sforkowany z mirror/meshtastic-firmware
Kevin Hester
GitHub
commit
b071eecce1
57
README.md
57
README.md
|
|
@ -1,39 +1,43 @@
|
|||
# Meshtastic-esp32
|
||||
This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project.
|
||||
|
||||
This is the device side code for the [meshtastic.org](https://www.meshtastic.org) project.
|
||||
|
||||
|
||||
|
||||
Meshtastic is a project that lets you use
|
||||
inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
|
||||
essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
|
||||
inexpensive GPS mesh radios as an extensible, super long battery life mesh GPS communicator. These radios are great for hiking, skiing, paragliding -
|
||||
essentially any hobby where you don't have reliable internet access. Each member of your private mesh can always see the location and distance of all other
|
||||
members and any text messages sent to your group chat.
|
||||
|
||||
The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios
|
||||
The radios automatically create a mesh to forward packets as needed, so everyone in the group can receive messages from even the furthest member. The radios
|
||||
will optionally work with your phone, but no phone is required.
|
||||
|
||||
Typical time between recharging the radios should be about eight days.
|
||||
|
||||
This project is currently early-alpha, but if you have questions please [join our discussion forum](https://meshtastic.discourse.group/).
|
||||
|
||||
This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the chat.
|
||||
This software is 100% open source and developed by a group of hobbyist experimenters. No warranty is provided, if you'd like to improve it - we'd love your help. Please post in the chat.
|
||||
|
||||
## Supported hardware
|
||||
We currently support three models of radios. The [TTGO T-Beam](https://www.aliexpress.com/item/4000119152086.html), [TTGO LORA32](https://www.banggood.com/LILYGO-TTGO-LORA32-868Mhz-SX1276-ESP32-Oled-Display-bluetooth-WIFI-Lora-Development-Module-Board-p-1248652.html?cur_warehouse=UK) and the [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/). Most users should buy the T-Beam and a 18650 battery (total cost less than $35). Make
|
||||
sure to buy the frequency range which is legal for your country. For the USA, you should buy the 915MHz version. Getting a version that include a screen
|
||||
|
||||
We currently support three models of radios. The [TTGO T-Beam](https://www.aliexpress.com/item/4000119152086.html), [TTGO LORA32](https://www.banggood.com/LILYGO-TTGO-LORA32-868Mhz-SX1276-ESP32-Oled-Display-bluetooth-WIFI-Lora-Development-Module-Board-p-1248652.html?cur_warehouse=UK) and the [Heltec LoRa 32](https://heltec.org/project/wifi-lora-32/). Most users should buy the T-Beam and a 18650 battery (total cost less than \$35). Make
|
||||
sure to buy the frequency range which is legal for your country. For the USA, you should buy the 915MHz version. Getting a version that include a screen
|
||||
is optional, but highly recommended.
|
||||
|
||||
See (meshtastic.org) for 3D printable cases.
|
||||
|
||||
## Installing the firmware
|
||||
Prebuilt binaries for the supported radios is available in our [releases](https://github.com/meshtastic/Meshtastic-esp32/releases). Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
|
||||
|
||||
The instructions currently require a few commmand lines, but it should be pretty straightforward. Please post comments on our group chat if you have problems or successes. Steps to install:
|
||||
Prebuilt binaries for the supported radios is available in our [releases](https://github.com/meshtastic/Meshtastic-esp32/releases). Your initial installation has to happen over USB from your Mac, Windows or Linux PC. Once our software is installed, all future software updates happen over bluetooth from your phone.
|
||||
|
||||
The instructions currently require a few commmand lines, but it should be pretty straightforward. Please post comments on our group chat if you have problems or successes. Steps to install:
|
||||
|
||||
1. Purchase a radio (see above) with the correct frequencies for your country (915MHz for US or JP, 470MHz for CN, 433MHz and 870MHz for EU).
|
||||
2. Install "pip". Pip is the python package manager we use to get the esptool installer app. Instructions [here](https://www.makeuseof.com/tag/install-pip-for-python/).
|
||||
2. Install "pip". Pip is the python package manager we use to get the esptool installer app. Instructions [here](https://www.makeuseof.com/tag/install-pip-for-python/).
|
||||
3. Run "pip install --upgrade esptool" to get esptool installed on your machine
|
||||
4. Connect your radio to your USB port
|
||||
5. Confirm that your device is talking to your PC by running "esptool.py chip_id". The Heltec build also works on the TTGO LORA32 radio. You should see something like:
|
||||
5. Confirm that your device is talking to your PC by running "esptool.py chip_id". The Heltec build also works on the TTGO LORA32 radio. You should see something like:
|
||||
|
||||
```
|
||||
mydir$ esptool.py chip_id
|
||||
esptool.py v2.6
|
||||
|
|
@ -51,14 +55,16 @@ Warning: ESP32 has no Chip ID. Reading MAC instead.
|
|||
MAC: 24:6f:28:b5:36:71
|
||||
Hard resetting via RTS pin...
|
||||
```
|
||||
6. cd into the directory where the release zip file was expanded.
|
||||
7. Install the correct firmware for your board with "device-install.sh firmware-_board_-_country_.bin". For instance "./device-install.sh firmware-HELTEC-US-0.0.3.bin".
|
||||
|
||||
Note: If you have previously installed meshtastic, you don't need to run this full script instead just run "esptool.py --baud 921600 write_flash 0x10000 firmware-_board_-_country_.bin". This will be faster, also all of your current preferences will be preserved.
|
||||
6. cd into the directory where the release zip file was expanded.
|
||||
7. Install the correct firmware for your board with "device-install.sh firmware-_board_-_country_.bin". For instance "./device-install.sh firmware-HELTEC-US-0.0.3.bin".
|
||||
|
||||
Note: If you have previously installed meshtastic, you don't need to run this full script instead just run "esptool.py --baud 921600 write*flash 0x10000 firmware-\_board*-_country_.bin". This will be faster, also all of your current preferences will be preserved.
|
||||
|
||||
You should see something like this:
|
||||
|
||||
```
|
||||
kevinh@kevin-server:~/development/meshtastic/meshtastic-esp32/release/latest$ ./device-install.sh firmware-TBEAM-US-0.1.8.bin
|
||||
kevinh@kevin-server:~/development/meshtastic/meshtastic-esp32/release/latest$ ./device-install.sh firmware-TBEAM-US-0.1.8.bin
|
||||
Trying to flash firmware-TBEAM-US-0.1.8.bin, but first erasing and writing system information
|
||||
esptool.py v2.6
|
||||
Found 2 serial ports
|
||||
|
|
@ -120,29 +126,32 @@ Hash of data verified.
|
|||
Leaving...
|
||||
Hard resetting via RTS pin...
|
||||
```
|
||||
|
||||
8. The board will boot and show the Meshtastic logo.
|
||||
9. Please post a comment on our chat so we know if these instructions worked for you ;-). If you find bugs/have-questions post there also - we will be rapidly iterating over the next few weeks.
|
||||
9. Please post a comment on our chat so we know if these instructions worked for you ;-). If you find bugs/have-questions post there also - we will be rapidly iterating over the next few weeks.
|
||||
|
||||
## Meshtastic Android app
|
||||
The source code for the (optional) Meshtastic Android app is [here](https://github.com/meshtastic/Meshtastic-Android).
|
||||
|
||||
Alpha test builds are current available by opting into our alpha test group. See (www.meshtastic.org) for instructions.
|
||||
The source code for the (optional) Meshtastic Android app is [here](https://github.com/meshtastic/Meshtastic-Android).
|
||||
|
||||
Alpha test builds are current available by opting into our alpha test group. See (www.meshtastic.org) for instructions.
|
||||
|
||||
After our rate of change slows a bit, we will make beta builds available here (without needing to join the alphatest group):
|
||||
[](https://play.google.com/store/apps/details?id=com.geeksville.mesh&referrer=utm_source%3Dgithub%26utm_medium%3Desp32-readme%26utm_campaign%3Dmeshtastic-esp32%2520readme%26anid%3Dadmob&pcampaignid=pcampaignidMKT-Other-global-all-co-prtnr-py-PartBadge-Mar2515-1)
|
||||
|
||||
# Development
|
||||
|
||||
We'd love to have you join us on this merry little project. Please see our [development documents](./docs/software/sw-design.md) and [join us in our discussion forum](https://meshtastic.discourse.group/).
|
||||
We'd love to have you join us on this merry little project. Please see our [development documents](./docs/software/sw-design.md) and [join us in our discussion forum](https://meshtastic.discourse.group/).
|
||||
|
||||
# Credits
|
||||
|
||||
This project is run by volunteers. Past contributors include:
|
||||
This project is run by volunteers. Past contributors include:
|
||||
|
||||
* @astro-arphid: Added support for 433MHz radios in europe.
|
||||
* @claesg: Various documentation fixes and 3D print enclosures
|
||||
* @girtsf: So far our CI system, but soon lots of device improvements
|
||||
- @astro-arphid: Added support for 433MHz radios in europe.
|
||||
- @claesg: Various documentation fixes and 3D print enclosures
|
||||
- @girtsf: Lots of improvements
|
||||
- @spattinson: Fixed interrupt handling for the AXP192 part
|
||||
|
||||
# IMPORTANT DISCLAIMERS AND FAQ
|
||||
|
||||
For a listing of currently missing features and a FAQ click [here](docs/faq.md).
|
||||
For a listing of currently missing features and a FAQ click [here](docs/faq.md).
|
||||
|
|
|
|||
|
|
@ -401,10 +401,7 @@ void _screen_header()
|
|||
}
|
||||
#endif
|
||||
|
||||
Screen::Screen(uint8_t address, uint8_t sda, uint8_t scl)
|
||||
: cmdQueue(32), useDisplay(sda || scl), dispdev(address, sda, scl), ui(&dispdev)
|
||||
{
|
||||
}
|
||||
Screen::Screen(uint8_t address, uint8_t sda, uint8_t scl) : cmdQueue(32), dispdev(address, sda, scl), ui(&dispdev) {}
|
||||
|
||||
void Screen::handleSetOn(bool on)
|
||||
{
|
||||
|
|
@ -425,8 +422,9 @@ void Screen::handleSetOn(bool on)
|
|||
|
||||
void Screen::setup()
|
||||
{
|
||||
if (!useDisplay)
|
||||
return;
|
||||
// We don't set useDisplay until setup() is called, because some boards have a declaration of this object but the device
|
||||
// is never found when probing i2c and therefore we don't call setup and never want to do (invalid) accesses to this device.
|
||||
useDisplay = true;
|
||||
|
||||
dispdev.resetOrientation();
|
||||
|
||||
|
|
|
|||
12
src/screen.h
12
src/screen.h
|
|
@ -40,7 +40,7 @@ class DebugInfo
|
|||
|
||||
/// Sets battery/charging/etc status.
|
||||
//
|
||||
void setPowerStatus(const PowerStatus& status)
|
||||
void setPowerStatus(const PowerStatus &status)
|
||||
{
|
||||
LockGuard guard(&lock);
|
||||
powerStatus = status;
|
||||
|
|
@ -169,9 +169,13 @@ class Screen : public PeriodicTask
|
|||
/// Enques given command item to be processed by main loop().
|
||||
bool enqueueCmd(const CmdItem &cmd)
|
||||
{
|
||||
bool success = cmdQueue.enqueue(cmd, 0);
|
||||
setPeriod(1); // handle ASAP
|
||||
return success;
|
||||
if (!useDisplay)
|
||||
return true; // claim success if our display is not in use
|
||||
else {
|
||||
bool success = cmdQueue.enqueue(cmd, 0);
|
||||
setPeriod(1); // handle ASAP
|
||||
return success;
|
||||
}
|
||||
}
|
||||
|
||||
// Implementations of various commands, called from doTask().
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue