bidir comm works

TODO.md

@@ -1,5 +1,6 @@
 # High priority
 
+* check in my radiolib fixes
 * test raw device access without a manager in the way
 * sim gps data for nodes that don't have hardware
 * figure out what is busted with rx
@@ -93,3 +94,4 @@ until the phone pulls those packets.  Ever so often power on bluetooth just so w
 * have meshservice periodically send location data on mesh (if device has a GPS)
 * implement getCurrentTime() - set based off gps but then updated locally
 * make default owner record have valid usernames
+* message loop between node 0x28 and 0x7c

lib/RadioHead

@@ -0,0 +1 @@
+../../RadioHead

platformio.ini

@@ -13,6 +13,7 @@
 [env:esp32]
 platform = espressif32
 board = ttgo-t-beam
+; board = heltec_wifi_lora_32_V2
 framework = arduino
 
 ; customize the partition table
@@ -43,7 +44,7 @@ monitor_speed = 115200
 # debug_port = /dev/ttyACM0
 
 debug_tool = jlink
-; upload_protocol = jlink
+;upload_protocol = jlink
 
 ; debug_tool = olimex-arm-usb-ocd-h
 ; upload_protocol = olimex-arm-usb-ocd-h
@@ -54,11 +55,13 @@ debug_tool = jlink
 debug_init_break = tbreak setup
 
 lib_deps =
-  RadioHead
+  ; RadioHead - I now use a custom build of this library
+  ; file:///home/kevinh/development/meshtastic/RadioHead
   TinyGPSPlus
   ESP8266_SSD1306
   AXP202X_Library
   SPI
+  CRC32 ; explicitly needed because dependency is missing in the ble ota update lib
   Wire ; explicitly needed here because the AXP202 library forgets to add it
 
 ;[env:tbeam] 

src/MeshRadio.cpp

@@ -63,6 +63,7 @@ bool MeshRadio::init()
   // FIXME - can we do this?  It seems to be in the Heltec board.
   rf95.setTxPower(radioConfig.tx_power, false);
 
+
   DEBUG_MSG("LoRa radio init OK!\n");
 
   return true;
@@ -77,8 +78,6 @@ ErrorCode MeshRadio::send(MeshPacket *p)
 ErrorCode MeshRadio::sendTo(NodeNum dest, const uint8_t *buf, size_t len)
 {
   DEBUG_MSG("mesh sendTo %d bytes to 0x%x\n", len, dest);
-  // FIXME - for now we do all packets as broadcast
-  dest = NODENUM_BROADCAST;
 
   assert(len <= 255); // Make sure we don't overflow the tiny max packet size
 

src/MeshService.cpp

@@ -74,6 +74,13 @@ void MeshService::loop()
         }
 
         fromNum++;
+
+        if(toPhoneQueue.numFree() == 0) {
+            DEBUG_MSG("NOTE: tophone queue is full, discarding oldest\n");
+            MeshPacket *d = toPhoneQueue.dequeuePtr(0);
+            if(d)
+                releaseToPool(d);
+        }
         assert(toPhoneQueue.enqueue(mp, 0) == pdTRUE); // FIXME, instead of failing for full queue, delete the oldest mssages
     }
     if (oldFromNum != fromNum) // We don't want to generate extra notifies for multiple new packets

src/TypedQueue.h

@@ -19,6 +19,10 @@ public:
         vQueueDelete(h);
     }
 
+    int numFree() {
+        return uxQueueSpacesAvailable(h);
+    }
+
     // pdTRUE for success else failure
     BaseType_t enqueue(T x, TickType_t maxWait = portMAX_DELAY) {
         return xQueueSendToBack(h, &x, maxWait);

src/configuration.h

@@ -37,18 +37,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // -----------------------------------------------------------------------------
 
 // Select which T-Beam board is being used. Only uncomment one.  Note: these options now come from platformio standard build file flags
-#ifdef ARDUINO_T_Beam
+//#ifdef ARDUINO_T_Beam
 #define T_BEAM_V10  // AKA Rev1 (second board released)
-#endif 
+//#endif 
 
-#ifdef ARDUINO_HELTEC_WIFI_LORA_32_V2
-#define HELTEC_LORA32
-#endif
+//#ifdef ARDUINO_HELTEC_WIFI_LORA_32_V2
+//#define HELTEC_LORA32
+//#endif
 
 // If we are using the JTAG port for debugging, some pins must be left free for that (and things like GPS have to be disabled)
 // we don't support jtag on the ttgo - access to gpio 12 is a PITA
 #ifdef HELTEC_LORA32
-#define USE_JTAG
+//#define USE_JTAG
 #endif
 
 #define DEBUG_PORT              Serial      // Serial debug port