as long as possible here - because it saves power
     mainDelay.delay(delayMsec);
     // if (didWake) DEBUG_MSG("wake!\n");
+
+    // Handles cleanup for the airtime calculator.
+    airtimeCalculator();
 }

src/mesh/RadioInterface.h

@@ -5,6 +5,7 @@
 #include "MeshTypes.h"
 #include "Observer.h"
 #include "PointerQueue.h"
+#include "airtime.h"
 #include "mesh.pb.h"
 
 #define MAX_TX_QUEUE 16 // max number of packets which can be waiting for transmission

src/mesh/RadioLibInterface.cpp

@@ -58,7 +58,6 @@ void INTERRUPT_ATTR RadioLibInterface::isrTxLevel0()
  */
 RadioLibInterface *RadioLibInterface::instance;
 
-
 /** Could we send right now (i.e. either not actively receving or transmitting)? */
 bool RadioLibInterface::canSendImmediately()
 {
@@ -96,6 +95,10 @@ ErrorCode RadioLibInterface::send(MeshPacket *p)
         return res;
     }
 
+    // Count the packet toward our TX airtime utilization.
+    //   We only count it if it can be added to the TX queue.
+    logAirtime(TX_LOG, xmitMsec);
+
     // We want all sending/receiving to be done by our daemon thread, We use a delay here because this packet might have been sent
     // in response to a packet we just received.  So we want to make sure the other side has had a chance to reconfigure its radio
     startTransmitTimer(true);
@@ -205,12 +208,16 @@ void RadioLibInterface::completeSending()
 
 void RadioLibInterface::handleReceiveInterrupt()
 {
+    uint32_t xmitMsec;
     assert(isReceiving);
     isReceiving = false;
 
     // read the number of actually received bytes
     size_t length = iface->getPacketLength();
 
+    xmitMsec = getPacketTime(length);
+    logAirtime(RX_ALL_LOG, xmitMsec);
+
     int state = iface->readData(radiobuf, length);
     if (state != ERR_NONE) {
         DEBUG_MSG("ignoring received packet due to error=%d\n", state);
@@ -250,6 +257,9 @@ void RadioLibInterface::handleReceiveInterrupt()
 
             printPacket("Lora RX", mp);
 
+            xmitMsec = getPacketTime(mp);
+            logAirtime(RX_LOG, xmitMsec);
+
             deliverToReceiver(mp);
         }
     }

src/meshwifi/meshhttp.cpp

@@ -1,10 +1,11 @@
 #include "meshwifi/meshhttp.h"
 #include "NodeDB.h"
+#include "PowerFSM.h"
+#include "airtime.h"
 #include "configuration.h"
 #include "main.h"
 #include "meshhttpStatic.h"
 #include "meshwifi/meshwifi.h"
-#include "PowerFSM.h"
 #include "sleep.h"
 #include <HTTPBodyParser.hpp>
 #include <HTTPMultipartBodyParser.hpp>
@@ -64,6 +65,7 @@ void handleScanNetworks(HTTPRequest *req, HTTPResponse *res);
 void handleSpiffsBrowseStatic(HTTPRequest *req, HTTPResponse *res);
 void handleSpiffsDeleteStatic(HTTPRequest *req, HTTPResponse *res);
 void handleBlinkLED(HTTPRequest *req, HTTPResponse *res);
+void handleReport(HTTPRequest *req, HTTPResponse *res);
 
 void middlewareSpeedUp240(HTTPRequest *req, HTTPResponse *res, std::function<void()> next);
 void middlewareSpeedUp160(HTTPRequest *req, HTTPResponse *res, std::function<void()> next);
@@ -80,7 +82,7 @@ char contentTypes[][2][32] = {{".txt", "text/plain"},     {".html", "text/html"}
                               {".js", "text/javascript"}, {".png", "image/png"},
                               {".jpg", "image/jpg"},      {".gz", "application/gzip"},
                               {".gif", "image/gif"},      {".json", "application/json"},
-                              {".css", "text/css"},       {".ico","image/vnd.microsoft.icon"},
+                              {".css", "text/css"},       {".ico", "image/vnd.microsoft.icon"},
                               {".svg", "image/svg+xml"},  {"", ""}};
 
 void handleWebResponse()
@@ -248,6 +250,7 @@ void initWebServer()
     ResourceNode *nodeFormUpload = new ResourceNode("/upload", "POST", &handleFormUpload);
     ResourceNode *nodeJsonScanNetworks = new ResourceNode("/json/scanNetworks", "GET", &handleScanNetworks);
     ResourceNode *nodeJsonBlinkLED = new ResourceNode("/json/blink", "POST", &handleBlinkLED);
+    ResourceNode *nodeJsonReport = new ResourceNode("/json/report", "GET", &handleReport);
     ResourceNode *nodeJsonSpiffsBrowseStatic = new ResourceNode("/json/spiffs/browse/static/", "GET", &handleSpiffsBrowseStatic);
     ResourceNode *nodeJsonDelete = new ResourceNode("/json/spiffs/delete/static", "DELETE", &handleSpiffsDeleteStatic);
 
@@ -267,6 +270,7 @@ void initWebServer()
     secureServer->registerNode(nodeJsonBlinkLED);
     secureServer->registerNode(nodeJsonSpiffsBrowseStatic);
     secureServer->registerNode(nodeJsonDelete);
+    secureServer->registerNode(nodeJsonReport);
     secureServer->setDefaultNode(node404);
 
     secureServer->addMiddleware(&middlewareSpeedUp240);
@@ -287,6 +291,7 @@ void initWebServer()
     insecureServer->registerNode(nodeJsonBlinkLED);
     insecureServer->registerNode(nodeJsonSpiffsBrowseStatic);
     insecureServer->registerNode(nodeJsonDelete);
+    insecureServer->registerNode(nodeJsonReport);
     insecureServer->setDefaultNode(node404);
 
     insecureServer->addMiddleware(&middlewareSpeedUp160);
@@ -1041,6 +1046,98 @@ void handleBlinkLED(HTTPRequest *req, HTTPResponse *res)
     res->println("}");
 }
 
+void handleReport(HTTPRequest *req, HTTPResponse *res)
+{
+
+    ResourceParameters *params = req->getParams();
+    std::string content;
+
+    if (!params->getQueryParameter("content", content)) {
+        content = "json";
+    }
+
+    if (content == "json") {
+        res->setHeader("Content-Type", "application/json");
+
+    } else {
+        res->setHeader("Content-Type", "text/html");
+        res->println("<pre>");
+    }
+
+    res->println("{");
+
+    res->println("\"data\": {");
+
+    res->println("\"airtime\": {");
+
+    uint16_t *logArray;
+
+    res->print("\"tx_log\": [");
+
+    logArray = airtimeReport(TX_LOG);
+    for (int i = 0; i < getPeriodsToLog(); i++) {
+        uint16_t tmp;
+        tmp = *(logArray + i);
+        res->printf("%d", tmp);
+        if (i != getPeriodsToLog() - 1) {
+            res->print(", ");
+        }
+    }
+
+    res->println("],");
+    res->print("\"rx_log\": [");
+
+    logArray = airtimeReport(RX_LOG);
+    for (int i = 0; i < getPeriodsToLog(); i++) {
+        uint16_t tmp;
+        tmp = *(logArray + i);
+        res->printf("%d", tmp);
+        if (i != getPeriodsToLog() - 1) {
+            res->print(", ");
+        }
+    }
+
+    res->println("],");
+    res->print("\"rx_all_log\": [");
+
+    logArray = airtimeReport(RX_ALL_LOG);
+    for (int i = 0; i < getPeriodsToLog(); i++) {
+        uint16_t tmp;
+        tmp = *(logArray + i);
+        res->printf("%d", tmp);
+        if (i != getPeriodsToLog() - 1) {
+            res->print(", ");
+        }
+    }
+
+    res->println("],");
+    res->printf("\"seconds_since_boot\": %u,\n", getSecondsSinceBoot());
+    res->printf("\"seconds_per_period\": %u,\n", getSecondsPerPeriod());
+    res->printf("\"periods_to_log\": %u\n", getPeriodsToLog());
+
+    res->println("},");
+
+    res->println("\"wifi\": {");
+
+    res->println("\"rssi\": " + String(WiFi.RSSI()) + ",");
+
+    if (radioConfig.preferences.wifi_ap_mode || isSoftAPForced()) {
+        res->println("\"ip\": \"" + String(WiFi.softAPIP().toString().c_str()) + "\"");
+    } else {
+        res->println("\"ip\": \"" + String(WiFi.localIP().toString().c_str()) + "\"");
+    }
+
+
+    res->println("},");
+
+    res->println("\"test\": 123");
+
+    res->println("},");
+
+    res->println("\"status\": \"ok\"");
+    res->println("}");
+}
+
 void handleScanNetworks(HTTPRequest *req, HTTPResponse *res)
 {
     res->setHeader("Content-Type", "application/json");